I cook a rom with ppckitchen and now i cant get my internal gps to work. It was working before. I have searched and tried many things but to no avail. Any ideas or sugestions on how to get it back working...thanks...
tjridings said:
I cook a rom with ppckitchen and now i cant get my internal gps to work. It was working before. I have searched and tried many things but to no avail. Any ideas or sugestions on how to get it back working...thanks...
Click to expand...
Click to collapse
You may want to start at PPCKitchen.org. They support the kitchen there.
scrosler said:
You may want to start at PPCKitchen.org. They support the kitchen there.
Click to expand...
Click to collapse
Double check your location settings. Some roms change this value after flashing.
BTC
Related
I went through many posts on this and it seems other people have the same issue yet no one has replied to them with a solution...
While experimenting on Korands 2.5 & 2.6 roms (btw great work!), everything goes well until i need to "dump xip". When i run this i get the following error:
Xip2.bin: No such file or directory
...and after that no files are copied and i can't go further than that to build the ROM.
1. What is the cause behind this?
2. Does this, for some reason, only happen to certain ROMs
3. More importantly...solution?
Appreciate all the help!
Suggest you cook a factory ROM first and get the hang of it before cooking a cooked ROM. Some cooked ROM's will take an expert to recook by deleting some info to make itself smaller.
jychan28 said:
Suggest you cook a factory ROM first and get the hang of it before cooking a cooked ROM. Some cooked ROM's will take an expert to recook by deleting some info to make itself smaller.
Click to expand...
Click to collapse
Thanks for the reply, would you know where i can find the latest factory roms for Prophet?
Thanks again!
Alan
sorry, thread flush only~~
I am a new and aspiring chef here and would like to cook a custom ROM for myself using DCD's latest Kitchen. I have been looking around at all the postings but don't see any specifically relating to using DCD's kitchen. If someone could put together a little step by step tutorial on how to do this I think it would be very helpful for a lot of us. DCD, your roms rock but I just want to cook in some of my own personal favorite things. Thanks for everyones help in advance!
760hacker said:
I am a new and aspiring chef here and would like to cook a custom ROM for myself using DCD's latest Kitchen. I have been looking around at all the postings but don't see any specifically relating to using DCD's kitchen. If someone could put together a little step by step tutorial on how to do this I think it would be very helpful for a lot of us. DCD, your roms rock but I just want to cook in some of my own personal favorite things. Thanks for everyones help in advance!
Click to expand...
Click to collapse
what do you mean personal things like programs or other stuff
Dc_striker said:
what do you mean personal things like programs or other stuff
Click to expand...
Click to collapse
Ha ha ha, programs. I know there are others who use his ROM as a base for their own custom roms. I want to cook my own rom with his latest kitchen plus a few other OEM's like slingplayer, wmwifirouter, etc. someone please give me some help here. I am sure that I am not the only person who will make good use of this information.
760hacker said:
I am a new and aspiring chef here and would like to cook a custom ROM for myself using DCD's latest Kitchen. I have been looking around at all the postings but don't see any specifically relating to using DCD's kitchen. If someone could put together a little step by step tutorial on how to do this I think it would be very helpful for a lot of us. DCD, your roms rock but I just want to cook in some of my own personal favorite things. Thanks for everyones help in advance!
Click to expand...
Click to collapse
Bump anyone wanna help here?
how much simpler can it get? download the kitchen click BuildNB.bat pick your options hit the play button and load it. what are you missing?
are you sure you read his thread? everything is in the first pages.
98classic said:
how much simpler can it get? download the kitchen click BuildNB.bat pick your options hit the play button and load it. what are you missing?
are you sure you read his thread? everything is in the first pages.
Click to expand...
Click to collapse
I read it but it is possible I missed something. I just want to be sure I get it right and don't brick my phone.
In order to add your own OEMS, simply copy them into the OEM directory and they will then show up when you run BuildOS.
Slingplayer works fine in my unit cooked off DCD's kitchen.
I am most recently looking into the UC compatibility to automatically customize a rom without having to cook it.
How do I prepare cab files for insertion into the OEM directory?
you have to get oemizer. google it/search button at top
paynej said:
In order to add your own OEMS, simply copy them into the OEM directory and they will then show up when you run BuildOS.
Slingplayer works fine in my unit cooked off DCD's kitchen.
I am most recently looking into the UC compatibility to automatically customize a rom without having to cook it.
Click to expand...
Click to collapse
Could you hook me up with your slingplayer oem files? I can't find them anywhere and tried oemizer to no end!
I want to use DCD's new 3.0 kitchen, but I would rather use the new 3.5 OEM ROM as a base, because I would rather use WM 6.0 than 6.1
Can anyone tell me what I need to do to do this? Do I need to extract something from the OEM ROM and place it in a certain folder in his kitchen, or can I just place the OEM .nbh file somewhere?
Any help would be greatly appreciated, even if it's just to another thread with more detailed information about cooking ROM's.
Hello everyone can someone give me a link to a cab file or qwest ROM so that I can flash that since my EPST is not working. Someone said in the RELOADED thread that the qwest cab file will help me access that.
That would be greatly appreciated...
Thanks.
Did a search and gives a lot of ROM stuff, but don't want to flash the whole ROM, just need the cab file. I hope that made sense since I'm still a noob at this.
tosh1 said:
Hello everyone can someone give me a link to a cab file or qwest ROM so that I can flash that since my EPST is not working. Someone said in the RELOADED thread that the qwest cab file will help me access that.
That would be greatly appreciated...
Thanks.
Did a search and gives a lot of ROM stuff, but don't want to flash the whole ROM, just need the cab file. I hope that made sense since I'm still a noob at this.
Click to expand...
Click to collapse
Are you looking for the carrier cab? and what rom r u running because if you are running reload the carrier cab is on the device
1.3.4 . Install scott rom pack under my documents and it will be under my document\scott rom pack\carriers
If you r running beta it is already under my documents\carrier cabs
I just checked your other post and you already have the carrier cab that you need. Which rom version do you have? 1.3.4 or beta?
either way here is a link to dcd carriers
http://dcd1182.n715dp.com/index.php?dir=carriers/
Thanks for the reply...
I just looked and the ROM is 1.3.4
ROM date: 8/22/08
Radio Version: 3.35.04
Protocol version: DCAAXAM-4350H
But it still would not let me get into EPST for some reason. I will install that cab file and see what happens.
Thanks for the links....
In the 1.3.4 if you open file explorer and look in my device\my documents there is scott rom pack. Install it.
Open file explorer again and under my device\my documents\scott rom pack\carriers here is the carrier cabs just install quest carrier.
Or you can use the cab in the link
tosh1 said:
Hello everyone can someone give me a link to a cab file or qwest ROM so that I can flash that since my EPST is not working. Someone said in the RELOADED thread that the qwest cab file will help me access that.
That would be greatly appreciated...
Thanks.
Did a search and gives a lot of ROM stuff, but don't want to flash the whole ROM, just need the cab file. I hope that made sense since I'm still a noob at this.
Click to expand...
Click to collapse
I hope you are good to go now.
Your welcome
81344songz said:
I hope you are good to go now.
Your welcome
Click to expand...
Click to collapse
Same from me.
Is all good?
Hey Matt!!!
Thanks buddy..
appreciate the help. It did the job and was able to get internet working on the phone for METROPCS. Now I just need to install Arcsoft for MMS and test the email functions. I was reading a part of the thread on RELOADED that email didn't work for someone on Qwest cab file...
I guess I will find out...
**Bit off topic, but do you have a link for a different background for RELOADED I can load. I want a bright color for a friend of mine. He doesn't like the black because its too dark.
tosh1 said:
Hey Matt!!!
Thanks buddy... appreciate the help. It did the job and was able to get internet working on the phone for METROPCS.
Click to expand...
Click to collapse
You Bet Just remember that after you flash a rom you need to install carrier cab. (most overlooked thing)
tosh1 said:
Now I just need to install Arcsoft for MMS and test the email functions. I was reading a part of the thread on RELOADED that email didn't work for someone on Qwest cab file...
I guess I will find out...
Click to expand...
Click to collapse
81344songz is the one who originally told you to install carrier cab. He is also on metropcs. If you have problems he can assist you with their service info.
tosh1 said:
**Bit off topic, but do you have a link for a different background for RELOADED I can load. I want a bright color for a friend of mine. He doesn't like the black because its too dark.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=451702&highlight=manilla+2d+skins
Here is one link. Just do a search for manilla 2d skins. There are alot of themes avail.
Also if you run m2dc under programs there are I think about 12 themes to try.
Although you will find different gliches in some themes.
As for background image it can be change also under m2dc. has to be 320 x 240 .png file
I use a program called gimp to resize pictures and save with different extensions.
Thanks to you too 81344songz
I didn't even know about that M2D program built into it. I will give it a shot. I just wanted something brighter....
I guess I can deal with the bugs a bit...hope its not too bad...
I have tried all connection setup cabs i found online on my t-mobile hd2 and none of them had my country's (barbados) settings...
however this package i used to cook in my leo based roms for the x1 worked every time, but for some weird reason i am having problems in cabbing them, can someone here please cab these for us t-mobile hd2 users please...
this also has every country/network
i will be making a donation to the first one posted that works
reason: t-mobile hd2 doesnt have connection setup
I should be able to do this, but right now, my WinCE Cab Manager is giving me trouble, so it'll be a few hours until I get home & can work on it there. Unless someone beats me to it. I can't test it, though, because I already have this version cooked into my ROMs.
ok thanks a lot Captain_Throwback
i too tried WinCE cab manager but there is something im not doing right... i will keep watching the thread...
Try the attached and lemme know.
I have not tested it myself for the same reason that i have already cooked in in my ROMs.
i need latest connection setup cab , am also using tmous stock rom and i need latest rom cuz all cabs are old arround some can set internet connection but nothing can setup mms connection
regards
Thanks raj Kumar
Try this : http://www.4shared.com/file/iKEv-WJk/ConnectionSetup_3_1_20111826_0.html
skr_xd said:
Try the attached and lemme know.
I have not tested it myself for the same reason that i have already cooked in in my ROMs.
Click to expand...
Click to collapse
thnks dude, it works, only one problem is that a shortcut is placed on the default start menu, but i will edit the cab and remove it will make the donation
laurenti said:
Try this : http://www.4shared.com/file/iKEv-WJk/ConnectionSetup_3_1_20111826_0.html
Click to expand...
Click to collapse
thanks dude, i will test this after returning home, i still will donate to you if it works too, .... thanks guys, gotta go to the city now
spikegotti said:
thnks dude, it works, only one problem is that a shortcut is placed on the default start menu, but i will edit the cab and remove it will make the donation
Click to expand...
Click to collapse
No problem friend. I have edited the cab. You shall use it in future without shortcut issues.
Hi all,
I have been looking around for long time and trying different solutions to add Arabic (BIDI or RTL) support to my vibrant but with no luck.the only thing is just adding the font so instead of showing squares it shows the letters but disconnected and in reverse order.
Have any one been successful in porting the language support from the i9000 middle eastern rom? I tried but my phone will not boot and I don't know how to access the log at that stage to see why or what is missing.
Do we have a better built in support in froyo? Or it is the same?
I have seen many threads in many forums but most are not active for long time.
Any help will be appreciated.
Sent from my SGH-T959 using XDA App
I managed to make an arabic 2.1 rom. Everything works fine with exception of GPS. Just do not know how to create a flashable zip file for the rom to post it.
arahma said:
I managed to make an arabic 2.1 rom. Everything works fine with exception of GPS. Just do not know how to create a flashable zip file for the rom to post it.
Click to expand...
Click to collapse
How did you do it?
Where did you get the files from? or you compiled your own?
Is it working now right-to-left and reshaping?
I would appreciate your help.
I am running now BIONIX1.6 rom (based on T959UVJI6). what is yours?
I have made a nandroid backup file. I can put it in online.
arahma said:
I have made a nandroid backup file. I can put it in online.
Click to expand...
Click to collapse
Please do i would greatly appreciate it ill even try to make an update from it. My friend would call you a life saver
i need hebrew support for this device 2 im using bionix 1.7 there is a script for fixing the framework.jar but after use with it the phone wont load the homescreen
arahma said:
I have made a nandroid backup file. I can put it in online.
Click to expand...
Click to collapse
That will be awesome, but would you also provide more details about what ROM you are running and what have you done and where did get the update files from.
oror494 said:
i need hebrew support for this device 2 im using bionix 1.7 there is a script for fixing the framework.jar but after use with it the phone wont load the homescreen
Click to expand...
Click to collapse
Can you provide us with that script or show where to get it from? maybe we can update it to work with the new rom.
There is an update rom running froyo 2.2 for Orange (I9000JHJP4) and has support for Arabic and hebrew, i tried to get some files from it to my 2.1 but did not work, i know i am missing more files that should be also integrated. that rom is for the international Galaxy S i9000 so it might not work with Vibrant
you can find the rom at samfirmware.com
windows
http://dl.dropbox.com/u/9085803/Hebrew 0.7/hebfix_script_0.71_win.zip
mac /linux
http://dl.dropbox.com/u/9085803/Hebrew 0.6/hebfix_script_0.64.zip
credit: classicaldude
oror494 said:
windows
http://dl.dropbox.com/u/9085803/Hebrew 0.7/hebfix_script_0.71_win.zip
mac /linux
http://dl.dropbox.com/u/9085803/Hebrew 0.6/hebfix_script_0.64.zip
credit: classicaldude
Click to expand...
Click to collapse
Thanks, i will see if i can fix or update this script. By the way what happens when you run it now? do you get an error or what?
fduraibi said:
Thanks, i will see if i can fix or update this script. By the way what happens when you run it now? do you get an error or what?
Click to expand...
Click to collapse
http://www.multiupload.com/ZBK8NCMTDF
this is the log txt
oror494 said:
http://www.multiupload.com/ZBK8NCMTDF
this is the log txt
Click to expand...
Click to collapse
I tested this patch without any changes and got the same error
I am trying to understand this java disassembled code to be able to fix it for the new ROM.
The patch already cover the full range of unicode characters for hebrew and arabic + other rtl languages.
Can anyone help me with generally understanding the disassembled code or provide links to some resources that can help?
Sent from my SGH-T959 using XDA App
any luck?
.
oror494 said:
any luck?
.
Click to expand...
Click to collapse
nope
there is a lot of line reference shift and i am not sure what or where are these reference and how can i update the new code based on these values.
oror494 said:
any luck?
.
Click to expand...
Click to collapse
Look at this thread, one guy is trying the same thing and he is getting the same error, and i think he got a work around in a hebrew site which i could not understand so you might find the solution to your problem there http://iandroid.co.il/forum/topic5657.html but for me I still need the Arabic character reshaping so RTL alone is not enough
And this is the link to the XDA thread where they discuss the same issues, and it seems that they are about to integrate the BIDI solution into the AOSP and CM
http://forum.xda-developers.com/showthread.php?t=701281