TouchPro hardware KeyBoard - Touch Pro, Fuze ROM Development

Hi,
I want to know if it's possible to flash TouchPro with an English ROM and applicate a patch to get azerty keyboard.
I get a french HTC Touch Pro and there are not so much good french ROM.
It's hard to tape in qwerty mode with a physical azerty keyboard
Thx by advance
best regards,
Spiky33.

Spiky33 said:
Hi,
I want to know if it's possible to flash TouchPro with an English ROM and applicate a patch to get azerty keyboard.
I get a french HTC Touch Pro and there are not so much good french ROM.
It's hard to tape in qwerty mode with a physical azerty keyboard
Thx by advance
best regards,
Spiky33.
Click to expand...
Click to collapse
Start searching the forum for translating ROMS it takes some time to learn, but then you can turn any rom you like in french.. just a tip

Spiky33 said:
Hi,
I want to know if it's possible to flash TouchPro with an English ROM and applicate a patch to get azerty keyboard.
I get a french HTC Touch Pro and there are not so much good french ROM.
It's hard to tape in qwerty mode with a physical azerty keyboard
Thx by advance
best regards,
Spiky33.
Click to expand...
Click to collapse
there's a rom called ROMEOS (edition francaise) which is really good. that's what I'm using on my french TP. For the azerty, here's the link : http://forum.xda-developers.com/showthread.php?t=426174 Remember, search is your best friend.

Hi all,
I have a french TOUCH PRO but a WWE Rom ROMEOS 1.40.
Can someone post the Touch PRO AZERTY keyboard mapping?
I don't want putting a French ROM on this device.
Thanks a lot for you help, it's very annoying to type with a bad mapping.

I found it:
open registry and go there:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
I modified CurLang to 1036 for AZERTY FR Keyboard
Hope this can help someone

Right, you can allways bring your Hardwear keyboard back to you own language no matter what rom you are using!

Thibale said:
I found it:
open registry and go there:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
I modified CurLang to 1036 for AZERTY FR Keyboard
Hope this can help someone
Click to expand...
Click to collapse
where did you find the code 1036? i have a qwerty keyboard but could not fix the problem.
I tried 1033 dec / 0409 hex but stll not a good mapping, someone?

I found the country code 1036 in this forum (AZERY FR only)
Remember to soft reset your device after modifiying the registry or it won't work

merten3000 said:
Start searching the forum for translating ROMS it takes some time to learn, but then you can turn any rom you like in french.. just a tip
Click to expand...
Click to collapse
I'd like to turn this rom "|RAPH|6.5|ROM|WWE| ★ EnergyROM 3.0 'Phoenix' (21812) ★ || Build date 2009/6/12 ||" into french ...
What can I do to turn the entire rom in french (or at least the keyboard) ?

Nobody can help me ?

VitaPSG said:
I'd like to turn this rom "|RAPH|6.5|ROM|WWE| ★ EnergyROM 3.0 'Phoenix' (21812) ★ || Build date 2009/6/12 ||" into french ...
What can I do to turn the entire rom in french (or at least the keyboard) ?
Click to expand...
Click to collapse
Dear VitaPSG,
As you can see the ROM's name is «|RAPH|6.5|ROM|WWE| ★ EnergyROM 3.0 'Phoenix' (21812) ★ || Build date 2009/6/12 ||».
Let's break the name apart and split it in components explaining the meaning of each one:
|RAPH|
Device it is intended to work on: Raphael
6.5
Windows Mobile Version
|ROM|
Statement declaring it is actually a ROM and not a tennis ball or a golf club
|WWE|
Language of the ROM: World Wide English
★ EnergyROM
Name of the ROM [the little star is merely decorative...]
3.0
Cook's version of the ROM or ROM series
'Phoenix'
Cook's name of the above referred ROM series
(21812) ★
Core version [the little star is merely decorative...]
|| Build date 2009/6/12 ||
Build date, as the reference itself states: June the 12th of 2009
NOTES
- In order for the «entire ROM» to be in french it should be FRE instead of WWE
- If you want the «entire ROM» to be in french you will have to cook it that way with the proper handlers and language pack
So... Cutting to the chase, no you can't translate the «entire ROM» to french.
Regarding keyboard layout change:
- Look at the suggestions that other users made you in this very thread
- Give it a try [I am not sure if it works because I never had to try it or even think of such issue].
If you get nowhere by doing this I suggest you PM the cook and ask him to point you in the right direction.
Good luck on your quest.
Cheers.

heyho,
for the hardwarekeyboard visit the wiki, it does not bring you the swine flu. http://wiki.xda-developers.com/index.php?pagename=Raphael_Keyboard
for the softwarekeyboard, (on the raph) start-->settings-->personal->input ; input method, options, choose french. softrest. that should help. (for the energy rom at least)
garans
p.s.: learn english, then you do not have to translate it to french english helps in the WWW, even it is not the best, like mine.
garans

VitaPSG,
You would be more likely to get help by starting a new post, rather than piggy-backing someone else's post.
Just a tip!
- Adam

Keyboard issue
yo ive got a problem with my touch pro.
my hardware keyboard is mucked up. all the letters work fine but numbers arent working, for example .
wen i press number 4 it writes "!" wen i press 5 its "(" and 6 is ")" and so on. also wen i press the number 1 it brings up the start menu and wen i press "FN" it brings up the callendar.
i tried factory defaulting , nothing. i tried looking for the option for it . and i cant find anything.
can anyone help me ?
thanks in advance.
Wuchacarlse.

Hello
I'm french, and i use "EnergyROM_RAPHAEL_20090729_Standard"
if you want the keyb in fr do this :
1 - run "Shlomki TouchPro Keyboard in Fuze ROM.cab" found in xda forum
2 - use a registery editor like regedit.Mrln_ARM.CAB
and change :
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Keyboard Layout]
00000409 to 0000040c
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
1033 to 1036
after in start ---> personal ---> input ---> choose : full querty and clic on "option" and in "language choose "french"
do a soft reset
after this you have a azerty keybord in hardware keybord an in internal keyboard
j'espere que ca marchera sinon envoi un message perso....

all the settings without the Shlomki TouchPro Keyboard in Fuze ROM.cab don't resolve the hardware key mapping. just got a raphael and i've noticed it's with french keyboard so i needed to make this changes coz the hardware key mapping was absolutely wrong.
thanks alot ugo83130

Related

German Input (formally known as German Language Changer) - WM5 and WM6 Support

Hi,
i cooked a file, that change the following into german language:
Keyboard layout
Suggested words dictionary
Spellcheck dictionary
Symbols List
I testet it with any english rom and it works perfect for me.
And NO: Windows will still be in english.
Means,
you can use an english ROM, but everything except the menue works "german" now?
N1ce
Thank you
Can you give information about the rom version you used?
I tried it on the 1.34 Cingular and didn't worked. In fact none of the tips I found to change keyboard language are working till now.
TinyRK said:
Means,
you can use an english ROM, but everything except the menue works "german" now?
N1ce
Thank you
Click to expand...
Click to collapse
Yes If I have time, I could do it for any language that I found. Mhh, maybe with a REAL changer-mode.
@fedaykin:
I could not test it with Cingular 1.31 and 1.34, because I have bootloader 1.04 and dont want to "upgrade" to 1.06...
Only the keyboard layout does not work or all of the 4 points does not work?
Seems that none of them is working.
I had the same issue when I tried to hack the registry to change the keyboard manually. it never changes.
Hi,
I updated the installer (automatic installation in device) and compressed it a little bit.
Download in Top post.
This works with WM XDA Live too.
You only have to rename the "sym.txt" in "sym.0409.txt" in Windows Folder.
Thanks für this !
BongoUser said:
This works with WM XDA Live too.
You only have to rename the "sym.txt" in "sym.0409.txt" in Windows Folder.
Thanks für this !
Click to expand...
Click to collapse
And so I decided to make a installer for Crossbow too.
I also renamed it "German Input" (it's a little bit clearer).
Download in top post
did not work on XDA live ROM
Applestar said:
did not work on XDA live ROM
Click to expand...
Click to collapse
hm, what of the 4 points in top thread doesn't work? all not working?
Good work
querschlaeger said:
hm, what of the 4 points in top thread doesn't work? all not working?
Click to expand...
Click to collapse
I installed it. All 4 points work at my device.
Danke
char05
wizard vpa, wm6 mb
does not work at all :-(
does anyone have an idea how to change the soft keyboard without using resco keybd?
shadow# said:
wizard vpa, wm6 mb
does not work at all :-(
Click to expand...
Click to collapse
Here is Hermes Forum....
shadow# said:
does anyone have an idea how to change the soft keyboard without using resco keybd?
Click to expand...
Click to collapse
Yes, you need the "MSIMDE.DLL" (and i think MSIMDE.96.DLL) for German Soft Keyboard and a lot of registry keys.
I have found a MSIMDE.DLL in Internet (without the MSIMDE.96.DLL) and
i have test it, but it don't work for me... i hope someoe can help here.
Perhaps someone can extract this files from a WM5 ROM for testing...
Code:
[HKCR,"CLSID\{615623e0-a400-11d1-8910-0000f81ea21f}"]
(Default) = "German Keyboard"
"KBMode" = 5 (DWORD)
[HKCR,"CLSID\{615623e0-a400-11d1-8910-0000f81ea21f}\DefaultIcon"]
(Default) = "msimde.dll,0"
[HKCR,"CLSID\{615623e0-a400-11d1-8910-0000f81ea21f}\InprocServer32"]
(Default) = "msimde.dll"
[HKCR,"CLSID\{615623e0-a400-11d1-8910-0000f81ea21f}\IsSIPInputMethod"]
(Default) = "1"
I need but with Portuguese Language
querschlaeger: Could you make it for portugueses (Portugal) language instead of german? I have an German MDA Vario II with a xda live rom (WM6) in english. So I need to fix the qwertz keyboard and have T9 for portuguese language, Could you do that? Thank you
Works fine except the space key to change a to ä (Hermes, WM6)
Hi querschlaeger,
I would be happy to do the same for french. But my question is : Where did you found the files to do it ? From German WM5 ROM? Or from a German WM6 ROM.
Thanks
thx querschlaeger, i love you for this!
do you know if its possible to translate the whole available WM6 roms or is that too much work/not possible?
change the language
i heard that it's possible to extract the language(inside the WM5) and to put inside the WM6 vanilla,to change language, but my question is, what files exactly?
ready to help too
Atmis said:
Hi querschlaeger,
I would be happy to do the same for french. But my question is : Where did you found the files to do it ? From German WM5 ROM? Or from a German WM6 ROM.
Thanks
Click to expand...
Click to collapse
I'm ready to help and do some testing too
got two french Hermes devices with AZERTY keyboard
one running WMXL v0.10 ROM, one running 'original' french Vodaphone ROM
I tried the registry tweaks explained in the Wiki
to switch my keyboard layout to french/AZERTY
it worked with every WM5 ROM but not with WM6...
mm212hd130 said:
I tried the registry tweaks explained in the Wiki
to switch my keyboard layout to french/AZERTY
it worked with every WM5 ROM but not with WM6...
Click to expand...
Click to collapse
Tu dois faire ceci
HKLM\software\oem\qwerty\00020409
en
HKLM\software\oem\qwerty\0002040c
soft reset avec le bouton on/off.

Keyboard layout problems

So as the others that got similar problems, I had layout problems when upgrading to windows mobile 6.
Device: HTC TyTN, English keyboard (exactly like on the official pics), Rogers Wireless (Canada), unlocked thanks to you guys!
ROM: Official WM6 French ROM from HTC
I recently bought an French HTC TyTN with Rogers (in Canada). I unlocked it and upgraded it to WM6 (official french ROM from HTC). Seeing it had an AZERTY keyboard, I switched it back to QWERTY using your precious advices. However I'm experiencing problems with a few keys and I wasn't able to find similar cases on XDA Devs and Google. Here are the misfits:
' (opt+z) = File explorer
& (opt+x) = Internet Explorer
Start menu = Nothing happens
Ok (on the keyboard only) = Pops up the Start menu
Tab = Acts as the Ok button
File explorer (opt+left on the keyboard) = Messaging
However every other button (including opt+ok and opt+tab) work just as it should. I tried many locales (french canadian, english us, english uk, english canadian) to no avail and I really need " ' " and "&" characters, please provide help quickly!
Thanks a lot,
Nico
And for those with my problem: keyboard layout tytn french canadian qwerty azerty wm6 upgrade
UPDATE:
Would getting the official ROM in english solve the problem? It seems like there is no documentation on a QWERTY french TyTN?
e: Inserted a question mark, woops. Still in need of an answer
Kinda need a lil' help there, thx!
Not sure, but you can try an official English or you can try a cooked French rom. Schaps has cooked these and you can get information (or ask your questions) on his threads & posts.
Double post, sorry (see below)
galaxys said:
Not sure, but you can try an official English or you can try a cooked French rom. Schaps has cooked these and you can get information (or ask your questions) on his threads & posts.
Click to expand...
Click to collapse
And if I take the official English ROM, would I have to reinstall everything or can I use software to reinstall my stuff on it?
Like I said 'not sure', but I would think so for the english rom.
Yes, you would have to reinstall any additional programs, etc.
Yes, there are back up programs for your device; you can search Wiki for information on them.
Alright I'll try that before messing with my device. Maybe not right now, but I will, thanks!
Alright! Problem solved! I used the official english ROM from HTC. The cause of this problem was problably the fact that only Rogers TyTNs use french ROMs AND a Qwerty keyboard. Snce they got the phone 8 months after the rest of the world, we might not see any french WM6 roms with Qwerty support.
Thanks for your great support!
Posted from my TyTN using Opera, weee!
Congratulations! Glad it worked out for you and your device...

XT9 Language Cabs for Niki

It started with one cab I made for Dutch XT9 on my Dual because I got tired of doing the settings manually after every flash. But now I am planning to make cabs for all the available languages and to make one multilanguage pack with 14 languages in it.
These XT9 cabs will enable the hardware and software Touch keyboard with your language.
Standard keyboard
These cabs will only work with the standard keyboard for the Niki which come with the standard wm6.0 and wm6.1 roms:
1. Czech (please test)
2. Danish
3. Dutch
4. Finnish
5. Norwegian
6. Polish
7. Portuguese (finally, please test)
8. Russian
9. Swedish
10. Greek (for the software keyboard to work switch to greek in the sip settings touch keyboard otherwise it doesn't work)
And I also have a multilanguage pack available in cab or OEM. 12 languages are included the first seven languages plus English, German, French, Italian and Spanish:
- 12 language multilanguage pack CAB
- 12 language multilanguage pack OEM
EzInput 1.5
In the roms of NemanjaLO and d_train the EzInput 1.5 keyboard is included. The cabs from DupinBJK for the languages work but are missing a couple of registry keys to select the language (which were present in his base package) so I've added them to the Dutch cab. If there are people who want me to add it to the other language cabs please ask and I will upload it here.
Please note that I can only edit the files which have the hardware keypad enabled which is stated in the post. See if your language is present here and if it is working with the hardware keypad. All credits go out to DupinBJK off course and all original files for the EzInput 1.5 keyboard can be found here
- Dutch
Nice! thanks
It's quite irritating to manually install the dutch XT9 after each flash.
Hi! Thanks for sharing, I have the same rom installed (clean install 5 minutes ago) and can tell you that this cab is working!!!!!
Thanks allot for sharing!
wmn79 said:
I've made a small cab to enable dutch xt9 on the dual. previously I did all the actions manually so this will spare me some time and I like to share it with you all. I've tested it with my Dual and the new Niki Project v2 hardware keyboard enabled off course. I would really like to know if it does work with other roms as well.
This is what it does:
- It puts the following files in the windows folder: 12.nlhpd.kdb, nlhpd.kdb, NLlsUN_xt9.ldb and spd.5x4.Dutch.kdb
- It add's the following keys to the registry:
Code:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"AvailableLanguages"="0113,0109,010C,0107,0110,010A"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\KdbFiles]
"0B13"="spd.5x4.Dutch.kdb"
"0A13"="12.nlhpd.kdb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyboardIDMapping]
"0113"="0913"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles]
"0113"="NLlsUN_xt9.ldb"
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\KDbFiles]
"0613"="nlhpd.kdb"
[HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
"Library5"=dword:00000005
"LibraryCount"=dword:00000006
Click to expand...
Click to collapse
Can you do the same with danish xt9 for niki????
knudsen81 said:
Can you do the same with danish xt9 for niki????
Click to expand...
Click to collapse
I can give it a try!
wmn79 said:
I can give it a try!
Click to expand...
Click to collapse
Thanks for you time, i have install the cab but know when i press 4 to get h i get the sign from button 7
I thought it was working... Hmmm, well that's probabely because I didn't had the right file for the hardware keyboard.
I downloaded it from I site but I think it's for another phone. The site was in Danish so I couldn't make a lot of it. Do you have an original file for the dual. The files name is: dahpd.kdb. If you have that one I can give it another try.
I'm downloading the Danish rom from netrunners directory and see if I can get the file out of there. I will report back if I have news.
Update: I've extracted the files from the Danish Rom and put them in the cab. I've tested it on my Dual and it seems to work can you check please? The cab in the startpost is updated.
Hello know it works thanks with mary full v2....
Added Finnish XT9 cab please test.
Oh thank you so much!!
Working perfectly.
I'd like to request a swedish version if at all possible.
Norwegian Xt9 for Niki
Hi
Could you please make a cab for Norwegian
Thanks,
Dolled
I will, I am planning to make cabs for all languages. Most of the times the hardest thing is to find the right files and especially the one for the harware keyboard. For norwegian this would be nohpd.kdb. I will have a look for myself see if I can find a Norwegian Rom with the files. But if you can provide it that would be great.
Edit:Will make a swedish also. Found all the files needed in a Danish rom.
Added Swedish, Norwegian and Polish Cab please test.
Thank you!
I just tested the swedish one and it seems pretty good. I had to restart an extra time after I switched to swedish to get it working.
The touch keyboard and keypad don't show the scandinavian letters in the UI (åäö) but I can live with that as the letters work when pressing the correct keys.
Thank you once again!
tunedude said:
The touch keyboard and keypad don't show the scandinavian letters in the UI (åäö) but I can live with that as the letters work when pressing the correct keys.
Click to expand...
Click to collapse
What do you mean with the user interface? Do you mean the onscreen software keyboard? If so that is correct since I didn't do anything with the onscreen keyboard. Otherwise please explain what you mean exactly.
@All: I changed the startpost please post the files I still need if you have them available.
tunedude said:
Thank you!
I just tested the swedish one and it seems pretty good. I had to restart an extra time after I switched to swedish to get it working.
The touch keyboard and keypad don't show the scandinavian letters in the UI (åäö) but I can live with that as the letters work when pressing the correct keys.
Thank you once again!
Click to expand...
Click to collapse
I made a new version of the Danish, Finnish, Norwegian & Swedish cabs with the nordic keymap so now the touch software keyboard comes up with the scandinavian letters.
I used the dutch CAB, but now my keypad acts as an 20-key qwerty keypad in dutch instead of a 12-key keypad. Can you fix an 12-key dutch cab?
Hmm that's strange I also have the 12 (16) key version and didn't had that problem. Which rom are you using?

Keyboard Layout change in cook Rom´s

Hey friends and developers of XDA,
I flashed any english Roms with Hard-SPL and it works great. But I have in any Roms every time the same Problem with the "germany Keyboard Layout". After flashing I change the individuell parameter in the Rom for example
1.) in Seetings/System/RegionalSettings to germany
2.) in Advance Config Tool 3.3.0.0; Input / Keyboard Layout: Germany
in the virtual Keyboard Layout are all Keys in german (ö, ä, ...) but on the Hardwaykeyboard the Keys are in english layout. The Z are on Y, etc.
What is missing in the Rom´s to get a germany hardwarelayout?
THX for help
Thomas
I changed it in the registry.
HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409(English) to 407(German)
fak3z said:
I changed it in the registry.
HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409(English) to 407(German)
Click to expand...
Click to collapse
Hey fak3z,
THX for your fast answer, thats the solution !
Thomas
Hello guys,
this afternoon i flashed WinMo 6.5 from Da_G and noticed that under given registry path 1033 instead of 409 stood.
So I searched a bit the internet and immediately found the right page.
http://www.science.co.il/language/Locale-Codes.asp?s=hexadecimal
In Windows Mobile 6.1 the language ID is saved as a Hexadecimal
But in Windows Mobile 6.5 as Decimal!
So.. back to the post.
German Users should replace 1033 with 1031 (@ 6.5)!
Viele Grüße
In which Folder can i forund the .rgu or .provxml to change it in the cooking folder?
Hi folks,
i also tried to change the hardware keyboard to german, but without any success. I don't know why. I changed the Settings and the parameters in Adv. Config Tool. I am using the EnergyROM Series 2.0 21042!!!
I also changed the value for CurLang from 409 to 407.
Please help me!!!
Thx
skulltor said:
Hi folks,
i also tried to change the hardware keyboard to german, but without any success. I don't know why. I changed the Settings and the parameters in Adv. Config Tool. I am using the EnergyROM Series 2.0 21042!!!
I also changed the value for CurLang from 409 to 407.
Please help me!!!
Thx
Click to expand...
Click to collapse
did you soft reset
Shazad.K said:
did you soft reset
Click to expand...
Click to collapse
Thank you Shazad.K!!! That was the hint i needed
Far out but maybee close to my awnser
Hi guyes i don't have a Rapahel (don't even know the model) but i do have a Samsung i780 and have trying to find a solution to the Q u awnsered here, so my Q to u is.
Does this work with any WM device?
and will it work from english to Swedish (with another code)

Ialian Keyboard

Because no ITA ROM 6.5 for Touch Pro is and will be available, and because the keyborad of the Italian HTC Touch Pro are different from WWE version, is there are any possibility to do work NOT only the normal keys of the keyboard but also all the special keys of the Italian keyboard ?
Because without the roght configuraiton is impossibile to use the kwyboard
Please help me !
Thanks
you have to do this!
...first of all....look around!
then...
open registry editor:
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CurLang
and change from 409 (english layout) to 410 (italian one) (HEX)
then restart your device.
obviously you have to select "Touch Pro" keybord instead then Fuze one from "Keyboard Selector" http://forum.xda-developers.com/showthread.php?t=490290
enjoy!
Tommy
I will try it !
Tbaks a lot
Sorry but I have just tried and doesn't work ...
All the norla keys are good after the change you suggested, but all the others function, like you have to do in combination with FN keys are not right, are not normal Italian Touch Pro Keyboard
Any suggestion or solution ?
Luca
siroftherings said:
Because no ITA ROM 6.5 for Touch Pro is and will be available
Click to expand...
Click to collapse
????
I use Deneb WM6.5, wich is full italian!
siroftherings said:
Sorry but I have just tried and doesn't work ...
All the norla keys are good after the change you suggested, but all the others function, like you have to do in combination with FN keys are not right, are not normal Italian Touch Pro Keyboard
Any suggestion or solution ?
Luca
Click to expand...
Click to collapse
In this tread thereare two usefull .cab:
Maja eng key on ITA rom.cab
Maja ITA key on WWE rom.cab
The first works perfectly on my raph.
http://forum.xda-developers.com/showthread.php?t=425397&page=2
Have fun

Categories

Resources