Well I upgraded to DCD 3.2.4 and 3.42.50 radio rom. For some reason now I cannot get a connection through WiFi , it gives me errors such as: Cannot obtain a server assigned IP address. Try again later or enter and ip address in network settings. It also says it cannot connect to the network at times.
I am on the Verizon Wireless network. Thank you in advance for your help.
Anyone???????
Did you install the customization?
do you have wifi router install
If you have WiFiRouter installed, wireless will not work until u remove it from the list.
ill find the cab you need to fix it the wifi router changes reg files and theres a cab around here that fixes it
I installed WMWifiRouter im not able to remove it from my programs list no matter how I try. That shouldn't be the problem either way because it did this before I even installed the software.
if you dont have access to your router you have to wait until your connection/ip clears out.
if you do have access clear out your ip from router setup and reconnect
Here is the fix i found the cab.
Installed CAB still same problem: Cannot connect to the network. Check your network and service provider settings and try again. Also cannot obtain a server assigned ip address. Try again later or enter an ip address in network settings.
Anyone can help?
I really need my WiFi to work .... if it costs to fix this problem I will.
Did you install the carrier cab?
I have had the same problem since upgrading to 3.3.4 from 3.2.6. I ran the carrier customization and everything else works just fine. I have DCD's version of the 3.42.50 radio. The wifi switch is on and if you hit wifi in comm manager the icon blink on and then off in about 1 second. I don't have wifi-router installed. I'm kind of lost at the moment, but haven't had a chance to downgrade to 3.2.6 to see if it works again to rule out the wifi radio being dead.
Same Problem
I am in Canada and have the Mogul (Telus P4000) with DCD 3.2.5 Radio 3.42.50 and the WIFI is NOT working and I have NEVER installed WiFiRouter.
Is it a radio version problem?
Any help would be appreciated
same problem here, I updated the ppc6800 to the last rom from sprint 3.35 with dcd 3.01 from bell and still same thing the wifi is not working.
is it one hardware problem or can I fix with with a cab file ?
DCD 3.0.1 is so old. Use 3.3.4 or 3.2.6 instead and do a reflash to fix the problem.
drewcam888 said:
DCD 3.0.1 is so old. Use 3.3.4 or 3.2.6 instead and do a reflash to fix the problem.
Click to expand...
Click to collapse
I need one for bell, do you have a link ?
http://dcd1182.n715dp.com/
I have downloaded dcd Bell Carrier 20081031.cab
what version is it ? and how do I apply it to the phone ?
thank you
Related
(Reposted from the thread dealing with the EEPROM issue)
2 days ago I upgrade my Dopod 838Pro to WM6. There were no issues experienced during the upgrade, but since doing it I have not been able to establish a connection to my AP. I have since downgraded back to the shipping version of WM5 in an attempt to get rid of this issue as I had no problems prior to upgrading.
One thing that I have found is that if I change my AP to be unsecured, using neither WEP nor WPA-PSK I can actually connect successfully, however as soon as I go back to WPA-PSK I again cannot establish a connection. I will try WEP next and post an edit with the results of WEP.
Update:
I have just tested WEP and it works also. Problem only seems to be with WPA-PSK security. Unfortunately I can't test any other APs - my router is a Netgear DG834T with the latest firmware on it. Does the Radio ROM version have anything to do with the WLAN/Wi-Fi/Wireless Adapter in my Dopod? I have no connection issue from 3 other PCs using WPA-PSK, the issues are specific to the 838Pro.
Device Information:
ROM version: 1.30.707.8
ROM date: 12/13/06
Radio version: 1.47.00.10
Protocol version: 32.80.7020.20H
I experienced this kind of issue where I work. There is a full wifi coverage and we can connect through WPA(2)-PEAP (mschap) or Open connection + VPN.
Since I updated to WM6, I was no more able to connect through WPA to the network. I connect fine to the open connection, but as I don't have the cisco vpn client on my hermes I cannot go any further.
I found no resolution to this; I asked the technical staff in-charge and all what they were able to tell me is that my handshake request doesn't even come to the RADIUS server.
At home I am also using wifi through WPA2 PEAP (cert) and it works fine. I had some issue at first (no connection possible with any WM devices I tested)with one of my access point, but updating its firmware had this fixed.
What you could try is to have your Access Point updated.
Let us know how you handle this issue.
One thing I noticed after upgrading was that wifi encryption defaulted to WPA2 with AES and I had to set it back to WPA-PSK and TKIP
I have a similar problem but i didnt upgrade to WM6 i upgraded to the latest Vodafone Rom.
I can connect to the internet via GPRS and whilst connected to my laptop via activesynch. but whenever i try to connect to my Netgear accesspoint it just sits at connecting untill it gives up. I am using wpa-psk too But it still doesnt connect when i remove all security
It worked fine before.
Not been able to test it on any other networks yet though.
any ideas i am running out
Rom: 2.07.161.1
rom date: 02/06/07
radio: 1.32
protocol: 32.65.7020.09h
i am expirencing the same issues on my Dopod 838 Pro running win mobile 5.0
My netgear router is set to WPA-PSK/TKP and other phones can connect to it.
However my dopod just sits on connecting and does nothing. If i try to surf the web my phone conect to GPRS instead of the wireless. Any ideas this is really frustrating??
My phone resets itself automatically after making a connection to the Internet? I just upgraded to the newest DCD 2.2.6 rom and the newest radio 3.27. Any suggestions?
anyone else having this issue? My data is stuck in a 1x connection and i know i just need to update the security HDR key settings but EPST wont load on my phone. typing the command or going to the software manually just results in a quick flash of the app and then it quits. anyone know whats up?
who is your carrier?
using the alltel cab
also just upgraded to the newest radio, 3.39.10. didnt know if that could have anything to do with the EPST or not. i have not tried any other apps yet
nah its just registry keys and a file, epst.pst
i will check the alltel cab and fix it when i get home (tomorrow)
i had the same problem.. i reflashed the 3.1.1 rom and it was fine, with and without the vzw cab.
Mills00013 said:
anyone else having this issue? My data is stuck in a 1x connection and i know i just need to update the security HDR key settings but EPST wont load on my phone. typing the command or going to the software manually just results in a quick flash of the app and then it quits. anyone know whats up?
Click to expand...
Click to collapse
Hey Mills... did you reactivate the phone? You might need to with the radio upgrade... I'm not sure cause I'm still running the Alltel stock upgrade.
If you are in an Alltel native area, dial *228 and select option 3 to reactivate the phone. It will reboot and you should be set.
228 will do a lot of things but it wont change the Akey or the HDR settings. I wish everything was as easy as 228
after flashing 3.0.4, the epst worked fine.. i know its not just the carrier cabs that is the problem, i think it might me a file missing in the rom for 3.1.2 because in 3.1.1 it worked fine! but my dumb ass deleted it so its no where to be found (the 3.1.1 version i mean). But i think dcd said he is going to fix something on it. its a reg setting + a file missing or something.. holla.
DCD, new cab rolling out yet? I havnt seen any updates on the kitchen thread....
I followed G4Medic Step-By-Step instructions on how to install this rom , I used OliPro2.4. Are there any addition actions I need to perform to fully install this ROM?
It does not display any bars by the reception status and I am using 3.37.35. I had the MR1 update from VZW. Would I need to download the latest Radio? If so, I don't have an SD card how do I go about manually installing that single file that comes with the RAR?
Anyone know where I can find the fully make this rom functionable with the 3.2.6 DCD Rom?
Thank you in advance guys...
Use 3.3.4..........
sporty18 said:
I followed G4Medic Step-By-Step instructions on how to install this rom , I used OliPro2.4. Are there any addition actions I need to perform to fully install this ROM?
It does not display any bars by the reception status and I am using 3.37.35. I had the MR1 update from VZW. Would I need to download the latest Radio? If so, I don't have an SD card how do I go about manually installing that single file that comes with the RAR?
Anyone know where I can find the fully make this rom functionable with the 3.2.6 DCD Rom?
Thank you in advance guys...
Click to expand...
Click to collapse
Dude, just use DCD 3.3.4. Until No2Chem makes Nuerom3 again.
The radio is compatible, but the first question anyone will ask is did you install the carrier cab? I always dial *228 and program my phone after as well.
Does voice or data work? Did you have to call and authenticate your phone? There are many threads here dealing with going from the MR1 update to custom roms, etc.. Have you searched them out and read through?
Everything works fine , I didn't even install the carrier cab and it was working fine ( Just installed it now ) No signal bars appear , before they showed up all the time with full 2/3 bars most of the time.
Anyone have info on the touchflo program that enables it to work on landscape mode?
Is it better to install the new 3.42.50 in terms of single strength etc? Re-flashing it with a USB do I have to revert to the older Olipro?
Thank you in advance , im a extreme noob to this forum and scene of hacking cell phones sorry :|. Thank you for being patient though guys.
Do I understand right?
Everything works fine.. Internet works, Text messages work, MMS works, Phone works... You just dont get any bars?
do you have the signal icon with no bars, or is the icon not there at all?
Now that I tried messing with MMS. I just figured out that it doesn't work , when I open up Internet Explorer it doesn't even ask me to connect to the data network I think it just automatically connects. Other then that everything is working fine.
About the signal bars , it doesn't display any bars until Im in a call or while im sending a text. Wierd...
My WiFi seems to not work either it says "Cannot connect to the network. Check your network and service provider settings and try again." Is that my device or is that the Wireless LAN I am trying to connect to?
So, I have a 8125 T-mobile MDA Wizard. It is unlocked. It is currently running CR96 TouchHD v6.5.0.3.3 RC5. I have tried flashing it with TNT.19199 version 2 (Fixed Version) OS 11.0.1.1 and WM 6.1 20273 HORNET 5.1A. However, when trying to flash my device with either of these roms, I recieve a message from the updater saying that itwon't work and that i need to use a new updater(?!??!) I am very confused. Any help is greatly appreciated. I have also flashed it with the Wizard Love rom before each flash. I am also having issues with my wifi. It will turn on, and detect my neighbors WEP enabled access points, however it will not detect mine even though I am 4 feet away from it. I have gone through the proxy settings, and still no luck. I read in another post about a corrupted wifi eeprom? is that a possibility? once again, any help would be greatly appreciated
*edit: also what is the deal with all of the different radio (roms?) software upgrades? is there really any point in messing with that?
*edit: fixed wifi issue.
If you’re getting a good signal there is no point in messing with the radio.
ok, then what about the update issue? I mean when I try and reflash it, it says that I need a new updater. Will using a shelltool fix this for me even though my device is CID unlocked?
Give this “Update Utility” a try.
nope, didn't work. gave me error 300, same thing, please use a newer update utility
And another one "Update Utility".