Need help!!!
Smashed my LCD and orded a replacement from HK. The part number they sent me was 60H00037-00M. After installing it, all I get is a white screen. Sent it back and recieved another one with the same number and again the same deal!!!
The part number Im chasing is 60H00056-00m or TX0704APAA1. I think it is a mfg by Hitachi.
I cant find anything with this part number on the net and was wondering if anyone knows if there is an equivalent that could be used insted.
Mal..
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
teknics said:
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
Click to expand...
Click to collapse
Teknics, are yoy refering to the two incy wincy screws that fasten the ribbon to the d-pad at the bottom?
Mal..
Yes that cable, but also make sure the ribbon cable that slides into the locking connector on the main board is in properly also.
HK?????
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
sllabymkcus said:
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
Click to expand...
Click to collapse
HK refers to Hong Kong you can purchase screens and digitizers that i know of but as far as small inexpinsive electronics i think your sol. just out of curiousity did you manage to blow the speakers or what? i have played some pretty loud music through my hermes using mortplayer and have not managed to blow them yet.
I have 60H00056-00m or TX0704APAA1 LCD.
msn:[email protected]
I am looking for a TX0704APAA1 for my HTC Tytn.
Apparantly this is the Hitachi model other models are also available on ebay (Samsung and Toppoly). As I understand Samsung and Toppoly are not compatible with one another apparently they use different controllers.
As for the Hitachi I have know idea whether it is compatible with Samsung or Toppoly, which is why I am on my quest after the Hitachi...
Anyone know where I can get one?
I think this one might work.
http://cnn.cn/shop/8525tytn-screen-p-1704.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
The 60h00032 or 60h00037 did not work on my dopod 838 pro.. I just got a white screen.
Hello,
first let me say how glad i am that this forum exists.
I´ve got an Wallaby (MDA1) which has an broken LCD Touchscreen. But only the Sensorpad is broken, not the LCD. Is it possible to change the Touchsensor only without the LCD Display? Is the Sensor glued on the LCD diplay or just layed over or pressed by screws?
I would be glad for good news....
Now i know much more.....
the sensorpad can be changed. at Ebay the hole sensorpad is available for 29€. The Pad (Glas with glued foil) is glued on the case of the LCD. Now i have ordered the Sensorpad and i´ll tell you how it´s ended....
LCD Touch screen display
Hi!
I just bought a kind of this touchpad. As you wrote, on ebay is easy to buy a piece. But, there are huge differences between the prices! I ordered this item:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=300146530292&ssPageName=STRK:MEWA:IT&ih=020
On the picture seems the backlight's flex cable, but in the packet is the good part. The touchpad on a pane of glass.
I think, this is the cheapest price on ebay. The packing and shipping was good, the seller is OK!
Successfully changed!
Yesterday I successfully changed a touch screen display on a Wallaby.
I had a device, with broken display. I saw, just the LCD was broken. Touch screen was unscathed. It is not too difficult to disassemble the complete display. The touch screen comes out with the plastic and metal frame.
Why is it interesting? Because I had the typical screen alignment "loop" failure. So, I can say, that this is definitely hardware failure. Exactly, the fail of the touch screen layer!
I´ve changed the Touchpad today. It works but the display doesnt.F**K. So i have to look for a hole new display....
Hey Guys
I finally managed to crack my wizard (dropping it out of everywhere )
The prob is that I cracked only the touchscreen not the LCD.
The touchscreen seems to get the touches but it understands them differently.
For Ex:I push the Time on HTC HOME It opens the soft or left key dependent on where I'm pressing.
I found a touchscreen on e-bay without an LCD for 13 bucks so I ordered it but I wanted to know if anyone else had any luck with same situation
Aldo
Same case yesterday
I also drooped y phone yesterday and I have a crack line running across the screen but the touch screen is working ok for me. I saw the eBay auctions about screen and no lcd but what if the lcd is the part that is broken ?
can we change that too ?
tkdsl said:
I also drooped y phone yesterday and I have a crack line running across the screen but the touch screen is working ok for me. I saw the eBay auctions about screen and no lcd but what if the lcd is the part that is broken ?
can we change that too ?[/QUOTE
I have several times replace LCD in a wizard. It was very difficult for me to replace the touchscreen so i take the complete set. It is not only te replace the touch layer, but you must alse do some soldering.
And if jou replace the screen, the flexcable must be propperly fit. Before i assembley al, i first check if screen en touch are oke.
Click to expand...
Click to collapse
sleurhut said:
tkdsl said:
I also drooped y phone yesterday and I have a crack line running across the screen but the touch screen is working ok for me. I saw the eBay auctions about screen and no lcd but what if the lcd is the part that is broken ?
can we change that too ?[/QUOTE
I have several times replace LCD in a wizard. It was very difficult for me to replace the touchscreen so i take the complete set. It is not only te replace the touch layer, but you must alse do some soldering.
And if jou replace the screen, the flexcable must be propperly fit. Before i assembley al, i first check if screen en touch are oke.
Click to expand...
Click to collapse
would this item work for me them EBAY
I am comfortable opening the phone to fix it, for some reason cannot find the right part,
thank you.
Click to expand...
Click to collapse
tkdsl said:
sleurhut said:
would this item work for me them EBAY
I am comfortable opening the phone to fix it, for some reason cannot find the right part,
thank you.
Click to expand...
Click to collapse
It seems to be. I did it on a wizard and i know the HTC 8125 is the same one with a different housing.
I remember this kind off LCD picture. There is a dissasembly guide but you need a torx 4, plastic openingstools and a very tiny X screwdriver.
I use this kind off opening tool [URL="http://www.mobielbereikbaar.nl/Product.aspx?naam=Nokia+SRT-6+Opening+Tool+Origineel[/URL]
Other
If you want, you can replace display.
Click to expand...
Click to collapse
were would I find the entire display to replace mine with , I only found the LCD on ebay for the about 41 dollars ?
I have the kit for the ipod repair not sure about the Trox 4 I will check today.
tkdsl said:
were would I find the entire display to replace mine with , I only found the LCD on ebay for the about 41 dollars ?
I have the kit for the ipod repair not sure about the Trox 4 I will check today.
Click to expand...
Click to collapse
It is Torx5 i see
But here something from Hong Kong
This is a LCD witch tochscreen.
This is great, I will get that one and that should cover all I have the instructions allready. thank you.
Replacement LCD
you should check WWW.HTCLCD.COM they have it for $39 with the tools and in the usa
Hi
I bought this touchscreen on e-bay from a power seller and It worked.
I can use the touch again in my device.
Rgds
belize2004 said:
you should check WWW.HTCLCD.COM they have it for $39 with the tools and in the usa
Click to expand...
Click to collapse
I got one from them.With instructions and tools!Worked fine.Install was easy
i have succesfully replaced the touch screen on my tmobile mda vario.
check that the ribbon cable is exactly the same as whats on your phone. the first touchscreen i got of ebay the ribbon cable was slightlly different and after assembling it didtn work, after getting another one with same ribbon cable, worked perfectly.
Note that you will have to solder the ribbon cable, a good soldering iron with a very fine tip will make it fairly easy. ribbon cable is very small so soldering can be a tad fidgity.
Ipod Repair
You might want to check out http://www.ipod-repair-guide.com for more information.
No need to buy the lcd seperate from the touchscreen and resistance weld the cables
veda_sticks said:
i have succesfully replaced the touch screen on my tmobile mda vario.
check that the ribbon cable is exactly the same as whats on your phone. the first touchscreen i got of ebay the ribbon cable was slightlly different and after assembling it didtn work, after getting another one with same ribbon cable, worked perfectly.
Note that you will have to solder the ribbon cable, a good soldering iron with a very fine tip will make it fairly easy. ribbon cable is very small so soldering can be a tad fidgity.
Click to expand...
Click to collapse
I'd just go ahead and get the lcd screen with the digitizer. That soldering won't work unlest you can resistance weld the lcd ribbon cable and digitizer cable together and its only about $30 bucks on ebay now for them both together. Then you just get the repair manual, open the phone, swap the screen out and just plug it in and it works.
Is it easy to just change the touchscreen? how to do it?
Hi,
I had the same problem few month ago, and at that time the LCD screen was broken, and I had to change it by myself (with no big problems).
now I have a similar problem but just the touch screen is broken, I see that the price of just the touch screen is much cheaper that the whole LCD screen, but my doubt is:
How can I install just the touchscreen on th LCD,
I heard that you have to solder it.. but how? and is it easy?
is someone of you knows how to do it please post the istructions...
Luca
ohh... sorry, I sow just now that someone already answered to this questions...
I didnt see that there was a second page of the thread
anyone knows hot to replace the Touchscreen ?
if there is a guide or pictures is the best!
thanks
seclimar said:
anyone knows hot to replace the Touchscreen ?
if there is a guide or pictures is the best!
thanks
Click to expand...
Click to collapse
I say if you are asking for instruction or pictures on how to replace a touch screen, you will not be able to do it yourself, it's a specialised techie job. I suggest replacement of the entire unit assembly - LCD+digitizer.
enigma is right.
Changing the digitizer is not an easy job. I recently had a "blind spot" in the middle of the digitizer, and I did not even think about changing it. Instead I obtained a LCD/digitizer unit from *bay for a bit above 20 Euros including postage (from China). Changing the LCD unit was done in 20 minutes all in all, and now my good old Wizard works fine again.
If you decide to buy a complete unit (I would really recommend this!), be shure to buy the right one, there are two types, one with a "gold ribbon", one with a "black ribbon". So, first you have to open your Wizard and look which type you need. Good luck.
htc housing
Hi guys, my trusty old wizard has finally fallen apart. the hain housing is craked even though the lcd and the phone itself is still in top condition. I am looking for a new housing so I can replace the old one and end up with a virtually new phone. Could someone point me to the right place please. I have been trawling the internet these last few days but because they have been out of production for that long, there does not appear to be any places I can get a housing to buy. Your help will be deeply appreciated.
Cheers.
Hi,
I've looked around but I haven't found an answer to this. I have a Qtek S200 G4 with a defective touchscreen. The LCD works fine (luckily). Looking around I found out that there are two replacements for the LCD, one with a golden ribbon, another with a black ribbon. The same goes for touchscreens: on Ebay there are auctions for touchscreens compatible w/ the golden ribbon and different touchscreens compatible with the black ribbon.
Does anyone of you know if the golden/black difference depends on G3/G4 (so maybe all G3s have a golden ribbon and all G4s have a black ribbon) or if it's related to something else?
Thanks!
I opened my G4 Prophet and it's the BLACK version. I don't know if it's the case for every G4 out there, though.
Unluckily, the touchscreen replacement seems defective, so I'm now waiting for a new spare to come from Hong Kong :-(
I've just broked my LCD before 2 day's, I've looked to ebay.de and there are displays for version (60H00032-02M - mine) and other versions (60H00037-01M etc.) but there are Black ribbons too. Will it fit to my one if it will not be the same version, but the one with black ribbon ? thanks for reply ;-)
I am having trouble identifying properly what colour flex cable LCD replacement I need to get. I've opened my SPV M3100 but the flex I see is striped, black and gold! Is there any way to tell definitively. Please help I'm confused and need to buy a new screen ASAP.