i just brick my NIKI, it hung at the WM61 green screen, so far I can enter the rainbow screen, but I can't upgrade the device by Custom_RUU tools.
I get to know flash elf by SD was rename NBH file to ELF0IMG.nbh, is there anybody know how to rename the nbh file for NIKI? what is the file name for NIKI?
Thanks in advance!!!
xttt2005 said:
i just brick my NIKI, it hung at the WM61 green screen, so far I can enter the rainbow screen, but I can't upgrade the device by Custom_RUU tools.
I get to know flash elf by SD was rename NBH file to ELF0IMG.nbh, is there anybody know how to rename the nbh file for NIKI? what is the file name for NIKI?
Thanks in advance!!!
Click to expand...
Click to collapse
why cant you upgrade from the bootloader (rainbow). did you security unlock or use hardspl? have you tried a hard reset?
if you are not unlocked/hardspl and hardreset doesnt work then you must flash an origional carrier ROM meant for your device.
You jast need to rename your .nbh file to nikeimg.nbh, and then push the camera button while turning on device. Then follow the onscreen instructions.
if i do that, i see a white screen with "loading" on it. after a 30 minutes still the same?
What is the problem?
xttt2005 said:
i just brick my NIKI, it hung at the WM61 green screen, so far I can enter the rainbow screen, but I can't upgrade the device by Custom_RUU tools.
I get to know flash elf by SD was rename NBH file to ELF0IMG.nbh, is there anybody know how to rename the nbh file for NIKI? what is the file name for NIKI?
Thanks in advance!!!
Click to expand...
Click to collapse
you must rename in "NIKEIMG" ....see that
http://forum.xda-developers.com/showthread.php?t=437392
kenshin-J said:
if i do that, i see a white screen with "loading" on it. after a 30 minutes still the same?
What is the problem?
Click to expand...
Click to collapse
when i flash from mcrosd,the update,start immediately after loading....i think that in your case,something is wrong....are you sure that you rename in caps letters?...is "NIKEIMG.nbh" and not "nikeimg.nbh",for example...
But what is meant with "two files"? One file must be the NBH Image but what's the other file? CustomRUU.exe?
animelover said:
But what is meant with "two files"? One file must be the NBH Image but what's the other file? CustomRUU.exe?
Click to expand...
Click to collapse
yes it is!...NIKEIMG.nbh & CustomRUU.exe....exactly!
then NIKI can't flash by SD in the end?
i got a same probrom,it hung at "loading"
card from is fat32
name is nikeimg.nbh
0pod0 said:
then NIKI can't flash by SD in the end?
i got a same probrom,it hung at "loading"
card from is fat32
name is nikeimg.nbh
Click to expand...
Click to collapse
The filename must be NIKEIMG.nbh! Try it with big letters instead of normal letters!
i've already use NIKEIMG.nbh but it still hung at "loading"
and i tried to flash hspl by SD,
i run sspl-1.16-niki.exe,it still hung at 'loading"as well.
is the sspl-1.16-niki.exe cant flash anyrom by SD,or only cant work by USB?
if you havent hardspl ... it only work via USB!!!
SD-Card works too ... if you dont need load Software SPLs first.
you mean that i have to unlock/hspl first,than it will done?
but i cant unlock/hspl with usb
no USB = no chance!
Related
As i only can flash my device trough the SD card
i can't find any 1.72.181
. nb1 romimage for SD-cards.
I would appriciate i sombody could help me where to find it...
sorry for my poor english..
sorry to ask, but where can i read the method of sd flashing an XDAII?
Or can you explain plz ?
see the following link:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=93
Comment on this link.
To get the wrigth formation on the SD card is to Download the "old OS"
to the card and then to put the new os on top of that. This will assure you to have the rigth format, to make XDa "booth up" (not mention make and keep a back up of the old OS just in case...)
Seems due that its hard to find a nb1 image file on the latest O2 release...
is it just the nbf file you need i can post it if u need it
The Hobbit said:
is it just the nbf file you need i can post it if u need it
Click to expand...
Click to collapse
i have the obnocius v0.23 bootloader that wont take anything less than complete nb1 image file. i have tried like nk.nbf upgrade but it wont catch. may be i should edit the sd card at 0x00000000. the rom.nb1 starts with HIMMALAYA at this address. the nbf's with something else. what do think?
The Hobbit said:
is it just the nbf file you need i can post it if u need it
Click to expand...
Click to collapse
Hi,
this is very interesting, I've been trying to create a bootable sd card using the latest Oz rom. However there is not much clear info. How can I get ms_.nbf, NK.nbf. Radio_.nbf on an sd card? what are the exact offsets, do I need to decrypt the files first, etc. I tried the [reverse] method described here --> HimalayaHowtoCopyRom just to check, yet the eventual Radio_.nbf file is much smaller than the size of the original Radio_.nbf file installed on the himalaya. I'd appreciate if someone could give us detailed procedure to create an sdcard from the nbfs.
thanks...
The Hobbit said:
is it just the nbf file you need i can post it if u need it
Click to expand...
Click to collapse
i have the obnocius v0.23 bootloader that wont take anything less than complete nb1 image file. i have tried like nk.nbf upgrade but it wont catch. may be i should edit the sd card at 0x00000000. the rom.nb1 starts with HIMMALAYA at this address. the nbf's with something else. what do think?
The Hobbit said:
is it just the nbf file you need i can post it if u need it
Click to expand...
Click to collapse
i have the obnocius v0.23 bootloader that wont take anything less than complete nb1 image file. i have tried like nk.nbf upgrade but it wont catch. may be i should edit the sd card at 0x00000000. the rom.nb1 starts with HIMMALAYA at this address. the nbf's with something else. what do think?
In case you have a preproduction HERMES and you can not update the ROM (due to the fact that your bootloader is <1.04) here the very easy solution:
- format a SD card with FAT32
- extract the .NBH file from the rom image you like
- rename the .NBH to HERMIMG.NBH and copy it to your SD card
- put SD card in phone and start it in bootloader (hold OK button on left side and POWER button at same time and stick with stylus in RESET on bottom)
- confirm flashing on screen
- flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes.
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
John
P.S. Same applies to other devices: BREEIMG.NBH, STARIMG.NBH, ...
Re: Solution for flashing HERMES preproduction devices found
Hi J.S.!
This is a very great finding!! How did you find that???
J.S. said:
This also works for normal (non preproduction) devices but keep in mind that if the CID does not match the flashing might not work.
Click to expand...
Click to collapse
Preproduction devices are superCID, so they should be able to flash any image using that method.
J.S. said:
P.S. Same applies to other devices: BREEIMG.NBH, STARIMG.NBH, ...
Click to expand...
Click to collapse
I guess BREEIMG is for HTC Breeze and STARIMG for HTC Startrk, right?
Holy Sweet Jiminy Cristmas, OK, now this is what mine is doing so far, (which is further than any thing else we have done)
Sitting at Checking..., and has been for around 10 minutes or so now
Will keep you updated, hey anyone able to get access to the holy grail of HTC support site?
Excellent news!
I just need to get my hands on a micro SD card and I'll give it a whirl!
Thanks again, buddy.
I'll let you all know how I get along.
Oz
So how long did your screen stay with the Checking..., as I am now on my 4th IMG to try, and all have taken over 10mins each while on the checking.
I need some slepp so this one i will let run while i sleep.
Any way of changing the CID, as mine is not preproduction.
darkoverlord said:
Any way of changing the CID, as mine is not preproduction.
Click to expand...
Click to collapse
No known method yet...
But you have a TyTN as I have seen in your other post, so you can flash the HERMIMG.nbh from HTC TyTN rom which will match your CID.
OK, but how can I know my CID, and which one to choose.
darkoverlord said:
OK, but how can I know my CID, and which one to choose.
Click to expand...
Click to collapse
The bootloader command "info 2" returns your CID, on a TyTN that is:
"HTCS" + "QTEK_001" + (4-byte checksum) + "HTCE"
You can also find it by running GetDeviceData.exe.
These are the ROMs an it's CID lock:
HTC: QTEK_001
Dopod: DOPOD001
JasJam: CDL__001
Cingular: CWS__001
O2: O2___102
great stuff, J.S. )
buzz
Hi Guys, At this point is it possible to get an .NBH file from a .RAW file and so flash back to my original shipped ROM?
wwaveydave: It is not possible, see my answer here:
http://forum.xda-developers.com/viewtopic.php?t=62730
The Hermes SPL searches for two files on SD card, one is HERMIMG.nbh as pointed out by J.S. on this topic, the other one is HERMDIAG.nbh.
Anyone knows about what is HERMDIAG? looking at the name seems some kind of DIAGnostic SD card... :?
I've been told by itsme that HTC StarTrek supports 2 ways of sd-card flashing:
1) with 'starimg.nbh' on a fat32 filesystem (same as in hermes, but using hermimg.nbh instead)
2) with a typhoonnbfdecode.pl generated sdcard
I've tried to generate a cooked rom for TyTN using typhoonnbfdecode.pl, but the .nb files extracted using nbh2dbh.pl and dbhdecode.pl are not valid, it seems that typhoonnbfdecode.pl expects the .nb files to be decoded as sd header image (using flag "-i" of typhoonnbfdecode.pl itself), but this tool is not useful to handle NBH files.
Also trying to make a NBF file with typhoonnbfdecode.pl out of .nb files extracted from original shiped NBH file gives an image validation error on each module specified in ' -r '.
Any help will be much appreciated!
hermdiag.nbh is a diagnostic/setup/lock/unlock SPL image.
buzz
If you compare the NBF file you've created to the NHB file pulled from one of the shipped ROMs will that help? I'd like to help, but need time to get up to speed on the whole ROM cooking process.
The problem is that I cannot even create the NBF... I get a validation error in every module, like if all the .nb files where invalid:
- no sm signature at 0 in Splash
- no 7 * jump +5 at start of gsm
- no ECEC at 0x40 in OS image
- no IPL at 4 in IPL image
- no ECEC at 0x0040 in SPL image
any ideas?
Right guys,
I've tried the method outlined in the originating post but it doesn't seem to work for me on my Preproduction Hermes. This is what happens:
1) Format 1GB Micro SD card to FAT32 via Windows (right click and select Format).
2) Extract .nbh file from ROM image.
3) Rename .nbh file to HERMIMG.nbh and copy to SD card.
4) Put SD card in phone and start in bootloader (as specified)
5) The screen goes white for a second and then an error message pops briefly (about a millisecond! I had to do about 20 times before I could be sure about what it said). The error message was "No Image file!"
6) Reverts back to bootloader.
Have tried this with all of the English ROMs listed on the Wiki and get the same result each time. I'm not connected to the PC during all of this. The only file that exists on the SD card is the HERMIMG.NBH (exactly that naming format).
Any help would be much appreciated.
Oz
ok, follow these instructions:
1) Use the "Explore" option on activesync
2) Erase all the files in storage card
3) Copy HERMIMG.nbh
4) Enter into bootloader
No need to remove the microSD card from your device at all... this is how it worked for me.
No such luck for me I'm afraid. I still get the same error. I don't understand it, what is this Image file it's looking for? Is there anyway of determining it?
@pof - is your Hermes preproduction?
I've tried a smaller SD card of 128MB and renamed the file to HERMIMG.NBH but still no luck. I don't know if it's my phone or if preproduction phones except the filename to be different.
Is a .nbh file an image file?
mine is not preproduction, it's an HTC TyTN (HERM200). My microSD card is 1Gb.
I renamed the .nbh file extracted from the rom upgrade exe to "HERMIMG.nbh", I don't know if it's case sensitive or not. It worked for me this way...
And yes, nbh files are rom upgrade files which contain all the rom parts (splash image, radio, ipl, spl, etc...) and are signed by HTC.
Hi,
have got m3100 which is stuck on the winodws mobile screen...so tried everything frm the wiki page and now want to try flash it thru the sd card.
I have got 512mb MicroSD ...
can someone pls explain me abt the root folder...i just copied the HERMIMG.nbh onto the sdcard and the screen wont go beyond "checking".
i dont knw abt the Root folder...how shall i create it? if anybody can help me pls
thx in advance!
XtremeGG said:
can someone pls explain me abt the root folder...i just copied the HERMIMG.nbh onto the sdcard and the screen wont go beyond "checking".
Click to expand...
Click to collapse
The root folder means the folder which "holds" all other folders: If your microSD card is on "F:", the root folder of your microSD card is "F:\".
It is on the instructions to make sure you don't copy the NBH file in "F:\My Documents\".
The card has to be formatted in fat32 and empty: should only contain HERMIMG.nbh in the root folder
The NBH image must match the CID on your device: You have a M3100 and there's no shipped rom with "ORANG001" CID, most probably your problem is this.
Hi pof...thanks for ya explaination.
if there is no shipped rom..does that mean..the HERMIMG.nbh file i got frm wiki...it wont work?
thanks agn
P.S. yes...i downloaded the Orange one frm wiki...if that doesnt come with ROM...can i flash it with the Radio ROM u supplied for the unlock? rename it HERMIMG.nbh
M3100 from Orange UK has CID: ORANG001
The rom on the wiki is from Orange Romania and has CID: ORANG008
You need to use a NBH file with the same CID on your device.
You can make your device SuperCID to avoid this restriction:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock
ohhhh...k..can i flash that patch thru the SD card as well? the radio patch..
i really appreciate ur help pof
thanks!
XtremeGG said:
ohhhh...k..can i flash that patch thru the SD card as well? the radio patch..
Click to expand...
Click to collapse
No, only through USB.
ok..doing that now...on my pc...its syin "Cheking information on your device...please wait..."
will it flash the patch radio ...even tho my m3100 wasnt startin well before? (was gettin stuck on windows screen)
once its done..i will post the result
POF....thank you very much m8...absolutely fantastic..i flashed the Radio ROM Patch..and the phone back alive agn...unlocked it as well
brilliant ..brilliant...thanks agn man!
XtremeGG
cool! glad it's back to live
Small soft-pack for removing free space from Gene ROM, make lzx compressing ROM and set Extrom size to 2MB (extrom will be cleared).
After use it and flashing new ROM, you will have 65-70 MB of user storage.
Use it on own risk.
Usage:
1. Unzip this archive to one folder (for example c:\lzx).
2. Put file ruu_signed.nbh from your ROM in this folder too.
3. Run make_lzx.cmd
After it work about 5 min, and you will have new ROM as file GENEIMG.nbh in this folder.
Flashing:
This ROM cant be flashing throught RUU.
You must flash it from SD-Card.
On your device must be HARD-SPL installed !!!
Format SD-Card as FAT32.
Put GENEIMG.nbh on SD-CARD.
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 5 min long. After you will see "Success. Press any key". Do soft-reset. Congratulation.
But if you see 3-color screen, then you mast do magic with your SD-Card.
See http://forum.xda-developers.com/showthread.php?t=371147
Good luck!
Cant upload file to this forum.
Download from http://www.filefactory.com/file/8f6656/
thanks orefkov .. will give it a shot tonite.
hmmmm will try it tonight
orefkov i am getting this error bro .........
NJackal said:
orefkov i am getting this error bro .........
Click to expand...
Click to collapse
try unpack archive closer to root folder, ie c:\lzx
Or try it on WinXP.
need help
i have successfully flash the rom with this tool, after that i soft reset, device automatically boot into windows mobile 6.1, runs all the basic setup (screen align, date setup), then it automatically load some setup, after setup, device automatically reset..... PROBLEM start here, it stop at the first screen, refuse to boot into windows... i hard reset, soft reset, still the same, anything wrong?
try press power button some times, or reinsert the battery.
NJackal said:
orefkov i am getting this error bro .........
Click to expand...
Click to collapse
hmmmm no change getting the same error again ............. and i am using xp only bro it is a vista theme only ..........
NJackal said:
orefkov i am getting this error bro .........
Click to expand...
Click to collapse
Have you tried appending the temp folder's path in CMD? The process cannot find the file - so appending the path might help. Also, the batch file doesn't seem to recognise long filenames. That could be the reason the files inside your desktop can't be found.
I create GENEIMG.nbh from a wm6.1's nbh file by your tool and flash it successfully. But it stop at the first screen, refuse to boot into windows... i hard reset, soft reset, still the same, anything wrong? Thanks a lot!
That work unstable on 6.1
Try on 6.0
Or try with that xip.
orefkov said:
That work unstable on 6.1
Try on 6.0
Or try with that xip.
Click to expand...
Click to collapse
Thanks a lot! I'll try that again by your new Xip and report the result.
Hello, orefkov:
I try your new xip, but it has the same problem.
I'm using is not a official rom but a chinese version with core 19199. What I can do? Thanks!
then you mast do magic with your SD-Card.
what is the magic??
I dint get u..
Every ROM cant be flashed from SD card.You must make it to boot from SD card.Also make sure that you have formatted SD card in FAT32 and proper chunk size.
Hi apologies for the question in advance!!!
Im trying to flash a radio onto my O2 stock rom .. i ave successfully put hspl on device but when i try to flash the radio nothig happens????
I have renamed radio RUU_Signed.nbh and when i run custom ruu i get a prompt from computer to allow programme which i do and then nothing happens
THIS IS DRIVING ME MAD I HAVE SEARCHED THE FORUMS WATCHED THE YOU TUBE DEMO AND CANT THINK OF ANYTHING IM DOING THAT IS WRONG ????????????????????????????????????????????
Have you tried to copy the radio file (rename it to LEOIMG) to your SD card, reboot while holding volume down, and flash from there?
Will give it a go now thanks for the help much appreciated
NO LUCK STILL WONT WORK IM SURE IM JUST DOING SOMETHING WRONG BUT I DONT KNOW WHAT...
ABOUT TO THROW PHONE
you did unzip teh radio file and extract the .nbh, right? you didnt just rename the zip(or rar, or 7z, whatever) to .nbh did you?
(by teh way, for usb flashing, no need to change teh filenmame at all, just extract the .nbh, put in folder with customruu.exe, and run customruu. And of course this wont work if your spl ends .0000)
So you copied the radio file (named LEOIMG) to the root of your SD card?
You get past the 3 colored bootloader?
What msg do you get, whats happening?
Edit: What samsamuel said, you have to unzip the file first ofc
Hi yes to above i did extract, tried custumruu no joy, tried renaming LEOIMG AND SAVING TO SD CARD ROOT hold power and down volume , it goes into bootloader and just sits there doing nothing in the red band it says SPL-2.08 HSPL, and in the white band it says SERIAL?????????????????
does your pc run avast or mcafee? they can disable customruu. you can tell because when you run it nothing at all happens.
as for sd card failing, have you formatted it since you got it? cos the o2 stock one comes formatted to FAT but need to be FAT32 for flashing.
also, many 16gb and some 8gb cards can be temperemental
Thank you everyone
problem was with the computer not the process tried it on the desktop instead of lap top and it worked first time