Ok so first is first.. I did read the wiki and I have searched.. even posted in a rom 3.42.50 post (i think that was it) but no replies...
so in that other post I followed the instructions.... I used a 512mb micro sd and a 64mb micro sd....
jambrose said:
FROM THE TITAN WIKI:
Flashing a phone with a micro SD card
1. With a card reader on your PC, format a non-SDHC (<=2GB) microSD card into FAT32 (tested to work up to a 4KB cluster size)
(the default size for a 1 GB would not work, also if it takes only a few seconds to format
try formating with some other slot/device. A 1 GB took over a minute to format correctly)
To format your Card - Open a DOS box and type/copy and paste this: ( format ?: /FS:FAT32 /A:1024 )
Replace the ? with whatever your SD cards drive letter is... ie: f, h, I.... Mine is G....
2. Copy the ROM to flash (xxxxxxxx.nbh) to the root of the microSD
3. Rename the ROM xxxxxxx.nbh to TITAIMG.nbh
4. Insert your card.
5. Force into the boot loader with POWER-CAMERA-RESET
6. Follow the instructions and you'll quickly flash your Titan...
7. You may have to soft reset once it says the update is complete
(If you are using UC let the customizations run so it will read the SDConfig.txt file)
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this GPS ROMs) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
Click to expand...
Click to collapse
so i have been trying this for a while tonight.. cant get it to work...
I am getting the Loading... screen.. all grey but that is it...
512mb micro sd... TITAIMG.NBH file exists...
any ideas??
I did not install olipro 2.40... should I??
alot of views but that is it..... hmm...
ok I installed nueSPL-2.47
so now it says.,.
TITA100
SPL-2.47No2Chem Titan SPL EVT CPLD-9
still cant get it...
now trying to boot to upgrade the rom I get the reg, green, blue, white part of the screen... and it says serial....
can anyone help me???
it sounds to me like you have nueSPL installed correctly.
In the past I have had problems with formatting sd cards, the only reliable way I have found to format them so that they work for flashing roms is to use the nue format utility... it is up somewhere on nuerom.com
It will erase everything on your card, so back it up first
after the card has been formatted, copy the "TITAIMG.nbh" file to the root of the card
Put the card in your phone and reboot into bootloader mode
it should detect that there is a rom image on the card and ask you to press the power button to continue.
The flashing process takes about 1 minute to complete (so much faster than using activesync)
Once everything is done it will say something like "process complete", and then you soft reset and you are done
which rom are you trying to install?
mpenguin14 said:
which rom are you trying to install?
Click to expand...
Click to collapse
yeah was weird... on about the 12th try of doing so much... copy rom, format, etc... eventually got it...
so which rom....
now I am ready for recommendations on this...
Here is what I use my phone for..
1. Phone - duhhhhh
2. GPS - Big time use....
2.a. Speedometer for my pickup truck... gpsspeedometer.exe
2.b. iGuidance
3. few games
4. Sirius radio via wifi
I do not have a data plan.... was going to get one soon but just bought a 2008 silverado z-71 crew cab.. so car payment is a bit much... so dont want to fork out the extra on a data plan.....
I have to check again but I think this is the one im going for...
Titan M2D Round 4 ROM (DCD 3.2.6 and TouchFlo 2D)
my biggy was getting the radio upgraded more importantly for better GPS... however I have got it to sync yet.... well im inside the house and cant get it to sync... raining outside too....
TeleFragger said:
yeah was weird... on about the 12th try of doing so much... copy rom, format, etc... eventually got it...
so which rom....
now I am ready for recommendations on this...
...
I have to check again but I think this is the one im going for...
Titan M2D Round 4 ROM (DCD 3.2.6 and TouchFlo 2D)
Click to expand...
Click to collapse
I am glad that you were able to get it working. I enjoy flashing different roms, but am not really a nit-picky user.
I fonally donated to no2chem today so that I can use his nueRom3-pre3, it is a pretty nice rom that gives you the option to disable your camera and get an extra 8 MB in free ram, I am also really liking the nueWifiSwitch. But like I said you have to donate to get the rom, and I have only been using it for 6 hours or so.
before that I was pretty much exclusively on a custom build of DCD 3.2.6, just a bare minimum rom, which I like because I flash quite often.
It does seem like people are liking the "Titan M2D Round 4 ROM" a lot. It looks pretty good, in fact it even includes a program that I made, Manilla 2D Customizer, which will let you tweak Manila 2D and apply some themes.
Good luck, and I hope flashing your rom via SD card goes a little bit smoother than your radio flash
Related
ok my phone is HTC 8525, with WM 6.1 professional . It worked fine for 3 days then it start freezing , before it does that a blue background will appeare ,then it will not let me do anything at all . When I try to touch an icon, it will say something like invalid location or could not find target . I have to hard reset it. sometimes I have to reset it 4 or 5 times a day . , In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ? please help me I truly appricat it . In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ?
Hmmm, "the mini card will freeze the whole phone"??? Are you referring to the SD Storage Card? Do you have any volatile data stored on the card? Any Today Screen Applications?
If this is the case, try shutting off the phone and removing the card. Then place the card into a card reader, and plug it into your PC. Make a folder on the desktop of your PC, and COPY all the contents of the SD card to the folder.
Now, reformat the SD card in your PC, as FAT32, and default for all characteristics.
Once reformatted, copy all that stuff back onto the SD card from the temp folder on your desktop, making sure everything is returned to it's original locations. Pop the SD card back into your phone and see if it's fixed. Sometimes, corrupted space on the SD card will make the phone behave very badly. Hopefully, this procedure might fix it for you.
-pvs
Yes Sir, i apaologize , i was refering to the SD card . i am just tierd resetting the phone every 4 hrs . do you recomend any shops that can fix the soft -ware . i notices when i start the phone and i go to clean tmp it will say" 8 Fils and 4 folders of 656 Bytes cleard ! . then 5 hrs later the blue screen comes back
After doing what pvs said, and if you still have problems I'd check for bad blocks with MTTY... I would also ,after confirming no bad blocks, would flash a stock rom then reflash wm 6.1 and see if that helps... Cheers...
Wow , how to do all that if you dont mind me asking , actually i took the SD card out i am not in need for it at the moment . can you please help me to do what you said and i truly appreciat it , Great thanks for both of you gents
pvs already says what to do in his previous post...
To check for bad blocks follow this : http://forum.xda-developers.com/showthread.php?t=377389
To Flash a stock rom you need to know what carrier the phone was on. Download the wm6 update from their site and, Making sure you have Hard SPLed your phone, I suggest flashing via the sd card method. Its safer than flashing through pc.
Format sd card fat32. copy .nbh file of the stock rom (you may have to search for it) onto the sd card and rename to "hermimg.nbh". Put back in hermes and reset to bootloader (power button, OK button above flywheel and soft reset with stylus. Hold all buttons until it goes to tri-colour screen). It should recognise the os flash and load up a screen showing 1st boot screen, 2nd boot screen, gsm And os (or something like that as cooked roms don't generally have the gsm part). MAKE SURE YOU HAVE AT LEAST 50% BATTERY!!!!! Follow the prompts... I generally use the sd card method to flash ALL my roms so I don't have problems like usb disconnecting or pc rebooting/hanging or power failures.
Hope this helps you out, Cheers...
BASELABBAS ... Please describe what you are doing when you say that you are "HARD-RESETTING" several times a day. Are you:
1) poking the stylus into the hole at the base of the unit?
- or -
2) holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]?
If you are doing the first ... this is called a SOFT reset. The second is a HARD-RESET, and will wipe the phone clean of ANYTHING outside of what came with the ROM itself.
Since you have posted that you already removed the SD Card from the device, and can (for the time-being) live without it, I recommend you do an ACTUAL Hard Reset (backup anything you need to keep first) via step #2 above, and then be patient about installing any apps. I wouldn't do anything more than sync it up via ActiveSync with your contacts for the first few of days. If things start to go crazy without any third-party apps installed, then I would look into the steps that ultramag69 has suggested ... starting with a flash to a stock ROM.
WM6.1 has been a bit shaky on our Hermes thus far. Some people are getting good results, but a lot of others are having issues like you are describing. I would suspect that your ROM might not be a good match, before I'd suspect bad blocks at this point (and it's a bit easier to test for).
If the stock rom does better on your device, you can try flashing back up to a WM6.1 ROM after that. And if you haven't already, make sure that you have installed HARDSPL before doing any of this stuff.
Good luck,
-pvs
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]. I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
it looks like i need to update
this what is say
From :
Image Version : TNT.19199
to
image version 2.05.255.1
BASELABBAS said:
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR].
Click to expand...
Click to collapse
OK, well that's definitely a Hard Reset. So your WM6.1 Rom is acting flaky right aftwerwards, eh? I would say it's time to try a different ROM, as we've been discussing above.
BASELABBAS said:
I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
Click to expand...
Click to collapse
No ... try Hard-SPL-V7.zip found at the bottom of THIS PAGE. I THINK you can flash it via the SD method if ActiveSync isn't working for you (if not, somebody please correct me). To do this, open the downloaded ZipFile with WinZip or WinRAR and copy the file inside named RUU_signed.nbh to your desktop. Rename it HERMIMG.NBH, and copy it to the root of your freshly reformatted (FAT32) Storage Card. Put the Storage Card into your device and press the side OK button and the power button simultaneously while resetting with the stylus until the tri-color screen appears and turns white. The device will find the HERMIMG.NBH file and offer to upgrade by pressing the Power Key. This will install HardSPL onto your device without the need for ActiveSync. You can also flash ROMs in this manner.
Again, good luck,
-pvs
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
ultramag69 said:
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
Click to expand...
Click to collapse
Thanks for checking me on that, Ultramag. I had a feeling there was something I was forgetting.
-pvs
I currently have Radio 4.42.30 installed.. I also had 3.42.02 prior too but did not see any significant change in GPS Locking.. Finally I found a set up that best suits me.. Try this..
Install Titan Radio 3.42.30..
http://forum.xda-developers.com/showthread.php?t=403280
If you have problem flashing from SD card then follow these steps:
1. Download NueSPL2.47[Newest Release]
2. Back up your files on you mSD card to your PC
3. Extrac and place NueSPL2.7.exe on your SD card
4. Run it.. this program will format your SD card to enable flashing from SD [if its not already formatted CORRECTLY]
5. NueSPL will place the BOOTLOADER file onto your SD card and name TITAIMG.nbh... Let it run.. it will now update your Hard SPL to version 2.47
6. it will automatically put your phone into Bootloader mode
7. The gray screen will pop up indicating that its flashing a BOOTLOADER
8. Press the power button when prompt to start flashing after it finishes.. allow NueSPL2.47 to clean up..
9. your phone will restart..
10. Place RADIO named TITAIMG.nbh onto your SD card
11. put your phon into bootloader mode by pressing POWER+CAMERA+RESET buttons
12. Bootloader should now recognize TITAIMG.nbh as CDMA not Bootloader..
LET IT RUN AND YOU'RE DONE!
NueSPL2.47 found here... Thank No2Chem for his work please...
http://forum.ppcgeeks.com/showthread.php?t=30561
Appy this Titan GPS FIX...
http://forum.xda-developers.com/showthread.php?t=400975
An updated version of QPST Program is found in Post #178
Intall AstroGPS if you have TomTom7 or iguidance.. I use the TomTom launcher.. Huge difference..
http://forum.xda-developers.com/showthread.php?t=364199
This is My set up.. I didnt notice a big changes before I applied the GPS FIX.. Now my GPS locks within 5 seconds.. Good luck..
b16daddy said:
I currently have Radio 4.42.30 installed.. I also had 3.42.02 prior too but did not see any significant change in GPS Locking.. Finally I found a set up that best suits me.. Try this..
Install Titan Radio 3.42.30..
http://forum.xda-developers.com/showthread.php?t=403280
If you have problem flashing from SD card then follow these steps:
1. Download NueSPL2.47[Newest Release]
2. Back up your files on you mSD card to your PC
3. Extrac and place NueSPL2.7.exe on your SD card
4. Run it.. this program will format your SD card to enable flashing from SD [if its not already formatted CORRECTLY]
5. NueSPL will place the BOOTLOADER file onto your SD card and name TITAIMG.nbh... Let it run.. it will now update your Hard SPL to version 2.47
6. it will automatically put your phone into Bootloader mode
7. The gray screen will pop up indicating that its flashing a BOOTLOADER
8. Press the power button when prompt to start flashing after it finishes.. allow NueSPL2.47 to clean up..
9. your phone will restart..
10. Place RADIO named TITAIMG.nbh onto your SD card
11. put your phon into bootloader mode by pressing POWER+CAMERA+RESET buttons
12. Bootloader should now recognize TITAIMG.nbh as CDMA not Bootloader..
LET IT RUN AND YOU'RE DONE!
NueSPL2.47 found here... Thank No2Chem for his work please...
http://forum.ppcgeeks.com/showthread.php?t=30561
Appy this Titan GPS FIX...
http://forum.xda-developers.com/showthread.php?t=400975
An updated version of QPST Program is found in Post #178
Intall AstroGPS if you have TomTom7 or iguidance.. I use the TomTom launcher.. Huge difference..
http://forum.xda-developers.com/showthread.php?t=364199
This is My set up.. I didnt notice a big changes before I applied the GPS FIX.. Now my GPS locks within 5 seconds.. Good luck..
Click to expand...
Click to collapse
Thanks for taking the time to write this!
I've been meaning to check out NueSPL but haven't gotten the chance yet...what's the advantage of having it versus Olipro 2.40?
kmartburrito said:
Thanks for taking the time to write this!
I've been meaning to check out NueSPL but haven't gotten the chance yet...what's the advantage of having it versus Olipro 2.40?
Click to expand...
Click to collapse
also, what are the advantages of the updated QPST?
the original QPST was a beta version and the one in the later post is the final release.. for example.. for the first release.. after you added a Comm Port and want to remove it.. it wont be removed until you restart QPST.. where in the new version.. it removes right away.. they're both the same but the later one is more stable i guess..
i found that getting an instant lock is as simple as:
installing the radio
installing the rom
installing carrier cab
soft reset
reinstall radio
dial *228 2
dial *22899
instant locks every time
Any chance of seeing this for Sprint? I've got Radio 3.42.30 and stock ROM 3.56.351.0. I have QuickGPS installed updated and I'm still taking 2-3 minutes for a lock in Google Maps.
yrsmart said:
Any chance of seeing this for Sprint? I've got Radio 3.42.30 and stock ROM 3.56.351.0. I have QuickGPS installed updated and I'm still taking 2-3 minutes for a lock in Google Maps.
Click to expand...
Click to collapse
Update PRI to 2.03 or 2.04
Awesome!
My GPS hasn't worked in months.
That SPL upgraded FIXED my ****ing mSD card upgrading problem.
Hi guys
I own a HTC TYTN (Vodafone 1605) having WM5 and would like to have latest updates and features on it. I checked HTC site and i suppose they are not offering any updates for this model.Please help since i am not very used in doing upgrades etc.
Thanks
Ashok
Start here!
DO THIS FIRST!(MOST IMPORTANT)
HARD SPL
http://forum.xda-developers.com/showthread.php?t=296722
THIS IS NEXT
SIM/CID Unlock
http://forum.xda-developers.com/showthread.php?t=293665
THEN GO HERE
Schap's WM6 ROM (It's great!)
http://forum.xda-developers.com/showthread.php?t=359458
IF YOU GET STUCK GO HERE
http://forum.xda-developers.com/showthread.php?t=455859
Mind you, Schaps is a very old rom now, go to the wm06 part of this forum to find roms that are more current.
It may be old but it still works great.
It might be old but i like it. It doesn't hang and all my 3rd party apps work flawlessly even TOMTOM 7.
What ROM would you suggest?
At the moment I'm using REVROM Lite. I changed the flash screens though as I like some others better. I also use Tomtom 7 though I have it installed on my sd card and just send a shortcut to windows startmenu folder. Have no probs whatsoever.
Its really fast and seems to be stable with me NOT having to soft reset at all for the last 2 days... You gotta admit thats pretty decent performance, I've also had no HR's or freezes. Could just be I've finally found the rom and setup that is good for me...
Cheers...
Yeh, i hear ya. I actually flashed two other ROMS on my phone tonight just to see what they were like, but i'm going back to schaps. It was stable and it seemed to give good battery life. I have all my 3rd party apps installed to my 8GB SD card to save space on my phone. Seems to work for me. Thanks for your input. Two heads are better than one unless one of them is a goathead. LOL Anyway thanks again.
Have been having similar problems upgrading my HTC TyTN from its official WM5 to the Official release of WM6. Every ROmor upgrade or program I have used has failed once it has switced the phone into bootloader mode even using Hard-SPL. Ive being crazy trying to find a solution. Hasnt help that Ive had enough trouble getting started thanks to using Vista-64bit and its driver signing problems. I have since sorted that problem and am now not getting any further with flashing the ROM.
I wouldnt class my self as an expert but I also would consider myself a novice as I build PC's and have flashed both my Xbox 360 and my PSP so am used to working in the shady underworld.
Vista Home premium
Ok here's what i've found with vista. I run AVG anti virus and spybot search and destroy on my laptop. When i use my laptop to flash a rom to my phone i have to turn both off. Even then when i flashed to the OEM cingular rom i had to put my phone in bootloader for it to flash. If i let the program put it into bootloader it wouldn't work. Now, when i flashed to shcaps and my preferred radio rom it worked fine as long as advanced network funtionality WAS checked. Before i found these fixes though i used the SD flash method which is in my opinion the best way to go since it is so simple. That is the way i flashed my Axim X51V so i was familiar with that method, i just had to figure out the correct procedure for the phone.
This is from the post that explains SD flash.
1. download hardspl v7 from the first post.
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done
Good luck
OH and if you need the official Cingular WM6 ROM you can download it here.
If you have Hard SPL installed ignore the steps using SSPL.exe as that is Soft SPL. It's not as safe as Hard SPL.
Cheers...
PS. make sure you use a 2Gb or less sd card as the bootloader won't recognise sdhc cards, format FAT32 (most cards are default formatted FAT) & make sure of your spelling as it won't work otherwise - hermimg.nbh.
thank´s you all for help me upgrade HTC TYNT
I am sure some of you are going to read this and shake your head but I need to know what is the whole purpose of updating your ROM on your phone. I currently have a US Cellular PPC 6800 and US Cellular never has anything on their site for new and cool things for their phones. I would like to update the phone to Windows 6.1 not for any particular reason just to say I did it. Is their certain features on this phone that I am missing out on because I have a stock ROM? By upgrading my ROM what features will I be able to get or do?
Thanks for your answers.
speed, speed, more speed, memory tweaks, battery tweaks
Really. I like that. I will start reading threads and getting a better understanding of this whole ROM upgrade. Any particular ROM that someone can suggest so I can read more on it. Anyone have any good words of wisdom on things to do or avoid?
what do you like in your roms? with programs? or barebones?
See that is what I need to learn yet. The differences in the ROM's. But I would have to say I like programs.
then r4r reloaded is the way to go by scrosler or bitserve. to unlock use nuespl
I see that nueSPL-2.47 is the latest version and I assume that would be the version I would use. it says "DO NOT USE with a NON GPS RADIO (2.xx). Only use with GPS RADIOS (3.xx). A version check will be added soon." How can I verify this?
What is the actual purpose of the nueSPL?
I don't mind getting my hands dirty and doing some reading but I am very new to the whole world of upgrading my phone. The fear is if I do something wrong then I have a very expensive piece of junk. I have worked on UNIX machines for the last 15 years so if this was a computer no problems but like I said earlier I know nothing about phones.
Thanks for your help
have you decided on a rom? kitchen or RUU file? let me know which one, then, ill help you unlock and install your rom
I am still researching the best one, or the one I think I would like to try. Thanks for your help and I will get back to you when I think I fully understand.
ok, this is what I believe to be true. a ROM and RUU are pretty much the same and a kitchen allows you to pick and choose which apps you want to install. What I am looking for is a way to allow me to have more features for the phone (ie. turn on GPS and upgrade to WM6.1) but yet also have some of the same programs I use all the time or be able to install the programs I use ( Office, Opera, Calendar, ) Things like that. Since you have way more knowledge on this then I do, with what I mentioned what would you suggest?
go here http://forum.xda-developers.com/showthread.php?t=444342
then go into scrosler website and download the LOADED EDITION
have two things ready
1 nuespl (to unlock)
1 loaded edition rom (win6.1 GPS)
do you have a sdcard? what size?
GeLopez said:
go here http://forum.xda-developers.com/showthread.php?t=444342
then go into scrosler website and download the LOADED EDITION
have two things ready
1 nuespl (to unlock)
1 loaded edition rom (win6.1 GPS)
do you have a sdcard? what size?
Click to expand...
Click to collapse
You will also need an updated radio, I recommend 3.42.40 or 3.42.50.
You have to do SPL first, then radio, then rom.
BTC
I do not have a spare SD Card I am going to buy one and I have read that I need 1 no more then 2GB and to format it as FAT16
ok, I have downloaded Radio ROM 3.42.50, R4RLoaded, going to get SD NueSPL, and 2GB SD Card.
jskoland said:
I do not have a spare SD Card I am going to buy one and I have read that I need 1 no more then 2GB and to format it as FAT16
Click to expand...
Click to collapse
might want to make that fat32
nuespl will format the card as fat 32 once we get it running
ok I am ready to go, I have an extra 1GB microSD card, After some reading, I am going to copy nueSPL to my phone with ActiveSync, SPL will format the 1GB card and then the unlock process will begin, After that I will install the ROM ( I need to re-read that because I forgot how to do it) and then after the ROM install the RADIO using the SD card method.
jskoland said:
ok I am ready to go, I have an extra 1GB microSD card, After some reading, I am going to copy nueSPL to my phone with ActiveSync, SPL will format the 1GB card and then the unlock process will begin, After that I will install the ROM ( I need to re-read that because I forgot how to do it) and then after the ROM install the RADIO using the SD card method.
Click to expand...
Click to collapse
ill help you with the installation because its quite simple
once you get it unlock
rename your rom (ruu_signed.nbh) to TITAimg.nbh
copy TITAimg.nbh to storage card (using whatever activesync or card reader)
put phone in tri-color screen (in case you dont know it's power+camera+reset hold for 2 seconds)
that will install your rom.
the steps for upgrading the radio are the same:
delete previous titaimg.nbh file and replace it with your radio (titaimg.nbh) file
tricolor screen
done
Ok thanks for you help. going to try my very first ROM upgrade right now
jskoland said:
Ok thanks for you help. going to try my very first ROM upgrade right now
Click to expand...
Click to collapse
go for it. ill keep my eyes on this thread
and my ears up for screaming
Can some one know how can I get windows 6.1 for my dopod 838pro and installation procedure. I saw some preview from youtube that it will work like htc touch pro or touch diamond. http://www.youtube.com/watch?v=PsSNzYftjZs
OK, look at the top bar, You should see a word that looks like this - "Search". Click on it, type in a request making sure to specify the hermes. Wow, answers galore....
Sorry I tried my level best but I can't find any wm 6.1 for my dopod 838pro. Can you plz give me any direct download link in english version. My present rom
ROM: 3.54.707.3 (07/05/07)
Radio: 1.47.00.10
Protocol: 32.80.7020.20H
Try the WM06 part of the forum, I believe heres a sticky with a heap of cooked roms and the new WM6.5 in production on various posts....
At least tell us you Hard SPLed your Hermes, look here - http://forum.xda-developers.com/showthread.php?t=296722
You need to do this BEFORE upgrading the rom. You need Hard SPL V7.
I got problem to instal spl v7. When trying to update it after a certain next, the display gone multi color and it says that connection is no longer exist. when I check spl on my device it shows spl 2.03. I am using vista home. What to do. Sorry for bother you again.
Go to page 116,post 1160 of thread I gave you. It tells you how to install Hard SPL with the sd card.
Just remember, the sd card MUST be 2Gb or less, it has to formatted FAT32 and the spelling of hermimg.nbh is VERY important.
Cheers...
Thanks bro fainally I made it.
I still can't find the wm6.1 upgrade page. I tried HardSPL 7, it finishes in an instance, how do i check whether i have HardSPL it?
And where do i find the update for 6.1? I'm pretty new to all this, so I am kinda blur and lost now~
@ultramag69 i tried Hard-SPL-V7 with the help of this instruction http://forum.xda-developers.com/showthread.php?t=296722&page=116 and mobile said update in progress bfor half an hour and still its in progress it ill complete or is it in problem can i remove battery?....................
still update in progress more than 45 mins is this complete can i remove battery anyone pls help me..........
after one hour its in progress so i removed battery now mobile not power up not enter in to boot mode any solution? any one pls help me.................
Just Did my phone for the first time
Go to this link first and make sure your phone has the latest version installed.
http://forum.xda-developers.com/showthread.php?t=296722
Follow the sets it's easy enough
After you soft reset your phone
That being done you'r now ready to flash a new rom there are plenty on the hermes windows mobile 6 thread
http://forum.xda-developers.com/forumdisplay.php?f=355
I found this rom to be the most like the one on the u-tube video
http://forum.xda-developers.com/showthread.php?t=461490
Down load the rom, extract the files
rename the ruu_sgned file to "Hermimg"
Now put a micro SD memory card in a card reader
open my computer right click the drive that represents the memory card and format it
choose the fat 32 file system.
now copy the hermimg fie to the root of the card
soft boot your phone
press the power button to comfirm the rom update and watch the progress bar
when complete
reset your phone and the new software will install
if you get a new soft ware installed do you want to reset pick no
the phone will reset when all the software is installed.
great stuff
try a few rom
find the one you like best
sry but you will need to put that card in your phone after you copy hermimg onto it
maybe you should go to the how to unbrick my phone thread
didn,t see that last post
ouch!!
here's the best chance at I solution
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Go here
I hope you find an answer