Hello
When i use the MTTY tools, i obtain this :
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xBE(190) is BAD block !!!
Block 0xDC(220) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1D700
Partition[3], type=0x4, start=0x20900, total=0x1E700
CE Total Length(with sector info) = 0x4224800
CE CheckSum Length(without sector info) = 0x4120000
Cmd>task 2a
Check block : 190 - Bad
Check block : 220 - Bad
My question is about the partition[0], is it the IPL partition ?
In fact, i would like to kwow which is the adresse (begin and end) onf the IPL on the Hermes
Great thanks !!
I have the same readout as you from MTTY. I believe its a branding done by Telstra. I haven't been able to fix these "bad blocks" though I believe Wam7 said they did when they updated to Hard SPL. Didn't work for my Telstra Jasjam though...
It may be that you won't be able to fix these.
Cheers...
Hi ultrama69,
This readout is the your's lol, i have copy the your's on an other topic ! I just want to know if the [partition0] is the IPL.
Regards,
Nixeus
Sorry, can't answer that.
Maybe someone else in the know will answer your question.
Cheers...
can you please five the link for mtty for hermes
Related
Hi, does anyone report bad block issuing 'info 8' on the bootloader (1.04)?
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19800
Partition[3], type=0x4, start=0x1C800, total=0x1E000
CE Total Length(with sector info) = 0x39E4000
CE CheckSum Length(without sector info) = 0x3900000
CE: OS 5.1.195 (Build 14955.2.3.0)
ROM: 1.18.255.3 (07/22/06 WWE)
Ext-ROM: 1.18.255.106
Radio-ROM: 1.16.00.00 (with SIM/CID patch)
CID: SuperCID
See this:
http://forum.xda-developers.com/showthread.php?t=278420
"Bad blocks bad blocks, what you gonna do? What you gonna do when they come for you!"
Hello all,
When I execute info 8 on my device I get the following output:
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
Block 0x3FA(1018) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1A900
Partition[3], type=0x4, start=0x1D900, total=0x1CF00
CE Total Length(with sector info) = 0x3C0C800
CE CheckSum Length(without sector info) = 0x3B20000
USB>
Does every body get those bad blocks, or have I corrupted somthing and how to fix it??
Block 0x3A8(936) is BAD block !!!
Block 0x3A9(937) is BAD block !!!
Block 0x3AA(938) is BAD block !!!
p.s. My device is working fine!!
Simple.
this was common when the device first came out... there is a whole thread or 2 dedicated to this...
http://forum.xda-developers.com/showthread.php?t=278420
Checked the thread and it seems there is nothing conclusive about the issue.
However, my phone has a serial "HT 642xxxxxxx." so it is not that old!.
Edit, I have i-mate JASJAM, IPL 1.00 SPL 1.04 with the ROM info below.
My TyTN is 628xxx tho not with the original ROM, but the new 2.05 AKU 3.3 ROM. I have no naughty blocks..not even baddish, just few reversed.
Hi Guys,
I have a M3100 SuperCID, for some reason the phone likes to crash and lock up when ever it likes, and will drop radio signal practically all the time... As described in the bricking thread.. i've tried everything to fix it using information from threads and the hermes wiki, but the phone still is unusable..
I recently noticed that when i run the INFO 3 command my phone does not respond... it only Displays: HTCSH and mtty stops responding.
I've just loaded the latest test TMob wm6 update but that hasn't fixed the problem either...
Any ideas on how to bring my phone back alive would be grateful!??
Here is a log of the other info commands...
info 2
HTCSSuperCID HTCE
Cmd>info 4
HTCS Lœ3ÆHTCE
Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.30.Olipro
Built at: Apr 25 2007 16:47:14
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1E100
Partition[3], type=0x4, start=0x21300, total=0x19500
CE Total Length(with sector info) = 0x4369800
CE CheckSum Length(without sector info) = 0x4260000
here is the output from mtty :
Cmd>info
Cmd>info2
Command error !!!
Cmd>info 2
HTCSSuperCIDشéـHTCE
Cmd>info ?
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3FA(1018) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x21C00
Partition[3], type=0x4, start=0x24E00, total=0x1A200
CE Total Length(with sector info) = 0x4AE7000
CE CheckSum Length(without sector info) = 0x49C0000
Cmd>checkimage
IPL CRC checksum = 0x45D0C783
SPL CRC checksum = 0xC27E0E42
CE CRC checksum = 0xCDB03407
ExtROM CRC checksum = 0x5C724477
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
Cmd>
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3FA(1018) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x21C00
Partition[3], type=0x4, start=0x24E00, total=0x1A200
CE Total Length(with sector info) = 0x4AE7000
CE CheckSum Length(without sector info) = 0x49C0000
Cmd>
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.10.Olipro
Built at: Apr 22 2007 13:32:26
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
it fails on radio upgrade , i v tried almost every radio rom available, SD method also,
i am able however to change between bootloaders.
thanks.
Hi
Long time without post here lol, well, I sold my T-Mobile MDA and my friend did something to it, now it stuck in boot mode tri-color screen, I tried anything to it and it just not boot OS, even install full ROM from T-Mobile and nothing, it has the old SPL-1.40.Olipro on it and I don't find the way to reflash it to upgrade to 2.10, I searched on forums but not good answers.
Thank You for the help.
Cmd>info 2
HTCSSuperCID HTCE
Cmd>info ?
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x2C(44) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1E100
Partition[3], type=0x4, start=0x21300, total=0x19500
CE Total Length(with sector info) = 0x4369800
CE CheckSum Length(without sector info) = 0x4260000
Cmd>checkimage
IPL CRC checksum = 0x63C5788C
SPL CRC checksum = 0x921BC30
CE CRC checksum = 0x39810851
ExtROM CRC checksum = 0x15FAD700
Radio Image CRC checksum = 0x40022691
Cmd>info 3
HTCSH
Cmd>