Australian Network Original ROMS - Updated 3 Jan 09 - Touch Pro, Fuze ROM Development

Hi to all budding cooks!
I have links here - thanks to HTC e-Club Australia - for those who wish to download the original signed ROMS for three of the four Australian mobile network providers: Optus, Vodafone and 3 Mobile. Unfortunately the folks at HTC haven't seen fit to publicly release a Telstra-specific ROM for the Next-G network, or else I'd have a link here for that too.
The ROMs available from the links below include the radio in the package, and will install it along with the network-specific stuff for each provider.
Click on the link to start your direct-to-PC download:
Hutchison Telecoms - 3 Mobile (this is the latest one, released on December 4, 2008)
Optus and Vodafone Networks (this is the same one HTC released on October 27, 2008 - no other update for Optus/Vodafone available as of January 3, 2009)
Links also added to the Raphael Wiki Page
Hope these can be of help to someone.....

---

Thanks for these. Have you tested any of them

---

Optus / Vodafone ROM
OK I have flash to this rom and so far so good.
It's a fully unbranded rom. Not even the program shortcuts in touchflow have been inserted.
This upgrade has fixed a main problem of mms for me where I can now send and receive mms again. I could not do this with.405 WWE rom. Radio is the the stock radio and I have had not improvment here in AUS and will upgrade to .28 or .32 shortly.
No speed diffrence and you will need to redo your confiqs again or restore from backup

---

aussieak said:
Thanks for these. Have you tested any of them
Click to expand...
Click to collapse
Only the 3 Mobile and Optus ones, and both work well. Haven't tried the Telstra ones, 'cos I hate Telstra and everything they stand for. My only dislikes are the telco's brandings everywhere on the 3 Mobile ROM, other than that they run exactly like the stock HTC ROM.
As for the radio I'm using with Optus, it's 1.02.25.32, and here in Newcastle it's clear as crystal. Send/receive MMS is fine, and SMS goes on GSM like it always has with Optus.

---

djshotty said:
Only the 3 Mobile and Optus ones, and both work well. Haven't tried the Telstra ones, 'cos I hate Telstra and everything they stand for. My only dislikes are the telco's brandings everywhere on the 3 Mobile ROM, other than that they run exactly like the stock HTC ROM.
As for the radio I'm using with Optus, it's 1.02.25.32, and here in Newcastle it's clear as crystal. Send/receive MMS is fine, and SMS goes on GSM like it always has with Optus.
Click to expand...
Click to collapse
Great thanks. Yes I am using the Optus one as well and still on orignal radio and so far so good, only had issue restoring the backups would not reinstall the programs and settings which is a bit of a pain But the Rom feels faster after the settings applied then the orignal I had. I don't know why I could not get mms to work on orignal rom .405 I had all the correct settings and it would never send now it's like perfect again.
Will upgrade radio next as .19 always has some lagg in connecting to the network

---

The file name of Telstra rom seems like Diamond... I don't think Diamond and Raphael shares the same rom right?

---

katsuya82 said:
The file name of Telstra rom seems like Diamond... I don't think Diamond and Raphael shares the same rom right?
Click to expand...
Click to collapse
It is for the Touch Diamond, yes, you're right. Apologies, and all references to it are now removed.

---

any ideas if this rom works on a vodafone uk device?

---

robnewton1 said:
any ideas if this rom works on a vodafone uk device?
Click to expand...
Click to collapse
Not sure, mate. Seeming though I live in Australia, I haven't been able to set up my computer somewhere in the UK and get my hands on a Vodafone UK edition Raph to test it. Maybe you could test it yourself, see how it goes, and post your results here.
There's nothing to worry about. Only one of four things could happen, and all of them are reversible.
(1) The flash is a failure: you brick the phone. Elsewhere in this forum are threads committed to helping those with bricked phones;
(2) The flash is a success, but you don't like the look, feel and speed of the ROM post-install;
(3) The flash is a success, but the Radio/modem isn't working well for you on your particular network, or
(4) The flash is a success and the whole thing works to your satisfaction.
Trial and error is the key to advancement. You will get nowhere if you don't try, and you always have here a number of others with the same device, to help you out of a bind if you get stuck. Great minds think alike, and as Dr. Conrad Zimsky said in 'The Core', "That's all science is, is best guess..."

---

cheers mate, my only worry is bricking. im new to winmo so all the flashin is new to me.

---

robnewton1 said:
cheers mate, my only worry is bricking. im new to winmo so all the flashin is new to me.
Click to expand...
Click to collapse
I suggest first and foremost you go to the Raphael Elite Team Thread and grab the HardSPL from there. For further instructions on how not to brick your phone, check out this thread. If you haven't already, install ActiveSync 4.5 for Windows XP, or Mobile Device Center 6.1 for Vista. Make sure you download and install the correct version for your operating system, as there are 32- and 64-bit variants.
Connect your phone to your PC through whatever Sync application you installed, then Flash your phone with the HardSPL first. Trust me, I've done it myself and it works, as long as you follow the instructions the boys have left in a text file included in the *.zip's you'll grab from that thread. After that, it's all smooth sailing. Installation of ROM's from wherever you decide to grab them is a risk each time you do it, but make sure that if the ROM's chef has specified a certain Radio to use with what he's cooked, that you Flash that to your device first then hard-reset, then Flash the ROM.
Hope this has helped a little bit.....

---

hmmm i think i must be missing something. ive flashed hardspl no problem but i get an invalid vendor error when i try to flash the voda rom, i thought hardspl stopped that? maybe im just a noob missing something

---

robnewton1 said:
hmmm i think i must be missing something. ive flashed hardspl no problem but i get an invalid vendor error, i thought hardspl stopped that? maybe im just a noob missing something
Click to expand...
Click to collapse
Try going back to the original SPL that you can grab from the same place you got the unsigned from. Then try flashing with the Vodafone/Optus one I've posted links to @top of thread.

---

same error. everything back to stock & nothings bricked so no biggy. i wanted the radios more than anything because i get pretty sucky reception at home but vodafone say i shudnt. oh well, no harm done a least.
Thanks for your help.

---

Can anyone verify if the optus rom gives access to the WCMDA 900 band that we know the device is capable of? Cheers

---

Mrjasjam said:
Can anyone verify if the optus rom gives access to the WCMDA 900 band that we know the device is capable of? Cheers
Click to expand...
Click to collapse
As far as I am aware, the device flicks between whatever frequency is available. That is, if the 900MHz band is there, then it uses it, but when the 2100MHz band is around, it'll switch to that one. I was happy with that stock Optus ROM in my Raph, using my Optus SIM card, but have gone back to the T.I.R. (PDM) one simply 'cos I like it.
My Raph is an original outright device bought from 3 Mobile - with the 3 generic ROM installed - but because I jumped from a stock Vodafone service to Optus ('cos Vodafone here in Newcastle are not providing 3G/HSDPA) I chose a ROM I liked the look of.

---

djshotty said:
As far as I am aware, the device flicks between whatever frequency is available. That is, if the 900MHz band is there, then it uses it, but when the 2100MHz band is around, it'll switch to that one. I was happy with that stock Optus ROM in my Raph, using my Optus SIM card, but have gone back to the T.I.R. (PDM) one simply 'cos I like it.
My Raph is an original outright device bought from 3 Mobile - with the 3 generic ROM installed - but because I jumped from a stock Vodafone service to Optus ('cos Vodafone here in Newcastle are not providing 3G/HSDPA) I chose a ROM I liked the look of.
Click to expand...
Click to collapse
Hi there do you get the UMTS 900 band option in the band tab? My 3 rom only gives me 2100, 800, 850 options in UMTS and the usual GSM frequencies.

---

Mrjasjam said:
Hi there do you get the UMTS 900 band option in the band tab? My 3 rom only gives me 2100, 800, 850 options in UMTS and the usual GSM frequencies.
Click to expand...
Click to collapse
I just check out the Optus /Vodafone ROM and the the GSM/UTMS band options have dropped down to 2 options
Auto
UTMS (900+2100)+GSM(900+1800)
Netwrok type is
Auto
GSM
WCDMA
My settings are auto auto and get HSPDA all day in Canberra

---

aussieak said:
I just check out the Optus /Vodafone ROM and the the GSM/UTMS band options have dropped down to 2 options
Auto
UTMS (900+2100)+GSM(900+1800)
Netwrok type is
Auto
GSM
WCDMA
My settings are auto auto and get HSPDA all day in Canberra
Click to expand...
Click to collapse
Perfect! Thanks very much for the info.

---

Hi, this is an interesting discussion about band freq's here...
I'm running 1.02.25.19 with ROMeOS 1.21 WWE and I see the following options:
Auto
GSM(900+1800)+UMTS(2100)
GSM(1900+850)+UMTS(1900+850)
UMTS(2100+800)
I'm with Vodafone. I do not experience any call quality issues, slow call connection or internet speed issues... so I'm not too sure if this changes anything considering Vodafone mainly uses 1800 and they're still in the process of running out 900MHz.
FWIW... I tried running Radio 1.02.25.28 but I did experience issues with my camera, which is why I'm back on .19