Related
Just to let you know that I bought the Brando Screen Protector for the Diamond2 from Inkino. They even installed it for me which is a bonus. The screen protect is absolutely amazing and is a good as any that I have seen. Do not scrimp on cheap nasty ones that come in multiples in a pack. You only ever need one good one. The Ikino guy showed me a Treo 650 which had a Brando Screen protecter that he had installed when the Treo 650 came out (was I born then ) and it was in a very impressive state. If you are going to install it yourself then they do recommend doing it very slowly and cleaning the screen before-hand is crucial. Common sense I know, but you would be surprised how easy it is to get dust under the protector.
got mines today. 2 pcs, both from Brando. one is the Ultra Clear version.
i've applied the "normal" one for now and i must say it's really cool!
putting it on went pretty much smooth. in the bathroom, where i guess there's less dust, i've cleaned first the screen with a special lotion. then waited until it dried up, after that applied the Brando screen protector as shown in the "instructions".
went OK, only had to start again 2-3 times, then found the right position. went over it with a credit-card while smoothing it out on the D2's screen. it sits very good, no air bubbles and really just a few very small dust pieces at the border of the protector - does not disturb.
so, yes, the Brando screen protectors are really the thing!
now i want only the textured back plate and then i'm really happy!
PS: didn't find the screen-protectors on the romanian market, so had to order them from speedshop.hu (hungary), but eveything went very smooth! in 2 days after the payment
Could you post pictures for me? I'm looking for a screen protector too. Does it cover the whole black part, or just the 3.2 inch screen part?
it covers the display + the black border around. it's actually identical in size with the one delivered in the stock package, the difference in the aspect being the "U" shape around the front camera (the original one is a circle).
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
well0549 said:
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
Click to expand...
Click to collapse
yeah, i know. the problem is that i didn't pay enough attention when putting on the screen protector that came in the box and i messed it up (got dust and airbubbles under the protector), so after i've tried to get it clean, i messed it up so bad that it got useless.
this is why i ordered 2 brando's (speedshop.hu has 2 versions) - put on one that is not the "ultra clear" version and now i am happy with it.
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Laban said:
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Click to expand...
Click to collapse
Use CD/DVD cleaner
I use those: 3M Vikuiti DQC160
http://www.3m-displayschutz.de/dqc160
Scratchproof, crystal clear and very easy to get on and off.
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
loadstone007 said:
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
Click to expand...
Click to collapse
You should put one, if it is not too late: once your screen is scratched (and it will get scratched, very fast if u use the stylus), you will have to buy a new screen cover (I think it include the digitizer), which will be much more expensive, or live with scratches which will blemish your screen, which are especially bad with TD2: the very high pixel density will cause moiré pattern (rainbow effect) around the scratch and I find that very annoying...
It is not so hard to install, mine was my first attempt at installing a screen protection, and it went flawlessly: just be careful, do not hurry, do not put your fingers on the screen (once cleaned) nor on the sticky face of the protector, and work in a clean, dust free, well lit room. Dust free is hard, but an excellent trick i did found here was to use your bathroom, after a hot shower (keep the water runnnig a long time, and take a shower yourself ) It will ensure YOU are dustfree ;-), but also, more important, water condensation will remove almost all particles in suspension, and you will get very clean air. BTW, better to wear minimal clothes after your shower: clothe fibers is the most common dust/particles....
If you work in such a place, the only difficult thing is to get the screen protector perfectly aligned. I started on the top, got the grid and camera holes aligned, tried to cover the screen from top to bottom, and restarted as soon as I saw the slightest misalignment without letting the screen protector out of my hand (else it is very difficult to repick - that was the only trouble I had after I was too enthusiatic and let it go while there was still a small misalignment.
If you keep calm, and have good hand coordination, 2 or 3 attempts and you will have an invisible screen protector ;-) Oh yes, and start with a clean screen (I cleaned mine with distilled water and a soft microfiber glass cleaning tissue...worked very well....)
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
loadstone007 said:
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
Click to expand...
Click to collapse
slightly, yes....on the other hand, it is more slippy, although not enough for my taste when using fingers, but it is an improvement compared to the bare screen. Before I installed the screen protector, it was much too grippy for confortable finger sweep motions imho (clean screen, after a while finger grease act as a lubricant ;-) ).
All in all, weighting the slight decrease in sensitivity against the friction reduction...I prefer my screen with the screen protection, even taking out the protection factor
There's this Zagg product for the TD2, which is invisible. Not really sure about this... I might just get the regular screen protector, and use a silicone case.
I would recommend placing the bottom edge of the screen protector up against the bottom buttons to align it. I managed to get it perfect first time.
I find the supplied screen protector picks up finger prints even worse than the bare screen. Are the after market ones any better?
My reseller did the protective screen installation for me. Did a good job. Did you guys get the free pouch also? I am not sure if the pouch came with the unit or if it was a free gift as a promotion.
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
Those look the same as the orignal, that came with the device.
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
May be they have some particular features such as "antiscratch" or "washable screeing protector"!
I have also recently bought original one SP P240 and very glad with it!
And never mind, original parts are not worse than other brands!
Has anybody every used this brand of screen protector's before? They just sent me an email saying that they have in stock screen protectors specific for the T-mobile TP2 and I am debating whether or not to buy them.
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I originally had a Martin Fields on my Touch Cruise that I loved, but they don't make the screen protectors for the T-mobile TP2
I used one on my MDA (prior to getting the TP2). I loved it (make sure to get the crystal clear, not the non-glare, if they have a choice). 3 years and looks like new, nice slick surface for using the stylus, extremely durable. But I don't have experience with any others (except the one that came in the TP2 box which I also like a lot).
Thanks for sharing!
I´ll go for one of those
The crystal clear is one of the best I've used before!
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
is the anti glare version kinda gritty to the touch ive never used one?
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
Speaking of anti-glare... im using one on my Iphone 3G..got it back from Manila,Philippines on my last holiday, some chinese brand screen that i thought will be just a piece of crap screen protector.
to my surprise it was 98% perfectly fit on my iphone...and it was a great anti-glare screen protector. my wife likes it now she wants 1 for the htc touch pro2. ive seen some on ebay i might order it this week.
for those who's using one... where did you guys buys the anti-glare screen protector?? -thanks
Arcarsenal said:
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
Click to expand...
Click to collapse
Nice one thanks
I've raved about it before many times, just search my posts on here and PPC geeks, but the BoxWave AntiGlare is the best screen protector for any device hands down period end of story etc!
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
I wouldn't say gritty, but its definitely neither frictionless or sticky and doesn't impede your fingers or stylus movement in anyway... its got a matted texture, and I really like using my stylus with that texture! more of a paper feel, offering just the right amount of feedback and friction.
You do lose a tiny bit of clarity compare to the Crystal version, but for the anti-glare, anti-finger print benefit, I love it!
finger prints and face oil on the stock screen protector have been driving me nuts!
I'm supposed to get it today but heading out of town for a wedding this weekend so may not have a chance to report or upload pix until monday
Thanks for the report, i can imagine a paper texture! i think i may order one. cheers
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
venomshot629 said:
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
Click to expand...
Click to collapse
Personally, the 3M crowd is better because then you don't have to worry about the screen protector getting scratched.
I had purchased a Boxwave Anti-Glare before and it worked decently, but the amount of glare it reduced was negated by the amount of brightness that needed to be increased.
Boxwave, in my opinion, works if you have a case protecting it. But trying doing this with a Boxwave.
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
NOT gritty.
I have used Boxwave screen protectors for years and have NEVER been disappointed. Excellent longlasting product that your stylus simply glides across; I have settled on the Anti-Glare. One post says that Boxwave isn't TOTALLY scratch-free like some other 'full-body' clear protectors. Correct. However, personally I do not like the idea of spraying a liquid all over my device in the application process. 'Full-body' protectors are applied just like installing tinting on you car's windows.
Suggested application procedure.
Before beginning I have two clean microfiber cloths; one is included. Clean your phone's screen well; preferably w/one of those microfiber cloths. Close windows in bathroom, run shower on hot a bit & turn off. Moisture will pull all the dust outta the air and drag it to the floor. Vent heat (u don't want it to be uncomfortable in there).
Now that all the floating dust is negated, clean your screen again w/the the other microfiber cloth and apply protector. It is helpul to have some tape applied to a corner or two of the protector. Utilizing the tape, lift and reapply as needed using the supplied squeegee or a credit card to clear out bubbles; you may need to lift protector and use the microfiber cloth to pick up some lint/debris to ensure a clean install.
You should have a lint- and bubble-free application if you were careful.
Good luck from Lincoln!
I just got the new Boxwave ClearTouch Crystal screen protector for my T-Mobile TP2: http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I had previously had a Boxwave on my MDA. That has lasted 3 years with no signs of wear, and I was extremely pleased with the fit and feel, so was hoping to do the same for my TP2. I researched all of the competition and read many forum posts on the subject. My main criteria were:
1) quality
2) exact fit
3) feel with finger and stylus
4) longevity
Price was less of a concern as I am hoping I will only ever need just the one for my TP2 (if my previous experience with the MDA is anything to go by), and so the lower priced ones, or the ones that came with 2 or 3 in the pack, were not a strong selling point for me.
The other main one I narrowed it down to was the Bodyguardz, and I probably would have got that if the Boxwave hadn't been coming out soon.
Boxwave advertised pre-orders were available for October 9th shipping. I searched high and low but couldn't google a single coupon code, so ended up paying full price of $12.95 + $2.50 shipping. They shipped a day or so late, and because of the long holiday weekend it arrived a little later than it probably could have, but as far as shipping, packaging, tracking go, I give Boxwave an A-
I had actually been perfectly happy with the screen protector supplied by HTC, but as others have noted, in some cases it may have been a tiny bit too large, causing bubbles along one edge. I think I had put it on pretty perfectly, but then, in my obsessive need for perfection, had pulled it off a little and proceeded to snip away too much screen in an attempt to get it to fit just right, making for an install that now looked a bit messy and with a bit of glass exposed along a jaggedy edge of protector. But the Boxwave fit perfectly, and very easily, just using the instructions on the package (i.e. I just put it on dry, no sprays or water). I did steam up the kitchen a bit first to try to remove dust, and obsessively cleaned the screen for 10 minutes before attempting the install. On my first attempt I started from the short top edge and that caused a problem as the protector was now not aligned correctly down the right side, so I pulled it up and laid it down again from the long left edge, making for a much easier alignment. However, when I had pulled up the protector from the first attempt, I had used the little plastic card to ease up the protector; I think I caused some very minor damage to the protector at the point of contact, as there is now a tiny minor bubble there that is probably caused by a kink I may have made in the plastic. I'll work on smoothing that out, but it's off the screen and very minor (however, let that be a warning to others to be extremely careful if you need to lift the plastic off. I tried using sticky tape but the suction was too strong for it to get a grip, and using something like a pin seemed like potential to damage the screen.) For fit and finish and ease of installation, I give Boxwave an A (and me a B- )
The surface of the 'Crystal' clear screen (I don't know how different the 'anti-glare' version would be) is very slick. In fact looking at it, touching it, sliding my finger across it, and using the stylus on it, seems exactly the same as the actual glass screen on the phone. I went into notepad and made a new note so I could doodle with the stylus. With almost no pressure I could draw lines about 90% of the time, the rest it would skip a little. But with just a tiny amount of pressure, about what you would probably use in normal use, it was at 100% coverage, with practically no drag feeling, just a nice slippery but not too slippery feel. Sliding with my finger is fantastic, I can now scroll through the programs screen much easier than I did with the original HTC. For sensitivity and surface texture I give it an A+
Overall I give Boxwave and the Cleartouch an A+. I am reminded of that old Memorex commercial 'Is it real, or is it Memorex', because looking at the phone right now, I can't tell it has a screen protector, it looks just like glass. I am sure there are others out there as good, although I doubt there are any much better. There are certainly other quality ones that are much cheaper, $15 seems like a crazy price to pay for a piece of plastic. Others come with 2 or 3 protectors, and many have coupon codes you can find on Google. And others, like Bodyguardz, come with a solution for complete protection, not just the screen. Of course time will tell, but based on my A+ experience with Boxwave on my MDA, I really am quite confident of the same longevity and performance on the TP2.
One happy customer.
I've used Boxwave screen protectors and accessories for the past several years, and I can honestly say I've been always 100% pleased. I've used both the antiglare and clear protectors, and prefer the clear ones - but it's all a matter or preference, but overall a good purchase.
First, Boxwave screen protectors have always been my standard. I've tried a couple other types (mostly what's been included with devices or what I can find in retail stores) and won't likely be messing around with that again. I personally prefer the "crystal" models over the anti-glare because I didn't like the affect of the anti-glare pattern on the display. It kind of gave it a fuzzy moire pattern. The crystal basically looks like those super glossy laptop screens - looks great in low/medium lighting but could be a problem in certain direct light situations. Still, the trade-off is worth it to me.
Second, does anyone know if any of the existing TP2 protectors will fit the AT&T Tilt 2? The European/UK model looks not ideal because of the front camera hole and the T-mobile version appears to have a slightly different button layout on the bottom. Both the Verizon and Sprint models look right to me on the web page, but Boxwave support just says to submit a request and wait. I would prefer to get a protector on mine ASAP but am reluctant to order if the fit isn't right.
Daniel
bought one for my Sprint Touch Pro 2, it applied perfectly and not noticeable at all. I prefer it way over the invisibleshield I had on my Vogue which was too rubbery and reflective.
Am I correct to think the Boxwave screen protector for the Sprint TP2, Verizon TP2, and the ATT Tilt 2 are the exact same thing? I have been looking at pictures and the screen shapes look identical. The only different ones are the T-mobile and the front facing camera versions.
Thanks!
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
I'm trying to decide which will be a better fit for a screen protector. Right now, there really seems to be only two contenders. The Zagg and the Skinomi, links provided. I know there are generic protectors but I'm looking for the "best of class" for this beast. Anyone have any suggestions before I scratch this baby?
Zagg
http://www.zagg.com/invisibleshield/htc-titan-cases-screen-protectors-covers-skins-shields.php
Skinomi
http://www.amazon.com/Skinomi-TechSkin-Screen-Protector-Shield/dp/B005OZHG7Q/ref=sr_1_1?ie=UTF8&qid=1323207100&sr=8-1
-Cyber
I personally hate the wet type of protectors for the screen. It messes up the smoothness of the touchscreen & your fingers don't glide over it easily (especially the tacky feeling Zaggs. Those are the worst).
Go with the dry ones (the kind that use static cling to stick). I ordered the REALOOK protector from Amazon that gets good reviews on their other devices. Should be here in a day or two. They feel as smooth as glass.
I guess it's a matter of preference. I had a Zagg on my Focus for a year now, and it works great for me. It does give the screen a more "grippy" feel though, but I actually like that. If you want it to feel slick, I probably wouldn't go with the wet style. Another plus for the wet though is that it's pretty much invisible when applied. You won't get any peeling or bubbling like a dry protector. A lot of screen protectors are quite noticeable when they're put on a phone.
Reading the Realook reviews on Amazon shows they get mostly great reviews. I might have to give them a try one day. For now, I'll stick with Zagg though. It just arrived yesterday, and my phone should be in by Thursday, so it'll be the first thing I install.
AT&T
I got the one from AT&T from there website and LOVE LOVE the feel it gives.
Just enough Drag to feel comfortable.
wrapsol makes some good ones as well. haven't decided what to get yet...
Got from tmart (can't post a link yet)
search ror item BD005788
Not bad at all
Brando Ultra Clear is the best.
got the htc one from clove technology.excellent fit
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Tempest790 said:
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Click to expand...
Click to collapse
Yep, got mine in too. And I agree. Its almost TOO perfect, meaning they cut this thing so there's hardly ZERO room for error when applying. I actually ended up scrapping the first one I applied (it comes w two) because I wasn't satisfied with the slight bubble in the corner.
But I FINALLY managed to install the second one perfectly. Now its amazing & 100% perfect. Thank God, cause it freakin took forever. You really have to have patience when applying these. Be sure to stick a small piece of scotch tape on the bottom side so you can peel it up easily, because you're going to be doing that a lot to get it to seat just right.
I installed the maximum body Zagg and the screen protector turned out perfect. I've installed zaggs on LG Quantum, and Samsung Focus so I had some practice. For some reason the Titan zagg seems better quality than the ones installed on the other phones. I'm really not seeing any orange peel. I also put on the case mate tough case and doesn't mess up the zagg protection at all. For the Titan I love the Zagg
Sent from my HTC Titan using Board Express
I never liked the grabbiness of the Zagg protectors. I ordered the ATT offered two-pack not knowing they were the full on glare reducing version. At first, it was a little too much, but the glare reduction seems to settle in a bit with use. OR my eyes are used to it now, but I quite like it after using it for a while. I matches the matte finish of the phone.
That said, I do want a screen protector that doesn't have anti-glare made by the same people as the ATT Samsung Focus version. Super slick, was pretty tough. Anyone know the vendor that made it for ATT?
"Orange peel" - that's a good description of my Focus Zagg screen protector. It didn't bother me though. I still have my Zagg in my drawer if the Realook craps out, but I don't think so.
I just bought the Skinomi Carbon Fiber full body kit that comes with a screen protector and really like it.
One BIG problem though: The Carbon Fiber back skin seems to have killed my signal strength. I now get no service instead of 3 bars? It covers the whole back of the phone. Even the plastic antennae area.
I'm surprised that it would kill your signal strength. I would check the metal contacts on the back case and the phone to make sure everything is touching and seated properly. Someone else in the forum tried that, and it fixed their problem.
I'm using atFolix anti-glare screen protector, it's brilliant get improved contrast and it's finger print resistant!
Got it from here: http://www.amazon.co.uk/atFoliX-FX-...m=A3P5ROKL5A1OLE&pf_rd_r=05DX3CNJ9KFAVHD8RYFC
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
xtrememanix said:
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
Click to expand...
Click to collapse
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
i'm not sure what you mean by the frost effect . to me its really clear !
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
Ok I'll answer my own question! Curiosity got better of me so decided to get Rock Naked Screen Protector AF & AG, and sure enough it's clearer then atFolix anti-glare screen no frost effect!
So if anyone's interested here are the Pros and Cons between the two screen protectors:
atFolix anti-glare got it from here http://www.amazon.co.uk/atFoliX-FX-...0VSQ/ref=sr_1_1?ie=UTF8&qid=1330083294&sr=8-1 :
Pros:
- Easy to fit
- Perfectly fits the screen of the Titan no gaps!
- Excellent anti-glare and anti-fingerprint
Cons:
- You lose sharpness of the display and get frosted glass effect on close inspection!
- Easily scratches!
Rock Naked Screen Protector AF & AG got it from here http://www.obostore.com/rock-anti-f...ed-screen-protector-for-htc-titan-p-3597.html :
Pros:
- Good anti-glare and anti-fingerprint
- You don't lose sharpness of display i.e. no frosted glass effect
Cons:
- Fiddly to put on!
- Not a perfect fit for Titan about 1mm gap around screen!
- Easily Scratches
For me between the two I prefer the Rock Naked Screen Protector over atFolix losing screen sharpness/frosted glass effect was too much of a compromise!
I'm looking for a screen protector with anti-glare if possible, what is the best one to buy?
Was going to suggest Skinomi, then saw you need anti glare. I never found one I liked with "ant glare", and I don't know of any for the View/Flyer. Sorry =/
If anti-glare becomes too difficult to find, then I highly suggest the Skinomi. I have it on 3 of my tablets currently, and have tried multiple different companies protectors including whatever Sprint sells, BestSkinEver, Zagg, Bodyguardz and a bunch of generic ebay screen protectors. After trying all the other brands, the Skinomi is my favorite and all I'll use on any touchscreen device now.
Don't know about "best", but I quite like the Skinomi (wet apply) protector on my Flyer as well.
http://www.skinomi.com/htcflp.html
I have Bodyguardz on my phone, which is also a good protector. They didn't make protectors for the Flyer, when the tablet when the first came out (why I decided to try Skinomi) but now they do. They have anti-glare, but its backordered:
http://www.bodyguardz.com/screenguardz-htc-evo-view-4g-htc-flyer-protection-cases-screen-protectors-covers-shields-skins-films.html?dir=asc&order=sort_priority
I use this one
http://shop.brando.com/brando-works...otector-htc-flyer-p510e-_p05871c1315d039.html
You're ordering from Hong Kong, so it takes a while, and the credit card hassle with overseas orders. But really high quality.
I am currently using this one from Amazon. The only thing is you have to use a hole punch to create the hole for the front camera. Other than that, it is a great screen protector that is matte.
Forum wont let me post links yet, so search for Great Shield Ultra Anti Glare screen protector for HTC Flyer.
Official htc screen protectors are £5 ($8) on amazon uk, they're great.
Any of these work better with the pen?
It's not anti-glare, but I have this screen protector, and it's fantastic. Perfect size with cut outs where they're needed. Very easy to apply as well. I use the Scribe daily, and this screen protector works great with it.
GreatShield Ultra Smooth Clear Screen Protector Film for HTC Flyer / Sprint EVO View 4G
I tried an anti-glare screen protector when I first received my View, but the graininess was much too distracting for what I primarily use it for - reading. On phones, I generally don't have a problem with the graininess that anti-glare screen protectors add. But that's probably because I'm not staring at my phone and reading for hours at a time. The size difference in the screen also makes it more pronounced. I'll put up with having to wipe finger prints off and making adjustments to avoid glare to have a better overall experience. This is the anti-glare screen protector that I used - HHI HTC EVO View 4G Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector. It did the job quite well, but it just wasn't for me on a screen this size.
I'm considering buying an anti-glare one for my Flyer because I'm getting tired of adjusting the angle when working on my tablet.
I was wondering how the stylus works on these anti-glare screen protectors? The one I have on now (simple screen protector) gets scratched easily when using the stylus.
Are these behaving better?
Anti Glare, expensive but from a good company... http://www.boxwave.com/htc-flyer-screen-protectors/htc-flyer-cleartouch-anti-glare/bwpdd/f-ztwp/
geojoking said:
I'm considering buying an anti-glare one for my Flyer because I'm getting tired of adjusting the angle when working on my tablet.
I was wondering how the stylus works on these anti-glare screen protectors? The one I have on now (simple screen protector) gets scratched easily when using the stylus.
Are these behaving better?
Click to expand...
Click to collapse
I've had this clear screen protector applied since late December. I use the tablet with the Scribe daily, and I have yet to get a single scratch on it.
When I used this anti-glare screen protector, the Scribe never left a scratch either. The Scribe worked fine with it, but since the screen protector was somewhat thicker than a clear one (which seems to be the norm with anti-glare screen protectors in my experience), I did experience some issues with it not always registering and a loss in precision at time. But it wasn't anything that was terribly noticeable most of the time. I Haven't had any problems with the clear GreatSheild in the that department.
Thank you for your answer.
Surely the screen protector I have on right now is of lower quality and I'll have to change is ASAP. I'll just have to decide between a clear or anti-glare one. But since the viewing angle and outside readability are still issues for me, I think I'll go for the anti-glare one.