lost my data cable - Touch Cruise Accessories

Is there a way to substitute the data cable of my touch cruise, apart from buying it, cause I happened to get it lost. Tryed to use a simple firewire to usb cable to sync it with my pc, but it didn't work

try to use a simple USB to miniUSB cable. I have many of this and all works, it costs 1 euro its other.

thanx I could find an htc cable in a shop and solved the problem

Related

How do I identify correct USB cable???

as the title asks, i ahve so many USB cables lying around, and most (if not all) work with connecting device to pc for syncing and transferring data, but can any cable be used for flashing or does it have to be the one it came with? if so, how do i identify it?
any help appreciated
bumped for urgency and importance.
any cable works.. as long as it syncs it should do the job
thx for reply. as long as there is no risk with doing it thats great. i just dont want to get half way through and it fail on me or sumthing. lol
thx again
any cable will work ... but BE SURE TO USE THE SAME CABLE (ie connection)
dont change to a different cable (because that will be a different usb port)
so i should say port is important not cable... but in your case just use the one cable
and do read the pdf

Usb cable problem

I have one question, does miniusb cable will fit with this device or need special cable ?
the blueangel has a special port, there are adapters for notebook chargers, which covers a AC-supply generalisation, but there is no standard usb cable to use. i recently got a universal and i have to say i love the mini-usb port, since you can use all new htc accessories and everything you got lying around, i actually sync my device with a cable that came with a card reader, all that, unfortunately, is not possible with the ba
I realised this yesterday after 23:58 Very bad - i don't know where to find original cable or some connector pinout. Even my siemens unlocking cable don't work.
Nothing, phone will stay with german rom, wm2003. Even flashing via sd card not possible
Blue Angel usb cables can easily be found online if you look for them I purchased a couple for 10 dollars or less.
They tended to come with a USB docking station, this is what you'd use to sync it to a computer.
I am selling one, but postage could be an issue...
http://forum.xda-developers.com/showthread.php?t=497241

Sync/Charge usb cable

Friend: The standard mini usb cable (most popular) can be used in extUSB on D2 (Topaz) : Charging is OK and Sync is OK.
Note: I discover It after buy a 2nd cable
Well, I have so many 'standard' USB to mini USB cables I have never even taken the HTC item out of it's box.
However, the pin out on the mini port of the TD2 does allow for other things other than just sync and charge and then a specificaly wired cable would be required.
Common Mini usb works for other stuff too.
Where i live i have no high speed internet so i use my HTC pure as my internet source. Recently (after 3 weeks of use) my data cable began to come apart...
fearing i would have to buy something i couldnt afford and being mad that i have like 50 mini usb cords that i thought were useless, i found this thread and decided to test other features of the standard cable. So far I have found nothing that the cord cannot do.
my 2 cents.
geraldf80 said:
Where i live i have no high speed internet so i use my HTC pure as my internet source.
Click to expand...
Click to collapse
Question: are you then using the HTC as a modem? If so, have you ever tried using it as a modem via Bluetooth? I have never managed this and nobody in the General forum has any advice. I can only use it via usb.
No I havent sorry. My laptop don't have bluetooth so the option never presented itself. perhaps searching for bluetooth internet sharing or making a post would be more helpful.. sorry.
On the TD2 you first need to pair your phone to your PC with Bluetooth
And then there's a program called 'Internet Sharing' on my TD2 menu, you just need to pair your phone and change what the internet sharing is going to (BT in this case) and away you go.
I've heard some carriers disable this and make you pay a surcharge for tethering, which I've heard you can get round with a registry hack
(i can't post links but I did google Touch Diamond 2 Bluetooth Internet Sharing)
Another quick and easy way to do it wirelessly is to use a program like WalkingHotSpot, which converts your TD2 into a WiFi hotspot which is my preferred method if i had to go down this path
Good luck!
The additional contacts in the original connector are for the headphones. Not used in USB & Charging.
e.g. the original car charger comes with a default USB/minUSB cable, not th especial connector as added to the TD2.
GeScha said:
e.g. the original car charger comes with a default USB/minUSB cable, not th especial connector as added to the TD2.
Click to expand...
Click to collapse
That is true. I have been searching for a TD2 car charger with its specially profiled connector but could not find one. I am afraid that the standard mini USB connector will damaged the TD2 connector after prolonged use just like what had happened to my 838Pro. You need a little help with the wires and connector when charging or ActiveSync to get them connected.
Whoa this thread is a life saver. I'm in the middle of nowhere and lost my cable so couldn't charge my phone was looking for somewhere to order online it would have cost me at least 2 weeks.
Now i'm using my camera's standard usb cable.
Thank You.
I have all the normal!
Wow, I was kind of shocked, when I tried it - it worked!!! I have bought already 2 special htc oem cables - 1st one was already broken, and have never tried the original mini usb cable since now. It works perfectly too But I suppose if the mini usb cable is used, you have to be more careful for the connector, because there is some free space inside.
i'm using oem hp camera's cable. working fine on my diamond2
Thanks friends.

[Q]Homemade USB host cable

hey!
i got myself a used TG01 but it didnt came with a usb host cable, so i decided to use a gender changer and the data cable to connect the peripherals to my phone, but it did not work...it does not recognize anything, am i doing something wrong ? or cant it be connected with anything else then the usb host cable provided?
thanks!!
mordockcs said:
hey!
i got myself a used TG01 but it didnt came with a usb host cable, so i decided to use a gender changer and the data cable to connect the peripherals to my phone, but it did not work...it does not recognize anything, am i doing something wrong ? or cant it be connected with anything else then the usb host cable provided?
thanks!!
Click to expand...
Click to collapse
it's a generic micro USB cable, you can find it at NOkia or HTC store
thanks for the reply, i already made some research and found out that the host cable is in fact a special cable that has 2 wires grounded on the micro usb side.
i actually was able to make one, but it must have broke a soldering point and if i connect it, it drains my battery in 10 minutes...
after the failure i just brought one out of ebay.
regards!
BTW: i encountered and other problem...
i had 2 micro USB cables, and i destroyed 1 to make the host cable, they looked the same so i picked one at random, now the phone wont change with this cable with the ac adapter connected i have to connect it to the PC to that it can receive power.
I tested with an other cable and it worked...has anyone experienced this?
I made one using an old USB extension cable. It took about 10 mins. Short the green and white wires on the female side of the USB cable. Now will use any normal in-car charger.
mordockcs said:
thanks for the reply, i already made some research and found out that the host cable is in fact a special cable that has 2 wires grounded on the micro usb side.
i actually was able to make one, but it must have broke a soldering point and if i connect it, it drains my battery in 10 minutes...
after the failure i just brought one out of ebay.
regards!
BTW: i encountered and other problem...
i had 2 micro USB cables, and i destroyed 1 to make the host cable, they looked the same so i picked one at random, now the phone wont change with this cable with the ac adapter connected i have to connect it to the PC to that it can receive power.
I tested with an other cable and it worked...has anyone experienced this?
Click to expand...
Click to collapse
you have to have a short on the 2 data wires for it to charge.

[Q] USB Cable type for Sony Tablet - specific details

Hi everyone,
and thanks in advance for any help / advice that you may have for me.
I'll start off with my question, before I unload all of my information. I simply would like to know exactly what type of USB Connection the Sony Tablet has, and therefore, what specific USB Cable I need to buy in order to connect it to my PC running Vista.
I bought a Sony Tablet and have been surprised the lack of information in regards to the USB connectivity of the device. Specifically, the exact 'cable type' required to connect the device to a PC. Everywhere I have read so far, it simply says USB Micro, or USB 2.0 micro. But when I try use the micro USB cable that I currently use with my Xperia Play phone (which works fine for PC transfer with the phone) it's doesn't work at all with the Sony Tablet. It doesn't even register on the PC when I plug the cable into the tablet. Just nothing.
Since then, I have read a lot about USB, and found that there are different types, like 'Mini USB' versus 'Micro USB'. Apparently there is also Micro USB 'A' and Micro USB 'B'. And finally, apparently there is 4 pin micro usb and 5 pin micro usb type.
hope this all makes sense, many thanks guys.
Austab.
This tablet uses micro USB, I'm pretty sure the cable for your Xperia should work fine with the tablet. Perhaps you plugged it in upside down?
Thanks for the reply, I agree with your thought train. If it works with the Xperia, then surely it should work with tablet. I'll try it again after work today, and confirm. Is it actually possible to plug the cable in the wrong way around?
I'll kick myself if I did! Thanks again, cheers.
Austab.
It cannot be plugged in upside down, unless you use extreme force and break it.
***
But yeah, this cable *should work, if it works with your Xperia Play. In principle there is only one kind of micro-USB cable (well, actually it could have either regular type A *OR micro type A connector at one end, but let's keep it simple. Mini-USB is a different kind and A and B are just connector types.
See this picture with different USB connectors:
http://en.wikipedia.org/wiki/File:Types-usb_new.svg
Your cable should have a regular USB A connector (the one on the top left) at one end and micro-USB B connector at the other end (the one on the bottom right).
Yeah, it should work; I'm using the same USB cable that I use with my Xperia Arc.
For what it's worth, I've been having issues too. Mostly windows fails to find the drivers and install them. I've talked to multiple Sony reps and have tried multiple computers but haven't had any luck. Maybe it's a bad cable but I have had Windows detect the device...just unable to install the plug-n-play drivers.
Systems I've tried it on:
Custom built - Windows 7 with Service Pack 1
Dell - Windows XP Service Pack 3
Sony Vaio Laptop - Windows XP Service Pack 3
I had the same problem on both of tablet P and tablet S. I can tell you, its more about luck than the wrong cable type! At the end, it just works after retrying a few plugs and unplugs.
Hope they can get a fix for this soon.
Hey again guys, I've now tried the cable again with my Sony Tablet, and I'm definitely plugging it in correctly. There's no response whatsoever on the tablet or the PC once I've plugged the cable in.
When using the same cable on my Xperia play, the phone will instantly start charging once I plug the cable in to the PC. However, the PC doesn't actually recognize the phone as a device (i.e. it doesn't show up in windows explorer, or launch the Ericsson Phone Software, as it once did). It charges the phone, but doesn't talk to it, if that makes sense.
So it would seem that some Micro USB cables are good for charging only, but not for data transfer / PC recognition.
I'll buy a different cable tomorrow so will let you know if it works then.
Thanks again for all the replies guys I appreciate it.
cheers again,
Austab
Looks like the cable is faulty then and you have to try another one.
I bet one of data wires is broken, or a data contact inside connector is broken (worn down), because when you connect your Xperia Play it should also be recognized as a device.
Then again, maybe there is something wrong with your computer.
Can you try the same cable on another computer, and see if the device is recognized, before you buy a new cable. Or let them check the cable at the store to see if it really is faulty.
My understanding is you need an OTG USB cable, (On The Go) - this is what you need to connect USB keys and other hard-drives and so therefore I would think external PCs too.
I bought a nokia one for around 5 pounds from amazon, do a search for OTG USB cables,
thanks
Pratish
He wants to connect it to a computer, not connect external devices to it.
So he needs a regular micro-USB cable.
the cable is USB Host finde with this name
People, wtf are you talking?!
He *does not* need USB host (OTG) cable. That's for connecting USB devices, like keyboard, mouse, USB-storage etc., to your tablet.
He wants to connect his tablet to a computer. For that he needs a regular type A USB to type B micro-USB cable.
Hi,
Would seem like op had a charging cable, not data one. As stated, he need a regular data cable with appropriate connectors. OTG has nothing to do with it.
Sent from my HTC Desire using XDA App
Hi Crazzzik,
so you're saying that there are micro usb cables for charging only, and then there are micro usb cables for data + charging etc? That would explain things perfectly for me, as my cable seems to work for charging devices, but not communicating with a PC (i.e. data transfer).
I'm getting a new cable today - sorted!
Many thanks everyone for your help & advice
Austab
Yes when I got the cable for my sony tablet s, I saw several usb cables that would fit the tablet, but on the package it said specifically "for charging only, not meant for data transfer", so they do make the cabkes just for charging, as a PC tech, I was a little embarrassed that I just found this out this weekend.
Thanks
I also got a microUSB-cable adapter, it works fine with usb driver / joypad and keyboard
but not sure if it's capable for connecting with PC or even for charging
hello all,
I recently bought the usb cable for the tablet they sell at the sony store. The micro usb to female normal usb ( I think you know what im talking about). It is sony tablet specific. The micro usb end of the cable is square instead of tappered at one side. it worked fantastic for plugging in and usb deviced to the tablet, but when I tried to plug it into my galaxy s, it wouldn't fit. just thought those thinking of buying one would appreciate the heads up so its not a shock if they try to use it on any other devices. Im sure you can find that same cable at any well stocked computer shop.
i borrowed a htc wildfire s cable, this works and installs drivers.

Categories

Resources