URGENT: Need Help, My phone won't load... - Touch Pro, Fuze ROM Development

After trying to rebuild a ROM (NAFT's v3.0) by adding rilphone.dll file to it. Everything went well when I did it with NAFT's v2.3, but when I tried it on v3.0, my phone just stop at the AT&T World Phone screen... I did a hard reset by Pressing Volume Down + Enter + soft reset, but it still stuck at the AT&T screen.
I can still go into the boot screen, but I dont' know what I can do now.
Please help.

IS there a way to load a new ROM from the Bootscreen?

Load the ROM NBH file to your SD Card under the name RAPHIMG.NBH
Enter the Boot Screen and it should start Flashing the ROM.

Enter bootloader, plug the usb cord in, wait for usb to show up on the tri color screen, flash different rom.
Alternatively, you could enter bootloader and follow the directions for flashing from SD card.
Search for it.
Next reply will probably be by someone telling you to search for these questions first, and then someone will make a comment about your somewhat simple question for someone with your post count, and then a mod will say 'redundant thread closed'.
Good luck.

Copy a ROM to your root of your SD card /Storage Card. Rename the ROM file RAPHIMG.nbh
Then go to the bootloader. Should ask you to flash the ROM. Press the power button to begin flashing.
You could also try flashing the Stock ROM that came with you device via your pc with your device in the bootloader. Hook your device up to your pc in the bootloader it will say Serial or USB. If it's USB you should be able to flash as normal.

just like fox, ATW and navy said..
whenever u run into an issue like that..flash from ur SD
80% of the time it works.
ive been in ur situation before..its pretty ****ty..but u can bounce back real quick
Late,
Jstar

I follow the first advice... put it in boot screen and reflash the new ROM... hope this will work, crossing my fingers... Thanks guys for the very quick reply... it's flashing as we speak.

It seems to be working now... thanks guys.
Got so scared... I must give up the Call Display project... sounds too dangerous

same reason why i stopped messsing with the dialers on M2D
one to many things went wrong and i gave that up real quick..
but what ive learned..over time..
theres always a FIX..just gotta look for it.
Late,
Jstar

JstarLuvsTina said:
same reason why i stopped messsing with the dialers on M2D
one to many things went wrong and i gave that up real quick..
but what ive learned..over time..
theres always a FIX..just gotta look for it.
Late,
Jstar
Click to expand...
Click to collapse
It wasn't easy to search went you find out that you've just lost $500 because of a stupid step you did
However, I tried to manage myself to search through the forum for the words "Brick" "Unbrick" and "Flash ROM through Storage Card"... and I thought the world was ending, so I go for the last hope by posting a help thread
Thank and I love you all

Related

bricked

Hey guys, I havnt had a issue with my phone untill now, i installed energy rom a few days ago and i havnt had a issue however my ever my phone froze on me earlier so i poped out the battery and put it back in now it wont go past the splash screen, so ive tried to reinstall the at&t original rom and all and now i get the at&t splash but i get no where it just keeps reseting
Please Help!
sleepyzx said:
Hey guys, I havnt had a issue with my phone untill now, i installed energy rom a few days ago and i havnt had a issue however my ever my phone froze on me earlier so i poped out the battery and put it back in now it wont go past the splash screen, so ive tried to reinstall the at&t original rom and all and now i get the at&t splash but i get no where it just keeps reseting
Please Help!
Click to expand...
Click to collapse
Press and Hold the volume down key then push the reset button. When you see the tricolored screen, you can re-flash to a new ROM from there... just by launching a new flash.
thanks for responding yea i tried that i even reinstalled the energy rom but it still wont go past the splash
try flashing from you sd card, search flashing from sd card or something like that. I belive you have to format it in 32 mode and then take the rom "raphimg.nbh"(not exact spelling or proper spelling I beleive some of that has to be in capitals) sorry to here your phone is down. Try that and post your results.
Format the card FAT32. Place a rom on the card & rename the rom to RAPHIMG.nbh.
Put the SD Card in the slot & hold volume down & reset. Press the power button when instructed to do so on the screen.
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
sleepyzx said:
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
Click to expand...
Click to collapse
Try a different microSD. Also be sure that you did a full format not a quick format. I had an issue with a few microSD cards, but I like my 2GB PNY for flashing my phone via microSD.
I had the exact same issue after flashing the latest energy 3 rom
heres what i did
1. Reflashed Hard SPL
2. Flashed a stock HTC ROM, i managed to do this from my PC by manually entering the bootloader.
3. Did a hard reset
4. Let phone complete initial setup
5. Reflashed Hard SPL - Read somewhere that sock roms may overwrite \ partially overwrite Hard SPL
6. Flashed an Energy 2 ROM (only cause i wanted to check something out in it anyway)
So far its all looking good
sleepyzx said:
thanks guys for ur help but i keep getting no image file then it says serial i formated the card and everything
Click to expand...
Click to collapse
It happened for me with 2GB microSD. But magically after I did checkdisk/scandisk, the image found
shearsey said:
I had the exact same issue after flashing the latest energy 3 rom
heres what i did
1. Reflashed Hard SPL
2. Flashed a stock HTC ROM, i managed to do this from my PC by manually entering the bootloader.
3. Did a hard reset
4. Let phone complete initial setup
5. Reflashed Hard SPL - Read somewhere that sock roms may overwrite \ partially overwrite Hard SPL
6. Flashed an Energy 2 ROM (only cause i wanted to check something out in it anyway)
So far its all looking good
Click to expand...
Click to collapse
This look like some dangerous steps
Let me ask you guys, which version of Energy are you guys using?
monx® said:
It happened for me with 2GB microSD. But magically after I did checkdisk/scandisk, the image found
Click to expand...
Click to collapse
good to see you back, ive had similar issues with a my 16GB and 8GB aswell a few times i think its due to some corruption beeing made to the filesystem when we disconnect it to soon form the pc (using it as disc-drive) thats kinda the same thing that happens when u disconnect a usb-harddrive in windows while its in use by windows and tries to connect it with linux.
a really good disc-repair tool i stumbled upon is located here
http://www.cgsecurity.org/wiki/TestDisk
and just to make sure its done right as gsleon3 said, do as he said and make sure that you take the you take the ruu_signed.nbh and rename that to raphimg.nbh (not sure if it has to be in CAPS, im pretty sure ive done it like this RAPHimg.nbh lots of time)
...monx, it would be great to have you back cooking wonderful stew
cheers
@jonteponte
thanks for the tool. it is not case-sensitive but name-sensitive
i'm not going anywhere. always around
-freeheel is freedom, tried, i love it
monx® said:
@jonteponte
thanks for the tool. it is not case-sensitive but name-sensitive
i'm not going anywhere. always around
-freeheel is freedom, tried, i love it
Click to expand...
Click to collapse
@monx® you're welcome
if you ever come to the northern part of sweden just let me know and ill take you on trip, i have several pairs of skis and boots aswell =)

[Q] Hd2 freezes at startup, what to do?

Yesterday i put my hd2 in my pocket without locking the screen. when i heard it surfing around the menues i took it back up and tried to take it back to homescreen. As many times before the phone refused to respond so i took out the battery. But when powering it back on the **** wont pass the htc startup-screen!
I have read around this forum quite alot now and i have done hard reset a million times, i have installed an original updated rom from htc`s site. When this didn`t work i installed hspl3, Artemis v270 NOR and RADIO_2.07.51.22_2. And it still wont start!
Im getting quite sick of experimenting, so i`d be really happy if any of you smartguys could help me
Pelle-pirk said:
Yesterday i put my hd2 in my pocket without locking the screen. when i heard it surfing around the menues i took it back up and tried to take it back to homescreen. As many times before the phone refused to respond so i took out the battery. But when powering it back on the **** wont pass the htc startup-screen!
I have read around this forum quite alot now and i have done hard reset a million times, i have installed an original updated rom from htc`s site. When this didn`t work i installed hspl3, Artemis v270 NOR and RADIO_2.07.51.22_2. And it still wont start!
Im getting quite sick of experimenting, so i`d be really happy if any of you smartguys could help me
Click to expand...
Click to collapse
Flash a radio that does not have ".51" in the name. Flash a radio that has ".50" instead. ***Make sure the ".50" radio is 2.06+ (don't flash anything below 2.06.50.xx).
Okay, thanks for your reply But i still cant make it work, are you sure its the radio causing this problem? I`ve now tried RADIO_2.10.50.28_2 (this is the only one with "50" in it among the recomended radios in the artemis thread...) , RADIO_2.12.50.02_2 and the mentioned above RADIO_2.07.51.22_2.7z.
Should i just keep going?
One more thing. When 2.12 and 2.10 was installed, the phone restarted by its self after about 30-60 sec on htc bootscreen. if that means anything?
Pelle-pirk said:
Okay, thanks for your reply But i still cant make it work, are you sure its the radio causing this problem? I`ve now tried RADIO_2.10.50.28_2 (this is the only one with "50" in it among the recomended radios in the artemis thread...) , RADIO_2.12.50.02_2 and the mentioned above RADIO_2.07.51.22_2.7z.
Should i just keep going?
One more thing. When 2.12 and 2.10 was installed, the phone restarted by its self after about 30-60 sec on htc bootscreen. if that means anything?
Click to expand...
Click to collapse
It's usually the radio that's the problem -- if your phone gets stuck on the bootscreen.
I'm not sure what else might be the problem.
Just in case, try this: Task 29, flash a .50 radio, flash a stock ROM (via USB), hard-reset.
If that fails, I don't know what else to say...
i tried the task 29 witout luck A couple more weird things though.. when i try to install a rom from the memory card, the bootloader doesn`t start the installation. I just says "serial". And Yes its formated with fat32 and im sure im doing it right. The other thing is that the phone starts by itself about 60sec after plugging in the charger.. i`m guessing this have to be a hardware problem. might be the usb connector as many seem to have problems with.
I`ve now put in a stock spl and will send it back for repair tomorrow.
Dammit, hspl i still there. Is the only way to remvoe it by using the sd-card? then i might be fu..ed regarding the warranty :S
Pelle-pirk said:
Dammit, hspl i still there. Is the only way to remvoe it by using the sd-card? then i might be fu..ed regarding the warranty :S
Click to expand...
Click to collapse
I think so. Someone with more experience might be able to provide a more confident answer.
Are you sure you're renaming the ROM as "LEOIMG.nbh" (no quotes) and putting it in the root of the SD-card?
Pelle-pirk said:
i tried the task 29 witout luck A couple more weird things though.. when i try to install a rom from the memory card, the bootloader doesn`t start the installation. I just says "serial". And Yes its formated with fat32 and im sure im doing it right. The other thing is that the phone starts by itself about 60sec after plugging in the charger.. i`m guessing this have to be a hardware problem. might be the usb connector as many seem to have problems with.
I`ve now put in a stock spl and will send it back for repair tomorrow.
Click to expand...
Click to collapse
Hello dude!
Try using a microSD smaller than 8gb and formated with FAT32 (it's a known fact that 16gb microSD does not work for flashing.....).
If you want to remove the HSPL there is 2 ways:
1 - Flash a stockROM via SDcard, like you are trying to do.
OR
2 - Use the HSPL2 program to revert to the original SPL state.
If you could enter the bootloader, probably your phone does not need any special repairs.. Anyway.......
Try using a smaller SDcard to flash the radio and the ROM again. You could also try flashing via USB/PC.....
Do not forget to redownload the ROM, it could be a "bad download".
For more info take a look here:
http://forum.xda-developers.com/showthread.php?t=609477 --> Flashing guide for noobs
http://forum.xda-developers.com/showthread.php?t=611433 --> HSPL thread
Good luck!!
maybe a fix
Pelle-pirk said:
Yesterday i put my hd2 in my pocket without locking the screen. when i heard it surfing around the menues i took it back up and tried to take it back to homescreen. As many times before the phone refused to respond so i took out the battery. But when powering it back on the **** wont pass the htc startup-screen!
I have read around this forum quite alot now and i have done hard reset a million times, i have installed an original updated rom from htc`s site. When this didn`t work i installed hspl3, Artemis v270 NOR and RADIO_2.07.51.22_2. And it still wont start!
Im getting quite sick of experimenting, so i`d be really happy if any of you smartguys could help me
Click to expand...
Click to collapse
hello guys,
someone at htcedia posted this fixes:
1) Install you HSPL.
2) Install your cooked rom.
3) Upgrade your radio. (Leo_RADIO_2.10.50.26)
4) Do Hard reset. (Hold Vol up and down also end call button) then press (Red reset button under back cover next to battery)
Fixes Freezing on HTC bootup screen.
and for me, when i remove the micro sd card the phone bootup but when the micro sd card is in the phone it wont.
so try to remove the micro sd card then reset a hard or soft reset ur device, keep ur micro sd out until ur r completely loaded, then put ur sd card back in the phone.

[Q] (probably) big problem with hero

Hi guys!
i just wanted to ask you a question: yesterday i tried to install the floyo rom but i guess something went wrong..after installing the rom via rom manager during the first boot the phone got stuck loading the new rom..it keeps showing "floyo" on the screen but nothing happens...it just keeps loading and loading and loading....is there any way i can boot the phone using the factory presets or something?
thx a lot
HI,
You're not in the right forum section to ask this, but anyway.
That problem could occur time to time, in fact, I had it several times. But don't need to worry, if you're phone is still booting, that's not a big problem then.
What you can do is reflash the rom like you did the first time.
But first, May I suggest you to check if you're phone is actually stock by using logcat ? Because the first boot can be quite long (in my case, it takes around 10~12 min). To do so, use your usb cable, go to command prompt and type
adb logcat
if there are things on the screen, and if that screen is moving, then just be patient...
LTourist said:
HI,
You're not in the right forum section to ask this, but anyway.
That problem could occur time to time, in fact, I had it several times. But don't need to worry, if you're phone is still booting, that's not a big problem then.
What you can do is reflash the rom like you did the first time.
But first, May I suggest you to check if you're phone is actually stock by using logcat ? Because the first boot can be quite long (in my case, it takes around 10~12 min). To do so, use your usb cable, go to command prompt and type
adb logcat
if there are things on the screen, and if that screen is moving, then just be patient...
Click to expand...
Click to collapse
ops!!! sorry about that!! what's the right section?
anyway....thx for your answer but i' ve been veeeeeeeery patient...i've waited for more than an hour but nothing happend
i'd like to reflash it but i don't how to do that since i cannot even access my home screen!! ah and if i connect the usb cable nothing happens..i just see this thing loading stuff.... bit frustrating
eyah78 said:
ops!!! sorry about that!! what's the right section?
anyway....thx for your answer but i' ve been veeeeeeeery patient...i've waited for more than an hour but nothing happend
i'd like to reflash it but i don't how to do that since i cannot even access my home screen!! ah and if i connect the usb cable nothing happens..i just see this thing loading stuff.... bit frustrating
Click to expand...
Click to collapse
OK. Open the back of your phone, remove the battery.
Replace the battery and you can try to boot your phone again.
Or you can directly boot into recovery. From this place you have choice to rewipe everything and reflash the rom. Or you can just load your nandroid backup; I assume you made one, did you?
boot your phone with the home button pressed(so press the home key, press hang up(so he will start) and after 10 seconds or so you're in the recovery menu
As above really..
Remove battery, then turn back on holding power and the home button.
This should bring you to the recovery ROM, in their, you can wipe your phone clean, and re flash a new ROM.
If you want to put a new ROM on your SD, you can mount the SD Via USB from the Recovery Menu, or just remove the SD and put in a card reader.
Then wipe/flash new ROM.
From your first post im guessing you tried to install Floyo? http://forum.xda-developers.com/showthread.php?t=784689&page=146 ?
eyah78 said:
Hi guys!
i just wanted to ask you a question: yesterday i tried to install the floyo rom but i guess something went wrong..after installing the rom via rom manager during the first boot the phone got stuck loading the new rom..it keeps showing "floyo" on the screen but nothing happens...it just keeps loading and loading and loading....is there any way i can boot the phone using the factory presets or something?
thx a lot
Click to expand...
Click to collapse
Just reflash the rom, but wipe everything..; then, Everything will be fine!
guys!! thk u all for your answers
all is fine now! removed battery reflashed original rom and then reflashed floyo...sweeeet ^_^
in case it didnt show that was my first attempt to install a custom rom and when the phone got stuck i kinda freaked out .....don't know what i did wrong the first time though.... anyway...thanks

O my god what do i do now! Please this i really need your help

IT IS BOOT LOOPING
BUT WHEN BOOTING IT SAYS "STICK TOGETHER" AND UNDERNEATH IT SAYS NOT "TEST ONLY NOT FOR SALE" I GUESS I FLASHED THE WRONG ROM OR SOMETHING
AND IT'S LIKE THE BATTERY DOESN'T WORK OR SOMETHING, IT MUST BE PLUGGED TO TURN ON
I TRIED BOOTLOADER AND PC DOESN'T RECOGNIZE IT
so in the end can someone guide me on how to flash it back to stock rom?
I already downloaded the stock rom, I just need some more instructions
Thank you so much in advance, this is really stressing me out and I am about to give this as a gift too
Again, thank you and please give some advice
A new hacker said:
IT IS BOOT LOOPING
BUT WHEN BOOTING IT SAYS "STICK TOGETHER" AND UNDERNEATH IT SAYS NOT "TEST ONLY NOT FOR SALE" I GUESS I FLASHED THE WRONG ROM OR SOMETHING
AND IT'S LIKE THE BATTERY DOESN'T WORK OR SOMETHING, IT MUST BE PLUGGED TO TURN ON
I TRIED BOOTLOADER AND PC DOESN'T RECOGNIZE IT
so in the end can someone guide me on how to flash it back to stock rom?
I already downloaded the stock rom, I just need some more instructions
Thank you so much in advance, this is really stressing me out and I am about to give this as a gift too
Again, thank you and please give some advice
Click to expand...
Click to collapse
take out your SD card and put it in a card reader on your PC,
take the stock ROM and make sure you name it LEOIMG.NBH
move LEOIMG.NBH to the root of your SD card (not in any folder)
put your SD card in the phone, hold the vol-down button and press power (same time), it should ask you about flashing the ROM, hit power to flash the stock ROM.
orangekid said:
take out your SD card and put it in a card reader on your PC,
take the stock ROM and make sure you name it LEOIMG.NBH
move LEOIMG.NBH to the root of your SD card (not in any folder)
put your SD card in the phone, hold the vol-down button and press power (same time), it should ask you about flashing the ROM, hit power to flash the stock ROM.
Click to expand...
Click to collapse
It didn't work, I've moved it to the root of the memory card, vol down and power. It says Loading... then on top it says "00058002" I shall research more on this. Thank you for being the only one who replied, bless your soul
You flashed a MFG SPL test ROM...from which there is no escape. Basically you are SOL unless you send your device back to HTC for a warranty repair.
http://forum.xda-developers.com/showthread.php?t=668347
and
http://forum.xda-developers.com/showthread.php?t=655653
These might help. There's alot of reading to do.
Do you have a T-Mobile USA HD2?
If so, and these links don't help, try looking further in the TMOUS HD2 Fora
If you can't get out of SPL 2.02, the ROM in my sig is not watermarked, and works quite well. If you can't escape 2.02, this ROM is your only option
How much is it to get replaced/repaired by HTC? Not T-Mobile because it's out of contract the day I bought it. (Unless they have a cheaper plan of course *wink)
Thanks hugggs, I've tried that before, but now it's still dead. Thanks though. I guess you can help me by scouting your local craigslist for an EVO or HD2, buy it, I'll paypal you and you can send me the phone. lol in my dreams
bout a hundred and forty dollars for a new mainboard. (which is what they will say they had to replace).
read THIS thread for a solution. theres a version of hspl that supports spl 2.02 on page 7
It's not 2.02 it's 2.00.1000
I guess I would send it back to repair, I flashed a test rom so it should be official right? The radio I don't think it's been tinkered with (or all radios are official)

Trying to go back to Stock P769

as
surenzxx said:
I recently installed CyanogenMod with the Unlock Bootloader for noobs and I noticed the internal SD wasn't mounted. So I tried to flash an ICS ROM to see if it would work but it didn't. I was stuck at the boot screen. I tried restoring an ICS CWM backup and a JB backup but it didn't work. Currently, I have a flashed JB backup with a messed up touchscreen (because of the way I unlocked the boot-loader). It won't boot and I don't know how I can install the stock ROM. I really just want my phone to work at this point. I don't know if there's any way to use the offline method to flash a .kdz since I can't access android. I tried hard resetting, but when I do it starts up Clock Work Mod which I believe happens because of the way I unlocked boot-loader.
I'm trying to use this guide to fix it using SW upgrade. I did find a .bin and .fls which i'm downloading right now.
If anyone could help or give some advice that would be great. I really just want to use my phone, I don't care about flashing a custom ROM right now. As long as my phone works, I'll be happy.
Click to expand...
Click to collapse
Let me know if this works for you! Also you can do the offline fix just as long as you can get into S/W Upgrade mode. But I am curious to see if you can use the bin/fls files tool that you mentioned to get your phone working again.
as
surenzxx said:
Thanks for the reply! I'm planning on trying this method out tomorrow and ,if you don't mind, could you please elaborate on how I can do the offline fix with S/W Upgrade mode? I'll check back on the forum tomorrow!
Click to expand...
Click to collapse
Well just get your phone into S/W Upgrade mode and follow this tutorial. Getting into S/W Upgrade:
1. Get stock ROM here.
2. Turn off your phone
3. Press and hold the vol + button while inserting USB to computer
4. Keep holding the vol + until you see the S/W upgrade mode
5. Flash ROM with tutorial mentioned above.
Good Luck!
as
surenzxx said:
Isn't that just an infobank of all the KDZs? I'm pretty new, but can you flash a kdz with the offline method? To clarify, I was asking how to flash the kdz with the offline method in S/W upgrade mode. So ROMs/KDZs are essentially the same, right?
Edit: I read everything over again and realized what KDZs really are. I'm just wondering now if I could just hard reset in some other way because the LG Update Tool doesn't recognize my phone even though I see all the drivers. It's stuck at 15%.
Edit 2: I tried the method I suggested and it resulted with "Magic number does not concide".
So I'm stuck here with a phone that is stuck in bootloop, and has CWM installed. Can anyone help?
Click to expand...
Click to collapse
alright, this is all from memory but the offline flash didnt work as well for me when stuck in weird bootloops.
Step one-going back to online flash---->
A---
the easiest way i found was to go to C:/windows/system32/drivers/ect/hosts
right click>open with notepad
there should be two lines at the bottom
"127.0.0.1 csmg.lgmobile.com
127.0.0.1 csmgdl.lgmobile.com"
i would cut them out and paste them in a text doc in the same folder for reference later...
but either way you should remove them from the hosts file and save
B----
Make sure your small server is closed! once you minimize it it should go down to your status bar (shttps)
Step two-LGMS---->
make sure you have LG mobile support installed or install it.
open lg mobile support
install needed drivers for your phone
power your phone off/remove the battery
put battery back in
connect it to your computer holding down the volume up button
S/W UPDATE mode should pop up, if it doesn't preform and hardreset and try again til it works (it will)
then in the top right corner there should be a button or two click them both until you see
"restore update" or Update restore or something to that effect
select that
and let it ride man
i got my phone ****ed many times and just had to keep redoing this until it worked. if your bootloader is truely unlocked you can probably go through all that again and get CM10 working, i did but im still working through kinks.....
GOOD LUCK feel free to ask any more Q's about this process if you run into any problems
as
surenzxx said:
Hello! Sorry for the late reply. Before I start, do you mean LG Mobile Support form when I unlocked the boot-loader, if not could you provide a link to it? And by the way, when I tried hard resetting, the phone sent me back to CWM, any ideas why?
I was reading the CM10.2 notes yesterday and I realized there isn't supposed to be an internal SD card showing up when you plug in your phone to your PC. So I did tried fixing what wasn't broke.
Anyway, thanks for the info!
Click to expand...
Click to collapse
that could work, but i just downloaded the LG Mobile Support that i found from a google search. im pretty sure it was just from lg's website
GOOD LUCK
was your phone off before you hit the vol up and home, then clicked power for three-five seconds?
CROSSFREEZE said:
that could work, but i just downloaded the LG Mobile Support that i found from a google search. im pretty sure it was just from lg's website
GOOD LUCK
was your phone off before you hit the vol up and home, then clicked power for three-five seconds?
Click to expand...
Click to collapse
Such a late reply, sorry! I did nothing. Before you replied I flashed CM10.2 but never bothered to boot up my phone. Preparing to connect my phone to my comp, I couldn't start CWM so I figured " I'll just leave my phone plugged in for a few hours." Two hours later, my phone has a blank screen, i'm thinking "This shouldn't be blank? What the hell?." I pressed the power button and was greeted with Cid. I screamed out loud: "**** yeah!"
If people have the same problem as me all I did was: Reflash my my phone with 10.1, stock, 10.1 again, and then 10.2. I did that, only that.
What's funny is that I never checked to see if my phone was working after I flashed CM10.2. :silly:
Can't wait for Kit-Kat. Thank you for keeping up with my post, CROSSFREEZE I appreciate it!
Edit: I might submit a really specific and simplified version of the "Unlock Bootloader for Noobs P769" for the take of contributing.
surenzxx said:
Edit: I might submit a really specific and simplified version of the "Unlock Bootloader for Noobs P769" for the take of contributing.
Click to expand...
Click to collapse
love that idea, theres al;ot of reading i skimmed it and watched the video and after skippiing half the steps it worked for me but there was alot of messed up stuff to fix

Categories

Resources