Its a very nice bluetooth sterio headset / hands free.
Usual pairing, finds device - but says code is incorrect, and wont lock the device as trusted, any ideas?????
I use these with my HD no problem.
When setting up the pairing are you using four zero's "0000" as the passkey.
have done the 0000
with no luck - says wrong code...
having major probs everytime i switch the headset back on....
My BT experience is limited.
Are your S9s are paired with anything else, laptop maybe? If connected to something else when attempting to pair to your HD, maybe this would throw up that error?
I had a similar experience trying to connect to my laptop, I didn't realise they were still connected to my HD in the other room using the same headphone profile.
mmmm!....
nope, not paired anywhere else
If all else fails perhaps a factory reset?
I read this.
- Turn the Bluetooth Headset on
- Connect it to the charger
- Disconnect it after 5 seconds
- Reset is done.
Click to expand...
Click to collapse
Could be worth a try?
S9 headphone
I used my S9 with my blackstone a few times and had no problems.
You should pair the headphone first through
Settings\connections\bluetooth with headphone profile and passkey 0000
If you put in passkey just in the application (e.g. coreplayer) then the device is possibly not paired and you have to put in the passkey next time again.
The S9 can save a device list of 8 devices and connect automaticaly to on of them if it found one of them working. This worked very well at my headphone.
Best regards Wolf_munich
I have a problem with the s9 with my htc hd. I pair up the device no problem but when i play a movie or music the volume is very very low almost can't hear a thing. i use the s9 with htc cruise don't have the low volume problem. Anyone know how to fix that problem
Im using a motorola S9 with my HD in playing music and videos with no problem, works perfect.
Applepie2649 said:
...i play a movie or music the volume is very very low almost can't hear a thing...
Click to expand...
Click to collapse
Using Coreplayer? check the volume pre amp value is not set too low.
i had trouble pairing after a reflash of my titan, entered the 0000 as per this thread and im away!
cheers folks
Motorola s9 handsfree
how to open it any idea?
I have the s9 aswell and ive had no problems pairing it with my hd though one time i didnt have a problem pairing it wih my computer i tried everything on the forums about reseting it and that didnt help. What i found to work was pairing the device with another bluetooth handset (xda orbit in my case) then trying to pair it again with the computer and that worked fine.
good luck with it and if all else fails you could always phone up motorola and get a replacement if its still in the 12 months.
keep us updated
danum said:
If all else fails perhaps a factory reset?
I read this.
Could be worth a try?
Click to expand...
Click to collapse
Thank you for this, I've been trying everything to re-pair my s9 with my htc rhodium 400, passkey 0000 wasnt working, i kept getting errors, turned bt radio and device on and off and on and off and same problem, until i did the factory reset, then it took 0000 like a champ and paired up fine!
Related
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
So my Jawbone Prime was connecting fine before I updated to ICS LPQ (was on GB LA4 before) and now it doesn't even show up on the devices list even when I try to re-pair or reset the headset.
I tried 2 different sets to no avail.
Anyone know of a solution?
Connects to A2DP BT Headset (Motorola) but only allows media audio to connect. Phone audio doesnt stick.
ICS has some compatibility issues with certain bluetooth devices.
GB my phone always paired with my car stereo and streamed music without any issues.
So far every ICS release, even official, has caused my phone to reboot after streaming music over BT for 10+ minutes.
Its pretty sad they dropped the ball here. GB worked fine, and they borked it.
Well I can connect my BT keyboard fine. I just tried my Motorola BT earphones which are A2DP and it connects but won't allow phone audio to go through the BT earphones. However Media does go through. At least it detects it.
It doesn't detect it at all on the Jawbone Prime (which is not A2DP).
Update:
I managed to connect my jawbone and actually have 2 phone calls on it. After that I had the phone in my pocket and when I checked maybe 15mins later it had frozen and I had to keep power pressed to shutdown/reboot.
It kind of matches Chakker3D's pattern of working then not working. It's like there's a memory leak in the bluetooth stack? maybe I'm just spitballing here.
What I know is that in GB whenever I deactivated BT it took a good 20-25secs. In ICS it's instant to turn off or on. In GB however there was 0 issues.
I just really hope Samsung addresses it. Or if we are lucky, a dev will rework a rom so this problem is gone.
But from what I can tell, very few are having this problem.
Airbag888 said:
So my Jawbone Prime was connecting fine before I updated to ICS LPQ (was on GB LA4 before) and now it doesn't even show up on the devices list even when I try to re-pair or reset the headset.
I tried 2 different sets to no avail.
Anyone know of a solution?
Connects to A2DP BT Headset (Motorola) but only allows media audio to connect. Phone audio doesnt stick.
Click to expand...
Click to collapse
Sometimes is helps when you change kernel. Give a try
078gregory said:
Sometimes is helps when you change kernel. Give a try
Click to expand...
Click to collapse
Another update:
Without any intervention on my part other than keeping on trying it finally discovered my BT headpiece. In fact it discovered both.
Now it's still not 100% perfect because it discovers it, connects and immediately disconnects. If I press a button on the headpiece while it connects then it stays connected and it hasn't restarted/locked the phone yet. I even connected my 2nd headset (another Prime) and it worked.
Keeping fingers crossed. Now I need to see what happens when I walk out of range and back in range.
Hello everyone. I've been having bad bluetooth issues since I moved to ICS (LPQ at first). Most importantly:
random disconnects (at least once every time)
no metadata sent to the car stereo (in gb I used to see the song name etc, not on ICS)
I've read that deleting the bluetooth pairing and redoing it from scratch would fix the issues. I went ahead and deleted the pairing on both the car and phone side. I then proceeded to reconnect the two devices. I pressed "new device" on my car stereo, which placed the car's bluetooth in "available", also this popped up on screen: "You can now start the lookup of this stereo from your cell phone. The pin is: 1234". So, looking up for devices from my galaxy s2 I was able to properly find the car's stereo. Pressed on it, the pin dialog popped up, I entered 1234, but the phone goes back to the bluetooth screen, and the car says "wrong pin". Tried many times, nothing. Changed the pin on the car's side to 5678, retried, still "wrong pin"...
Anyone knows how to fix this? I'm currently on XWLP8.
Thanks,
TD
Noone has encountered a similar issue with ics?
find out the address of ur bt and use the last 4 0r 5 digits as password..
rocky23 said:
find out the address of ur bt and use the last 4 0r 5 digits as password..
Click to expand...
Click to collapse
You mean the address of my car's bluetooth or my phone's?
tylerdurden83 said:
You mean the address of my car's bluetooth or my phone's?
Click to expand...
Click to collapse
no ur phones...and yes did u try ur cars bt a reset...an one other way is try fresh pairing ,remove all pairs on phone aswell as on cars bt then try to pair...sometimes the cars bt is limited to 5 or 6 pairs....
Has anyone had any success with android auto and the V10? I have not been able to connect to my NEX4100 via android auto AND bluetooth....
I think there are general bluetooth issues. I have a 2014 Cadillac with CUE Bluetooth and the V10 connects fine but no media can play. Calls work fine. I've tried many of the tricks that helped with the LG G4 (turning media audio off in settings after connecting then turning it back on) to no avail.
Between this and the force restarts, I may return this phone and go with the Nexus 6P. Also annoyed that verizon is selling the Qi chargin back as an accessory...
I had the same issue with my 2014 Jetta and the V10, took me 30 minutes of restarting bluetooth, turning the phone off and on, turning the car off and on and finally I switched my car to FM and the bluetooth connected to also support media audio. After that it worked ok. No idea what's up with the bluetooth but for my wireless headset it paired without issue. Seems picky
Notasaurus said:
I had the same issue with my 2014 Jetta and the V10, took me 30 minutes of restarting bluetooth, turning the phone off and on, turning the car off and on and finally I switched my car to FM and the bluetooth connected to also support media audio. After that it worked ok. No idea what's up with the bluetooth but for my wireless headset it paired without issue. Seems picky
Click to expand...
Click to collapse
Same strange issues here.
Paired no problem to a 2015 Honda Accord. Unable to pair to a 2011 BMW X3 (however the HTC One M8, M9, Samsung Galaxy Avant and Light all pair no problem). And it paired no problem to a 2016 BMW X3.
And at the gym, it disconnected from the bluetooth headset while I was using it. Wouldn't reconnect until I powered the headset off and back on.
I've got the nex4100 as well and I have had no issues at all. Everything works as it should.
Sent from my LG-H901 using XDA Free mobile app
eazyg said:
I've got the nex4100 as well and I have had no issues at all. Everything works as it should.
Sent from my LG-H901 using XDA Free mobile app
Click to expand...
Click to collapse
Whoa... so do you think its a hardware issue that i should swap? Does android auto work for you as well?
zwan05 said:
Whoa... so do you think its a hardware issue that i should swap? Does android auto work for you as well?
Click to expand...
Click to collapse
I don't know. Others in the thread seem to be confirming the issue your having but I seem to be the only one with the exact same head unit. Do you have the update for the head unit? My S5 had issues before the update. Update is kind of old but it did help with my S5. And Android Auto is working fine.
Sent from my LG-H901 using XDA Free mobile app
I am up to date on the 4100. So i swapped it out today and now it works with Android Auto, however it still does not work with bluetooth which is super odd.. to my understanding when you plug the phone in to connect to AA it still transmits the audio over bluetooth. Pioneer said it could be something wrong with the media bluetooth profile or something. Anyways i guess im stuck until they fix it. Maybe when android M comes out.
I don't know about Android Auto, but I definitely think the V10 has Bluetooth issues. I traded my Galaxy S6 Edge+ in for a V10 a week ago. I notice the Bluetooth audio is consistently "skipping" on both my car's audio and my Bluetooth headphones. Both devices worked flawlessly on my S6. Sometimes my car will even completely disconnect from the phone and I have to go through a complete reset/re-add process to get it back.
Hoping a 6.0 update will come soon and fix this issue.
zwan05 said:
I am up to date on the 4100. So i swapped it out today and now it works with Android Auto, however it still does not work with bluetooth which is super odd.. to my understanding when you plug the phone in to connect to AA it still transmits the audio over bluetooth. Pioneer said it could be something wrong with the media bluetooth profile or something. Anyways i guess im stuck until they fix it. Maybe when android M comes out.
Click to expand...
Click to collapse
Just an update as I just ran new cable in the car for the new phone. Everything tested out fine for me. The car is an 02 Camaro that I don't drive often now that it's cold outside but after hearing your problems I wanted to make sure everything was working the way it's supposed to. I don't think bluetooth audio while on Android Auto worked at all but Google play works just fine. Bluetooth audio was flawless when not connected to Android Auto. Tested it on and off Wi-Fi. Good to hear your better after the swap.
Sent from my LG-H901 using XDA Free mobile app
I'm having problems connecting to my 2015 GMC Sierra (GMC Intellilink). I can connect, connect automatically, make and receive phone calls, but the bluetooth audio for music DOES NOT WORK. Most of the time, when I try to play a song via google play music or Deezer, the head unit in my truck immediately goes BLACK for about 10 seconds, I hear a whirrr of an internal fan, and it starts back up disconnected from the phone. The phone is causing the head unit to fail & restart. Sometimes it doesn't restart. It'll show the progress bar of the music, as well as on my phone. I can pause, play, next song, etc. but NO AUDIO comes out. It's just dead silent.
I'll let you guys know what my dealership says, as it's in service right now for this issue. I'm hoping there's an update for the software :/
When I bluetooth over to my $300 Sony x-7s speaker, every 10 seconds or so I get a loud static pop. Luckily I kept my note3 so I just use that until an update (hopefully) will fix the issue, so I can listen to my Howard Stern on the v10. I am surprised they didn't push an update on or near release date. Maybe they are going straight to Marshmallow.
So i have an update after having a week or so to play around with it. Although I cannot connect to my NEX 4100 via bluetooth I can use google play music via android auto. Also i cannot use spotify on AA UNLESS i hit play on google play music first then pause then try to play a song on spotify...... very strange.
I'm glad it's not just me... Same weird bluetooth issues here with my Mercedes E63 AMG and the COMMAND unit. It was working flawlessly with my last phone (Xperia Z3.) The V10 is nothing but a headache so far. The following problems are happening:
Won't connect at all, and hangs.
Connects for calls only, no media.
Connects, instantly disconnects, cycle repeats.
To fix it I either have to keep manually connecting from COMMAND, until it randomly works. Or disconnect from the phone, and reconnect again. Or turn bluetooth off and on. On the note of which, half the time I do that, it hangs. Love the phone, but I'm going to return it if this goes on.
Further note: I even took the car in to the dealer, and paid 150 bucks to get the latest firmware updates done on it. That didn't fix it either. Tried my Xperia again, still works flawlessly. Ugh.
I had an interesting issue with bluetooth.
I paired it to my 2015 Jeep Overland.
Music from SD Card played fine.
Then tried pandora. Nothing worked. Disabled bluetooth and pandora was fine. Went back to local mp3s from SD card and they would not play now.
Had to un-pair and pair it again. Then mp3s worked.
Played pandora and nothing and that broke mp3s again.
Then I tried my g4 on Sprint. Pandora worked fine.
Also tried Tune in Radio and that worked on v10 over bluetooth.
I think it is caused by Binge On from t- mobile downsampling the stream on pandora and the Uconnect radio does not like the bitrate or format.
I did read t-mobile will downsample streamed movies.
So folks with bluetooth issues, what are you testing with?
I have a less standard setup. I connect to my 2012 Cadillac system as a phone only, and I have an aptx bt dongle attached to the aux port that I'm connected to as a media device.
My phone connects to both simultaneously, and hands the phone back and forth for calls and music. It works flawlessly, and the audio quality way better than any OEM bt streaming that I've ever heard.
I have a Pioneer DEH 80PRS in my truck and it has connected and works perfect just like my G3 did. It always auto connects when entering the vehicle and hands off between streaming Tune in radio or from the SD card using the Android music player app and a phone call no problem. Hopefully the guys having problems will get a fix when the phone is given some MM goodness.
Same issues with Bluetooth and my 4100nex. Calls work, Android auto works, Bluetooth music does not. I'm in my 14 day window. This may be a deal breaker for me. Kinda regret ditching my note 4 for this.
Yall think it will get fixed with an update, or are we permanently screwed?
Sent from my VS990 using Tapatalk
I am having the same problem with my LG V10. It won't stay connected to my Lexus 2015. The only thing I found that would work is if I keep the phone unlocked.
looks to be an issue with LG
zwan05 said:
Has anyone had any success with android auto and the V10? I have not been able to connect to my NEX4100 via android auto AND bluetooth....
Click to expand...
Click to collapse
Same issue between LG V10 T-Mobile and my Bluetooth audio on my 2014 Kia Optima SX. I also have similar connectivity issues between the phone and the Microsoft Band. Similar reports on the Microsoft boards of same Bluetooth issues with the Band and V10. Sounds like a problem on the LG side to me.
I haven't used bluetooth much on this phone yet, so I don't know if this is device specific or a general problem. Anyway, my phone pairs with my car bluetooth dongle and works normally the first time, but when it's already paired it just won't connect, no matter what. It works again if I unpair it and pair it again, but that's not very convenient...
Has anyone else noticed this kind of behavior and is there a fix for it?
Try clearing the system cache and a network reset.
Well, I don't know what happened or changed but today it just worked... Weird.
Ah, turns out with this phone, I just need to wait until the dongle is properly initialized before trying to connect, otherwise it just gives up and won't even try again.
With my old Huawei, I could do it straight away and it would connect when it's done...
mcfox_1 said:
Ah, turns out with this phone, I just need to wait until the dongle is properly initialized before trying to connect, otherwise it just gives up and won't even try again.
With my old Huawei, I could do it straight away and it would connect when it's done...
Click to expand...
Click to collapse
Try in safe mode. May have a 3rd party app conflict.
Could also be a coincidence and the crappy dongle is giving up.
It's a cheap eBay bought one that renders an mp3 file on the fly so the car stereo can play it like normal flash storage. My wife's Xiaomi also had some issues connecting to it yesterday, and today as I was driving music stopped several times and the stereo said "USB format incompatible", then skipped to the next track and continued. I'm planning on installing an Aux input into the car soon so I can plug a better bluetooth receiver into that, so hopefully that'll solve the problem.