[CAB] Touch Pro Keyboard in Fuze ROM, and vice-versa - Touch Pro, Fuze ROM Development

I've made 2 CABs for an easy switch between keyboard layouts.
This might be helpful to you if:
You have a Touch Pro device (The device on the left side of the picture), you've flashed to a Fuze ROM and now the keyboard does not function properly - download and install Shlomki TouchPro Keyboard in Fuze ROM.cab
You have a Fuze device (The device on the right side of the picture), you've flashed to a Touch Pro ROM and now the keyboard does not function properly - download and install Shlomki Fuze Keyboard in TouchPro ROM.cab
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​ Touch Pro on the left, Fuze on the right.
(thanks JZ SmartMort for the ref for the pic)
​ Notes:
-SOFT RESET YOUR DEVICE WHEN DONE TO FINISH THE INSTALLATION!
-Not anything revolutionary, it just an easy and comfortable way to change the registry key HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD\CWSLayout to the right value, that's all (0 for Touch Pro, 1 for Fuze).
-These CABs are uninstallable (use Settings -> System -> Remove Programs)
-I recommend including it on your UC setup, this way you don't have to worry about installing it every time you flash to a ROM that's not made for your keyboard layout
-Install on your own responsibility
Mirror:
http://www.fileflyer.com/view/7mwM0Bh

Good job slomki
I think Ive seen that cab somewhere before. Thanks for the preview in my thread
Keep it up.

Not to burst your bubble :| But there was already a cab for Touch Pro to Fuze. So I congratulate you for making one for fuze to touch pro lol

aruppenthal said:
Good job slomki
I think Ive seen that cab somewhere before. Thanks for the preview in my thread
Keep it up.
Click to expand...
Click to collapse
heh thanks. your awesome rom is what made me make it in the first place, just thought i'd share
and then someone asked me for the opposite, so i just made another one and started a thread for it.
Kraize said:
Not to burst your bubble :| But there was already a cab for Touch Pro to Fuze. So I congratulate you for making one for fuze to touch pro lol
Click to expand...
Click to collapse
eh, as i said, it's just because i saw people were interested in it.
it's just a simple reg change anyway.
oh well, at least now it's posted and tagged properly. =P

Hacking keyboard values...
So you're changing where the device looks for keyboard map is that correct?
What about changing the actual map it's self? Is there a way to change specific values of each of the keys? The Fuze map for instance doesn't have a control key, and it would be great if you could change one of the other keys, say the right shift key, to act as a control key. Far easier for keyboard short cuts, (ctrl + c & v )
Is there a way to accomplish this by changing a registry value else where? Or change a file map someplace that maps each specific key?
Thanks!

PlazmaFox said:
So you're changing where the device looks for keyboard map is that correct?
What about changing the actual map it's self? Is there a way to change specific values of each of the keys? The Fuze map for instance doesn't have a control key, and it would be great if you could change one of the other keys, say the right shift key, to act as a control key. Far easier for keyboard short cuts, (ctrl + c & v )
Is there a way to accomplish this by changing a registry value else where? Or change a file map someplace that maps each specific key?
Thanks!
Click to expand...
Click to collapse
that's not a reg change, you'll need an app that'll do it for you.
google it up, there are plenty.
try AE Button Plus, i've used it in my HTC Universal days...

Cool, the cab didn't work, but the reg fix did the job. Quick and effective. Thanks.

TP to Fuze keyboard worked great on the PROven rom. I was using the regedit before hand, but this is definitely an easier way to go about it.
Thanks a bunch!

atomixpaintball said:
TP to Fuze keyboard worked great on the PROven rom. I was using the regedit before hand, but this is definitely an easier way to go about it.
Thanks a bunch!
Click to expand...
Click to collapse
thats weird, did you softreset after installing?

I cant install this keyboard in my fuze
Who i can install????
Thanks

matiastouch said:
I cant install this keyboard in my fuze
Who i can install????
Thanks
Click to expand...
Click to collapse
does your fuze has touch pro ROM ?

X05HT
I have an HTC FUZE with the Japanese Softbank ROM on it.
i tried installing the cab, but it doesnt work.
what exactly does this cab do?

kageboushi_000 said:
I have an HTC FUZE with the Japanese Softbank ROM on it.
i tried installing the cab, but it doesnt work.
what exactly does this cab do?
Click to expand...
Click to collapse
read the first post again, and thoroughly - it's really plain english.
the notes say EXACTLY what this cab does.

Thanks! worked great for me. Will keep using it until I figure out how to set these things in my xml file.

kageboushi_000 said:
I have an HTC FUZE with the Japanese Softbank ROM on it.
i tried installing the cab, but it doesnt work.
what exactly does this cab do?
Click to expand...
Click to collapse
Touch Pro and Fuze have different keyboard layouts. The two CABs allow you to switch between the layouts.
Here is the source of the info: http://www.crunchgear.com/2008/11/12/review-htc-touch-pro-sprint-and-htc-fuze-att/
Screenshot of two keyboards attached. On the left side is Touch Pro, on the right is the AT&T Fuze. Numbers on the top row of Touch Pro is the big difference. It might be useful to have this reference on the first post.

JZ SmartMort said:
Touch Pro and Fuze have different keyboard layouts. The two CABs allow you to switch between the layouts.
Here is the source of the info: http://www.crunchgear.com/2008/11/12/review-htc-touch-pro-sprint-and-htc-fuze-att/
Screenshot of two keyboards attached. On the left side is Touch Pro, on the right is the AT&T Fuze. Numbers on the top row of Touch Pro is the big difference. It might be useful to have this reference on the first post.
Click to expand...
Click to collapse
thanks, i updated the first post.

Nice work, thx

Noob Needing Help with Keyboard
I have an ATT Fuze that I just updated with [ROMeOS²][ENG][15FEB|READY] v1.81.1 FINAL (20764). My keyboard layout is now messed up and I found this thread without problems. However I cannot figure out how to install the two files contained in the download. I also tried to edit the registry but I do not have a CWSLay option to change. I had absolutely no problems flashing the HardSPL or the ROMeOS rom but this has me stumpped. I have literally spent hours trying to figure this out yesterday and today. I come with hat in hand, shamefully asking for help.
thanks

@[email protected]:
Haven't tried them yet but if they are like other CAB files, you should be able to copy the appropriate CAB to your device Storage or Storage Card. Once copied, you should be able to use File Explorer on your device to click (double-click) the CAB file ... which should trigger the install.
If the install doesn't trigger, it could indicate that your device is preventing unsigned CAB files from being installed.
HTH,

Thanks hilaireg,
I had tried that at the very first and when I double click on the _setup.xml file it goes straight into a text editor. It doesn't even try to install. I also downloaded a program CabviaActive Sync but that didn't work either. When I click on the file FUZEKE~1.00 it says it can't be opened because it is not associated with a program. Believe it or not I have installed other programs and things on my phone in the last 3 weeks or so that I have had the phone but as I said, I'm stumpped.

Related

[APP][VGA]HTC Menu Enhancement(FROM ALL NEW DEVICES)[UPDATED!!][9/4/09][ONLINE]

I made these cabs from the latest HTC devices:
HTC Rhodium
HTC Topaz
HTC Tachi
HTC Leo
RELEASE NOTES:
These will only work with Windows Mobile builds 21000+
If you DO NOT have a 21000+ build on your device, you can use francarl's Menu Enhancement Loader V1.1. I have personally tested this on my Fuze running the stock ROM and it works PERFECTLY!! Kudos to francarl!
These may or may not work on WM6.5. I don't use WM6.5 so I can't test them on it.
THESE CABS HAVE BEEN MODIFIED TO WORK ONLY ON VGA! THEY WILL WORK ON WVGA BUT WILL BE VERY SMALL!!
IF YOU WANT TO DISCUSS QVGA, PLEASE POST IN THIS THREAD HERE.
​
Installation instructions:
Uninstall any version of the HTC Menu Enhancement you may have previously installed.
Soft-reset.
Install cab.
Soft-reset.
Enjoy!!
You can find the downloads in post 2 of this thread. Screenshots are in post 3.
Descriptions and Download Links
Tachi Menu Ehancement:
This came from a WM6.5 Tachi OEM. This has been tested on builds up to 21051 and works great. I personally am using 21051 and will confirm that it works perfectly. This has not been tested on WM6.5 so please report your results!!
Topaz Menu Enhancement:
This came from a shipped official Topaz ROM. I have tested it on my ROM(21051) and it works fine. Not tested on WM6.5.
Rhodium Menu Ehancement T-Mobile:
This came from the T-Mobile Rhodium 21051 ROM. I have also tested this on my ROM and it does work. Not tested on WM6.5. This menu Enhancement has a blue highlight instead of green.
Rhodium Menu Enhancement:
This is the original cab I posted back when I first started the thread. It is from the European HTC Rhodium 3G ROM. Since I originally posted it I made a small improvement to landscape menu width. This has been tested to work by many but I will tell you right now, IT DOES NOT work with my 21051 ROM. The only way I was able to get this to work was to replace the GWES.exe from the 21018 build before building the ROM.
Rhodium 6.5 Menu Enhancement:
This is from a leaked WM6.5 Rhodium 6.5 ROM. This will work on both WM6.1 and WM6.5 but you will not be able to scroll in WM6.1. WM6.5 users please report your results.
Leo 6.5 Menu Enhancement:
This is from the new and un-released HTC Leo. It is made for WM6.5 but as you can see in the screenshots below, I have it installed on a WM6.1 ROM to test and scrolling doesn't work if you install this cab on WM6.1. It has been modified for VGA from WVGA. Please test and report your results.
Leo 6.1 Menu Enhancement:
This is the same cab as the 6.5 version above but I've modified it to allow scrolling with WM6.1. DO NOT USE THIS VERSION WITH 6.5!!! This is also modified
Rhodium 6.1 Menu Enhancement - Sprint:
This is a cab put together by smotrs. It's actually a modified version of my original Rhodium Menu Enhancement cab including a custom Sprint PCS Skin he threw together. He already uploaded it so I'm not going to post it here but you can find it in Post 404 and a screenshot of his skin in Post 405. Thanks smotrs for your skin!!
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The ^^above^^ screenshots are the same for Tachi, Topaz, and Rhodium WM6.5 Menu Enhancements. Even though they are different devices, they look the same when installed to the device.
The ^^above^^ screenshots are from the HTC Rhodium Menu Enhancement(WM6.1). See release notes in post 2 about this version.
The ^^above^^ screenshots are of the HTC Leo WM6.5 Menu Enhancement. I know, I know... The screenshots are on a WM6.1 ROM but scrolling does NOT work. Read release notes in post 2.
why not just use francarl's fingermenu?
it looks exactly the same and works great
htctoucher said:
why not just use francarl's fingermenu?
it looks exactly the same and works great
Click to expand...
Click to collapse
Yes it looks similar but isn't nearly as fast or fluid. When I tried it about a month ago on my Touch Pro it was disgustingly lethargic... It's also not created by HTC and so yes I could use fingermenu but at the same time I would much rather have this menu extension instead and it's worth the effort.
In which resolution are you trying? QVGA, WVGA, VGA?
I have only fast looked in your cab, in your screen appear 6 items but in the cab it says that it has to show 8 in portratimode
Also have you played whith the position of the NavilIcon/NaviHW (modifying the registry)?
mac_es said:
In which resolution are you trying? QVGA, WVGA, VGA?
I have only fast looked in your cab, in your screen appear 6 items but in the cab it says that it has to show 8 in portratimode
Also have you played whith the position of the NavilIcon/NaviHW (modifying the registry)?
Click to expand...
Click to collapse
I have a VGA device(Touch Pro) and it's set to show 8 items but for whatever reason it only displays those 6 items unless you scroll manually. I tried reverting the reg to only 6 items but it still has the same effect for me.
dharvey4651 said:
Yes it looks similar but isn't nearly as fast or fluid. When I tried it about a month ago on my Touch Pro it was disgustingly lethargic... It's also not created by HTC and so yes I could use fingermenu but at the same time I would much rather have this menu extension instead and it's worth the effort.
Click to expand...
Click to collapse
yeah that makes sense, having an officially made app is usually better (HTC is amazing so i get where you are coming from)
i do like that oyu can scroll with your finger thru fingermenu, and disable the arrows.. is that possible with this? (not disabling arrows, the scrolling through with fingerstroke?)
mac_es said:
In which resolution are you trying? QVGA, WVGA, VGA?
I have only fast looked in your cab, in your screen appear 6 items but in the cab it says that it has to show 8 in portratimode
Also have you played whith the position of the NavilIcon/NaviHW (modifying the registry)?
Click to expand...
Click to collapse
Those values I haven't played with. I'm afraid that if I change them the extension may become un-usable.
I think the problem is that you have taken this from a WVGA, and it thinks that the arrow is not int he place you view. You will need to modify the coordinates to say where is the arrow.
Basically you will need to modify the 'y' to adjust your screen height
YES!
It Works Great in BalckStone
the arrow is working
It would be great if someone could port this to VGA an QVGA...
I will try it when I have spare time, but basically to por it (maybe someone is capable of trying it):
VGA:
1) Change the xxxxHW items in the registry to reduce the 'y' length of the screen
QVGA:
1) Change the bmps to reduce it is width/height
2) Modify the xxxHW items in the registry to reduce the 'x' and the 'y' of the screen
3) Adapt the xxxIcon and xxxTile to the new coordinates of the bmps
very interesting cab this one.
CUIHandler.dll (which is in this cab) exports a single function, CustomTrackPopupMenu. This function probably replaces standard TrackPopupMenu API.
I've done the same thing in my FingerMenu app. My app inject a dll in gwes.exe process than replaces in ce kernel the address of original TrackPopupMenu with the new one.
The interesting thing is that in hts menus replacing with custom procedure is done (I think) by specifying a simple registry key that is:
HKLM\System\GWE\Menu
CUIHandler=00000001
perhaps only newest builds of windows mobile have this feature.
Seeing as it works on the BlackStone but not the X1, and that it looks like it is only activated by a simple registry setting, would something as simple as replacing the gwes.exe with the one from a build > 21000 allow this htc menu to work?
aussiebum said:
Seeing as it works on the BlackStone but not the X1, and that it looks like it is only activated by a simple registry setting, would something as simple as replacing the gwes.exe with the one from a build > 21000 allow this htc menu to work?
Click to expand...
Click to collapse
gwes.exe is a kernel process that manage all graphics apis. I really don't think that a simple replace can works.Try instead to build a ROM with version >21000.
But X1 is WQVGA (or not?) so I think it will not work correctly.
Another .dll file is required
HTCScroll.dll:
wow this looks so much like francarl's FingerMenu it's unreal a clone
I take it this will only work on HTC phones?
I'm looking for such a program for my iPAQ 910c, but at the moment FingerMenu doesn't seem to work (possibly due to the landscape display).
Well I somewhat got it to work ion my QVGA Device. I rezized the 2 graphic files to 240 x 109. I also changed the following 2 Registry Entries, \HKLM\Software\HTC\HTCMenus\ItemHW to 220,36,240,36 and \HKLM\Software\HTC\HTCMenus\NaviHW to 220,23,240,23 and reset and it seems to function well, but the graphic is messed up. It scrolls well and the arrows work. The Text Color is good, it is just the background part of the graphic is like a color pixel mess.
Still working on these 2 entries xxxIcon and xxxTile to the new coordinates of the bmps to try and fix as suggested previously.
Will update soon, hopefully
btxakita said:
Another .dll file is required
HTCScroll.dll:
Click to expand...
Click to collapse
I added the dll and registry to the cab file. I'm testing right now. Will report back. If it works I will repost the updated cab.
EDIT:: It works. Updating first post right now.

[MOD] Add 3G Switch to Comm Manager - 3G Toggle - (Black & White Available)

I scoured the web for a decent looking 3G icon in CommManager and they were not pleasing to the eye. I am NOT an artist, in fact I suck at it but mine still look better than the alternatives and I provide the black and white CAB of the images to match most themes.
Here is my 3G icon CAB for Comm Manager based on this post: http://www.fuzemobility.com/how-to-disable-3g/
Why do you need this? Because turning off 3G makes my Touch Pro (AT&T Fuze) battery last longer, about 2-3 days instead of having to charge daily. Low 3G reception areas cause the phone to keep looking hard for that 3G signal. EDGE network is a trade-off, my other software has support have plenty of web browsers that are optimized for low-speed, so I only turn on 3G when I truly need some internet speed.
Only for GSM phones
Does not work on Touch Pro 2 or Diamond 2. My guess is it will no longer work for newer devices as HTC has disabled this hidden feature in Comm Manager. Use my app, JZ SmartMort which has a macro/script to turn 3G on and off. It's the only thing I can offer for newer devices.
It will replace whatever button is in the 5th position (look at the screenshots below), usually "Microsoft Direct Push" is in that position.
To restore Microsoft Direct Push back to position #5 in CommManager, you can do either of the following.
Uninstall my CAB and it will reverse the single registry change.
Using the Advanced Config Tool (Right-Menu -> More Settings -> Comm Manager) the order of the buttons can easily be changed.
Modify the registry for that 5th button HKLM\Software\HTC\CommManager\5\(Default) change "3G" string that my CAB put there to "AUTD", which basically means MS Direct Push.
The most important thing that the CAB provides is the four images that will end up in \Windows folder. After the CAB is installed, you have to kill CommManager.exe if it's running or take a reboot before seeing the new button/image.
This will work on VGA, QVGA and other devices running the "Diamond" or "Opal" version of CommManager (verify with screenshots below) and it should work on all ported versions of CommManager as well.
Tested on:
HTC Raphael / Touch Pro / Fuze
HTC Tytn II / Kaiser / Tilt --- (needs HTC CommManager like shown below not the original blue Microsoft one)
Enjoy!
JZ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I ripped this white 3G button with a circle around it from Da_G's WM 6.5 Kitchen.
Above you see how it looks and from the attachments this is CAB that you would want.​
please help me, Icons on Comm manager!!
thank!
anhphe076 said:
please help me, Icons on Comm manager!!
thank!
Click to expand...
Click to collapse
Did you install one of my CABs? If so then why is 3G button not in the 5th position? I also noticed that your signature says that you a Kaiser / Tilt, which is a QVGA device. I just tested my 3G CABs on a QVGA device and they work just as good as on VGA devices, so this can't be caused because you installed my CABs.
Re-install your Comm Manager from links below, obviously stick to QVGA.
Full QVGA version of CommManager:
http://forum.xda-developers.com/showthread.php?t=394201
http://forum.xda-developers.com/showthread.php?t=376051
http://forum.xda-developers.com/showpost.php?p=2115587&postcount=42
http://forum.xda-developers.com/showthread.php?t=430468
Full VGA version of CommManager:
http://forum.xda-developers.com/showthread.php?t=465531
http://forum.xda-developers.com/showthread.php?t=502416
Lastly, please don't use this thread for general questions unless you installed my CAB's and it's causing problems. There are plenty of Question & Answer threads/sections on this forum to post your questions and this answer was easy to find with the following google search terms "comm manager qvga xda" and "comm manager qvga xda diamond"...
Thanks!
JZ
Thank JZ SmartMort very much!
On my device (italian rom) the buttun don't work, don't do nathing
domenic79 said:
On my device (italian rom) the buttun don't work, don't do nathing
Click to expand...
Click to collapse
Feel free to post a screenshot of your Comm Manager...
JZ SmartMort said:
Feel free to post a screenshot of your Comm Manager...
Click to expand...
Click to collapse
The skin are ok when i install, the problem are when i pusch for able or disable 3g it don't do nathing, and still on disable also a button don't move for able it
tnx a lot works perfect on tytn2 with wm6.1 and opal comm manager. was looking exactly for this for sooo long time.
tnx a lot
domenic79 said:
The skin are ok when i install, the problem are when i pusch for able or disable 3g it don't do nathing, and still on disable also a button don't move for able it
Click to expand...
Click to collapse
What device do you have? I hope it's 3G capable because that's the only time you'll ever need the 3G button...
JZ SmartMort said:
What device do you have? I hope it's 3G capable because that's the only time you'll ever need the 3G button...
Click to expand...
Click to collapse
Sorry I have a HTC HD Whit LP EVO II Rom (ITA)
domenic79 said:
Sorry I have a HTC HD Whit LP EVO II Rom (ITA)
Click to expand...
Click to collapse
An HTC HD device certainly 3G capable... you have the screenshot? Use MyMobile if you don't know how to easily take a screenshot, I love that program. http://www.mymobiler.com/
Installed, tested, and working beautifully on my HTC TyTn 2. I am running Anryl 6.5 RC1. NO troubles at all. Thanks for the GREAT app!
Doesn't seem to make difference on mine as well. I am using Touch HD with Dutty's XT v3
ionrage said:
Doesn't seem to make difference on mine as well. I am using Touch HD with Dutty's XT v3
Click to expand...
Click to collapse
Interesting, I don't have Touch HD so I can't say for sure but some procedures below should hopefully answer this popular topic of HD.
Have you tried going into Advanced Config Tool and following the instructions from the first post to change CommManager button order around?
I'm pretty sure that I've seen Touch HD with the same CommManager as Diamond/Fuze uses so it seems as if it should work.
Post screenshots if possible... of CommManager and Advanced Config settings. I want to see if the button present or grayed out, etc... It's hard to assess anything w/o this sort of info.
Looks like a neat piece of software!
Two questions:
1) Will it restore the default comm manager when uninstalled?
2) Is there a way for localisation (ie show some other text than English)?
Ta,
N.
Nightcookie said:
Looks like a neat piece of software!
Two questions:
1) Will it restore the default comm manager when uninstalled?
2) Is there a way for localisation (ie show some other text than English)?
Ta,
N.
Click to expand...
Click to collapse
Great question!
No, it will not return button #5 back to "Microsoft Direct Push"... You would need to use Advanced Config to change the order back... I guess I could create a CAB to restore back but Advanced Config is a popular utility, I would expect most users here to have that handy.
An uninstall will probably delete the image files from \Windows and leave the user with a blank button.
EDIT: look at the first post for a restore CAB which you should run after uninstalling.
JZ SmartMort said:
Great question!
No, it will not return button #5 back to "Microsoft Direct Push"... You would need to use Advanced Config to change the order back... I guess I could create a CAB to restore back but Advanced Config is a popular utility, I would expect most users here to have that handy.
An uninstall will probably delete the image files from \Windows and leave the user with a blank button.
EDIT: look at the first post for a restore CAB which you should run after uninstalling.
Click to expand...
Click to collapse
I tested further and found out that my CAB will put the registry setting back to MS Direct Push when my CAB is uninstalled. This is the registry value: HKLM\Software\HTC\CommManager\5\(Default) = "AUTD"
Again, the answer is YES my CAB will put reverse the single registry change that it makes, I forgot about that general feature of CAB files.
I'm pulling the useless "restore" CAB from the first post.
Good mod but on my Htc Diamond doesn't work. If I put 3g icon to off in Settings i see GSM, but if I put it to ON i see on settings 'Auto' and not WCDMA (3G) so the diamond connect however to Edge (GSM).
Thanks
leen15 said:
Good mod but on my Htc Diamond doesn't work. If I put 3g icon to off in Settings i see GSM, but if I put it to ON i see on settings 'Auto' and not WCDMA (3G) so the diamond connect however to Edge (GSM).
Thanks
Click to expand...
Click to collapse
Is your Diamond CDMA or GSM?
Keep in mind this is not a hack, this is default functionality for that Comm Manager. My CAB simply changes one of the buttons to a predefined string in the registry, not something that I came up with. The only thing that I provide is the images... take a look at this website and you will see that this is a known mod for these devices but only GSM not CDMA versions of the devices. I will change the first post to reflect that.
Take a look at this thread, this mod has been out for a while:
http://www.fuzemobility.com/how-to-disable-3g/
When you use this mod w/o my CAB, the button will still work but will have an empty image which I certainly did not like, hence my effort.
JZ SmartMort said:
Is your Diamond CDMA or GSM?
Keep in mind this is not a hack, this is default functionality for that Comm Manager. My CAB simply changes one of the buttons to a predefined string in the registry, not something that I came up with. The only thing that I provide is the images... take a look at this website and you will see that this is a known mod for these devices but only GSM not CDMA versions of the devices. I will change the first post to reflect that.
Take a look at this thread, this mod has been out for a while:
http://www.fuzemobility.com/how-to-disable-3g/
When you use this mod w/o my CAB, the button will still work but will have an empty image which I certainly did not like, hence my effort.
Click to expand...
Click to collapse
My diamond is GSM version (With Sim) but UMTS, HDSPA and 3G Enable only with WCDMA Option..

[APP] Slide2Shutdown v1.1 [31/08/2009] (Now supports all resolutions!)

Along similar lines to S2U2, I've decided to make Slide2Shutdown! There's nothing special to configure, just install it and go. All resolutions should work fine (make sure you download QVGA for QVGA or WQVGA devices), but I only have the ability to test it on a VGA device so I can't guarantee how well it works in other resolutions. It also supports both portrait and landscape seamlessly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are four CABs available to install. They require version 3.5 of the .NET Compact Framework, the program won't run without it.
Slide2ShutdownSetup_v1.1.CAB just installs the application without mapping it to the power key. QVGA/WQVGA version.
Slide2ShutdownPowerKeySetup_v1.1.CAB installs the application, and maps it to the power key so that it will automatically launch when you hold down the power key. QVGA/WQVGA version.
There's no elaborate skinning method built-in, but the graphics are all stored in the \gfx\ folder and you can change them at will. Just replace the BMP files with your own files of the same dimensions.
Multiple language support is now available. You will find the available languages in the \lang\ folder. To enable your chosen language, open the txt file and change the first line to say "1" instead of "0".
Languages available:
Chinese (thanks winderp!)
Czech (thanks RDT!)
Danish (thanks TorbenKB!)
French
German (thanks basthet!)
Greek (thanks dancer_69!)
Italian (thanks fuorionda!)
Polish (thanks CZiPEN!)
Russian (thanks Alexx~!)
Spanish (thanks PabloMDiez!)
It should be pretty straightforward to create your own languages. Create a file called "lang.yourlanguage.txt". Make the first line 0. The second, third and fourth lines should be "slide to shutdown", "restart" and "sleep" respectively, and the last line should be the text for the cancel button. Please post your language file if you translate it, and I'll add it to the next version!
Changelog:
v1.1, 31/08/2009:
FIXED: HTC devices should shutdown properly now. HUGE thank you to DaveShaw for helping me with this. I don't think Omnia devices will though. Please send me a PM if you know how to rectify this.
ADDED: Support for multiple languages. French and German (thanks basthet!) included. See above for information on enabling this.
v1.0, 30/08/2009:
Initial release
BUG: Shutdown slider doesn't currently work well on many HTC phones (it only suspends), I'm looking into a fix.
Thanks for your great work!
I will report it, if it has bug.
Great idea
Great. Thanks a lot
QVGA/WQVGA would be nice.
I'd like to have this mapped to my power key on my Omnia...
cheers.
Cythrelo said:
Along similar lines to S2U2, I've decided to make Slide2Shutdown! There's nothing special to configure, just install it and go. At the moment, it's VGA-only but if there's enough demand, I'll make a QVGA version as well! I haven't tested it in WVGA, but I don't see why it wouldn't work just fine. It also supports both portrait and landscape seamlessly.
There are two CABs available to install. They require version 3.5 of the .NET Compact Framework, the program won't run without it.
Slide2ShutdownSetup.CAB just installs the application without mapping it to the power key.
Slide2ShutdownPowerKeySetup.CAB installs the application, and maps it to the power key so that it will automatically launch when you hold down the power key.
There's no elaborate skinning method built-in, but if the graphics are all stored in the \gfx\ folder and you can change them at will. Just replace the BMP files with your own files of the same dimensions.
Changelog v1.0, 30/08/2009:
Initial release
BUG: Shutdown slider doesn't currently work well on many HTC phones (it only suspends), I'm looking into a fix.
Click to expand...
Click to collapse
Very, very cool.
Thanks,
dwizzy130
WQVGA would be awesome.
Nice Idea.
Wating for QVGA.
Suggestion:
1.At top:Center text:"Slide2Shut".
2.Move the three slide to centre.
3.Add some background.
4.Full Screen.
Very useful application!
It works well in Touch HD, except the bug you already mentioned.
I would like to ask you to add 'slide to screen off'.
Thank you!
Good news! It turns out that it was easier to add QVGA and WQVGA support than I thought it would be. I just added QVGA cabs to the first post, let me know if you have any problems since I can only test on emulators and not real devices.
Very nice! I'm especially fond of the dimmed background.
Cythrelo said:
Good news! It turns out that it was easier to add QVGA and WQVGA support than I thought it would be. I just added QVGA cabs to the first post, let me know if you have any problems since I can only test on emulators and not real devices.
Click to expand...
Click to collapse
Working great on my Omnia which is WQVGA. Thanks for the quick conversion.
Is slide to off supposed to turn the device off completely? If yes then that is not working for me either but it suspends and resets.
Glad to hear it's working well for you!
Yep, it's supposed to turn off entirely. Unfortunately, HTC devices seem to have their own method of shutting down, and the method I tried to use didn't work. I haven't been able to find any information on how to do a proper shutdown for HTC devices, but I've been looking and asking around and I'll implement a bugfix as soon as I figure it out.
Cythrelo said:
Glad to hear it's working well for you!
Yep, it's supposed to turn off entirely. Unfortunately, HTC devices seem to have their own method of shutting down, and the method I tried to use didn't work. I haven't been able to find any information on how to do a proper shutdown for HTC devices, but I've been looking and asking around and I'll implement a bugfix as soon as I figure it out.
Click to expand...
Click to collapse
OK. My Omnia is from Samsung so I imagine the fix for HTC might not work for me. I'll look around for the needed info on the Omnia.
I just tried the version tied to the power button also but the power button option does not work for me. Perhaps a different button location for the Omnia.
The power button CAB just adds a shortcut called Long_Power.lnk to the \Windows\ directory. I guess this doesn't work with the Omnia? I'd be happy to fix that too if someone knows of a more universal way to do it. I'm new to all of this and still firmly in novice territory as a programmer, so I'm way behind everyone else here.
If you have Advanced Config installed, are you able to go to Menu> More settings> Key mapping and map "Long press Power key" to it?
Cythrelo said:
The power button CAB just adds a shortcut called Long_Power.lnk to the \Windows\ directory. I guess this doesn't work with the Omnia? I'd be happy to fix that too if someone knows of a more universal way to do it. I'm new to all of this and still firmly in novice territory as a programmer, so I'm way behind everyone else here.
If you have Advanced Config installed, are you able to go to Menu> More settings> Key mapping and map "Long press Power key" to it?
Click to expand...
Click to collapse
No. Long press Power key is grayed out.
Sorry, I'm out of ideas then. Until I can find a solution, you could try AE Button Plus to remap the power button. The trial version will work, if you don't mind a splash screen when it starts.
One more thought, do you already have something like psShutXP or xdaShutdown installed and mapped to the power key? It's possible they may be overriding it.
Cythrelo said:
Sorry, I'm out of ideas then. Until I can find a solution, you could try AE Button Plus to remap the power button. The trial version will work, if you don't mind a splash screen when it starts.
One more thought, do you already have something like psShutXP or xdaShutdown installed and mapped to the power key? It's possible they may be overriding it.
Click to expand...
Click to collapse
I do have psShutXP installed. I'll see about removing that.
Removing psShutXP did not help.
Subscribing to thread and awaiting bugfix.
WB

[ROM][WWE][WM 6.5][SYS 23409][Clean ROM][15.SEP.2009]Arkl_ROM_v1.2 for Raphael GSM

WM 6.5 Clean ROM based on SYS 23409 - Arkl_ROM_v1.2 for Raphael GSM - 15.SEP.2009
Build: 23409 WM6.5
Version 1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
=======================================
Version 1.1
=======================================
Changeset 15-Sep-2009:
New Keyboard
Video and Youtube issues fixed
Packages:
MODEMLINK
MSTag
NetCF
Office
OneNote
RemoteDesktopMobile
RingsAndAlerts
Skybox
Skymarket
SqlCeMobile
VoiceCommand
VoIP
VoIPOS
Webview
WindowsLive
WindowsLiveIM
World Card Mobile
Advanced Config Tool 3.3
AdvancedPowerManagement
aGPSConfirmation
Album_3_0
Arcsoft_MMS_WM65_5
AudioBooster
AudioManager
BootLauncher
CAMERA
CommManager
ContactUtilityEngine
Keyboard_EzInput 2
FacebookEngine
FMRadio
Full_Screen_Player
GPSTool
GSensorCalibrator
HTCCalculator
HTCMessage
HTC_AlarmAlertRing
HTC_EmailSetupWizard
InCallRecorder
JbedJava_5
Labyrinth
Manila_2_1
MenuEnhancement
Message_Enhancement
NewMailAccount
New_Contact_Card
Notification_Enhancement
Opera_Browser_9
OutlookEnhancement
PHM Notepad
PhoneCanvas_Tachi
Picture_Enhancement
PIM Backup 2.8
QuickGPS
Raph_1.14.25.35_rilphone
SmartTouch
Task_Manager
Total Commander 2.51
VoiceRecorder
YouTube
Notes:
Tap Icons (for 2 seconds) on Start Menu and drag to your desired order to organize Start Menu
Tap on Time to get Task manager
if you customize TF3D Tab position or need to restart TF3D,
please do hard reset in order to position TF3D properly.
HardSPL is required prior to flashing this ROM
This ROM is valid on GSM versions only
Radio preferred: 1.14.25.35
Hardware Buttons Behavior:
Hardware "Home" button will open WM 6.5 Menu
Hardware "Call" button will open Tachi Dialer
Hardware "Call End" Button will open TF3D Home Tab
ROM DOWNLOAD:
Version 1.2
rapidshare
http://rapidshare.com/files/280607102/Arkl_ROM_v1.2_23409WWE_15SEP09.rar
Version 1.1
rapidshare
http://rapidshare.com/files/276149742/Arkl_ROM_v1.1_23409WWE_05SEP09.rar
MANILA 2.1:
For Manila 2.1 related Issues/Fixes please refer to this thread
http://forum.xda-developers.com/showthread.php?t=542113
CABs:
Disable Manila Start Menu.cab
http://www.u2d.in/RAPH/RAPH_StoneAge/cabs/DisableManilaStartMenu.cab
Enable Manila Start Menu.cab
http://www.u2d.in/RAPH/RAPH_StoneAge/cabs/EnableManilaStartMenu.cab
Hide Programs Tab.cab
http://www.u2d.in/RAPH/RAPH_StoneAge/cabs/HideProgramsTab.cab
Show Programs Tab.cab
http://www.u2d.in/RAPH/RAPH_StoneAge/cabs/ShowProgramsTab.cab
Bugs and Fixes:
1. Owner information is missing
Use Tools --> RegTweek and click update. (v1.2)
trying it out man - will know how it goes.
Thanks! i'll try it, looks good
sahiljain22 said:
trying it out man - will know how it goes.
Click to expand...
Click to collapse
Hey - couple of things
1. All in all, excellent ROM.
2. Minor suggestions -
- I'd like to remove stuff like fring because I don't use it. In the future versions, is it possible to install it via a cab so that i can uninstall it?
- Maybe organize the apps into specific folders (other than one folder called tool)?
- ATT Fuze KB didn't work out of the box (cab fix works). Perhaps mod this?
- Remove the horizontal lines in the today screen for non-manila, non-chrome users?
Other than that, think of adding a "donate" link
sahiljain22 said:
Hey - couple of things
1. All in all, excellent ROM.
2. Minor suggestions -
- I'd like to remove stuff like fring because I don't use it. In the future versions, is it possible to install it via a cab so that i can uninstall it?
- Maybe organize the apps into specific folders (other than one folder called tool)?
- ATT Fuze KB didn't work out of the box (cab fix works). Perhaps mod this?
- Remove the horizontal lines in the today screen for non-manila, non-chrome users?
Other than that, think of adding a "donate" link
Click to expand...
Click to collapse
Lets gather all the comments, and cook it on next version.
for donate link, i am doing this for my raphael phone and i am not able to test each and everything on my Raphael, so i just publish and let others to test the ROM with me and use their feed back to make my ROM better. so i don't think i am in need of donation
No Owner Info?
Arkl, I've just flashed your Rom. I notice that there is no Owner information in Personal settings. Please include it on your next release and also include htc torch. Nice Rom. Thnx
due u have video caling in that rom ?
This firmware will work on the P4350 Herald?
Hey Arkl, Under the notes section right, where it says "if you customize TF3D Tab position or need to restart TF3D,
please do hard reset in order to position TF3D properly"
whats that mean exactly b/c I dont think I quite follow. I want to flash to your rom but just want to make sure of some things before I do so. only b/c at this point my phones using another rom an my phones running well so I dont want to go to another rom an have issues etc... Thank you very much I appreciate it!! Happy Labor Day!!
Also if anyone else who's running this rom, what bugs/issues do you have or notice?
4ekuct said:
This firmware will work on the P4350 Herald?
Click to expand...
Click to collapse
No, you need to look in the Herald ROM forum for those:
http://forum.xda-developers.com/forumdisplay.php?f=349
You cannot put a ROM on a different device without some major rebuilding of 75% of the ROM.
MRFERRARI23 said:
Hey Arkl, Under the notes section right, where it says "if you customize TF3D Tab position or need to restart TF3D,
please do hard reset in order to position TF3D properly"
whats that mean exactly b/c I dont think I quite follow. I want to flash to your rom but just want to make sure of some things before I do so. only b/c at this point my phones using another rom an my phones running well so I dont want to go to another rom an have issues etc... Thank you very much I appreciate it!! Happy Labor Day!!
Also if anyone else who's running this rom, what bugs/issues do you have or notice?
Click to expand...
Click to collapse
this is the latest leaked sys/xip 23409 build, so expect bugs, and please report here if you found bugs and comments to tune this rom perfect, just not the bugs, if you guys know fix as well, please post it.
for the TF3D issue, i think u guys noticed the start and close button Microsoft has been moved to bottom, and the height of the bottom bar also increased, and top bar (status) size got decreased as well, so TF3D will not position well, it will have a small space between top status bar and TF3D, to resolve this issue i am using an EXE file (thanks to bikeandestroyx) and its run on windows start up and move the TF3D window certain pixels up.
when u restart TF3D (for me i shuffle positions of tabs for my convenience) u also need to run this file (to make it easy, just restart the phone, and things will be alright).
i think u got it clear. please feel free to post your comments/questions/advice/fix....
Arkl said:
this is the latest leaked sys/xip 23409 build, so expect bugs, and please report here if you found bugs and comments to tune this rom perfect, just not the bugs, if you guys know fix as well, please post it.
for the TF3D issue, i think u guys noticed the start and close button Microsoft has been moved to bottom, and the height of the bottom bar also increased, and top bar (status) size got decreased as well, so TF3D will not position well, it will have a small space between top status bar and TF3D, to resolve this issue i am using an EXE file (thanks to bikeandestroyx) and its run on windows start up and move the TF3D window certain pixels up.
when u restart TF3D (for me i shuffle positions of tabs for my convenience) u also need to run this file (to make it easy, just restart the phone, and things will be alright).
i think u got it clear. please feel free to post your comments/questions/advice/fix....
Click to expand...
Click to collapse
Hey thanx for getting back to me an explaining to me what I asked earlier!! As for your mention that this is the newest leaked wm6.5 build and to expect bugs, what bugs do you think should be expected?? other then that keep up the good work an I hope to see your rom get good praise an reviews!! lets everyone post what we find so we can help get this rom as close to perfect!!
Arkl said:
Lets gather all the comments, and cook it on next version.
Click to expand...
Click to collapse
Couple of more things -
1. I feel the responsiveness of the phone falls down whenever it rings. It took me about 10 seconds to answer a call yesterday after I noticed my phone ringing and started pushing the green button. It may be with the dialer, but just letting you know as fyi.
2. I saw that you assigned "Tasks" to the hold-and-press action of the call button, but it would be a good idea to have the task manager assigned to that or some other button. Again, it's a personal preference that I think others may like. Maybe the PTT button?
3. Love the smooth animation between some windows.
Just started trying out, run into first problem.
- Unable to install signed Opera Mini
Downloaded from http:mini.opera.com/mini.jad?rnd=1555487862&region=en-gb&cert=all&rel=4
Java opens, asks for permissions and install location, then stops before reporting Server Error (504) - 89.
Solution was to clear the entry in HKLM\Software\Apps\Esmertec Java\Properties\com.sun.midp.io.http.proxy
No Owner Information in Personal Settings...
ManilaPrint said:
Arkl, I've just flashed your Rom. I notice that there is no Owner information in Personal settings. Please include it on your next release and also include htc torch. Nice Rom. Thnx
Click to expand...
Click to collapse
This rom is verry stable and fast. I have used it since yesterday. Everything is nice and fast. But I need really the Owner Information for register my programs i have installed. Is there somebody can make a cab file for it or something..?
ManilaPrint said:
Arkl, I've just flashed your Rom. I notice that there is no Owner information in Personal settings. Please include it on your next release and also include htc torch. Nice Rom. Thnx
Click to expand...
Click to collapse
This rom is verry stable and fast. I have used it since yesterday. Everything is nice and fast. But I need really the Owner Information for register my programs i have installed. Is there somebody can make a cab file for it or something..?
Looks like HTC volume control does not work(or is missing completely). Shows ugly default popup.
Is there any way to fix it?
Aside of that, very good ROM. Thanks.
And yes, +1 vote to remove fring.
seems like Microsoft keep changing their button location and size of top and bottom bars as well, i think we should wait till it get finalized
karaoglan6 said:
This rom is verry stable and fast. I have used it since yesterday. Everything is nice and fast. But I need really the Owner Information for register my programs i have installed. Is there somebody can make a cab file for it or something..?
Click to expand...
Click to collapse
This application was disabled by Microsoft, no idea why (may be there is new interface coming for it, i think that's y they put redirect option)
to get Owner information back, Delete "Redirect" registry entry from [HKEY_LOCAL_MACHINE\ControlPanel\Owner]
use total commander on tools to do the above
Thanx!
Arkl said:
This application was disabled by Microsoft, no idea why (may be there is new interface coming for it, i think that's y they put redirect option)
to get Owner information back, Delete "Redirect" registry entry from [HKEY_LOCAL_MACHINE\ControlPanel\Owner]
use total commander on tools to do the above
Click to expand...
Click to collapse
I follow this instruction, now I have my Owner Info in Personal settings. Thnx for the tips!

[VGA]New Huashan Phone Canvas Enhancement Ported

Hello all, here is the newest Phone_Canvas_Enhancement_5_0_61220152721_0 from Huashan ported to VGA. All credit go to WoZZeR999 for his port ,pyrorob for his porting template(a phcanrc.dll from Leo Phone Canvas) and amarullz for his phcanvga.exe!
Why this one:
1. It supports WM6.5.3(231XX) natively. No more Caller ID issue or graphical glitches.
2. It supports video call.
Why not the one from Oboe(seems much newer):
1. It has dual SIM support thus if we want to use it we need to get rid of its dual SIM support(e.g. hex edit), otherwise we can't even make a call.
2. It doesn't support video call.
The attached zip has two packages inside: Phone_Canvas_Enhancement_5_0_61220152721_0(Phone Canvas itself), Video_Telephony_3_0_38566_0(a dependency of the Phone Canvas).
All packages are with 0804 localization, 0409 localization attached seperately.
Please download the phcanrc.dll attached and replace the one in the original package to get VGA resolution. And please make the phcanvga.exe start on boot(put a link in /Windows/StartUp).
This Phone Canvas won't work on AKU versions other than 6.5.3.
Again thanks WoZZeR999 for his port!
The Haushan rom doesn't need the ipdial package, just for info. It does need the Video Telephony package.
The package seems to be very similar to the leo 2g stuff, so it may be possible (if the leo 2g was converted to vga) to just replace a few files with the leo ones (anything that has dialog and image resources).
WoZZeR999 said:
The Haushan rom doesn't need the ipdial package, just for info. It does need the Video Telephony package.
The package seems to be very similar to the leo 2g stuff, so it may be possible (if the leo 2g was converted to vga) to just replace a few files with the leo ones (anything that has dialog and image resources).
Click to expand...
Click to collapse
Ok, I will remove the IP dial package. But there is a option in the Phone Canvas menu to open IP dial.
I guess the resources inside the dlls have changed a lot, simply replacing files doesn't sound good and we will lose 6.5.3 compatibilty.
And it's "Huashan" instead of "Haushan", Huashan is a famous mountain in China, literally translated as "Hua Mountain".
Sorry, my mistype.
I know that the CMYLXGO Leo 2g dialer skins it perfectly. -- After looking at it, phcanImages probably does not have any of the screen res stuff in it, so my mistake.
I'm using Phone_Canvas_Enhancement_5_0_61220142530_0, so I don't know if they added IP Dialer, but I don't need it to make calls. (No option shows up for it either)
WoZZeR999 said:
Sorry, my mistype.
I know that the CMYLXGO Leo 2g dialer skins it perfectly. -- After looking at it, phcanImages probably does not have any of the screen res stuff in it, so my mistake.
I'm using Phone_Canvas_Enhancement_5_0_61220142530_0, so I don't know if they added IP Dialer, but I don't need it to make calls. (No option shows up for it either)
Click to expand...
Click to collapse
IP dialing in the right soft key menu in 0804 mui. Basically, we only need to port phcanrc.dll.
If you can attach the most recent vga phcanrc file, I can try my hand at editing the Huashan phcanrc.dll for you.
WoZZeR999 said:
If you can attach the most recent vga phcanrc file, I can try my hand at editing the Huashan phcanrc.dll for you.
Click to expand...
Click to collapse
Oh really? Thanks! I attached the most recent ported Qilin Phone Canvas Enhancement(which is the most like Huashan one) phcanrc.dll. phcanvga.exe also(the program to push the phone canvas upwards, you can ignore it, I just upload in case).
I can transfer most of the dialog boxes over, but there's 5 more in the Huashan, and without a vga device I can't test them. I'll have this done in a few minutes, so you can test if it mostly works, and give screen shots of stuff that doesn't.
WoZZeR999 said:
I can transfer most of the dialog boxes over, but there's 5 more in the Huashan, and without a vga device I can't test them. I'll have this done in a few minutes, so you can test if it mostly works, and give screen shots of stuff that doesn't.
Click to expand...
Click to collapse
Ok, great, I've just tried that phcanrc.dll that I attached before, but not thinking it good. So I have another dll for you, you may also do some modifications. The attached phcanrc.dll here is almost perfect, but it may be different from Huashan one, hope you can have a look at it and try to use it as a template.
Thanks!
This one looks much better. The other one you posted didn't look like it was really changed much (still had 800x480) dialog boxes.
WoZZeR999 said:
This one looks much better. The other one you posted didn't look like it was really changed much (still had 800x480) dialog boxes.
Click to expand...
Click to collapse
Yeah, the latter one I posted is really working like a charm for me!
Ok, I've got a real quick hackjob here for you to test. Let me know if this works for you (and screen shots of parts that don't work).
You'll have to rename it (I had to name the different phcan's in the folder so I knew what was from what)
WoZZeR999 said:
Ok, I've got a real quick hackjob here for you to test. Let me know if this works for you (and screen shots of parts that don't work).
You'll have to rename it (I had to name the different phcan's in the folder so I knew what was from what)
Click to expand...
Click to collapse
Wow that's fascinating! Cooking as I type, will tell you the result, thanks!
I hope it works. It looked like most of the dialog boxes were the same (with just some re-arranging for VGA). Same ID numbers for the buttons and stuff (but different dialog box ID).
Edit: It shouldn't matter, but I used the Phone_Canvas_Enhancement_5_0_61220142530_0 which is 2014, and the one you posted is 2015.
WoZZeR999 said:
I hope it works. It looked like most of the dialog boxes were the same (with just some re-arranging for VGA). Same ID numbers for the buttons and stuff (but different dialog box ID).
Edit: It shouldn't matter, but I used the Phone_Canvas_Enhancement_5_0_61220142530_0 which is 2014, and the one you posted is 2015.
Click to expand...
Click to collapse
What I want to say is just: cool! Portrait almost perfect except this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The three buttons should be moved up a bit, to center in the dialog.
And landscape is quite unusable, like:
I am not quite sure if you can fix the landscape(it might just not support landscape).
Hope you can fix these bugs, and maybe re-port from 2015 dll? 2015 dll may work better.
Thanks for you port!
I'll give the 2015 a shot. But the same errors may come up (since I'm just doing a quick hack until I can see what's wrong with it).
Edit: Here's another attempt at it, with the 2015 DLL. I didn't move any buttons, but I did pay closer attention while I was moving stuff. Hopefully this fixes the landscape issue.
Edit2: Also, can you show me a landscape of how it's supposed to look?
Edit3: I think the problem is the keypad on the 2014 Phone canvas, it doesn't look correct on my Rhod either. The pad is blank, like in your screen shot. This may happen in the 2015 as well. I have a package for Phone Canvas 5.1, but I can't seem to get it working.
WoZZeR999 said:
I'll give the 2015 a shot. But the same errors may come up (since I'm just doing a quick hack until I can see what's wrong with it).
Edit: Here's another attempt at it, with the 2015 DLL. I didn't move any buttons, but I did pay closer attention while I was moving stuff. Hopefully this fixes the landscape issue.
Edit2: Also, can you show me a landscape of how it's supposed to look?
Edit3: I think the problem is the keypad on the 2014 Phone canvas, it doesn't look correct on my Rhod either. The pad is blank, like in your screen shot. This may happen in the 2015 as well. I have a package for Phone Canvas 5.1, but I can't seem to get it working.
Click to expand...
Click to collapse
Ok, I'm recooking, will tell you whether the save to contacts dialog issue still persists.
Guess we should stop playing with landscape, I found the dialer trying its best to rotate back to portrait lol.
Never expected it would be done this quick, thanks!
That 5.1 is the one from Oboe, and as I said in #1:
Why not the one from Oboe(seems much newer):
1. It has dual SIM support thus if we want to use it we need to get rid of its dual SIM support(e.g. hex edit), otherwise we can't even make a call.
2. It doesn't support video call.
Click to expand...
Click to collapse
WoZZeR999 said:
I'll give the 2015 a shot. But the same errors may come up (since I'm just doing a quick hack until I can see what's wrong with it).
Edit: Here's another attempt at it, with the 2015 DLL. I didn't move any buttons, but I did pay closer attention while I was moving stuff. Hopefully this fixes the landscape issue.
Edit2: Also, can you show me a landscape of how it's supposed to look?
Edit3: I think the problem is the keypad on the 2014 Phone canvas, it doesn't look correct on my Rhod either. The pad is blank, like in your screen shot. This may happen in the 2015 as well. I have a package for Phone Canvas 5.1, but I can't seem to get it working.
Click to expand...
Click to collapse
The new one is not working, see the screenshot:
It's getting late here, I got the 2 (landscape and portrait) backwards. I think I may know what's causing the landscape problem as well. Give me a few minutes
Edit: This *SHOULD* be correct. I checked it after against the original phcanrc.
WoZZeR999 said:
It's getting late here, I got the 2 (landscape and portrait) backwards. I think I may know what's causing the landscape problem as well. Give me a few minutes
Edit: This *SHOULD* be correct. I checked it after against the original phcanrc.
Click to expand...
Click to collapse
This one works just like the 2014 one you posted, landscape not working but that's alright, in portrait mode, that Save Contact dialog still has the issue.
Maybe we should make it perfect tomorrow to let you catch some Zs for now?
Thanks!

Categories

Resources