Dear Community, Dear Experts, Dear Gurus ,
I am hoping for your help. Unfortuntately the Speaker in my HTC TyTn died
and I need to send back the TYTN to the service center in order to get most likely the speaker replaced ( dead ).
Here my isue:
I want to flash the original stock rom, which is:
RUU_Hermes_1.18.257.2_1.18.257.106_1.03.03.10_Qtek_GER_Ship.exe
I have running now and downgraded from WM6 to WM5:
HTC_BOOT HERM200 IPL-1.04 SPL-2.10.Olipro ->>> not OK :-(
ROM HTC German QTEK_102 1.18.257.2 05/30/06 ->>> OK
EXTROM 1.18.257.106 ->>> OK
RadioRom 1.41.00.10 ->>> not OK :-(
Protocol 32.34.7010.01H ->>> OK
OS Build 14955.2.3.0 ->>> OK
AKU 2.3 ->>> OK
The issue is now, how can I restore the original bootloader ? I can only
flash the rom with the RUUWrapper, the result of flashing the original stock
rom is then, that I am still stuck with the modified bootloader and a corrupted
radio rom. Radio Rom was "fixed" by me by flashing the latest version.
If I would try to use the original flasher I would always get an Update Error [260].
So what can I do to resotre the HTC TyTn to its original status, so that the warranty is not voided ... original stock bootloader, radio rom image and so on.
Thanks a lot and hoping for your support, since I am realy lost here.
Sbrani
grab sspl (soft spl) and use that to flash a stock bootloader only.
as far as i know you cannot downgrade the radio due to it being bootloader 0108 variant, but not having a hermes i might be wrong
You can restore the original SPL bootloader by using SSPL but you will not be able to downgrade the Radio as the original has HTC_BOOT 0106.
You have already checked these guys that they haven't released an update?
First of all, thanks a lot for replying, but still the question is, how I can get rid of the HERM200 IPL-1.04 SPL-2.10.Olipro Bootloader. I would need to downgrade once again to the original HTC bootlader 106. As long as I have the other one, I will always end up, with a non working radio rom, since this stone old radio rom is not compatible with the new "IPL-1.04 SPL-2.10" bootlader. Any further Ideas ? Anyway the sspl (soft spl) did the trick and was able to flash orignal rom, but unfortunately with the same result, still not the original bootloader and the radio rom is now again corrupted :-(.
The bootloader hindering you from downgrading to the original radio is not the IPL/SPL combo but instead the built-in bootloader of the radio itself. Read more in the Wiki.
To put back your original SPL loader, use NBHextract to extract the SPL image from the ROM update file you used to downgrade the other bits in your phone, then use NBHgen to create an update file containing only the SPL and then use SSPL for the update.
Hey great support here ! Finally I also managed to restore the original bootloader, which is HERM200 IPL-1.00 HERM200 SPL-1.04. Now I only have to get the original radio rom running. Thanks a lot, seems that I can think now of actually reaching the final goal. I learned a lot. Great community !!!
You're missing the point about the radio. Let me repeat:
You can't install the original radio ROM. You will brick the phone!
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108, but not 0106. Your original radio has 0106, so if you flash it you'll get a NoGSM error and a bricked phone.
about downgrading to WM5
pof said:
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108,
Click to expand...
Click to collapse
Well Pof, abubasim, Couldn’t sbrani downgrade the radio with custom RUU to his own original Rom Radio first?? (almost the official known Radio is 1.38) then following your description. At that time he gone have WM5 Rom and same Radio as original, I just wondering if u can du like this
Don't worry guys I bricked several times now the radio rom . It's just that it is then extra work. I will keep you updated, as soon I have news, for now I can't see anymore those "upgrading" tools. I will try it again tomorrow.
you where able to unbrick because you had HardSPL, but now you have SPL-1.04 which will not allow you to flash unsigned code.
By the way, did anybody have experience with HTC or better to say HTC Serivce Providers. As far as I know I have to send it to Teleservice in Germany. Are they realy checking the installed rom ? Thanks for the info.
Ok, I made it finally, I will post exactly how I did it, maybe it helps someone who will be in the same situation.
Thanks once again, great SUPPORT !!
Sure you'd HELP me!
Hi there,
Hi Sbrani, I'm in the exactly same situation: HTC TYTN (Orange France) without speaker... and needing to go to french HTC support.
I upgraded both ROM and Radio to the latest versions following step by step the tutorial found here and on mr (???) on its website (very well done by the way).
Sbrani, Please could you help me to restore as you did, my factory defaults?
Regards
Fly
Can you give more facts ? Pls look into my first thread and put down the infos. Thx
Guideline: How to downgrade to an original rom
Ok here we go this is how I solved this issue.
First you need to understand the difference between a normal SPL
and the modified SPls, which you can get here:
http://forum.xda-developers.com/showthread.php?t=296722
A standard SPL will not accept any unsigned code !
In case you bricked it already look here :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
1. you need to figure out, which radio rom matches your rom you want to flash, otherwise you end up with a bricked radio rom or even totally bricked,
if you have a standard SPL.
2.Please check it here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
for the roms
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
for the radio roms
3.Looking at my ROM, which I needed I flashed 1.10 - Olipro SPL - based on 1.04,
I flashed it by using SSPL.
4.I flashed then the needed the radio rom
which was Radio upgrade only using CustomRUU 4.3 V 1.38.30.10
5.I used then Custom RUU Updater flashing the needed rom,
but without the included radio rom.
Costum RUU Updater you can find here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU
extracting and modifying is explained here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
actually it is an how to downgrade from WM6 to WM6.
Please have a close look on how to extract the rom and how to create a
costum rom, which will fit your needs. The self made rom,
should then include the original IPL and SPL loader.
I finally used again SSPL to flash the self cooked rom.
Sorry if the guide is not very precise or not correct at all !!
Everybody is welcome to correct me and to finetune this guide.
LAST BUT NOT LEAST, please read the HERMES WIKI, it was a great help for me !!
Thank you!
You deserve a Very Very Warm thank you!
I'll try all you advised me this week-end.
Regards,
FlY
it's very good already. i think you should get it incorporated into MrVanx's guide as a downgrade for servicing section
Thanks for your guide sbrani, I have not had to downgrade yet, but it something that is in the back of my mind as I know it will be very difficult if I ever need to.
I would also second the comment that I would be very grateful to MrVanx if he wrote a general guide on how to return to factory condition , as it is much more involved than upgrading. It's one thing to flash a phone, a totally different thing to customise a ROM update in order to only flash a specified portion.
@sbrani:
What version is your radio ROM at now? 1.03.03.10 or 1.38.30.10?
I have GENE or Original DOPOD 600 with S/n starting with 7. I loaded win 6.1 prof on it but there was some problem so i stupidly tries to install HTC India Rom 6.1 on it and no its is in tri-color boot screen with following message on it:
ONBL : (BLANK)
SPL: 1.28.0000
DON'T POWER OFF!
Pls, Update new image NOW!
Re-formatting- OK!
USB
-------------------------
Is there any way out.
Please help me as this set belongs to my elder brother
hey try mobix guide for updating also not to worry as ur screen is in tri color mens u can update rom just read the post of wwefusion ....9.0 rom above this thread in that checkout commnets from zelat really useful ..
dude
u can't update with custom roms now so u have to flash original rom.
because u don't have onbl and it shows wrong spl .without onbl,spl,radio u can't flash any rom available here.
try to flash these rom
1. HTC Gene - stock - 1.17.720 - ROM
http://uploaded.to/?id=weipqd - HTC Gene - stock - 1.17.720 - ROM
2.Gene WM5 WWE ROM posted on mediafire.Link is here!!!
http://www.mediafire.com/?wbaj2ldwmxb
try first if not work try wm5 the second ,i hope it works
tell me when it done and which rom running
best of luck!!!!!
Hi there sorry for my eng. but i m new about pda s an i m using htc p3400 also known as gene.and it has original wm5 stock version and i want to upgrade to wm 6.0 or 6.1 my serial number begins with SZ7XXXXX i researched for this but i could not understand which version is possible , and how to upgrade?could u help me please?
Read the stickey
New bee in the house
I like to try out alot new techies stuff on the net to improve my phone.and so far all i ever got rite was to brick it.
Please find my info on my device.
Onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.7.0.0
serial nr: Sz730********** xt01
i have done the mmty program, but i do not get a white screen to indicate the flashing is done rite.please assist.i also formatted the device.i used gene unbricker and followed the easy to use instructions.also the spl tools.so easy to follow but still not work.
Can you please help will here to look for an answers.
Your new bee
why are you using gene unbricker i think that is for new gene... ask basha about it... im not sure.....
i got HD2 ...i tried to flash it with offical rom ...but it says invalid ID....so i tried to install HSPL... but while checking the USB connectivity it says (BAD SPL 00000)
the SPL ver is 3.03.000
tnx alot
Tray reinstall HSPL.
hspl doesnt work with spl 3.03.0000, , its a 'bad spl'.
you need to give more info, lots more,, does it currently boot? what phone is it? what region? is it rom locked? do you know your stock rom? do you HAVE your stock rom?, help us to help you.
Hi. I've read somewhere in this forum, you can remove 3.03 SPL by flashing an older stock rom ie. 1.66 Stock Rom and that'll replace the SPL and then only you can install any HSPL. I remember gotten the bad SPL message because I forgotten to remove the HSPL to install the new stock ROM. I suggest maybe you can try to install an older stock rom and try all over again because maybe something went wrong somewhere along the installation.
samsamuel said:
hspl doesnt work with spl 3.03.0000, , its a 'bad spl'.
you need to give more info, lots more,, does it currently boot? what phone is it? what region? is it rom locked? do you know your stock rom? do you HAVE your stock rom?, help us to help you.
Click to expand...
Click to collapse
my device info :
spl : 3.03.0000
radio : 2.14.50.04
rom : 3.14.404.1 (04666) NLD
& its working fine... but there is no english interface thats y i tried to install Official ENG rom... but its says INVALID ID....so i tried to re HSPL it...but it says (error 000000 BAD SPL VERSION)
yes, because hspl doesnt work with spl 3.03.0000, , , ,, extract ruu_signed.nbh from the wwe 3.14 and flash it using sspl. If that doesnt work, read the goldcard thread
i tried COLDCARD it doesnt work
it gave Error while trying to flash "00028002 not allowed" on the hd2 screen
& i tried to flash it from the pc also doesnt work
I NEED HELP PLZ .. MY HD2 WITH NL ROM & I CANT UNDERSTAND ANYTHING
how can i make sure that i did the goldcard steps right??????????
i told you already, you don't need goldcard.
you already have spl 3.03.0000 so use SSPL to flash either 3.14 wwe or artemis.
how to check goldcard - try it, if you get an error, it isn't gold.
how can i flash my hd2 with sspl???
justrelax said:
how can i flash my hd2 with sspl???
Click to expand...
Click to collapse
Take a look at this thread sir:
http://forum.xda-developers.com/showthread.php?t=606713
rom : 3.14.404.1 (04666) NLD
so i downloaded the new rom version from HTC Nederland support page & i tried to install it...but i didnt work also .
that should be the right rom to my HD2 ...right?? because its from Nederland & its already on the hd2
so i dont what's the problem
Hi,
I have a Indian HD2 and I want to try MAGLDR 1.11. But i have the official 3.14 rom with the 3.03 spl and the HTC website doesnt have any older official Roms. My S/N is not accepted in other regions ("Sorry, this software download is not suitable for your device."). My questions are:
1. Is it safe to flash the WWE 1.66.405.2 official rom using gold card method even though the website says its not suitable?
2. If not, How do I go back to older version spl so i can install HSPL?
well can help brother.. jus go to the site shipped roms.com .... goto the leo section select asia india 1.48... rom.. and flash it... then do this hardspl 2.08 and the radio thingie... i did 2.14 one and then flash magldr ...... do thank me..... and i did it ... indian hd2 works cool...
well any prob give a mssg.. happy to help indian guys.
Downloading now ..
Many thanks brother!
My pleasure buddy..and yr hardspl aur radio jarur se kar lena..
Well after a hard day struggle.. did make out a way.. and dont flash dft android go for.. mdj and ne problem cl 9549777882 my no. Love my hd2
It worked ... Thanks so much
yo... bro cheers...