Originally COPY From the HTC offical website...
http://www.htc.com/au/SupportDownload.aspx?p_id=140&cat=2&dl_id=449
HTC Touch Pro ROM Upgrade for Hutchison ‘3’ network customers
Date: 2008-12-04 Category: ROM Upgrade
An updated ROM is now available for HTC Touch Pro users to download. As always, HTC is committed to providing customers with the best possible mobile experience.
Installation Instructions: Follow the instructions below to install this software onto your device.
Improved Functions and Fixes
In some circumstances, while in 2G/Edge/roaming mode your device may reboot when you make a voice call and then follow it with a data connection.
Installation Instructions:
Before you proceed, please confirm that this software upgrade is a newer version than what is currently installed on your device. If it is the same version and your device is operating normally, there is no need to reinstall the software.
To check what version is installed on your device, click Start > Settings > System tab > Device Information > Version tab, and note the ROM version, CPU, and Radio version.
Warning!
* This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
* Please note that this upgrade will erase any data stored on the device. Once you proceed with the upgrade, the system can not be downgraded again.
Please back up your data first before upgrading your device. Before you run the ROM Upgrade Utility (RUU), make sure you check and do the following:
* The USB sync cable is connected to your device and PC. If your PC is running Windows XP®, ActiveSync® will run automatically to establish a connection. If your PC is running Windows Vista™, then Windows Mobile Device Center will establish the connection between your device and PC.
* All running applications on the device have been closed.
* Make sure that the battery level of the device is at least 50%. To check, tap Start > Settings > System tab > Power.
* The update will take up to 30 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the device from the PC, or press any buttons until the process has been completed.
Once the RUU is downloaded, launch the application on your PC and follow the instructions.
* Click View Readme when executing the ROM Upgrade Utility (RUU) to view detailed upgrade procedure, error message information or Q&A.
ROM: 1.90.861.8
Radio: 1.08.25.20M1
Build 19965.1.2.3
DOWNLOAD LINK : http://www.badongo.com/file/12383966
Can Anyone post version? Rom, Radio...
Thanks.
850 3G
Hi:
This activate US 3g?
Thanks
vijovame said:
Can Anyone post version? Rom, Radio...
Thanks.
Click to expand...
Click to collapse
ROM: 1.90.861.8
Radio: 1.08.25.20M1
Build 19965.1.2.3
As far as I can see no new OEMs.
Radio only upgrade posted here....
http://forum.xda-developers.com/showthread.php?t=456052
Thanks for the ROM...
Cheers
Radio Installed, US 3G not here.
Thanks
Aus 3Three uses 900/2100 network
Link is dead
Can you repost please, as the link does not work anymore.
also wanting this rom.
dead link though
Related
They basically told me you guys over here at this forum are more intelligent in this area. I've searched this forum and couldn't find any solutions to this problem so I have posted this message with hope that it will be solved.
Here is a copy of my message I posted on www.clubimate.com
ORIGINAL: dhilgaertner
This is absolutely rediculous. After upgrading to 1.66 my iMate has stopped working entirely. After talking to iMate support on 4 different occasions, I've gotten the same responce over and over.
Here it is:
Dear Mr. Dustin,
Regarding the online chat, please find below the necessary steps to reload your device with the ROM image.
1. Make sure your I-mate Pocket PC is not connected to the PC
2. On your Desktop PC, open Microsoft ActiveSync, then go to File > Connection Settings > Remove the Selection from “Allow USB Connection… “
3. Make sure your Device is on Boot loader Screen* (start up screen)
4. Reconnect your I-mate Pocket PC to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle ( Don’t use the IrDA for the Upgrade )
5. Run the Upgrade again and it will work fine without any problems
*Boot loader Screen – Hold the navigator button (round button in the middle of the answer/hang up buttons) and do a Hard Reset (Hold the power on/off button while pressing the small whole button on the bottom left of the device) simultaneously.
For any clarifications/queries, please do fell free to contact us and we shall be glad to be of assistance to you.
Regards
Sunil Kumar
Technical Customer Support
i-mate™ from Carrier Devices
Office No. 207-213
Building 11
PO Box 500085
Dubai Internet City
Dubai, UAE
Fax: 00 971 (0) 4 390 4428
Tel: 00 971 (0) 4 390 1989
www.carrierdevices.com www.clubimate.com
This E-Mail Message is confidential and intended solely for the addressee. If you are not the intended recipient, please return to sender. You must not copy, distribute or disseminate the information, or take any action in reliance of it. Any information, opinions or statements expressed in this transmission are those of the individual sender and, except where the sender specifically states them to be the views of Carrier Devices Ltd, does not represent the view of Carrier Devices Ltd. Warning: Computer viruses can be transmitted by E-Mail, it is strongly recommended the recipient should check this E-Mail and any attachments for the presence of viruses as Carrier Devices Ltd accepts no liability for any damage caused by any virus transmitted by this E-Mail.
Click to expand...
Click to collapse
Each time I've replied with "I've already done that and it still doesn't work. The rom update errors when it tries to update the radio image. Then it doesn't complete the rom update and the imate still doesn't work. No matter what I do or what version I try to update to it always gives me an error during the rom update. I can't even get into my phone anymore. I now have a $850 paper weight and tech support that isn't even worth a dime. I've talked with Ali and Karl at iMate Support both were unhelpful and eager to get me off the line. Ali even told me to call him tomorrow because he had to go home!!!! You call that tech support?
Now for the last time here is my problem:
[ul]
[*] My iMate will not boot past the blue screen.
[*] I've followed the steps above of disabling usb on activesync and installing rom
[*] 30 Minutes into the rom install (right where it starts doing the radio update) it errors.
[*] The error comes from the rom setup, not the imate, not activesync.
[*] The error tells me to do the above steps and try the rom update again.
[*] Once again the radio part of the rom update fails and tells me to try again.
[*] Infinite Loop!!!!!!!!!!!!!!!!!!!!!!!
[/ul]
I apologize for being angry, but this device is crucial to my job and is costing me thousands of dollars in lost sales and marketing revenue while it doesn't operate.
Click to expand...
Click to collapse
When you run the ROM update, are you still trying to run the 1.66.131 ROM? If so, you might want to try the 1.52.113 ROM to see if you can at least get your device back.
When the Radio update failed how far did it get into the Radio update, (what percentage?)
I had a similar problem when trying to downgrade, the Radio failed at 12%, (which I was told was a security feature)... either way, what I did was in this...
1.66.131 - Update, (which worked for me)
1.03.00 - Downgrade (which failed at the radio stack and would not boot)
I then went into bootloader, (reset, power, up) and you should see Serial/USB 1.01 screen...
Then put the device in the cradle and ran the 1.52.113 'update' and the device was fine (back to 1.52.113)
I had a similar problem were the upgrade failed part way through updating the Radio stack (after the Erase).
Fortunatly the main ROM had upgraded OK and I simply hard reset and started again.
Some things I have noticed:
1) Never leave the PC unattanded - stop it from going into screen saver
2) Make sure all programs are shut down on the PC - Too much activity causes my USB ActiveSync link to close
3) Close Firewall software - I use ZoneLabs and the upgrade hates it
Just a few things to try
The other thing you can try is performing the ruu when the device is in Bootloader. Press and hold power, the Actio key (in the middle of the Joystick) and soft reset.
Connect your device to the PC and run the ruu update.
That should work.
Where do I get a RUU for iMates? iMates website doesnt have one.
Also the radio stack update fails at the beginning of the erasing part, it is still at 0% when it errors.
The clubimate site does have the RUU for both 1.66.131 and for 1.52.113, goto Tools\Device\iMates\Full Device etc...
Its towards the bottom...
Yes that is the same update that gives me the error when I get to the Radio stack part of the update. It leaves me with a 1.66 rom and a blank radio and protocol version (if you were to look in device information).
??
Did you recently get your device? Did it come with 1.66.131. if not, then this really should have worked; unless there is something actually wrong with your device? Did you possibly put a different ROM on before the 1.66.131 like a TMobile, or MDA or O2 rom, or a 1.60.x derivative?
Also, you could try this....
http://forum.xda-developers.com/viewtopic.php?t=7384&highlight=
This is a link to the ORIGINAL ROM 1.03.00, but this DOES NOT work for me, but it did get as far as erasing the Radio Stack, (maybe if it can erase yours the other updates will be able to continue)....
Upgrade fails during radio upgrade
I had this same problem when I was upgrading my O2 Rom. Now, I have had just about every possible ROM on my system and have had to revert back to the original and before being able to install and upgrade a few of them.
Assuming you have done all of this, I did have success with a phased upgrade. The upgrade executable creates a folder in the temp directory. I moved this folder to my desktop and launched the upgrade program directly from my desktop but each time only putting one rom file in the directory. There are three (One for extender, OS, and Radio) By doing it one ROM at a time I was able to have success.
Just another idea.
Djm
Please excuse my ignorance on this issue but I am new to WM.
I have a vodafone V1605 with WM5 on it, I have obtained the official HTC TyTN WM6 ROM.
1. Can I flash the ROM to WM6 on this device?
2. I have backed up the device and saved the VF settings (MMS, web etc) is there anything else I should do before I attempt to do this?
3. What is the potential the brick the device if something goes wrong? / What issues may I need to be aware of to stop me bricking the device?
Many thanks for any advice.
v1605 cant upgrade
I have a similar situation but dont know how to back up the Vodafone settings. How do you do that? I tried installing the update but as I have read since this will not work on a Vodafone handset. Not too sure exactly what to do or if its a risky move to try...
Any help would be great.
Thanks
samo problem
can i just flash it or no ?
READING and learn BEFORE..........
Perhaps you can beter read this forum. Even better try the WIKI.
Don't do anything if you are not sure.
It took me about 14 days before I even dared to upgrade my radio. Then after a few days I upgrade my OS.
Now I'm almost flashing after 2 or 3 days a new or enhanced version of OS trying out and testing.
It's a fun hobby but read carefully!
Try also - The HTC Guide: Hermes (aka MrVanx's Hermes Upgrade Guide)
http://forum.xda-developers.com/showthread.php?t=299462
hello all's
after read a lot of topic, i want flash my v1605 with official wm6 htc rom.
But i have no ideas with precision "how to all"
somebody can help me?
in a first time, the v1605 must be "supercid" ?
after i could flash the device?
Bensat said:
Now I'm almost flashing after 2 or 3 days a new or enhanced version of OS trying out and testing.
Click to expand...
Click to collapse
That doesn't sound good. Tell us when you've found one that works properly.
V1605 Upgraded
I have upgraded my V1605 using the HTC official ROM.
Use the WIKI - it has loads of useful hints and tips!
I did unlock my device using the Hermes unlocker first (if you follow the instructions this is pretty straight forward).
I then applied the ROM update and it worked without any issues.
To complete I used the HTC operator setup tool to put my Vodafone settings back on the device (MMS, WAP, Web etc).
I now have a WM6 V1605.
So do review the WIKI as I am sure many people state, but after a few days reading and a decision whether to unlock or use HardSPL it is pretty straight forward.
I've update the 1605 few weeks ago without problems.
Follow the wiki and read some thread before, justo to understan what are you doing.
No particular problem in all the procedure.
Now I have superCID, SHAPS ROM 3.54b, and 1.50 radio.
The brik goes faster and much better.
Enjoy
Upgrade v1605 to HTC TyTN WM6 and upgrade radio too
For Users of Vodafone v1605: There is no official upgrade from Vodafone.
This is my current configuration: HTC WM6 official
ROM Version: 3.54.255.3
ROM Date: 07/05/2007
Radio Version: 1.48.00.10
Protocol version: 32.81.7020.20H
ExtRom version: 3.54.255.104
For Vodafone v1605: running official Vodafone WM5
Official HTC Caution:
1.Upgrading the ROM Code erases all of personal data and custom-installed applications from the device. Make sure all of your personal information and data are backed up to your PC via ActiveSync or Windows Mobile Device Center. After updating the ROM, copy the data back to your mobile device and reinstall your applications.
2.Third-party applications may have compatibility issues with Windows Mobile® 6. Please consult with the software developer(s) before upgrading to Windows Mobile® 6.
3.Make sure the remaining battery power is above 50% before performing a ROM upgrade.
4.Before upgrading the ROM, remove the microSD memory card from your device.
5.Do not disconnect the USB cable or start other applications on your PC while the ROM upgrade program is running. Doing so may cause the upgrade program to fail. In the worst situation, your mobile device may fail to boot.
6.The entire ROM upgrade installation process takes about 15-20 minutes. Please wait patiently.
7.When the upgrade has completed, the mobile device will reboot and start installation of certain components automatically. This takes about 3-5 minutes.
8.If you are not familiar with these operations or if you don’t know how to work with your PC, please visit your distributor or contact us for assistance.
9.Note that once the operating system is upgraded to Windows Mobile® 6, it cannot be downgraded to Windows Mobile 5. Consider your options carefully before you upgrade.
10.Users who have a membership with HTC should upgrade via the HTC official website. Upgrades done otherwise, i.e. through non-HTC-authorized channels, are considered illegal. HTC shall not be liable for any damage to the data or the user’s breach of the related laws and regulations.
This is what I suggest as it worked for me.
Download:
1. HTC Europe WM6 official: HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.10.108.exe
http://rapidshare.com/files/46467733....00.10_108.exe
2. Hard SPL7 from: http://www.mrvanx.org/
Instructions:
1. Read this website: ink: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26
2. Go Straight to following: Upgrade SPL to HardSPL v7 (2.10.olipro) Link: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
3. Check list:
• See that your bootloader reads
IPL: 1.04 SPL: 2.30.Olipro
• Your Windows XP should have Microsoft .Net ver 2.0+
• Write down all the MMS, GPRS, servers and portals details, Backup all the contacts and stuff you want.
• Remove the MicroSD card. (Don’t know why)
• Run the HTC TyTn ___108.exe file
• Voila. The v1605 boots to WM6 official HTC version.
• Everything is upgraded. Even the radio to 1.48.00.10 version. No need for separate upgrade.
THANK's a lot
Thanks
Great thanks a lot
V1605 WM6
upgrade v1605 herm200 ipl 1.01 spl 1.09
hi,
i have a pda v1605 vodafone italy ipl 1.01 spl 1.09.so i want install wm6 ( hmm..wm5.2) cause i want my mobile faster and more fresh look..eheh..my question is: do i need install bl first using hardspl7 or can i proceed with the installation of an official vf rom ita??
of course i don't want lose my warranty...
what kind of bl i need? of course i want downgrade in case of assistance need.
thanks in advance
Just to confirm, I have a Vodafone 1605 with 2.30 bootloader. My steps to upgrade were:
1. For neatness I hard reset
2. Sync with Activesync
3. Flash to that latest HardSPL (V7)
4. Flash to Mobile 6 using the HTC release HTC_TYTN_WWE_3.54.255.3_6275_1.48.0.0.10_108.exe
5. It worked
Link for WM6
Just tried this link and its not working, anyone know of another source?
Thanks
Cenick
popeyethedoc said:
For Users of Vodafone v1605: There is no official upgrade from Vodafone.
This is what I suggest as it worked for me.
Download:
1. HTC Europe WM6 official: HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.10.108.exe
http://rapidshare.com/files/46467733....00.10_108.exe
Click to expand...
Click to collapse
Hello guys. I need to ask some detailed information about latest leaked Mango update. I'm very unexperienced Windows Phone user.
I just bought a unbranded (without operator programs-logos) HTC Mozart. I want to flash my Mozart with latest leaked Mango ROM. My phone has a windows version of 7392 NoDo. I just downloaded the RUU exe file. What are the steps of installation? Please tell step by step. Can i jump into bootloader mode or just "connect phone to pc,run zune and run ruu exe?"
Please help me, i'm really unexperienced windows phone user. I had some android phones for 4 years, very experienced android user (even android rom installation) but these operating system is unfamiliar for me. I'm very glad if anybody help me
I searched all windows phone threads but didn't find any guide. What are the steps of installation of Official Mango Update? Please help!
1) make sure you've downloaded the right RUU rom for your phone, or have your phone security unlock
2) power off, press power & vol- buttons to boot, you'll see "security unlocked" at the top if it's unlocked
3) connect your phone to your PC, "serial" on the screen will turn to "USB"(if not, you have to install the windows mobile device center manually)
4) run the RUU on your PC, then the mango goes from here~ enjoy
WARN: MAKE SURE YOUR PHONE DID NOT INSTALL ANY RSPL/HSPL(check it on the same screen, right info is SPL xxxx)
Thanks for your reply I'm really appreciated.
can i install Europe update for unbranded device in Asia?
life25ak said:
can i install Europe update for unbranded device in Asia?
Click to expand...
Click to collapse
You should probably use the Asia ROM.
Hi
I have a htc sorround windows phone from AT&T. It was impossible to upgrade to NODO before, I got error and NODO is not installed. Now I want to upgrade to latest WP7 7.5 (mango). How do I do that with my phone?
I tried to connect to zune, it shows my phone is up to day v7.0 (7008). I tried to do some trick to get update but it doesnt work.
So I stuck with old WP7 and cant upgrade to Mango. Could you please help me? I can up rom or do anything to upgrade this phone.
os version: 7.0.7008.0
FW revision no.: 2250.09.10307.502
HW revision no.: 0003
Radio sofware version: 5.51.09.06_22.30.50.09H
Radio hardware version: A.26.0.D4
Bootloader version: 1.3.2250.7(111288)
Chip SOC version: 2.2.5.0
Thank you
just got AT&T Surround from my friend last night and was crazy like you in upgrading to Mango, but now I have already been to Mango
Belows are what I have done with my phone and you can follow at your own risks
1- Download this original Nodo rom (7390) http://www.megaupload.com/?d=3197JKWZ
2- Bring the phone into bootloader mode (Shut down, Volume down+Power button). Install the downloaded .exe file with Admin previlege on Windows 7 when the phone is already in bootloader mode
3- Open Zune with Internet connect, It will report that you are up to date although you are on 7390
4- On the phone, remove ticks on Settings/Cellular/Data. Turn off Wifi. Tick to "Use cellular data to find update" in Phone Update
5- On Zune, click to any other rows, ie. "Do more on the web" above Updates
6- On Zune, back to Updates. During it is checking, turn off all internet connections on your PC (Wifi, LAN...). You may have 7 seconds to do these
7- Right after turning off all connections on PC, you may have 5 seconds to turn on Wifi on your phone (it already had a known Wifi and you should make this setting ready first)
8- On Zune and phone, Update will appear. Turn on Internet connection on PC, then click Update on Zune
9- It will bring you to 7392, then 74.., then 7720 (Mango)
10- Done
I have done successfully with Vietnam Viettel SIM inside
Actually, I don't know why we need such a crazy trick to keep our phone up-to-date. Like Iphone, all trends is to mainstream users who don't need to deeply understand such technology tricks. Iphone is really easyto use for any people, and its update process is also really simple (plug the cable and Itunes do it for you or now is OTA)
Windows phone also have objectives to bring easy to use to users but with such trick above, i don't think is can be called "easy to use". I myself have read a lot about this "cable trick to upgrade" but fails a lot
Good luck !!!
Strange. Every one of my updates; pre NoDo, NoDo, Security, Mango Beta, Mango Beta2, Mango, Mango Beta Cleanup and two HTC Firmware updates, have gone smooth as silk. Maybe users should not try to undermine the system that Microsoft went through a lot of effort to create.
DFT Mango ROM
I mucked around with my surround trying to do the legit upgrade path but keep the chevron unlock and could not get it to go I was lucky enough that my surround supported the HSPL/RSPL found in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
once that was installed I was able to flash the DFT Mango ROM in this thread
http://forum.xda-developers.com/showthread.php?t=1255129
Now I have my surround on mango and unlocked. Everything works perfectly the only thing I noticed is that my reception always shows 1 bar even though my data is fine, and I did several test calls and everyone can hear me fine. All in all I am happy and the flashing is way faster the going to mango via the upgrade path.
[DFT Freedom ROM] Mondrian mango 7720 V2 version
Updates:
20 Langs in one rom USA_ENG_FRA_ITA_GER_ESN_NLD_DAN_FIN_NOR_SVE_PTB_ PTG_RUS_ELL_HUN_CSY_PLK_JPN_KOR
Replace RUU_Mondrian_S_Cingular_US_4.03.502.00_5.69.09.05a_22.50.50_RELEASE new driver
Replace some of the new HTC XAP (from Titan ROM or Radar ROM or Market )
Open Internet sharing
Fully unlock with IE download XAP , can be immediately downloaded and install it , see picture under
XAP unlimited installation, dozens of XAP than can be installed, I installed more than 30 XAP which download from the market, fixed market XAP update/install issue from DFT Freedom 7720 version.
ROM built-in HTC Deck , Tango, TouchXplorer, Registry Editor, in the pass XAP only can be installed via computer, DFT developed DFTInstall.exe so now all the XAP can be build-into custom ROM , of course need to see will be over the size of 512, this tool is strictly prohibited any theft, unauthorized use exception.
Important Note
1. Before doing anything, make sure you have more than 50% battery!
2. You must have RSPL / HSPL installed on your device, download RSPL / HSPL see this http://www.darkforcesteam.com.cn ... & extra = page% 3D1
3. Supported Operating Systems: Windows XP, Windows Vista, Windows 7.
Disclaimer
This product is free of charge, at your own risk. We do not have any conflict, fault, or damage caused by the process of responsibility. Implied or otherwise, if you agree that any use of the product warranty. Did not find the problem, several different devices simultaneously to test this product, your experience may vary.
Products used for commercial purposes is strictly prohibited, and prohibited xda.cn & wpxap forum and reproduced with the use of intellectual ROM
For the protection of the DFT our official website and XDA - developers.com, it is not allowed within 5 days reproduced in this ROM, the column name well-known owners of this forum the forum three days after the group can reproduced without the application after five days free reproduced, reprinted, be sure to indicate the DFT produced the original post and add links
# Strongly prohibit any use made of the DFT ROM resources,
20 language versions download here
Code:
Password: 11/08/2011 @ DFT
Dark Forces Team Special thanks to TouchXplorer & Registry Editor author Julien Schapman allows us to these two software built into ROM.
Official DFT site (Chinese)
DarkForcesTeam Nov,2011
http://www.youtube.com/watch?v=KyTniK4AXUE&feature=channel_video_title
invalid password
Thanks a lot. I'll test.
@agushaha: have a space before 11/08/2011 @ DFT.
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
i cant open the file....
do you lnow why?????
nacho685 said:
i cant open the file....
do you lnow why?????
Click to expand...
Click to collapse
Chances are that you put the password in incorrectly
Thank's it's work
bmamo said:
my current OS version is 7.10.7720.68
my device is an at&t surround
can I install this on my device? i have not yet installed hspl / rspl.
Click to expand...
Click to collapse
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
hi guys,
I can't unzip. I have the latest winrar. I tried the password with and without the first space...
space before but no space between then.
perfect!
password is:
" 11/08/[email protected]" (without the ")
thanks
Advanced Config Not Working
Not sure if its a bug but it appears advanced config does not work with this rom.
I miss my custom grey theme already
NVM Reboot fixed it
My attempt at a tutorial
jesusodin said:
I also would like to try this. Is there a tutorial on how to get this installed??. Got the same OS version.
Thxs
Click to expand...
Click to collapse
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
HTC update?
Got this "update" last night, does anybody know what it does???
Don't update. Your phone will become a brick if you update.
I tested. There are a few minor bugs eg: Errors column waves 3G,misspelled in the About
Model: HTC Mondrian
Carrier: HTC Sunnound T8788
Thank so much.
hello
When you unzip the file gives error unknown format or damaged
regards
rob243 said:
Here is my attempt at a tutorial
Step 1: take anything important off your phone (Pictures Videos Music Etc) Because installing all this stuff will erase your phone completely
Step 2: Go and read the first post in this thread
http://forum.xda-developers.com/showthread.php?t=1195647
Once you have read it, READ IT AGAIN!, because if you flash that to your phone and its not compatible you will BRICK YOUR PHONE.
Once you are sure that your phone is compatible with the RSPL/HSPL download it and use the included tools to flash it to your phone. You will need to put your phone in bootloader mode to install that. To do this you will turn the phone off completely then press power + the volume down button to get to your boot loader screen it will be red green blue and white.
Connect your phone start the RSPL app and follow the steps to the letter, once this is down download the rom posted in this thread.
Step 3: Flash the rom posted in this thread by using the same steps. Power off the phone, then press power + volume down button when you see the bootloader start the flashing process. You will get a progress bar let it go through until the phone reboots.
Step 4: Enjoy a truly amazing rom on your Surrond, thank you so much DFT.
Click to expand...
Click to collapse
that thread says this:
WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke.
MORE INFORMATION HERE
--------
I have mango. therefore i understand i cannot change the rom am i right?
on the 3 colour screen i get the following:
PD26100 SS-BC (4K)
SPL-4.3.2250.0(128976) MNG
MicroP(LED) 0x09
TOUCH C1(v69)
Am I stuck on Mango?
Downgrade????
this is correct do not use the rspl/hspl if the numbers for the versions do not match
I had originally installed mango using the disconnect trick what I needed to do to install this was use the stock rom for my phone/provider to downgrade first for me it was Telus my provider, I found the rom here to put me back to pre-nodo like the phone was fresh out of the box.
THEN I was able to do the rspl/hspl then the DFT rom.
Also check under your battery for the model ID and verify its compatible with those posted in the RSPL/HSPL thread the model ID on my phone is PD26110 I can confirm with a pre-nodo rom and that model ID the rspl/hspl and the dft rom work perfectly
hello
someone upload the rom to another server and that gives me this error or damaged
regards