Hello all,
current version is 1.4.1 beta
my own attempt to add the missing "missed call" and "missed sms" reminder to WM 6, WM 6.1 and WM 6.5
the idea here was to keep it simple. the program can vibrate and or generate a chosen sound at a set interval, to notify the user that there are missed calls or unread sms messages. it will wakeup the device if needed to give the notification.
Note: The program has been created and tested on PocketPC phones only. This program might or might not work correctly on Smartphones.
to use:
install the cab on the device or the storage card.
launch the application and set your preferences.
click apply, the program will minimize. it is neccessary to keep the program running to have it generate new reminders, but it only uses the cpu when needed it does not poll every minute or so to see if a notification came in.
hope that someone will find this usefull
The program currently offers the following:
missed notification for missed call/ sms / mms and e-mail
No reminder when call is in progress
Option to set sound per reminder type (the sounds will,if needed, be generated all at once for the moment, this could be changed in the future)
option to "minimize to taskbar" or "minimize and hide"
Lock screen on phone call connect (I am using this myself and decided to keep it in. it locks the screen using the windows lock when a phonecall is connected. it unlocks the screen when a phonecall is finished. Default this is off, and you do not have to use it if you do not want to.)
Option to set vibrate time in seconds
LED vibrate number can be chosen from 0 till 20
Option to not wakeup the device
Option to not give reminder in set timespan (if you specify from 2300 till 0700, it means that the program will not generate a reminder between 2300 and 0700 each day)
About box
Should display in QVGA/VGA/WQVGA/WVGA
The program uses almost no cpu time, only when it is needed
one "advanced user" registry key in HKEY_CURRENT_USER/Software/MissedCallReminder:
debug: Default is "False", if set to "True", the program will generate debug information in a logfile. to help me indentify problems.
NOTE: apparently Omnia devices use the sms count for both SMS and MMS, that means that the program should generate a MMS reminder if SMS reminder is selected. I would like to hear from Omnia users if this is true.
1.4.1 beta release
bugfix: Reminders are given for a notification even if the notification is not selected in the notifications tab. (second attempt )
bugfix: If no reminder between is used the program does not correctly follow the time rule
bugfix: program still vibrates the phone if phone sound is set to silent
TODO (Things that will be in a next version):
Multi language support
WISHLIST (Things that might be in a next version, if i have the time and can make it work)
Option to stop generating a reminder after x minutes
option to stop generating a reminder after x times
KNOWN BUGs (things that,if possible, be fixed in a next version)
A small FAQ
Q: what does Vibrate LED number mean?
A: The LED number specified here is used to vibrate the device. This is different per device. Using the "Menu - Test vibrate" you can test if the number entered in the vibrate LED number field is the correct one for vibrating the device.
Q: what does the menu option "No icon in taskbar mean?
A: the option "Menu - No icon in taskbar" controls the "minimize to taskbar" or "minimize and hide".
When "No icon in taskbar" is NOT selected the program will minimize to the taskbar. the program can only be reopened using the icon in the taskbar. it is not visible in the taskmanager.
When "No icon in taskbar" is selected the program will only minimize. it can be reopened by relaunching the program. it is also visible in the taskmanager.
TouchFlo user should select the "No icon in taskbar". when doing this please close the program and relaunch it for the setting to take effect.
Q: What does "Lock screen on call connect" mean?
A: it locks the screen using the windows lock when a phonecall is connected. it unlocks the screen when a phonecall is finished. Default this is off, and you do not have to use it if you do not want to.
Q: I cannot relaunch the program when it is already running using the program icon.
A: please see post # 2:
If you like my work, feel free to give a small donation ( EUR or USD )
Further explanation for the program does not start from program icon
I'll try to explain with some pictures how the program behaves when the no icon in taskbar option is selected or not selected. Just to be sure that it is not the cause for users who are experiencing problems with reopening the program using the program icon:
first situation:
You have installed MissedCallReminder and you start it for the first time, If you change nothing and select Apply the following will now happen:
Menu - no icon in taskbar is NOT selected (noiconintaskbar.jpg)
The program is not visible in any Taskmanager's application list
The MissedCallReminder icon is visible in the taskbar (Iconintaskbarnotselected.jpg)
When this is happening the program will not react to clicks on the program icon in the programs list, it can only be reopened using the taskbar icon.
second situation
You have installed MissedCallReminder and you start it for the first time, you select Menu - no icon in taskbar AND completely exit the application using Menu - Exit. You then restart the program and select Apply and the following will now happen:
Menu - no icon in taskbar is selected (Iconintaskbarselected.jpg)
The program is visible in any Taskmanager's application list (visibleintaskmanager.jpg)
The MissedCallReminder icon is NOT visible in the taskbar
When this is happening the program will react to clicks on the program icon in the programs list.
Request: If users experience this and are certain the above situation is not the case then i would be very interested in what the program registry settings are. if you are able to do this could those users please open a registry editor and navigate to HKEY_CURRENT_USER\Software\MyMissedCallReminder and tell me the value of the key "minimizetotaskbar"
cool.. i'll be using it
FootPrint?
What kind of a footprint or memory usage does it require?
curious george said:
What kind of a footprint or memory usage does it require?
Click to expand...
Click to collapse
memory usage is currently around 235 kb
Looks neat
Throwing in an idea, hope it's ok. It would be good if you could have reminders for only missed calls and not messages (or the other way around for that matter - looks like you will get the same reminders from both on the screenshots).
I'm biking a lot and don't always won't to stop to read a new message, hence reminders can be a bit annoying. On the other hand, I'm wearing my headset so I always pick up calls
MTM said:
Looks neat
Throwing in an idea, hope it's ok. It would be good if you could have reminders for only missed calls and not messages (or the other way around for that matter - looks like you will get the same reminders from both on the screenshots).
I'm biking a lot and don't always won't to stop to read a new message, hence reminders can be a bit annoying. On the other hand, I'm wearing my headset so I always pick up calls
Click to expand...
Click to collapse
i am currently working on some "improvements" like having it minimize to the taskbar. i think i will also include the option to turn a reminder on or off for unread SMS or missed call
OMG thx man very much,i was looking for a prog. like this for a while now,thx again great post
Good Job, it works on my KS20
I like it, it is simple
No Vibrating
No vibrating on ASUS P535!
How do you HTC people cope with the reminder witch turns on the screen. In your pocket, an unwanted touch on the screen could run an application?
The Asus P535 has an HOLD button!
Too bad the button apply can't be reached with a 240x320 (landscape) display like the one used on the IPAQ 914C
sudist said:
No vibrating on ASUS P535!
How do you HTC people cope with the reminder witch turns on the screen. In your pocket, an unwanted touch on the screen could run an application?
The Asus P535 has an HOLD button!
Click to expand...
Click to collapse
when applying the settings you can also specify the LED number to vibrate (default is 1) . please try this. perhaps it will be usefull to have a test option.
regarding the unwanted touch problem, i personally use S2U2, so when the device wakes up i do not have this problem.
what i can do is add an option that the device does not wakeup when a reminder is given. but that does mean that you will not hear any reminder until the device wakes up.
tesselaar said:
Too bad the button apply can't be reached with a 240x320 (landscape) display like the one used on the IPAQ 914C
Click to expand...
Click to collapse
the next version will hopefully have better support for non portrait display.
mb286 said:
when applying the settings you can also specify the LED number to vibrate (default is 1) . please try this. perhaps it will be usefull to have a test option.
Click to expand...
Click to collapse
I've tested on 1 and 10 (seconds I think)
mb286 said:
what i can do is add an option that the device does not wakeup when a reminder is given. but that does mean that you will not hear any reminder until the device wakes up.
Click to expand...
Click to collapse
There are programs that still work in SLEEP MODE (for example, autoflight is always telling me the time....even in sleep mode).
*Memory heap size = 1Mb (OsRemindMe = 1,6Mb)
sudist said:
I've tested on 1 and 10 (seconds I think)
There are programs that still work in SLEEP MODE (for example, autoflight is always telling me the time....even in sleep mode).
*Memory heap size = 1Mb (OsRemindMe = 1,6Mb)
Click to expand...
Click to collapse
i think the LED number for vibrate could be any number between 0 - 5, but i do not know for sure, it is 1 on my Touch. i must admit that setting the LED number is not very clear for first time users. I do not know how to make it so that it automatically uses the correct number.
I'm in the impression that you can not hear a sound if the device is in sleep mode. but perhaps i am mistaken? Autoflight generates a sound without waking up the device?
Thanks it's great
Always wanted an app like that for my WM6.1
nice piece of work
pretty nice work.. however, it would be good if following things can be revised?
--> can you plz add in a feature "number to repeat". FYI, i'm now using Throttle Launcher. So, i can't trigger off the reminder alarm. it would be good if it stops automatically after x-times (which can be set by user),
OR..
whenever i read/aware the missed call/msg, this reminder program would detect that missed call / unread msg = 0, thus OFF the reminder automatically. (This would be preferable)
Many Thanks....
add in some extra information..
davidfvk said:
pretty nice work.. however, it would be good if following things can be revised?
--> can you plz add in a feature "number to repeat". FYI, i'm now using Throttle Launcher. So, i can't trigger off the reminder alarm. it would be good if it stops automatically after x-times (which can be set by user),
OR..
whenever i read/aware the missed call/msg, this reminder program would detect that missed call / unread msg = 0, thus OFF the reminder automatically. (This would be preferable)
Many Thanks....
Click to expand...
Click to collapse
regarding above statements, perhaps i shall further clarify....
a) add in "number to repeat"..
example: reminder will give notification every interval of 2mins for 5 times
I'm now using Touch (with Throttle Launcher interface, 240x320), perhaps this reminder program need user to off it manually? yet, it's too bad that i can't trigger this button... so, i suggest 2nd option which stated above....
Thanks...
davidfvk said:
pretty nice work.. however, it would be good if following things can be revised?
--> can you plz add in a feature "number to repeat". FYI, i'm now using Throttle Launcher. So, i can't trigger off the reminder alarm. it would be good if it stops automatically after x-times (which can be set by user),
OR..
whenever i read/aware the missed call/msg, this reminder program would detect that missed call / unread msg = 0, thus OFF the reminder automatically. (This would be preferable)
Many Thanks....
Click to expand...
Click to collapse
if the user dismisses the missed calls and marks the unread sms as read while the program is running ,the program should know when not to give the reminder anymore.
however problems can arise if the program is not running and the user dismisses the missed call/unread sms notifications. the set reminder will then not be cancelled. this should be fixed in the next version. the next version will also have an option to clear generated reminders.
Hi,
Thanks for your prompt reply. Personally I think this program has great potential. Just wish it could be revised to a better software.
I tried it yesterday. It rings to notify me that i have missed calls / unread msg.. somehow, I went to read the msg and checked the missed call.. yet, the reminder won't stop.. (and i din see any button to be pressed to stop, if there is any? )..
plz advise?
Thanks
Related
There's been this issue with the Nike that when you enable vibration on incoming SMS alerts, it will at a certain point vibrate endlessly, and the only way to stop the vibration is to pull out the battery (if I can recall it right, even a soft reset won't stop it).
I don't know if there has been a fix for this already but I'm just gonna post this for people who wants their phone to vibrate when receiving SMS
The workaround is really simple, just download the app OS Remind Me here: http://forum.xda-developers.com/showthread.php?t=405071&highlight=hide+sim+contacts
Enable the vibration option and check the option "Unread SMS". On the "Alarm Sound" option, choose another kind of sound, one that makes less noise like the Default.wav, BECAUSE it will play at the same time with your default SMS alert tone and will mix up the sounds. Finally, make sure the program is running! Don't close it, use the "hide" function so it stays up and running.
And taadaaaaa... every time someone texts you it will vibrate
Thank you to whoever made this app!
Guess it's time to throw my hat in the ring. I've tried a bunch of screen blockers and for one reason or another wasn't happy with them. CurtainCall was developed for me and a couple friends to use on our phones for work.
CurtainCall is not Open Source software. I am granting a license to XDA users to use CurtainCall. CC requires the .Net Framework version 3.5 and Windows Mobile 6 Pro or greater. It has been tested on my Sprint Touch Pro with the original rom and Sprint's updated ROM. It has also been tested on the AT&T Fuze Original ROM.
Here's a list of features in this beta version:
Battery Meter
Tasks current / overdue
Scratch Caller Picture to answer and ignore incoming calls (Scratch down 50% to answer scratch horizontal 50% to send to voicemail.
Next calendar appointment
Caller Id info with name and number
Caller Picture
Unlock when Keyboard is slide out (Display orientation changes).
Unlock on charge or computer connection
Close phone Dialer when hang up occurs
Shell notifications audible alert works
Unlock when receiving call while syncing
Change screen BackColor when screen or caller picture is pressed while unlocking.
Display 12 hour clock with date
Display Service Location (Home Roam NoSVC, Search)
Display active signal strength
Display current speaker volume setting
Battery Friendly (No Timers to reduce battery life)
Exclude some applications from CC locking the screen (Safe Programs) Don't put in activesync or cc will never lock screen.
Do Not Distrub feature
Initially lock when in call
Configurable options Double Click X to close and hit setup button
Remain unlocked when call recv'd and keyboard is out
Displays status of current data connection eg EVDO 1X EDGDE etc.
Here's some basics on 1) unlocking CurtainCall so you can use your device and 2) Answering or ignoring calls from the CurtainCall Screen. 3) Exit application and Setup Screen
1) Press down on the Clock until the background turns yellow. The clock will change to 45%. Now slide your finger down the screen until the 45% (which is where the clock now used to be) goes to 0% and release the screen. The screen will be unlocked.
2) Same concept as #1. To answer the call press the caller picture on the top portion of the picture until the background turns yellow. Slide your finger to the end of the picture and CC will answer the call. To ignore the call press the left side of the callers picture and slide to the right. The caller will be sent to voicemail.
3) The X in the upper right corner is used to Exit the application, get to the setup screens, and enter a temporary Do Not Distrub mode.
The cab file that is attached will cause CC to start when your system starts and puts an icon under programs.
Let me know what you think and if your having issues. I'll do my best to fix them, but you should know I have a full time position in IT and am a family man. So, there are some limitations on my time.
CurtainCall Update Information
Version 0.7.9
Some graphics fixes and fix for unknown caller for name when it's id'd after the fact.
Version 0.7.10
Add display of Vibrate and Silent modes. Also did testing for Windows Mobile 5 users. Hit some platform limitations. CurtainCall will NOT run on WINMO 5.
Version 0.7.11
Add config option to allow setup of Auto Start with WinMo.
Add indicator to show Do Not Distrub is active. DND is permanently set in setup
Clean up some small issues with adding safe programs
Add a temporary Do Not Distrub button in the same screen as the Exit and Setup Buttons. Additionally allow for a DND profile of Silent and Vibrate. This is set in the setup screen. With DND on the phone will only ring once and then send the caller to voicemail. For me it's much better than meeting mode in WINMO.
Version 0.8.0
Changes to help users without slide out keyboard.
Changes For Touch Pro2 Tested on stock Sprint ROM with WM6.1
i'd be happy to try it out.. but please post some screenshots. thank you
Here is the screenshot
IT_Dude said:
Guess it's time to throw my hat in the ring. I've tried a bunch of screen blockers and for one reason or another wasn't happy with them. CurtainCall was developed for me and a couple friends to use on our phones for work.
CurtainCall is not Open Source software. I am granting a license to XDA users to use CurtainCall. CC requires the .Net Framework version 3.5. It has been tested on my Sprint Touch Pro with the original rom and Sprint's updated ROM. It has also been tested on the AT&T Fuze Original ROM.
Here's a list of features in this beta version:
Battery Meter
Tasks current / overdue
Scratch Caller Picture to answer and ignore incoming calls (Scratch down 50% to answer scratch horizontal 50% to send to voicemail.
Next calendar appointment
Caller Id info with name and number
Caller Picture
Unlock when Keyboard is slide out (Display orientation changes).
Unlock on charge or computer connection
Close phone Dialer when hang up occurs
Shell notifications audible alert works
Unlock when receiving call while syncing
Change screen BackColor when screen or caller picture is pressed while unlocking.
Display 12 hour clock with date
Display Service Location (Home Roam NoSVC, Search)
Display active signal strength
Display current speaker volume setting
Battery Friendly (No Timers to reduce battery life)
Exclude some applications from CC locking the screen (Safe Programs) Don't put in activesync or cc will never lock screen.
Do Not Distrub feature
Initially lock when in call
Configurable options Double Click X to close and hit setup button
Remain unlocked when call recv'd and keyboard is out
Displays status of current data connection eg EVDO 1X EDGDE etc.
The cab file that is attached will cause CC to start when your system starts and puts an icon under programs.
Let me know what you think and if your having issues. I'll do my best to fix them, but you should know I have a full time position in IT and am a family man. So, there are some limitations on my time.
Click to expand...
Click to collapse
Is it working on i780...?
Please replay if anyone tried.
-Pratap
Is it possible to show on what state the phone is, like muted or vibrating or normal? Maybe put in a small icon at the top. And maybe a functionallity to choose wheter you want to show a big caller picture or a small one.. I prefer a small one Or just make it possible to use the phone's dialer. When you misses a call the photo stays in the screen. I guess it would be better if you just go back to the mainscreen where you can see you missed a call. Now you don't see the other counters (sms, mail).
Can you tell me where the 'do not disturb' function is for?
Further is looks really great
RAHO thanks for trying CC. Muted can be seen by the nuber of )))) after the speaker. If there aren't any it's muted. I don't have anything for Vibrate yet.
As to making the picture smaller, One of the uses of the caller's picture is for answering the call. If you press the picture and swipe down 50% the call will be anwsered, or if you swipe horizontally it will send the caller to voice mail (Ignore). If I make the picture to small it will be easier to miss anwser which is one of the main reasons for curtaincall.
The purpose of do not distrub is to ignore all calls. You will hear one ring and then the call is sent to voice mail. That is set in the setup screen. \
By the way there is no need to close and re-open cc when you make changes.
Hope this helps, and I'm glad your liking it.
RAHO, I forgot to mention something. I left the picture up so I would see my last called. You can clear the picture by swiping it just like you were going to answer the call or for that fact ignore it as described in my last post.
Not working on HTC Universal WM5!
it works ok on an elf (6.5).
Simply brilliant.
Font is aliased on my qvga screen.
Icons are a little bit aliased on qvga.
I don't particularly like the chosen icons but hey... ;-)
Works quite well on my TP2 although it strangely flickers between the scratch to answer and slide to answer screens on a call. Also the last icon on the right is corrupt around the bottom edge.
Looking forward to updates.
Thanks!
Here's a couple of screen shots that shows a bit more of the functionality/
Answering a couple of posts...
First, Most developers suffer in artistic ability. I'm one of those. If you have some cool royalty free art I can use that is appealing I'm up for making some changes there. I started messing around a bit with gimp attempting to change things a few days ago, but my time to do that is pretty limited.
As to the WM 5 issue, CC was developed for WM 6.1 or higher. I'm open to looking at issue though. Exactly what problems are you having? It maybe that the object model is missing some pieces if that's the case I'll be forced to say that it's wm 6.1 or greater. Just let me know what's happening and I'll give it a shot.
I think it's very good for a first release! Just a few bugs so far like I said...
As to the graphics, maybe you could make it skinable for the graphics gurus?
It looks like I've put this in the wrong place. I'm sorry for doing that. I'm just now getting the lay of the land here at XDA.
Could some on move this thread over to Windows Applications and Games.
Thanks in advance.
I've had to uninstall this
It keeps fighting with the stock HTC slide to answer regardless of the settings.
Pity
Problem with caller id
I really like the approach of this app. My problem is that when I receive an incoming call, I get a text popup window with "Answer" and "Dismiss" options which cover the Curtaincall picture ID. Consequently, I cannot swipe the picture to answer or send to voicemail. Any thoughts on this one? I need the picture id to always be topmost on the screen. I am running Ultralite 6.5 ROM with SPB Mobile Shell.
thx in advance
mjf100 said:
I really like the approach of this app. My problem is that when I receive an incoming call, I get a text popup window with "Answer" and "Dismiss" options which cover the Curtaincall picture ID. Consequently, I cannot swipe the picture to answer or send to voicemail. Any thoughts on this one? I need the picture id to always be topmost on the screen. I am running Ultralite 6.5 ROM with SPB Mobile Shell.
thx in advance
Click to expand...
Click to collapse
Forgot to mention that I running this on an HTC Diamond Touch
@ IT_Dude: Thanks for your reply! It sure helps
I hope you can build in an vibrate-icon sometimes.
Can you give me abetter discripiton of what's happening. I kknow during the inital development phase I had trouble with during the first ring or two the dialer screen would fight to be on top. I got past that though. Are you running win 6.1 or the new 6.5?
MJ100, I'm not sure what text window you are getting. I know one of my alpha testers had some similar issues because he was trying to use slide to unlock in conjunction with CurtainCall. I had another alpha tester add activesync as a safe program which caused him a lot of grief. Try turning off (Deactivating) all your safe programs. If that's npt it can you send me a screen shot so I know a little more what I'm dealing with.
I've written a script called "RandomRingtone". This script allows to automatically change the ringtone after each incoming call. It needs MortScript to run (I'm using 4.3b15) and .NET Compact Framework 3.5. Tested on Benq E72, Windows Mobile 6.5 Standard.
Features:
Various work modes:
Regular - it doesn't change ringtone, little useless, but good if we want to "lock" current ringtone for a while,
Random - allows to select random ringtone,
List - user can specify the order of use.
Exlcusion lists: user can specify which ringtones shouldn't be used by script or which calling numbers shouldn't cause to change the ringtone.
Various notification types: after each incoming call name of actually selected ringtone can be shown as a message, displayed on the homescreen or omitted.
Ignore missed calls: when enabled, only answered call will cause to change the ringtone.
Don't change when meeting profile is active: in this profile no ringtone is used so there is no need to change the ringtone.
Detailed informations:
When work mode is set to "Regular", you still can change ringtones. Just click "Next ringtone", then new random ringtone will be chosen. When work mode is set to "Random", each incoming call will cause to select random ringtone. You can also force the change like previously, clicking "Next ringtone". In this mode, when "Loop" option is enabled, each ringtone will be used only once as long as there are ringtones which have been not used yet. When all ringtones will be used, the cycle starts from the beginning. Even if this option is disabled, next ringtone always is different than actually used. When work mode is set to "List", user can create the list with specified usage order. Clicking on ringtone's name will show context menu with options ("Remove", "Move up", "Move down"). When the list ends, it can be repeated or mode can be changed to random or regular (with given default ringtone). Regardless of chosen work mode, user may select to ignore missed calls - ringtone's change will be done only when call was answered.
User can specify excluded ringtones list. These ringtones will not be used by script, so e.g. these ringtones can be assigned individually to some contacts. Clicking on ringtone's name will display additional context menu. There is also one option which may be useful for that purposes - excluding some contacts. Contacts added to the list will not cause change ringtone when they are calling to us. These options are not connected, but when we assign static ringtone to specified contacts, it would be good if their calls will not cause to change the ringtone .. These options give us ability to do that.
Main script ("RandomRingtone.mscr") is automatically executed after each incoming call through other script, "RandomRingtone_loader.mscr", which is executed by "RandomRingtone_preloader0.mscr" or "RandomRingtone_preloader1.mscr". Those scripts are executed by a small program, "RandomRingtone.exe", which is running in the background and checking for incoming call. User should always run main script, not preloader's application or loader's script. When we want to turn on/off preloader, there is an option in main menu - "Active". To automatically start preloader when system starts, enable "Autorun" option in Settings.
After incoming call script can inform us which ringtone is actually choosen. This can be done in two ways: displaying automatically hiding message with countdown (5 sec.) or through plugin on homescreen. I used "CTestUIPlugin" which is the part of "SlidingPanel" (Bronze plugin), unfortunately I don't know how it looks in other phones. In the attachements I've added modified .xml and .cpr files. User may also supress this notifications selecting proper option.
Strings are stored in file "Language.ini". I've created two files (polish and english, sorry for poor translation, there are probably many linguistic errors, so it will be nice if someone would correct this file...). Error / warning / information messages are part of scripts and are only in english. While normal work you shouldn't even see these messages, but when something going wrong, see if in directory where script is stored exists file "ErrorLog.txt".
Ringtones need to be stored in "\Windows" or directly on "\Storage Card".
Installation:
Unpack archive and run "RandomRingtone.mscr". You need to have MortScript installed (tested on 4.3b15).
If you are using "AppToDate", place "RandomRingtone.xml" into your AppToDate folder (usually "\Application Data\AppToDate").
If you are using "SlidingPanel" (Bronze plugin), you can put "SlidingPanel.home.xml" into "\Application Data\Home" and "SlidingPanel_240x320.cpr" into "\Windows" directory. Standard plugin's icon was changed to "2401;2401" (you can do this manually, key "HKLM\Software\Microsoft\CHome\CTestUIPlugin", value "ICONPATHS").
I've attached polish language file, if you want to use them, change name to "Language.ini" and replace with existing one.
Known bugs:
Please report in this topic any bugs, even small or related with poor english translation...
Code:
1. Actual MortScript beta version (4.3b15) seems to has a problem with ExitSub or If...EndIf section, what causes unexpected behaviour even when ExitSub command is in condition which is not true, so shouldn't be processed. By this reason, there is no "Exit" option when we enter into "Ringtones list" submenu, instead of this we need to use "Cancel" softkey.
2. Probably from this same reason MortScript doesn't serve correctly some strings (in "Choice" window), so some ringtones name or options can be displayed incorrectly.
3. Very short incoming calls can cause to not recognize incoming caller number, so when we are using "Excluded contacts" list, script may change ringtone although user is on the list.
4. Few times when system was very low on memory and caller with unknown ID was calling while "Ignore missed calls" was disabled, my phone changed ringtone to default stored in rom.
5. When system is very busy, message which informs about used ringtone may stay in background and not shown.
Changelog:
Version number describes release date (YYMMDD) and version number released in that day.
Code:
100927.01
- Now small .exe application is responsible for incoming call detection, not script like previously. This application is less power consuming than continously running script, which was draining battery too fast.
100503.01
- User can enter script for meeting profile. When meeting profile is active, script will not change the ringtone.
- Minor bugs fixed.
100502.01
- Initial version.
I like it!
An exceptional piece of work!
is it supporting Inesoft Phone 6 ??
I didn't use Inesoft Phone, but it will be working, script uses system registry entries to detect incoming call, not dialer window's title. I don't know exactly what are the features of Inesoft Phone, so some functions may be overlapping but I don't think this happen.
Hi,
I don't know if u r interested in adding any features, but with all the architecture in your script, you might:
Personal tones for text messages
You could also select contacts by using the Cyclone command line app. This way it would pull up the contact list and then select a contact from their...
Of course you would need to handle the playing of the sound for sms.
Mortscript forever?
Is there some way to change the tasks and appointments notification system behavior in WM? Mine is already tweaked for use the classic alert interface,instead of the HD2 default one, and which I can choose between several predefined options for delay the task reminder, but from my point of view, this is very unpractical, because, in most of cases, this predefined times are not the ones I need. Other think that annoys me a lot, is the behavior of this notification interface when I choose the option for edit the task -> if I edit the task and change the hour of the reminder for, let's say 2 hours later, after press the ok button, WM doesn't closes the notification (as it does if, I choose the "delete task" one); it remains opened, and if I push the the dismiss button all the changes maked in the edition will be lost.
Moreover, most of all PIM apps, like Agenda One, ThumbCal, an so forth, use this built in WM interface for throw it's alerts, so this apps, in some way become unusables too.
SO... The questions are:
1. Is there some way to change the WM behavior with the alerts?
2. Is there some way to via cab, registry hack or so, for to get a menu where you can choose a desired delayed time for the task, alert or appointment in a precise way?
3. Is there some way for auto-close the tasks alert popup after edit it?
Thanks in advance and sorry if I didn't express mysell better. English is no my home language.
So is not possible?
Okay, here's the thing.
Everytime i drive to my girlfriend's house i have to write a message that i have arrived and she can come out but i have to prepare text it while standing in the traffic jam, at the traffic light or while driving (it's uncomfortable and dangerous!).
So i though - what about a shortcut on my home screen or in my "Car Home" app that:
will send a certain template message to a certain recipient just by one click on the shortcut (well maybe can be two clicks that the second will ask for confirmation "YES/NO").
Thanks for ideas and answers.
Maybe a custom shortcut?
But my knowledge in coding is 2/10 so any detailed help or a link to a certain app with details would be appreciated.
Thanks!
Tasker can do this. It can even be set up to automatically send the message for you as you are close by, based on GPS and/or cell tower locations. I remember seeing a profile for it in the tasker wiki.
Thanks for reply. will try that.
So far used AUTO SMS app, that has "Instant SMS" feature and has a widget for it, so from a lock screen it's "3 click away" - awake, press widget, press send