I can pair my BT620 Jabra headset fine. I can select the headset and wireless stereo services but i cant use the headset. Im using the 6.1 Pro
I re-paired the devices a few times and it works.
Related
Can you, for example, simultaneously have a BT Headset and BT Handsfree with both working properly. Currently the mic. doesn't work on Handsfree (and it should work).
Does it have an improved Windows BT implementation or is it based on Widcomm?
Thanks
Yes, I have just tested it for you. I have paired a BT GPS, a Mr Handsfree Headset and a handsfree carkit. All the devices work fine. Alse all the functionality of my carkit is working.
Thanks,
Does it have a more organised Bluetooth Manager? On the XDA II (WM2003) it is very inadequate. The microphone is turned off in the handsfree profile for example and you can only define one headset amd one handfree device.
**** Campbell
hi all
i've read that there is the possibility to listen to ttn5's voice in BT headset while himalaya is paired with gps BT receiver.
I even read that, making this system upgrading, headset's functions are disabled.
is it true?
is there the possibility to listen to ttn5's voice while bt receiver is paired AND mantain headset/handsfree's functions?
I've wm2003 se 2.06 installed
thanks all
it is with this headset and others which use the same tech
http://www.bluetake.com/products/BT420EX.htm
with the dongle
otherwise i've also heard that using the other bluetooth stack to enable A2DP (normal sound over bluetooth) dont want to work with the normal phone headset profile
Rudegar said:
it is with this headset and others which use the same tech
http://www.bluetake.com/products/BT420EX.htm
with the dongle
otherwise i've also heard that using the other bluetooth stack to enable A2DP (normal sound over bluetooth) dont want to work with the normal phone headset profile
Click to expand...
Click to collapse
yes, i've heard it too... well.. i would pair a SonyEricsson HBH-200 'cause it's the only one i can wear under the helmet
thx
Hi,
has anyone yet had success in connecting e.g. a BT GPS receiver and a wireless headset at the same time to the wizard? I'm currently thinking about buying a BT-Headset, but don't want to miss the GPS navigation at the same time...
Thanks, Horst
yeah I've done it a bunch of times.
it works ok with a standard bt ear set but if you try the higher quality stereo set up i had all sorts of problems. The audio would slow down as the data wasnt getting through quick enough, then when it got the data it would play it fast to catch up to where it should be.
Two bluetooth devices
I have had no problems connecting a bluetooth GPS device and a Motorola headset at the same time.
I find the devices are more reliable if the bluetooth is connected first, then the headset.
When receiving a call on the headset the GPS and TomTom continue to work BUT I lose the sound from the TomTom programme - which has never caused any problems.
Cegmawr, have you done this using a BT Stereo Headset like the HT820? or using a standar mono BT headset?
I have an HT820 and when the GPS is on, i loose the Audio, it starts skipping
Make sure devices are Bluetooth 2 not 1.1
I had a Bluetooth 2 GPS and a bluetooth 1.1 hansfree speaker - bioth kept dropping out.
I now have a bluetooth 2.0 GOS and am using a Seimend Bluetooth Car Kit - all works perfectly, as it does with Nokia nd SoneyEric bluetooth headsets... seem s to me that Bluetooth 2 is the key.
Also, TomTom automatically mutes itself if you're in a call, nothing to do with Bluetooth.
Hello,
I bought a Jabra BT3030 lookalike, expecting to use it to control the Blackstone, which will have wired headphones connected directly to the 3.5 jack (best sound quality, convenience of a remote, and I expect long battery life).
However I cannot get the sound to come through the headset if the remote works. It looks like if a stereo headset is connected, all sound will be sent to it (if I connect the headset to the BT receiver, it works fine).
I tried switcha2dp but if I switch off AD2P, the remote stops working.
I hoped to use only the AVRCP profile when pairing, but that is not an option (I only have "handsfree" or "wireless stereo", "handsfree" does not work for music/remote).
Can anyone offer any advice? I'd like to disable AD2P while keeping AVRCP but I can't seem to find a way...
Thanks,
Did you ever find a solution to this? I am in the exact same situation
My Jabra Halo headset used to work flawlessly with firmwares up to KF1... Same with the wired headset and Skype.
It hasn't been working since, only the headset speakers work fine, however the microphone on the headset does not work anymore.
Can you guys check if you also have this problem or is there anyone, that successfully uses some Bluetooth headset with Skype on i9100?