only one part of headset works. - Touch Dual, MDA Touch Plus ROM Development

hi,
since i got a new niki, as the old one's touchscreen was broken, i have the problem, that only one speaker of the headset works... the cable doesnt seem to be broken and i can't find anything broken at the headset... so i don't know where to search for the problem now... any hints?
anyway: how to flash a different radio after flashing 1.22 hardspl? whenever i try to flash, it just stays at 0% on the loading screen... i just softresetted after that.... i got no idea how i could try different radios now....

You must CID unlock you device first

Tim4 said:
You must CID unlock you device first
Click to expand...
Click to collapse
the device is cid unlocked by default...
the question is how to flash while running a htc spl...

the_fish said:
the device is cid unlocked by default...
the question is how to flash while running a htc spl...
Click to expand...
Click to collapse
That doesn't really make sense...
how can you run a HTC spl.... but have a CID unlocked device?
have you hard-spl'd?

no i havent hardspled im just running the wm6.1 upgrade with 1.22 spl, and according to netrunners thread, it would stop at 99 percent if it wouldnt be cid unlocked

Related

8525 semi-n00b qestion

i was gonna unlock my 8525 via pof's unlocker and downgrade solution when i read this post http://forum.xda-developers.com/showpost.php?p=1062526&postcount=7 I then figured it wouldnt hurt to just called cingular and see if they would give me the unlock code...i placed a call to cingular's international department and get them to send me the unlock code in less then 12 hours by telling them i was planning to go on a trip out of the country on sunday and what is the soonest i could get the code..i then acted like i didnt know anything about getting a phone unlocked and he recommended that i place international roaming on my phone yada yada yada..... i declined and asked if i would still be able to roam while out of the country.. he said yes... i said thats fine.. but i would also like to have the phone unlocked incase i would like to buy a sim and use it for making local calls in the country that i will be in.. he said sure no problem... he submitted a request and in less then 12 hours i had the unlock code in my mailbox... i hope this helps anyone on cingular trying to unlock there phone with no modding...
now the second part of this thread is relating to the bootloader versions.. now i know that my bootloader is 1.6.. is it necessary for me to still use pof's method in combination with the downgrade in order to supercid unlock my phone in order to flash the rom with different hermes roms even tho' my phones sim is unlocked....is it possible to use pof's file to supercid unlock and then reflash back the same radio with no patch and same cingular rom to have the phone back to fully stock out of the box with the exception of having it be fully unlocked with the sim and sid..... also.. .is the same necessary for flashing the radio with different versions??..from what i understand you can "unhind the ext roms to see them but not activate themm.. and in order to use the features in the extended roms do i need to be supercid unlocked in order to unlock the ext.roms??i have fit4cat tweaker installed already and it makes the changes making me feel like i am accessing the ext.rom features already... and if so when i cid unlock my phone can i just pick and chose the .cabs to install from the different options on the different roms... .. i am not in an area that supports Edge .. but when i am will it display so on my screen with a E? or is that a mod i will need to do as well.. and i also see a feature in fit4cat that enables hsdpa.. i thought my phone would default using the connectin if it was available.. am i wrong.. and the ptt hack that someone on this forum created as a .cabs.. do i need to have it supercid ulocked to use that as well...
im sorry if alot of you have answered these questions time and time again.. i have really tried to answer my own questions for the last 8 hours or so with reading the forums and wiki's.. after a while it becomes a blur...
Ps. when using mtty.exe and i hook it up following exact settings and instructions when it connects it says CLIENTCLIENT then i hit the I to type info and i get CLIENT again.. no prompt.. ??help<< i was not in bootloader mode...oops.. it worked fine after i placed it in bootloader mode
thanks in advance
Abe
honestabe said:
now i know that my bootloader is 1.6.. is it necessary for me to still use pof's method in combination with the downgrade in order to supercid unlock my phone in order to flash the rom with different hermes roms even tho' my phones sim is unlocked....
Click to expand...
Click to collapse
Yes, you need to patch the radio to CID-Unlock. It doesn't matter if the phone is SIM-Locked or not. This needs bootloader 1.04, you can have it by flashing cingular's 1.30 rom.
honestabe said:
is it possible to use pof's file to supercid unlock and then reflash back the same radio with no patch and same cingular rom to have the phone back to fully stock out of the box with the exception of having it be fully unlocked with the sim and sid..... also.. .is the same necessary for flashing the radio with different versions??
Click to expand...
Click to collapse
Yes, it is possible but you need to downgrade your bootloader to 1.04 for this, otherwise you won't be able to flash any radio (patched or not).
honestabe said:
from what i understand you can "unhind the ext roms to see them but not activate themm.. and in order to use the features in the extended roms do i need to be supercid unlocked in order to unlock the ext.roms??i have fit4cat tweaker installed already and it makes the changes making me feel like i am accessing the ext.rom features already... and if so when i cid unlock my phone can i just pick and chose the .cabs to install from the different options on the different roms...
Click to expand...
Click to collapse
You need to have a SuperCID phone in order to UNLOCK the extrom, this means WRITE to it (i.e. delete cab files you don't need and use it as storage space, or put signed cab files from other ExtROM). If your Hermes is not SuperCID you'll be able to unhide it, but will not be able to unlock it.
honestabe said:
i am not in an area that supports Edge .. but when i am will it display so on my screen with a E? or is that a mod i will need to do as well..
Click to expand...
Click to collapse
It will not display "E", and the previous hack used in HTC Wizard for this doesn't work on Hermes. It displays "G" if you are under GPRS or EDGE coverage and "U" or "3G" if you are under UMTS/3G or HSDPA coverage.
honestabe said:
and i also see a feature in fit4cat that enables hsdpa.. i thought my phone would default using the connectin if it was available.. am i wrong..
Click to expand...
Click to collapse
Cingular ROMs have HSDPA enabled by default, you don't need to use that option from fit4cat hermes tweaker (it won't hurt if you do it), but it is there because not all roms have HSDPA enabled by default.
honestabe said:
and the ptt hack that someone on this forum created as a .cabs.. do i need to have it supercid ulocked to use that as well...
Click to expand...
Click to collapse
No, you don't need SuperCID to use this.
honestabe said:
im sorry if alot of you have answered these questions time and time again.. i have really tried to answer my own questions for the last 8 hours or so with reading the forums and wiki's.. after a while it becomes a blur...
Click to expand...
Click to collapse
ALL I answered is in the wiki, but probably explained in a bad way because I am not english native speaker, I would be very glad if you EDIT the wiki and explain it better/clearer than it is, so other people like you can understand it next time they read.
one more question... if i flash back to the cingular rom that is a 1.6 bootloader after i have done this whole process am i still able to flash to whatever i want providing that i have flashed from 1.6 to 1.4 unlocked sim and supercid previously.. basically does this flash the cidlock back on it.. or must i keep the bootloader in 1.4 in order to keep flashing roms
On another note.. i read these forums all night for the first time and i want to tell you Pof that you are the most helpful person i have ever come across on ANY forum board and the xda members are lucky to have you here... also extremely intelligent... thanks
extremely grateful
Abe
The main reason to SuperCID your Hermes is to be able to flash "whatever" rom you like, without having to bother with bootloader versions. If you use SIM & CID unlocker v2a to make your Hermes SuperCID it will be SuperCID forever, so the CID lock will not be back anymore.
Basically, after your device is SuperCID you only need to go back to bootloader 1.04 if you want to be able to flash extracted radio-upgrade only, as this is not possible with other bootloader versions.
is the patch u put in the radio overwritten when i apply a new rom???
the radio file is included in the rom you flash right?
or you can just find the radio file and flash that alone??
does the radio flash require it to be hooked via active synch or dissable
i have gotten Error 120 country id error twice now trying to flash ur radio flash.. any advice?
i should be outa noob questions shortly..
thank you again
if all goes well(im in the process of this whole precedure as i type...30% now) i shall write this in the wiki in n00b language...
honestabe said:
is the patch u put in the radio overwritten when i apply a new rom???
the radio file is included in the rom you flash right?
Click to expand...
Click to collapse
Yes and yes
honestabe said:
or you can just find the radio file and flash that alone??
Click to expand...
Click to collapse
Yes, see wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
honestabe said:
does the radio flash require it to be hooked via active synch or dissable
Click to expand...
Click to collapse
It doesn't really matter, as the RUU will kill activesync anyway, but I always recommend to disable activesync and start the update from bootloader mode (tri-color screen).
honestabe said:
i have gotten Error 120 country id error twice now trying to flash ur radio flash.. any advice?
Click to expand...
Click to collapse
Follow all the instructions, read and read
honestabe said:
if all goes well(im in the process of this whole precedure as i type...30% now) i shall write this in the wiki in n00b language...
Click to expand...
Click to collapse
Thanks, that would be great!
And good luck with the flashing
presto everything is working fine all done..
when it gave me the error i just closed the flash and restarted it...(just like what it said to do in the "if your having problems flashing post"
ran ur unlocker supercid program.. and voila
anyway.. ill write up somethin real user friendly..
thanks again Pof
-abe
Hey abe,
thanks for the tip on getting my phone unlocked...It worked like a charm.

1.09 to 1.04

Just got a X01HT after Dec, version is 1.09. After reading all these threads, is it possible to use "DownGrade_SPL.rar" downgrade to 1.04 as I know sim unlock is still not available yet, just want to use chinese rom instead..........
Thks,
hi there,
please reaqd the wiki and the sticky threads on this board, the solutions ar eposted there.
cheers,
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
mj13 said:
i need to make it super CID before that??
Click to expand...
Click to collapse
yes, you are right.
riderhk said:
I have the same case as yours. I tried to flash the rom to HK version but failed, so I installed cestar instead
Click to expand...
Click to collapse
Just tried flash it to HK rom and it worked....
mj13 said:
Just tried flash it to HK rom and it worked....
Click to expand...
Click to collapse
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
wiccawaiwai said:
How can you make it? I have downgraded to 1.04. But can not flash the ROM
(Cause the CID. How can you make the CID??)
Click to expand...
Click to collapse
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
qtotter said:
1.04 has a bug. even if you get an error message when you try to burn a rom from another company, do nothing with your device and run the same update again on your pc. you can update the rom this time.
Click to expand...
Click to collapse
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
riderhk said:
My system hangs when I run the flash program second time, so my x01ht is still in Japanese version
Click to expand...
Click to collapse
is your bootloader 1.04?
mj13 said:
Thks, just tried and it successfully downgrade to 1.04......so now I can flash the chinese rom or i need to make it super CID before that??
Click to expand...
Click to collapse
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Thank you vey much.
qvik123 said:
Hello mj13,I looked around the posts and I could not find any solutions to downgrade my X01HT shipped after Dec from 1.09 to 1.04.Would you please tell me where did you find it or how to finish it?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
qvik123 said:
And ,since downgraded to 1.04 ,does that mean I can unlock my X01HTto use another SIM card using the v2a version unlocker?
Click to expand...
Click to collapse
If its pre December 2006 yes, if it's post December 2006 no.
qtotter said:
is your bootloader 1.04?
Click to expand...
Click to collapse
yes, already downgraded to 1.04.
Would you mind try to upgrade the rom again? If it doesn't work, please let us know
Hi,pof!Thank you very much for answering my question on the 1.09 to 1.04 topic.But I still got some questions.In the link you gave me it says I can not downgrade my bootloader unless I go to the IMEI something website and pay some dollars.Is that the only way to downgrade my bootloader?
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Sorry to bother you.Hava a good day!
Sorry to post it again after giving you a private message.
qvik123 said:
Is that the only way to downgrade my bootloader?
Click to expand...
Click to collapse
Legally yes, as you have SPL-1.09 now.
qvik123 said:
And you told me even if I downgraded my bootloader,I still can not unlock my phone.That means,if I downgraded,I can burn other language rom (like English)but I can not use other company's SIM card.Am I right?
Click to expand...
Click to collapse
Yes, because softbank 1.14 radio doesn't allow to be upgraded even if you flash another ROM this radio will be kept in your device.
Ok so I have a little problem with the whole 1.09 -> 1.04 thing.
I have been searching for a couple days or so and gathering some information about it, but I don't think that anyone has had my problem yet. I have a pre-Dec. x01ht, and I stupidly upgraded to 1.09 (don't ask why; I'm still kicking myself). So after trying to downgrade with a couple different versions of the 1.04 provided here with no avail, I found the downgrade_spl file that has been floating around. Each time I keep getting the same problems.
When I active sync with my computer and start the downgrade (upgrade?) process i get past the first preliminary check with the phone and when it jumps to the second check, the phone resets into the tri-color screen for about half a second, and then a white upgrade looking screen. after that the phone checks itself and everything says "ok", but it never resyncs with the computer. The computer stays on the screen that would show a progress bar, but after it hangs there it gets an error screen. i also tried doing everything from the boot mode (the tri-color menu), and that also gets an error. when i try from the boot mode, the both of the progress bars start, but before either go anywhere they both the computer screen comes up with an error in the program. it asks me if i want to recover or view the file, and recover also doesnt work.
Has anyone else had this problem, and if so how did you go about solving this dillema?

How can i know my CID?

Any ideas? I tried searching the forum already but i can't get a it?
Start in bootloader mode, download mtty.exe and start it, connect via USB.
Then type "info 2" - without the quotes.
All info here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
HmmmI`ve got this message:
HTCS11111111ĐŻ©îHTCEUSB
so it is locked or unlocked?..I have the SPL-1.04 and the Orange rom but have managed to installed the 1.27.00 radio rom withouth problems...but now I want to update the ROM with the SA one...
Regards,
Primoz
p.s. In the case it is not unlocked could I use the poh unlocker again?
Pc78 said:
HmmmI`ve got this message:
HTCS11111111ĐŻ©îHTCEUSB
Click to expand...
Click to collapse
This is a SuperCID, your Hermes is completely unlocked
hmmm.....
I have message HTCSuperCid..... is this ok? Only problem is that i'm stuck on 1.18 radio and i can't upgrade to any other version... When i want to upgrade i have error message but not after 10+ minutes, i've got it after minute or two
Bootloader is 1.09
please help
pof said:
This is a SuperCID, your Hermes is completely unlocked
Click to expand...
Click to collapse
Thx pof!...I was just on the way to write you a PM but you were quicker
Regards,
Primoz
franula said:
hmmm.....
I have message HTCSuperCid..... is this ok?
Click to expand...
Click to collapse
Yes this is OK too.
franula said:
Only problem is that i'm stuck on 1.18 radio and i can't upgrade to any other version... When i want to upgrade i have error message but not after 10+ minutes, i've got it after minute or two
Bootloader is 1.09
Click to expand...
Click to collapse
Read: http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
BTW, you will be able to use shipped 1.27 radio.
so when we get a message from info 2 that has HTCSuperCID in it then were safe to do whatever right?
@pof
I tried to upgrade to 1.27 radio and i have same problem
madmattco said:
so when we get a message from info 2 that has HTCSuperCID in it then were safe to do whatever right?
Click to expand...
Click to collapse
Yes, once it is SuperCID you are able to flash any shipped ROM in NBH format.
franula said:
I tried to upgrade to 1.27 radio and i have same problem
Click to expand...
Click to collapse
please READ: to flash an exctracted radio you need bootloader 1.04, your bootloader is 1.09. The radio 1.27 is offered in two different formats: shipped (NBH) file which you will be able to flash and extracted (NBF) file which you will not be able to flash unless you downgrade your bootloader to 1.04.
@pof (hi again LOL!)
From what ive read (see my sig am on 1.09) i cant use these upgraded radio ROMs, but if im not really having any unwanted issues is it even worth trying to downgrade to 1.04??
More to the point (im most probably wrong but...) to downgrade to 1.04 i must flash a different ROM, im happy with the HTC south Africa one?!?
mrvanx said:
From what ive read (see my sig am on 1.09) i cant use these upgraded radio ROMs, but if im not really having any unwanted issues is it even worth trying to downgrade to 1.04??
Click to expand...
Click to collapse
If you are happy with the 1.18 radio, and don't need to access the radio bootloader or AT command interpreter, you can keep 1.09 bootloader without problems. There's no difference in day-to-day use of the Hermes as a PDA/mobile.
mrvanx said:
More to the point (im most probably wrong but...) to downgrade to 1.04 i must flash a different ROM, im happy with the HTC south Africa one?!?
Click to expand...
Click to collapse
That's a way, but as I see in your signature your device is SuperCID, so to downgrade the bootloader you don't actually need to flash a full rom. The steps would be:
1. Flash bootloader 1.01 MFG
2. Flash SPL-1.04 from bootloader using 'lnb' if you don't want to keep the MFG.
You can do this without having to hard reset your device.
pof said:
If you are happy with the 1.18 radio, and don't need to access the radio bootloader or AT command interpreter, you can keep 1.09 bootloader without problems. There's no difference in day-to-day use of the Hermes as a PDA/mobile.
That's a way, but as I see in your signature your device is SuperCID, so to downgrade the bootloader you don't actually need to flash a full rom. The steps would be:
1. Flash bootloader 1.01 MFG
2. Flash SPL-1.04 from bootloader using 'lnb' if you don't want to keep the MFG.
You can do this without having to hard reset your device.
Click to expand...
Click to collapse
Sweet! Would it be a good idea to stick with 1.01 MFG if im planning on pursuing the GPS thing (IF we get past any risky stuff!), or even if i want to use some cooked goodies later on?
@mrvanx: Yes, it's the best one for playing with this kind of stuff
Please help Pof
pof said:
This is a SuperCID, your Hermes is completely unlocked
Click to expand...
Click to collapse
I am trying to establish the CID status for my TyTN.
I get the following code: HTCSQTEK_001ÖUSB>
I cannot see a thread where I can decypher it.
What is my CID status?
I am on bootloader 1.09 that came with the SA ROM.
Would like to upgrade the radio to 1.27
Thanks
basilrsa said:
I am trying to establish the CID status for my TyTN.
I get the following code: HTCSQTEK_001ÖUSB>
I cannot see a thread where I can decypher it.
What is my CID status?
I am on bootloader 1.09 that came with the SA ROM.
Would like to upgrade the radio to 1.27
Thanks
Click to expand...
Click to collapse
Your CID is the part just after "HTCS"
So in your case you get (from info 2) "HTCSQTEK_001ÖUSB" so your hermes is an English HTC branded device, your device is not SuperCID yet.
Check this post to see which it is (im only going by memory)
EDIT: I upgraded to the 1.27.00.00 radio yesterday, aslong as you use the signed released version (the first option on the related thread) you should be ok, dont use the extracted one. You MUST be SuperCID to upgrade the Radio (covering ones ass).
@basilrsa: Your CID is QTEK_001. Your device is CID locked with bootloader 1.09, you won't be able to flash 1.27 radio unless you downgrade your SPL to 1.04 first, either to continue CID locked and be able to flash extracted radio or to CID unlock and be able to flash shipped radio.
Thanks Pof
pof said:
@basilrsa: Your CID is QTEK_001. Your device is CID locked with bootloader 1.09, you won't be able to flash 1.27 radio unless you downgrade your SPL to 1.04 first, either to continue CID locked and be able to flash extracted radio or to CID unlock and be able to flash shipped radio.
Click to expand...
Click to collapse
Thanks for your info Pof, but how can I down grade to SPL 1.04
Sorry for the stupid question but all this is still new to me.
I will really appreciate it.
Thanks
basilrsa: read here:
http://forum.xda-developers.com/showthread.php?t=291827&p=1122696
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
Hi,
I'm getting the following string:
HTCSQTEK_H10é8Ã3HTCEUSB>
but I don't know how to decode it... Is this a super CID or not?
Thanks in advance!
Mogg

Help:Upgrade the HTC 7500,the CID is not correct,info is 294( INVALID VENDER ID)??

From HTC 7500 (de) to U1000(CHT), use rom is U1000ROMcode_DOPODTW_070320.exe.
the device will always boot in three-color mode
cwmaster said:
From HTC 7500 (de) to U1000(CHT), use rom is U1000ROMcode_DOPODTW_070320.exe.
the device will always boot in three-color mode
Click to expand...
Click to collapse
why can't you read the post before you flash the device, it won't work, and you risk yourself of brinking your device. Solutions is on the forum, use the search....
hello sir, I look with "Athena goes wiki ", but not info for that, could you help me to find or tell me how we can do? thanks.
cwmaster said:
From HTC 7500 (de) to U1000(CHT), use rom is U1000ROMcode_DOPODTW_070320.exe.
the device will always boot in three-color mode
Click to expand...
Click to collapse
Remove the miniSD card! I had the same problem
now I get CID back, but how to change the CID to Super CID? If not, the rom doesn't be upgraded.
RUU_Athena_HTC_WWE_1.25.405.2_1.38.00
I tried to update my dutch T-Mobile Ameo with the rom RUU_Athena_HTC_WWE_1.25.405.2_1.38.00 and got at first the connection problem on the device, and after I removed the SD Card the same error 294: Invalid Vendor ID.
this problem is HTC 7500's CID not super CID, so if want to upgrade, we must have the tools to unblock the CID.
cwmaster said:
this problem is HTC 7500's CID not super CID, so if want to upgrade, we must have the tools to unblock the CID.
Click to expand...
Click to collapse
and if you have read though the forum, then you know there is no tools to make your device super CID, there is no tool to unblock it. you must return to original ROM.
wu5262 is correct. There is currently no way of making the Athena superCID. No one, to our knowledge, has posted the utility yet. Careful guys with trying to upgrade. You might brick your phone and have an expensive paper weight if you're not careful. Not all files/posts are from reliable sources, etc. Not saying the poster is not reliable but sometimes there is not enough information for everyone's use.
ltxda said:
wu5262 is correct. There is currently no way of making the Athena superCID. No one, to our knowledge, has posted the utility yet. Careful guys with trying to upgrade. You might brick your phone and have an expensive paper weight if you're not careful. Not all files/posts are from reliable sources, etc. Not saying the poster is not reliable but sometimes there is not enough information for everyone's use.
Click to expand...
Click to collapse
Yeah..totally agreed..i have tried with various roms and unlocking software availabe but none is usefull..
so for conclusion..at this time do not risk yourself to flash with other rom as it will brick your phone...
cheers...
agree with you, ant thanks, I will wati for the unlock
unlocking Athena
ahmadfarid said:
Yeah..totally agreed..i have tried with various roms and unlocking software availabe but none is usefull..
so for conclusion..at this time do not risk yourself to flash with other rom as it will brick your phone...
cheers...
Click to expand...
Click to collapse
Have you tried olipro cid unlock? Since I unlocked my Athena with this software I haven´t had any trouble when instaling roms that showed "unvalid vendor id" before each time tried of upgading wm6 from developer's to the wm6 recently offered from HTC Asia.
famsanr said:
Have you tried olipro cid unlock? Since I unlocked my Athena with this software I haven´t had any trouble when instaling roms that showed "unvalid vendor id" before each time tried of upgading wm6 from developer's to the wm6 recently offered from HTC Asia.
Click to expand...
Click to collapse
Old message...check the post date.
I found the way!
Get the Hard-SPL and install it... ANd Voilâ!!!! Ur last OS again...
get it
http://forum.xda-developers.com/showthread.php?t=296722

Newbie + Vario 2 + a crash during wm6 update = bad

Ok, I give up. I've been searching all night and I cannot find an answer - all the answers that I have found seem to have driven me and my device further to a state that is unrecoverable.
First I couldnt update the rom at all because it crashed mid way, then I finally did get an OS up and running, yet with no radio - no imei or phone functions. I couldnt update radio rom, and I couldnt revert to the original. I now have just a boot loader, that I cannot install anything on to, at all.
"
HERM300
IPL-1.01
HERM300 MFG
SPL-1.01"
I know I'm running the wrong boot loader now, but it was in effort of persuing being able to update the radio rom. I'm following the instructions to change it and at "task 32" Im getting "FF"
Please. Someone help. I cannot be accused of searching first hand as I've been sat here since 7pm trying to sort this, its now 3:44.
Cheers.
you didnt change to hardspl boot loader before u tried to update it?
mien916 said:
you didnt change to hardspl boot loader before u tried to update it?
Click to expand...
Click to collapse
man, OP, please tell us you did...
have you tried reading here?
and here?
yes. and yes. Thanks for the quick replies - looks like im still up with it.
Bad times.. " you didnt change to hardspl boot loader before u tried to update it?" - this I dont understand. I've been following my nose all night. I've updated roms before, but i've never had any issues, certainly not like this.
Good times.. I've got it to boot. and I'm running WM6 "Pro Black" on the thing as we speak. so its not that dead..
I still have no radio version, nor imei, and spl/ipl is still 1.01. I'm trying to update radio rom, but it hangs at 0%.
i take it youve ruled out a bad usb connection? have you considered trying the SD CARD method of upgrading your rom?
thats all but ruled out, as i havent got an sd reader attached.
im making some headway, got the SPL at 1.10.Oli - still cant install radio rom though!
interesting. the shipped tmobile rom is now working...
I say working, its getting up to 13%. which is more than the 0 i was getting earlier.
Ok. So we're up to normal bootloader
IPL 1.04
SPL 2.10
No radio rom will install though. at all. error 262.
I have the same probleem with my t mobile vario 2. I can only upgrade OS ONLY rom, when I try to flash radio it freeze 0% error 262. I've tried evrything from wiki but nothing has worked jet. I hoop sameone can help us.. thanks
jacky651 said:
I have the same probleem with my t mobile vario 2. I can only upgrade OS ONLY rom, when I try to flash radio it freeze 0% error 262. I've tried evrything from wiki but nothing has worked jet. I hoop sameone can help us.. thanks
Click to expand...
Click to collapse
have you considered SIM/CID unlocking your phone? just a thought. not a definite solution. proceed with the latter (CID) AT YOUR RISK as ive heard changing CID to SUPER CID will make your device SUPER CID for eternity (?) and may void any warranty that you have..
bapski said:
have you considered SIM/CID unlocking your phone? just a thought. not a definite solution. proceed with the latter (CID) AT YOUR RISK as ive heard changing CID to SUPER CID will make your device SUPER CID for eternity (?) and may void any warranty that you have..
Click to expand...
Click to collapse
i 've unlock my phone couple month ago. it super CID i checked with 'mtty' info 2. i can flash everything except radio

Categories

Resources