If i can get a full reg dump. only the reg from HKLM..
there are missing entries in the rom I have and it will be easier for me to go though a full .reg dump then all of the rgus in a rom dump.
Hard Reset might help u?
sumitescp said:
Hard Reset might help u?
Click to expand...
Click to collapse
i have a different device. so the rom was ported before the rose was even released.
so a hard reset will only install the reg with missing entries. if i get a .reg dump of hklm i can find my missing reg entries and get all of the 740 functions on my juno
shadowmike said:
i have a different device. so the rom was ported before the rose was even released.
so a hard reset will only install the reg with missing entries. if i get a .reg dump of hklm i can find my missing reg entries and get all of the 740 functions on my juno
Click to expand...
Click to collapse
740 functions on junO? is the hardware same?
@shadowmike
I own S740. If you provide step-by-step instructions on how to perform that dump, I would post those files.
omikr0n said:
@shadowmike
I own S740. If you provide step-by-step instructions on how to perform that dump, I would post those files.
Click to expand...
Click to collapse
Thank you,
Basicly all you need is a reg editor for windows mobile, which can be found here http://ceregeditor.mdsoft.pl/ if you don't already have one.
connect your phone to your computer using active sync.
open ce reg editor and connect to your phone.
the reg keys will be displayed in the left pane.
click HKEY_LOCAL_MACHINE, then EDIT > EXPORT, save the file
then zip the file and upload here thankyou for your help.
sumitescp said:
740 functions on junO? is the hardware same?
Click to expand...
Click to collapse
No not at all. I should have made my comment earlier more clear.
I want to get the OS functions on my phone. As the rom ported has alot of stuff removed. Like audiomanager homescreen plugin, htc email homescreen plugin, etc, etc. but we do have everything else from your phone on ours. like phonecanvas 2g.. thankyou
but obviously features like GPS and other hardware features that arnt on the OMAP850 will not work. But like i said, we have your rom on our device so put yours and mine next to eachother your just going to see a diffrent case
Here it is. I removed certain parts with personal information (I hope I haven't forgotten any).
omikr0n said:
Here it is. I removed certain parts with personal information (I hope I haven't forgotten any).
Click to expand...
Click to collapse
Cool thank you. and dont worry about info. I have to much of a reputation at allshadow.com as the number 1 user and moderator to try and mess with somones personal info like a criminal.
like i said all i want to do is get all the homescreen plugins working correctly .. thankyou for your help. if you need anything just ask. you can run manila 2d on your phone. you can check my instructions in the juno section or over at allshadow.com
edit... nvm im dumb i wasnt thinking this was going to be a dump of a used phone. i should have....
but i now realize what you ment by removing personal info. I can use this. and none of your info was in my way thank you again.
Question. for you guys. does the htc favorites homescreen plugin update automaticly or are they preset ?
@shadowmike
As far as I'm concerned the HTC Favorites plugin is a live display of the IE favorites. But I am not entirely certain about that since I don't have a S740.
shadowmike said:
Question. for you guys. does the htc favorites homescreen plugin update automaticly or are they preset ?
Click to expand...
Click to collapse
I don't use it and have it disabled on my (altered) sliding panels home screen, but I have just tried it and it seems to update automatically.
It has a bug, however. When I bookmarked new site, it was added to the panel, but panel page with that site lacked headline "Internet explorer", IE icon and right soft key functionality.
omikr0n said:
I don't use it and have it disabled on my (altered) sliding panels home screen, but I have just tried it and it seems to update automatically.
It has a bug, however. When I bookmarked new site, it was added to the panel, but panel page with that site lacked headline "Internet explorer", IE icon and right soft key functionality.
Click to expand...
Click to collapse
hmm thnks for the info. ill have to look into the reg alittle mor closely and see how it has everything updated automaticly.
Related
I have been working with TDial Designer and have had difficulties after 3.0.4 getting the dialer skin to look the same. Maybe someone else has overcome this problem and could give me some guidance. Here's what I have done.
Before, I was able to select BlueFrog dialer in TDial and have the keys skin to look like the screenshot20.jpg below (you can see the background transparent). Now with the recent DCD ROMs it looks like screenshot2.jpg thumbnail below where the keys remain black though the background is there for the process.
I have tried both the Old Vogue (Touch) and the New Vogue (BlueFrog) options in TDial and neither work. I have included the cabs for those if you want to test them on your phone.
I install the Kitchen using DCDs option for the new Vogue dialer checked (no OEMs replaced) and although it looks the same before I try to install the cab, it doesn't work like it used to.
I would be glad to replace the OEM with the one from 3.0.4, but I know DCD has been doing some upgrading to the functionality of the dialer and don't want to break some of the work that he has been doing (I like new and shiny stuff).
Thanks!
P.S. Disregard the top and bottom bars as one of them was using WisBar.
I don't use any third party dialers. If you have all the png files (for each number, function etc) you can simply copy them to \Windows.
gc14 said:
I don't use any third party dialers. If you have all the png files (for each number, function etc) you can simply copy them to \Windows.
Click to expand...
Click to collapse
I guess I could do that, do you copy manually or using UC?
If you use UC do you do it with XML or by copying the whole folder?
I do it via UC, but with a cab file I made. I don't use XML anymore with UC, I've cabbed everything. If you zip up all the files and post it, I'll make a cab for you.
gc14 said:
I do it via UC, but with a cab file I made. I don't use XML anymore with UC, I've cabbed everything. If you zip up all the files and post it, I'll make a cab for you.
Click to expand...
Click to collapse
Here ya go.
I used the TDial export to give to you, but I am not sure which you will need (old vogue or new). Let me know if this works or if you need something else.
REQUEST: If you are up to making another of your amazing wikis, I think a tutorial on how to make cabs for xml and file importing/copying (like this dialer for example) would be HIGHLY used and appreciated. I would definitely buy you some beer for that one (I may even take Boston Celtics as my new fav BB team).
Here you go.
If I have time, maybe I'll do a wiki.
gc14 said:
Here you go.
If I have time, maybe I'll do a wiki.
Click to expand...
Click to collapse
That would be something that would be used across the board, and may be as widely referenced as any other out there. Plus it would be valuable for anyone with WM, not just Titans. Better that it be done by a Bostonian
Thank you very, very much. I will try to take this one apart and figure out what you did.
Did it work?
gc14 said:
Did it work?
Click to expand...
Click to collapse
Yes, thank you so very much for making that.
With the re-release of 3.2.2 I was scrambling to get updated before I left work and just got a chance to sit down now to thank you. It works perfectly and will look at a few cab programs to figure out how you did it.
Is there a way that the phone popup reg entry could be affected by this cab? I have had that problem with my TDial dialers, and still needed to after this too. I wonder if some other cab I am installing has this key change as I assume you just copied the pictures I sent you to the windows dir. I will have to do some investigation to find where I am getting that change as DCD PM'd me and let me know that my bug was only on my side and not in his kitchen when it happened before your cab.
You are the man GC, I will buy you some beer next week when paychecks come in.
hello everybody
I found a recent version VGA but I converted to QVGA, you certainly know this software, this version is unlike other tactile versions available to date
Admin edit: software removed after a complaint from the copyright owner, this software is not freeware or shareware and therefore considered warez, warez is not allowed on the forum.
Quentin Post:
I know, I know...I'm late to the party. Hopefully the quality of the release will make up for the tardiness. I'm still running a Kaiser (just couldn't convince myself the Diamond was actually better--and I'm still crossing my fingers that the Touch HD will get released with TMO 1700Mhz support).
Anyway, without further ado...this version of MusicID is based from the 1.3.16 source from 1800pocketpc.com which is of course released by AT&T. The changes are as follows:
Converted for QVGA (320x240) support. The conversion was done using image resources from the non-touch screen version so they look just fine. Furthermore all fonts have been converted as well. (I'd like to give credit to lepsyfou here, he did give everyone something to use at least even though the images looked poor and the fonts were large. Were it not for finding his original conversion that got me hooked on the app itself I probably never would have made my own conversion).
Removed UID information from query strings. For those that didn't check, the application for download on these forums (and other sites) actually makes all requests under the guise of someone's account (presumably whoever released the app). I won't post their account # here but suffice it to say that if they ever shut off the service everyone using that app would find it stops working. Hopefully that won't happen here.
Removed all AT&T specific features. This also means that all the buttons present after a successful identification have been removed. #1 they are completely useless for anyone not on the AT&T network; and #2 they were pretty much pointless (from my perspective) in the first place. As a side benefit see the next item.
Due to the removal of AT&T specific features I found it convenient to download a larger cover image photo for the album...maybe this will be enjoyed by others as well
Updated the help pages and removed redundant (or now unused) entries.
INSTALLATION INSTRUCTIONS
If you've never installed any version of MusicID before simply install the cab. If however you have installed a previous version pay close attention:
Remove any previously installed version of MusicID.
It is absolutely MANDATORY to remove the HKEY_LOCAL_MACHINE\Software\MusicID folder and its contents. If you're an advanced user and are using any of the conn* entries you can leave those but remove all others. If that last statement doesn't make any sense to you then simply remove the entire MusicID key (and all entries contained therein) prior to installation.
I highly recommend removing your \Application Data\MusicID folder and contents. This is due to the fact that the application now expects 150x* size images. The only issue with old images should be a slight off-center display though so it is up to you
Click to expand...
Click to collapse
enjoy
Update add VGA version
Update Shortcut fix QVGA
Update fix problème font QVGA
thanks and crédit are Quentin QVGA Fix
lepsyfou said:
hello everybody
I found a recent version VGA but I converted to QVGA, you certainly know this software, this version is unlike other tactile versions available to date
enjoy
Click to expand...
Click to collapse
Thanks for this. Been looking for an update since moving to the Diamond. Whats involved in migrating to QVGA? Is it an easy process? There are some other apps which would benefit from rework...Skyfire for one!
Cheers
Aidan
thanks for your work on this lepsyfou!!
wouldnt install. says installation unsuccessful because it is not digitally signed with...............
I have édit cab fr and eng: signature exe it"s good now installation functionnel
yes I will convert a fun software VGA>> QVGA so that everyone can benefit
Great soft thank bro
kwill said:
thanks for your work on this lepsyfou!!
wouldnt install. says installation unsuccessful because it is not digitally signed with...............
Click to expand...
Click to collapse
Look first post I have édit cab now it's signé
imfloflo: with pleasure my brother
thanks for fixing it so quick
ajout version VGA post 1
Is there anyway you could adjust the Text size? It still doesnt all completely fit on the screen.
Deff dont want to come odd as an ass. Just a thought to make the QVGA version even better.
Thank you
acardinale said:
Is there anyway you could adjust the Text size? It still doesnt all completely fit on the screen.
Deff dont want to come odd as an ass. Just a thought to make the QVGA version even better.
Click to expand...
Click to collapse
+1 on this... expecially on the manage id's tab... help me out tab needs some work too..
thanks on this, finally a finger friendly version of this app... great work!
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
molesaied88 said:
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
Click to expand...
Click to collapse
same here.... but i used Total Commander to copy the MusicID.exe file from the program folder to the Start Menu... and vola! it worked.... was able to place it in my program launcher using Manilla 2D....
i'm sure theres a much easier way.... but hey,.... it works..
hope this helps...
molesaied88 said:
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
Click to expand...
Click to collapse
no problèm shortcut AM MusicID start menu/ program
post1
very cool, I was using the old one with no touchscreen
Thank you.
the letters are cutoff a bit though also on the id screen
No biggie thanks again
Was reading about this last night on Pocketnow.com. tried to installed and got the unsuccessful message. Was in ATT store today looking at the new Samaung epix, just to see what it was about, would never give up my Tilt for it, but is nice and love the cursor, very responsive.
Now if you have a Tilt, not sure about other cells, or maybe if you have ATT device dial from you cell *43# and it should get it for you. Also might look in your start up might get put there.
I love this program. It actutally found a song from a Musical from 1951 while i have my Sirrus on Broadway. Unreal.
Hope this helps someone.
Beachboyde
Thanks for the good work!
Lepysfou, Great work, thanks for the qvga version
beachboyde said:
Now if you have a Tilt, not sure about other cells, or maybe if you have ATT device dial from you cell *43# and it should get it for you.
Click to expand...
Click to collapse
What do you get when you dial *43#? I have a tilt with att.
Thank you very much for this lepsyfou, worked a treat.
ps i love this tool.
showaco said:
Lepysfou, Great work, thanks for the qvga version
What do you get when you dial *43#? I have a tilt with att.
Click to expand...
Click to collapse
I am really not all that sure... It said success, and the attempted connecting to media net/internet. then a lot of nothing happened...
Hey,
I am a newbie. So I have a little bit of problems on my AT&T Fuze. My uncle is a tester and I got it before it was released in the market. Now, I updated it to the ROMeOS2 v1.40 and the keyboard is messed up. It changed to the original HTC TOUCH PRO and the ATT Fuze keyboard is different. Can you help me out please.
One more question, which ROM is the best for my AT&T Fuze.
Thx,
Prateek
prateeksach said:
It changed to the original HTC TOUCH PRO and the ATT Fuze keyboard is different. Can you help me out please.
Click to expand...
Click to collapse
Unfortunately I don't know exactly but you probably need to exchange the keymap dll files with the files that come with the Fuze.
prateeksach said:
One more question, which ROM is the best for my AT&T Fuze.
Click to expand...
Click to collapse
As far as I know there are no cooked ROMs for AT&T Fuze yet. But they can probably be expected soon.
DeepThought said:
Unfortunately I don't know exactly but you probably need to exchange the keymap dll files with the files that come with the Fuze.
As far as I know there are no cooked ROMs for AT&T Fuze yet. But they can probably be expected soon.
Click to expand...
Click to collapse
Na, theres a reg setting which determines the layout. Goto HKLM\HARDWARE\DEVICEMAP\KEYBD
Change CWSLayout to 0 for Touch pro, or 1 for Fuzes.
Create the key if it is not there.
mrvanx said:
Na, theres a reg setting which determines the layout. Goto HKLM\HARDWARE\DEVICEMAP\KEYBD
Click to expand...
Click to collapse
Oops, I guess I should not pretend to know something about a device I don't own myself
I downloaded Mobile Registry Editor and whenever I try to make a new dword value it says access is denied. I m finding a new one right now
prateeksach said:
I downloaded Mobile Registry Editor and whenever I try to make a new dword value it says access is denied. I m finding a new one right now
Click to expand...
Click to collapse
U can use total commander.
\\Plugins > registry > HKLM\HARDWARE\DEVICEMAP\KEYBD
d.tap +Add value+
type CWSLayout > check DWORD
type 1 in value.
Done.
yeah thx i got it it works perfectly now with the ROM and stuff but it still has a low memory cause its a testing phone. It has only 77 MB and others have 201 or something!
prateeksach said:
yeah thx i got it it works perfectly now with the ROM and stuff but it still has a low memory cause its a testing phone. It has only 77 MB and others have 201 or something!
Click to expand...
Click to collapse
How did u get the 77MB reading?
In memory applet, it will show like this for Program on right side:
Total:?
In Use:?
Free:?
In about applet it will show total memory available. or maybe u could post a screenshot
monx® said:
How did u get the 77MB reading?
In memory applet, it will show like this for Program on right side:
Total:?
In Use:?
Free:?
In about applet it will show total memory available. or maybe u could post a screenshot
Click to expand...
Click to collapse
Well here it is and it is probably because it is a testing phone and i know there is no way to increase but i hope there was because i have to soft reset a lot to get the apps running.
But in the Device Information part it says, 160 MB RAM size
OMG, just to confirm, did u use ROMeOS² ENGLISH version?
For all HTC Raphael base device,
-U will get total Memory of 213.28MB (in about applet)
-In memory applet, Storage total is 362.02MB & Program total 213.03MB.
But I really dont know FUZE total RAM. I need a little search but mods should move this thread since it is related to my custom ROM & no need seperate thread IMHO
so..just wondering, did you manage to get Fuze's keyboard to work with Romeo perfectly? What about the extra keys and missing keys on Fuze? (i.e. OK button and missing Ctrl button - does the OK button still work like it did on AT&T stock rom?)
baboola said:
so..just wondering, did you manage to get Fuze's keyboard to work with Romeo perfectly? What about the extra keys and missing keys on Fuze? (i.e. OK button and missing Ctrl button - does the OK button still work like it did on AT&T stock rom?)
Click to expand...
Click to collapse
Yeah, the whole keyboard works perfectly as the original keybaord from AT&T Fuze.
And ya, I used the ROMeOS2 ENGLISH Version and no, it did not change the memory applet or the about applet. I have done like 10 hard resets changing ROM's and it still shows the same thing. It is probably because I got it as a testing device, not the real one. It even says "Smart Mobility, Test Only, Not for Sale" when it turns on. I want to increase the memory. is there any way possible except from the fact that I should buy a new one.
prateeksach said:
It is probably because I got it as a testing device, not the real one. It even says "Smart Mobility, Test Only, Not for Sale" when it turns on. I want to increase the memory. is there any way possible except from the fact that I should buy a new one.
Click to expand...
Click to collapse
Then u should upgrade the ram chip by urself or buy the released device. maybe the test device only hv small amount of ram
prateeksach said:
Yeah, the whole keyboard works perfectly as the original keybaord from AT&T Fuze.
And ya, I used the ROMeOS2 ENGLISH Version and no, it did not change the memory applet or the about applet. I have done like 10 hard resets changing ROM's and it still shows the same thing. It is probably because I got it as a testing device, not the real one. It even says "Smart Mobility, Test Only, Not for Sale" when it turns on. I want to increase the memory. is there any way possible except from the fact that I should buy a new one.
Click to expand...
Click to collapse
I'd probably ebay it for a lower price specifying that it's a test unit. At least it'll salvage $100+ towards Fuze.
I found this fix for FUZE remap in the wiki section. Does anyone know what the difference is between the reg edit and this .cab is? Was reg edit only available for romeos2 cuz it's already built in the rom? Or should I use the .cab file after flashing?
Sorry for asking the same question so many times. I'm very new at this and want to make sure I know what i'm doing before I actually do it. Thanks in advance for clarification.
baboola said:
I'd probably ebay it for a lower price specifying that it's a test unit. At least it'll salvage $100+ towards Fuze.
I found this fix for FUZE remap in the wiki section. Does anyone know what the difference is between the reg edit and this .cab is? Was reg edit only available for romeos2 cuz it's already built in the rom? Or should I use the .cab file after flashing?
Sorry for asking the same question so many times. I'm very new at this and want to make sure I know what i'm doing before I actually do it. Thanks in advance for clarification.
Click to expand...
Click to collapse
I tried both and neither one worked for me. I'm at a loss here.
NVM - stupid noob mistake - I forgot to soft reset.
All is well now and working.
I have zero interest in Sprint Picture Mail. However, the account is sort of "hardwired" into the phone and there is no (official) way to disable it that I can find. It doesn't even show up in the list of accounts under Options in Pocket Outlook.
Does anybody know some sort of tweak to get rid of this account?
This would include...
1. Removing it from "send" options when emailing pictures (album)
2. Account chooser for Pocket Oulook
3. TF3D icon on the mail tab
thx1200 said:
I have zero interest in Sprint Picture Mail. However, the account is sort of "hardwired" into the phone and there is no (official) way to disable it that I can find. It doesn't even show up in the list of accounts under Options in Pocket Outlook.
Does anybody know some sort of tweak to get rid of this account?
This would include...
1. Removing it from "send" options when emailing pictures (album)
2. Account chooser for Pocket Oulook
3. TF3D icon on the mail tab
Click to expand...
Click to collapse
I believe its an extra cab that installs after a hard reset. Try hard resetting, and stopping the customization.
If there are any Sprint cabs you want they are floating around here or ppcgeeks.
sporklover said:
I believe its an extra cab that installs after a hard reset. Try hard resetting, and stopping the customization.
If there are any Sprint cabs you want they are floating around here or ppcgeeks.
Click to expand...
Click to collapse
Well, that's definitely a solution, but I'd rather not have to hard reset my device. I have the settings just the way I like it now.
Does anybody know how to get rid of it after it's already installed?
just stick a peice of black tape over the portion that says picturemail on your phone...
t0mmyr said:
just stick a peice of black tape over the portion that says picturemail on your phone...
Click to expand...
Click to collapse
Thank you for the incredibly constructive answer. You are my hero. Jerk.
thx1200 said:
I have zero interest in Sprint Picture Mail. However, the account is sort of "hardwired" into the phone and there is no (official) way to disable it that I can find. It doesn't even show up in the list of accounts under Options in Pocket Outlook.
Does anybody know some sort of tweak to get rid of this account?
This would include...
1. Removing it from "send" options when emailing pictures (album)
2. Account chooser for Pocket Oulook
3. TF3D icon on the mail tab
Click to expand...
Click to collapse
I'd love to know how to dump this as well without a hard reset and manually adding the all the other useful cabs myself.
Thanks for posing the question, now to wait for a good answer....
Try downloading the cab from somewhere, installing it, it will say the previous version has to be removed, after it removes the previous version, hit cancel to not install the new version.
Might be worth a shot, although I don't know why you wouldn't want picture mail, it's not like you have to use it, but why remove features?
clamknuckle said:
Try downloading the cab from somewhere, installing it, it will say the previous version has to be removed, after it removes the previous version, hit cancel to not install the new version.
Might be worth a shot, although I don't know why you wouldn't want picture mail, it's not like you have to use it, but why remove features?
Click to expand...
Click to collapse
That is a good idea. I'll have to try that!
As for why, good question. I don't really know why it bothers me so much. Maybe just because I like less clutter? Maybe it's an OCD type of thing. :-D One of the first things I did was install Advanced Config and remove the sprint music/tv tabs because i didn't want to use them, even though i didn't have to use them. :-D
clamknuckle said:
Try downloading the cab from somewhere, installing it, it will say the previous version has to be removed, after it removes the previous version, hit cancel to not install the new version.
Might be worth a shot, although I don't know why you wouldn't want picture mail, it's not like you have to use it, but why remove features?
Click to expand...
Click to collapse
I'm definitely going to try that! Good idea.
As for why, I don't like the extra account when I got from my text to email accounts BUT the main reason is because it works like POO POO! I hate how it is so damn clunky in it's operation and even though I don't use it to send picmail, if I get a picmail it goes in there.
I applaud Sprint for trying but damn, try a little harder next time. I could have done without this particular crap a$$ feature.
I'm also very interested in dumping Sprint Picture Mail. Since we're limited to six accounts in Pocket Outlook, its being there keeps me from adding in another account I actually use, so it's frustrating that they would add that in by default. Tried deleting all of the registry keys, installed files etc that are done as part of the CAB installer, but it's STILL there! Haven't been able to figure out how to bypass the customization step, otherwise I'd do a HR in a heartbeat and see if skipping the CAB install would work, so still awaiting a solution to this...
i tried but sprint mail was not completely removed , i even installed the other version and it got completely installed and i could not un install it using memaid ! there should be a smarter way toget rid of this sprint B/S.
i don't think it can be removed this way.
you will need to load a custom rom without the picmail.
in the time you have wasted waiting for an easy solution you could have flashed and reloaded all of your settings.
Not everybody wants a to use a cooked ROM. You know, it really gets tiring when know-it-alls pop into threads and instead of contributing something useful just say "you should have just done x,y,z instead of doing what you actually wanted to do." It's already been established earlier in the thread that hard resetting (which running a cooked ROM requires) is not an acceptible solution. I do not appear to be alone in wanting an alternative solution. If you don't have a solution or a constructive comment, can't you just, you know, not post anything?
maan76 - Thanks for trying that method out. I've been too busy to tinker. At some point, I'm going to try scouring the registry and DLLs in \Windows\. Pocket Office is extended just like any other MS app -- through DLLs. So unless Picture Mail has been hardwired through some bizarre method or bundled together with a load of other useful features into one big unremovable DLL, I have got to think that there must be some DLL somewhere that can be unregistered somehow -- it just hasn't been discovered yet. I hope anyway! But you never know...
lafester said:
i don't think it can be removed this way.
you will need to load a custom rom without the picmail.
in the time you have wasted waiting for an easy solution you could have flashed and reloaded all of your settings.
Click to expand...
Click to collapse
I echo thx2100 but will say the MAIN reasons I don't want to just run a cooked ROM right now is that the only real advantage at this time is they are light on the apps to free up ram. I come from the 6700 and 6800 and I'm in heaven with the speed and ease that the TP has when running multiple apps.
None of the new ROM's right now really dazzle me but if one comes around that is hot sh$# then I might run it.
With my stock ROM I have no surprises and only one really annoying feature which is the picmail but I can live with.
yep I totally agree thx 200,that there is no need for the cooked ROMs right now for the TP , why I am risking myself in a cooked ROM ?????????? to save RAM nop ! RAM is highhhhhhh and we have plenty of it in tp not like the mogul when the people were racing to build a ROM with higher free RAM after booting ! to save couple megabytes !, now with this strong hardware in TP , we have plenty of RAM .
the other reason which drove us before for flashing ROMs is the new applications (ex Manila for htc 6800 mogul ,u tube......etc) now we ve got the most updated versions of these software in the touch pro.
no logic reason for flashing ROMs at this moment , probably when new software will come up or super tweaks that require flashing ROMs , but definetely not now , we are still new and still learning about the Touch pro.I am seeing junior members building ROMs cause it is easy with this 288 MB RAM , I bet nobody was able to build ROMs for the Apache or the Mogul cause of the limited RAM.
we have a long way in improvement in touch pro before building ROMs.
thx1200 said:
maan76 - Thanks for trying that method out. I've been too busy to tinker. At some point, I'm going to try scouring the registry and DLLs in \Windows\. Pocket Office is extended just like any other MS app -- through DLLs. So unless Picture Mail has been hardwired through some bizarre method or bundled together with a load of other useful features into one big unremovable DLL, I have got to think that there must be some DLL somewhere that can be unregistered somehow -- it just hasn't been discovered yet. I hope anyway! But you never know...
Click to expand...
Click to collapse
Using MSCEInfo, I've been able to identify every registry change and file modification made by the Sprint PictureMail CAB and have undone them all to no effect. So, either some other routine is making changes related to PicMail or it's hardcoded into the ROM. Hopefully, it's not the latter...
Good luck and please let us know if you find out how to do it. I've pretty much given up and am just waiting to find a stripped down ROM for the Sprint Touch Pro that doesn't include PictureMail, Touch Guide Mobile or any of the other bloatware that Sprint decided we had to have.
Solution Removal Sprint Picture Mail
I found the solution this morning and I successfully removed the sprint picture mail and I also successfully added my yahoo mail
here what you need to do
1-install the sprint picture mail Cab
2-using resco file explorer or anything else go to windows folder
3-in resco explorer , unclick hide hidden files and unclick hilde file extensions
4-look for sprint picture mail cab , next to it you will find sprint picture mail.exe and some other files cary the same name.
5-this .exe is made by the second installation you just made not ROM related , but still you can not remove it ,for some reason.
so rename it into anything .exe , and do the same for the rest of the files including the cab , not delete them all you should be able to do so .
I did these steps exactly in that order and I opened the messages folder and I was soooo happy not seeing the picture mail account .
Good luck guys
maan76 said:
I found the solution this morning and I successfully removed the sprint picture mail and I also successfully added my yahoo mail
here what you need to do
1-install the sprint picture mail Cab
2-using resco file explorer or anything else go to windows folder
3-in resco explorer , unclick hide hidden files and unclick hilde file extensions
4-look for sprint picture mail cab , next to it you will find sprint picture mail.exe and some other files cary the same name.
5-this .exe is made by the second installation you just made not ROM related , but still you can not remove it ,for some reason.
so rename it into anything .exe , and do the same for the rest of the files including the cab , not delete them all you should be able to do so .
I did these steps exactly in that order and I opened the messages folder and I was soooo happy not seeing the picture mail account .
Good luck guys
Click to expand...
Click to collapse
I used Total Commander and removed the file and it worked.
Thank you very much! Now to test how picmails are recieved now.
mrrogers1 said:
I used Total Commander and removed the file and it worked.
Thank you very much! Now to test how picmails are recieved now.
Click to expand...
Click to collapse
Can you point out which specific cab you installed (was it just the one built into the TP ROM?) and which file(s) you removed to get this to work?
Also, can you confirm that this removed the Sprint PictureMail account from both the Outlook account list AND the Mail TF3D tab???
del4 said:
Can you point out which specific cab you installed (was it just the one built into the TP ROM?) and which file(s) you removed to get this to work?
Also, can you confirm that this removed the Sprint PictureMail account from both the Outlook account list AND the Mail TF3D tab???
Click to expand...
Click to collapse
Well I seem to have completely broke my ability to get picmail so I'll hold back on any instructions. I'll do some more testing and may just have to install the freakn program again.... OR I might load up a bare bones ROM and load cab's I see fit, 1 will undoubtedly NOT make the cut.
If you do not mind testing/flashing and would like to try this ROM please do so.
Build 20771, TP2 TF3D and some other Rhodium apps. Can you please test Data, activesync, bluetooth, GPS and other basic functions. Please report back even if nothing is found.
Thanks!
Updated
20 March 2009
07:00:00 GMT
Just added the usual missing stuff and cleaned it up.
Anyone test GPS yet?
http://www.4shared.com/file/93909516/d3e9cb1e/RC_At0mAng_V51_03-20-2009_HTC_TP2_TF3D.html
For new people who may need some additional programs loaded up before using the ROM.
Cab file to install UC config setup on Storage Card. To be run before you flash. If you are a UC user just back up your cab storage folder and sdconfig.txt file. Or dont use it at all
Select Storage Card as install directory
http://www.4shared.com/file/93912051/c54bf7e3/At0mAng_Pre_Install.html
Files included:
Advanced Config
GSensor Config Tool - Will give the writer credit once I find post again
Clear Temp
SoftReset
SPB ScreenCapture
Total Commander
At0mAng said:
If you do not mind testing/flashing and would like to try this ROM please do so.
Build 20771, TP2 TF3D and some other Rhodium apps. Can you please test Data, activesync, bluetooth, GPS and other basic functions. Please report back even if nothing is found.
No need to report about the TP2 Manila bugs.
Thanks!
http://www.4shared.com/file/93878824/dfd20272/Test_3-19_RUU_signed.html
Click to expand...
Click to collapse
Is this a New build or the same one posted from last night?
davezaff said:
Is this a New build or the same one posted from last night?
Click to expand...
Click to collapse
A newer build...just want to make sure it is ready for general relase.
Installed, so far data and activesync look the goods. Ill test GPS etc over my lunch break.
Some different program icons...what do you think?
Same for me... Data, activesync, and basic functionality looking good so far. A couple of big pluses for me - memory use is only about 33%. It was above 50% on NRG's rom with TF3D 2 (that's not meant as any kind of negative towards NRG, I love his newest rom too, just a comment). And Weather Watcher works correctly. On all other cooked roms I've tried Weather Watcher appears "zoomed out".
At0mAng said:
Some different program icons...what do you think?
Click to expand...
Click to collapse
Do you have new taskbar icons too? (hopefully I'm not being too greedy here).
I just flashed with this rom and checked the date. It said rom date is 03/14/09 was wondering maybe you just forgot to change the date?
thanks
A small problem (with a solution). You can't add file explorer as a favorite anywhere in the first two rows of favorites. Or more acurately, you can add it, but it won't launch. The solution is explained in post #500 here:
http://forum.xda-developers.com/showthread.php?p=3463613&highlight=file+explorer#post3463613
Joecd04475 said:
A small problem (with a solution). You can't add file explorer as a favorite anywhere in the first two rows of favorites. Or more acurately, you can add it, but it won't launch. The solution is explained in post #500 here:
http://forum.xda-developers.com/showthread.php?p=3463613&highlight=file+explorer#post3463613
Click to expand...
Click to collapse
Try my icon pack I posted a few rows up and it should work without the fix.
Thanks for the solution but it may not be needed with the icon pack.
Please report back.
Thanks!
Yes the date was not changed.
If you are talking about my status icons I may have them done before this build is officially released. If not I will have an add on pack when this is officially released.
Thanks for all the help.
Just flashed your new test ROM. One stupid question - how does the GSensor work? Also the default keyboard does not seem to be of Fuze - guess I need to install the fuze keyboard cab from your other thread.
pkshr said:
Just flashed your new test ROM. One stupid question - how does the GSensor works? Also the default keyboard does not seem to be of Fuze - guess I need to install the fuze keyboard cab from your other thread.
Click to expand...
Click to collapse
Go to tools...and in there is a nifty little app to change it.
Not sure what you mean how it works. I believe it is there for apps that use so they can auto rotate.
At0mAng said:
Go to tools...and in there is a nifty little app to change it.
Not sure what you mean how it works. I believe it is there for apps that use so they can auto rotate.
Click to expand...
Click to collapse
Regarding the GSensor thing, I was expecting "it is there for apps that use so they can auto rotate" but it is not working for all of the apps. it works for the calculator program but so far calculator is the only program that rotates as it should. I wish my Garmin XT would rotate .. is there any whitelist thing where I need to enter the information of Garmin XT ?
I will keep on testing this ROM and update.
pkshr said:
Regarding the GSensor thing, I was expecting "it is there for apps that use so they can auto rotate" but it is not working for all of the apps. it works for the calculator program but so far calculator is the only program that rotates as it should. I wish my Garmin XT would rotate .. is there any whitelist thing where I need to enter the information of Garmin XT ?
I will keep on testing this ROM and update.
Click to expand...
Click to collapse
Yes there is...I will find it and let you know or include it in the ROM
Edit
Sorry dont have the info for Garmin...search around may find it
voicecommand
Atom.
I'd love to install this ROM and give it a go, however I really need/use Ms Voice Command and WorldCard Mobile from the stock ATT Fuze rom. I know youve taken VC out of your previous roms, if these are not included in this rom either, would it be possible for you to cab these up as post installs?
At0mAng said:
Yes there is...I will find it and let you know or include it in the ROM
Edit
Sorry dont have the info for Garmin...search around may find it
Click to expand...
Click to collapse
You can use the G-Config program to add programs to the whitelist, available here. Makes adding applications a breeze, hit add new app, open the app and put the stylus in and reset. Works real nice with tf3d too
nableezy said:
You can use the G-Config program to add programs to the whitelist, available here. Makes adding applications a breeze, hit add new app, open the app and put the stylus in and reset. Works real nice with tf3d too
Click to expand...
Click to collapse
Nice...will have to add it to my SDConfig package
abhi2879 said:
Atom.
I'd love to install this ROM and give it a go, however I really need/use Ms Voice Command and WorldCard Mobile from the stock ATT Fuze rom. I know youve taken VC out of your previous roms, if these are not included in this rom either, would it be possible for you to cab these up as post installs?
Click to expand...
Click to collapse
If you send me a PM to remind me when I release this ROM I can cook one for you with both in there.
Edit...I am cooking one now if you want to test it...will post a link when done
Here is your link...
http://www.4shared.com/file/93897817/8aa5ae3c/Test_3-19_2RUU_signed.html
Has what you asked for.
Thanks a ton man
Downloading it now..
First impressions, very fast, quickly syncing with my Exchange, no flaws found im my first couple of minutes playing with it.
Was hoping to see the new start menu (the unpopular one, is seems, but the new one) and it wasn't there...is there a fix or cab to have that?
Thanks for allowing the preview to this tight rom!!!!! will get more details and will edit this post if bugs are found
Jholton