ok so i got my unlock code and can access my settings, im switching my current phone to a mogul, what is my next step? enter in the settings? what do i need to change? it seems my metro esn is like 19 caracters how do i input that into the mogul? please help im killing my self trying to figure this out! thanks in advance!
Related
hi i used Buzz's WM2005 rom and didnt change the operator value cause i dont know what it does and i don't know what to set it to
im in australia and with telstra communicate prepaid, but i cant seem to connect after upgrading, what should i do, is it indeed the operator value i need to change, the only error i get once it's booted is that it wont connect to my network, and when it's _booting up_ it says NO GSM next to rom ver.
what do i do?
sorry guys i couldnt find much info to directly help me, any help would be appreciated
Also, i have a huge other prob, i put a lock on my phole and then i switched it to landscape mode
then it turned off cos i went to the toilet, i came back, turned it on and it had the promt to enter the ping/ password (numerical in this case) and it wont let me put in/ it wont let me input numbers, however they are there, could this be cause due to landscape switching??
i dunno im freakin out, cos i re-upgraded and the pin/ pass is still there :S
HELP~!!!
Hey all, I'm fairly new to cdma flashing but I jumped in head first after reading what I could. I successfully flashed, but i have two questions... skip to ** for the question.
I have a 6800 through a local carrier (Appalachian Wireless) and since I wasn't concerned if I messed the phone up I decided to flash it. I unlocked it, updated the bootloader to 2.40 and flashed it with the 3.56_3.42 sprint rom. I screwed up by not viewing my settings with EPST before the flash and I didn't stop the customization before it started. So after the flash my phone wouldn't make calls, but I got into EPST and changed my MSID back two my number and then the phone would make calls and send text. After that I flashed again with dcd 3.2.0 to get rid of the sprint rom.
**Now My data connection won't work, even after creating a new connection (#777 and I know the username and password for the data netowrk). Are there some settings in the EPST that I need to change back? Any suggestions on other fixes?
**I'm also not sure what carrier cab to use since my carrier isn't available to choose from. I have to use a cab to access EPST but I was wondering if there is a recommend cab to use for those of us whose carrier isn't available.
Reprovisioning Sprint Data Services
Start ---> Settings ---> Phone ---> Services Tab ---> Select "Internet" ---> Get Settings Button ---> Start
This will start the "Client Initiated IOTA" (Internet Over The Air) data Provisioning.
Let it run. It will download your settings from Sprint.
You may need to reboot afterwards.
Enjoy.
bradtrump said:
Start ---> Settings ---> Phone ---> Services Tab ---> Select "Internet" ---> Get Settings Button ---> Start
This will start the "Client Initiated IOTA" (Internet Over The Air) data Provisioning.
Let it run. It will download your settings from Sprint.
You may need to reboot afterwards.
Enjoy.
Click to expand...
Click to collapse
Brad - He's not on Sprint.... may I suggest you call you provider and tell them you had to do a hard reset and that you lost your settings in the process.... they should be able to tell you the EPST settings....
does your carrier require username and password for the #777 connection?
better yet, do you know anyone else with the phone? it would be nice to get a ROM dump from one that has not been flashed. if not, I can make a generic carrier cab.
as always... DCD very wise in the ways of the ppc.
Hey guys, thanks for the help. I managed to fix the data. First off, I just went with the Verizon cab. But to fix the data I found a guy at work who has the same phone (untouched) and got into his epst and copied all the settings one by one to my phone. Only remaining problem is my PRI is the sprint pri and my prl won't seem to update even after multiple *228 attempts. Its staying at 10000.
dcd1182 said:
does your carrier require username and password for the #777 connection?
better yet, do you know anyone else with the phone? it would be nice to get a ROM dump from one that has not been flashed. if not, I can make a generic carrier cab.
Click to expand...
Click to collapse
What do I need to do to get a ROM dump, I'd like to be able to add my carrier to your cab list. Let me know and I'll get what ya need!
Could you tell me what do you need to or how can I create a MetroPCS Carrier cab file?
Thank you very much.
MetroPCS doesn't have this phone. But I suppose all the information you need is right here:
http://www.howardforums.com/showpost.php?p=11879204&postcount=3
There is an explanation for the WEB connection settings and the MMS settings on ArcSoft.
Thanks again.-
dcd
how to you go about getting a rom dump? I am wanting to test with my Cellular South phone and would like to have a stock dump prior to loading anything else.
THANKS!
dcd1182 said:
does your carrier require username and password for the #777 connection?
better yet, do you know anyone else with the phone? it would be nice to get a ROM dump from one that has not been flashed. if not, I can make a generic carrier cab.
Click to expand...
Click to collapse
Well i have successfully unlocked and flashed to mighty ROM 6 but my Phone can not connect to the net using data i have searched all day for a good post on how to fix and maybe i am just slow or it isnt there anyway any help would bet greatly appreciated
i am getting error 67 and #777 will not connect
please and thank you
j
Did you put the right data settings in when programming (nam, etc) and are you sure they didn't revert? Mightyrom would change mine to @something.cn
That i am not sure of any help would be appreciated.
I was able to do my vogue to boost no problems this is driving me crazy lol
thanks for all help
What does it say when you :
##778#
Settings > system > update prl
##778#
What does it say when you :
##778#
It goes to view edit cancel then it wants an unlock code
UPDATE!!
Flashed back to sprint update prl then Viola everything works!!!
thanks all
Hey..After getting my esn added I can't seem to get the apn settings to stick.I do have talk & text but no internet whatsoever.I would really appreciate some help if somebody is willing to lend a helping hand..Thanks
Seems like there's no one with a photon on metro
I am also on Metro with text,talk,3G. But no MMS yet (I don't use it as much anyway).
Follow this link see if you can get your 3G to work.
http://forum.xda-developers.com/showthread.php?p=8395950#post8395950
There are differences in getting Photon to work with 3G. So some of the steps indicated in the above link are different. And I assume that you know how to get your MSL number. Here are the differences:
1. You don't need HTC diag drivers. This should be Motorola driver.
2. In order to get to diag mode. You need to boot into boot loader and choose BP tools
3. You will need to get QPST_2.7_366
4. Once you got everything:
follow step 9 - 28. However at step 22, instead of choosing "Simple IP", you want to choose "MOB+Simple IP". Otherwise 3G will not work.
Once done you should have 3G. However there is an annoying error Mobile IP Registration will be in your notification (ignore this, it does not matter).
Finally!!! I got it to work.I wasn't changing the spc code that's why it was giving me a problem.Thanks man & as soon as I figure out this mms thing imma let u know
Have you been able to get mms? if so, will you explaing how? thanks...
eltano07 said:
Have you been able to get mms? if so, will you explaing how? thanks...
Click to expand...
Click to collapse
Are you on a custom rom?
I have mms working fine sending and receiving on AOKPCB
GhostxLawliet said:
Are you on a custom rom?
I have mms working fine sending and receiving on AOKPCB
Click to expand...
Click to collapse
Can you please help me a little more about that...how to get the custom rom you mentioned for example, also how to install it would me helpfull...will I loose all my info when doing it? THANKS IN ADVANCE...
eltano07 said:
Can you please help me a little more about that...how to get the custom rom you mentioned for example, also how to install it would me helpfull...will I loose all my info when doing it? THANKS IN ADVANCE...
Click to expand...
Click to collapse
I pm'd you
I'm having trouble programming the phone.I started up my phone in bp tools but my phone doesnt seem to show up.
Is there certain drivers im suppose to install? i used the drivers from the main site because i couldn't find any other place to dl the drivers.
Are you on a gingerbread ROM ? If not then you should be.Double check your drivers & see if the phone pops up under ports in device manager.Once it shows up & gives you a port number then its a go.QPST & CDMA workshop is all you need
Im currently running cm7 and its on 2.3.7
In ports i see motorola QC Diag Port (COM8)
When i connect to COM8 with cdma workshop it becomes unresponsive (crash?)
connecting through qpst i see COM8 also but it reads as no phone.
Also thank you for your help so far!
U need to be on a blur ROM or else CDMA WS is gonna be unresponsive.Use rocko rom or any blur rom then retry
My mopho doesnt seem to pick up on metropcs i did the above and had my esn added to metro
not sure what went wrong.
EDIT: i got my internet working through dfs using the provision settings up top but my phone calls and text aren't sending/recieving
any luck with mms with aokp 4.0?
I've tried T-mobile's APN and called metro for theirs still no luck.... all it says is no service and that "Sim card is not verizon." Not sure what im doing wrong. Set to global and LTE/GSM tried APN in both setting with reboot. Nothing....
It's stock 5.0.1 no root. Everyone says they have theirs working but the thing is i cant even get the service to start. Where am i going wrong here? Thank you in advance for any help.
Did you call MetroPCS and provide your IMEI?
phice said:
Did you call MetroPCS and provide your IMEI?
Click to expand...
Click to collapse
No i didnt. I'm guessing thats required?
If thats the case i'll feel really dumb. I'm new to unlocking, not my strong point.
MetroPCS requires it... not sure about other carriers.
Uzzyman18147 said:
I've tried T-mobile's APN and called metro for theirs still no luck.... all it says is no service and that "Sim card is not verizon." Not sure what im doing wrong. Set to global and LTE/GSM tried APN in both setting with reboot. Nothing....
It's stock 5.0.1 no root. Everyone says they have theirs working but the thing is i cant even get the service to start. Where am i going wrong here? Thank you in advance for any help.
Click to expand...
Click to collapse
you need to sim unlock your device I'm not sure that needed to be said but its kind of obvious... after sim unlocking you can easily enter in the metropcs-fast.metropcs.com or tmobile apn settings with any of my ROMs and get a signal. I know because thats my setup as well. i know their supposed to be factory unlocked or whatever but for me to rid myself of that sim error I had to call VZW and get the actual unlock code for the device and enter it in the old fashioned way. they are supposed to or will guide you if you call in and the phone is paid in full. then yes register the imei number and your metro sim card number with metro which takes maybe 5 min and you're set.