Hello guys. Has someone tried Nokia LD-3W bluetooth gps receiver? If sow how did you set it up to work with the charmer?
Used it with Palm TX only
There is no setup required on Nokia LD-3W, just make sure your phone's bluetooth has added the LD-3W as a device (paired it). Turn on both your phone BT & LD-3W, before you start your TT or Garmin software. It should work right away, HTHs...
Related
Hi guys,
I've been using the 1.72 ROM for a couple of weeks now and I must say it is the most stable ROM since I've my MDA II. The radio on/off works like a charm and so does the bluetooth. But.....
I use TomTom Navigator 3 with an Emtac bluetooth GPS. It works fine with this ROM but I can't use TomTom anymore without the Emtac bluetooth GPS. What I mean is: Before this ROM I would sometimes open up TomTom to look something up on the map. This would be with bluetooth turned off and my GPS would be somewere else. Now with this 1.72 ROM and the Bluetooth Tools in it, I can't do this anymore. My MDA II will slow down in opening TomTom and will then freeze. It needs a soft reset to get out of this stage. This is very repeatable. I think it has to do with the bluetooth tools in the ROM.
So my questions are:
1. Does any of you guys have the same problem with a bluetooth GPS?
2. Can I do a hard reset and not let this bluetooth tools be installed and still get my bluetooth GPS working?
I hope any of you knows the answer to this (minor) problem.
Thanks!
Wouter
are you using the latest version of the tomtom gps driver, I had this problem on my old IPAQ 3970. but everything works fine on my XDA with 1.72 and bluetooth tools
I use the very, very latest GPS driver. So you can't reproduce that problem with a bluetooth gps mouse?
Wouter
I have a GlobalSat GPS mouse and it works fine.
Jon
I also have the latest GPS driver with the TomTom Wireless (Bluetooth) GPS mouse and works without any problem
Hi Xzanix,
Just to be sure if I just have bad luck. You can open the map in TomTom and look something up without the bluetooth GPS turned on? (I just want to be sure....)
Thanks,
Wouter
:lol: :lol: :lol:
Hi guys,
This thread can be closed. I solved the problem!
I tell you what I did. I had in the GPS settings choosen for COM5 because I had that one activated in the Bluetooth Tools. This was how TT did work but didn't work with no GPS turned on.
Now I turned Bluetooth Tools off and choose for Bluetooth GPS in the GPS settings. Now it works how it is supposed and I can still look something up on the map without my bluetooth GPS turned on.
I'm so happy! :lol:
Wouter
Cool 8) Was just compiling a reply Nice to read you've solved your issue
Well, thanks for your effort!
:lol:
Wouter
The Orange SPV M1000, same as a XDAii, does not allow 2 headset profile bluetooth devices to be connected
The phone works fine with my Motorla 810 bluetooth headset.
It will also work fine with the Parrot 3300 to take and make calls, run TomTom3 sat nav and Livewire Speedcare.
The problem is the software on Orange will not allow 2 devices to be paired and stored on the phone which have bluetooth headset profile recognised. When the second device is paired it stops recognisning the headset capabilities of the first device.
Orange do not have a care kit profile for the phone.
This brings significant problems in moving from car to foot as one has to repair the alternative device. All settings and voice commands are then lost for the previous device.
Can anyone direct me to somewhere I can have the O2 software installed or an alternative solution for allowing 2 Bluetooth headset profile devices being paired at one time. Only one device will be connected at a time.
Hello all,
I was just curious. Im considering purchasing an external bluetooth GPS receiver and running TomTom on my device when im driving.
I also currently use a bluetooth handsfree device.
Am i able to use both bluetooth devices?
I have no problems connection a bluetooth GPS (Holux 236) and a handsfree device (Nokia HS12W) together (and using them at the same time).
HTC branded TYTN.
Only downside might be in the way the applications address the display. Nokia Smart2Go doesn't seem to like the phone application interrupting it... (it works, but phone application doesn't show)
Jörg
V J said:
I have no problems connection a bluetooth GPS (Holux 236) and a handsfree device (Nokia HS12W) together (and using them at the same time).
HTC branded TYTN.
Only downside might be in the way the applications address the display. Nokia Smart2Go doesn't seem to like the phone application interrupting it... (it works, but phone application doesn't show)
Jörg
Click to expand...
Click to collapse
TomTom works fine with the phone.
Hi all!
I want to use a bluetooth gps with my hero. i can pair the hero with the bluetooth gps, but i can't connect with it.
I know that there is a gps in the hero, but i want to use this app:
http://trackmaster.trackaroo.com/welcome
Which is far more accurate with an external unit on a track. Moreover, my car as a athermical windshield, and i would like to put the bluetooth unit in the back of the car to avoid signal cut.
The app use this add on to exploit external gps unit: bluetooth gps service: but in the description of the app we can read: htc hero not support bluetooth gps.
In my search on google, i could read that htc devices doesnt support SPP profile.
Any chance to find something to make it work??
Ps: i found the app "Bluetooth gps" which work like a charm with my external gps, so it can work, but how?
Hello, I've bought an NL-324BTR bluetooth TMC riceiver wich "works" on COM2 when I pair it with bluetooth. The problem is that everytime I start bluetooth on my device (I use phone weaver to autostart bluetooth connection in my car) the port COM2 doesn't reconnetc automatically and I have to go to the bluetooth settings and reconnect it manually. This is a very very bad issue for me (as you can imagine I can't drive and reconnect devices in the same time ). Is there an app, a script or something like that wich allows me to reconnect the COM automatically?
Uh, I was forgetting, in my car I've installed a parrot bluetooth hands free car kit wich works perfectly and automatically reconnect each time. I've also tried to use the COM with or without the parrot connection established but nothing has changed, no way to reconnect it automatically.
Any suggestion?
Thanks and regards
Andrea