Hey guys. I tried to flash my Raphael with an english rom to the reconstructed german rom. It transefered the Data restarted and now it's stuck in the Bootscreen.
Can anyone help me? :'(
just reflash via a SD card
and it should be ok
Thanks for ur reply. But antoher short question. Do u have an idea how to get into the tri coulour screen?
And in the instructions to flash from sd cards stand tat i got to wait till i can configure the screen, but that doesn't happen. shall i just restart?
hold down the vol down button and keep it pressed down
then use the stylus to press and let go of the soft reset button
let it boot to the tri colour screen and then let go of the vol down
and how to flash via sd
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do).
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer.
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card.
5. Plug the microSD Card into the phone.
6. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears.
7. Follow the onscreen instructions to start flashing.
8. Once phone finishes flashing and gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
9. Follow onscreen instructions to set up your New Rom.
Related
there is nothing in the wiki or anywhere that explains how to hard reset (unles i just missed it somewhere)
Not sure if they apply to the CDMA but here are the ones from the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
I use a variation of those on my GSM RAPH, try #1 to see if it works for your CDMA RAPH:
1) Hard Reset
- Turn off
- Press & hold Action
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release buttons
- Follow onscreen instructions
2) Bootloader for Flashing new NBH
- Turn off
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release button
- Start ROM Flash utility on PC. If flashing a RAPHIMG.NBH on SDCard, flash begins automatically.
HTH,
For my sprint tp, I've found the easiest way is with the device turned off, I press the vol. down then the center of dpad while holding both then press the on/off button holding all three untill the onscreen instructions appear.
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Tregrad said:
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Click to expand...
Click to collapse
Do you happen to have a Verizon Touch Pro, if so the only way to Hard Reset is to do Clear Storage under Settings, System.
Why won't this feature work on my phone, I have put the update.pkg on the root of my sd card, but when I select the option in the menu the screen just goes blank and does nothing?
I'm sure to go in to factory reset or update via sd card u hold volume rocker and the power button .
Sometimes it dosent find the update file on the sd card u have to try a few times or leave the phone to rest for a while before u try and update again.
finding update on sd card
Yes, when you are going to boot you press and hold both volume buttons and press the power button also
Continue pressing until your menu comes and it should automatically have the option highlighted to update.
You then press the camera button to choose what is highlighted. What should come up is a menu of what is on your SD card and there you should see your "update.pkg" file. You use your volume keys to scroll up and down the menu.
Once you have highlighted the correct file, you once again press the camera button and the process should begin.
Im pretty sure this is the right procedure, I haven't done it in a while because I have StreakMod installed, which is just a different recovery image, but the manipulation of the recovery process is the same.
Please correct me people if I'm wrong...
You're essentially correct. However, there is no file list that pops up when you hit the update option. What does pop up is a mention that you're going to flash the update, and to hold the volume up button down to shut the Streak off if you don't want to.
Cheers guys figured it out, seemed to work fine after I flashed the recovery image in flashmode.
please help i have motorola atrix 4g at&t and please the link of neutrino or codename rom :c
if you are in CM9 that means, you have a rooted and bootloader unlocked atrix with CWM recovery. I will help you buddy...
PREPARE YOUR PHONE FOR FLASH THE ROM;
-make sure you have installed the drivers of motorola. It is recommended for your pc to recognise your phone when you connect it.
-(I recommend GT version, it is FAST and battery life is great! Better than EE.) Download the rom and the addons on the link>> http://forum.xda-developers.com/showpost.php?p=26657806&postcount=7819
-put the files in your SD CARD.( put the .zip files to your SD CARD, do not extract!)
-PREPARE yourself for the flashing
1) FULL WIPE
- https://www.dropbox.com/s/1tgt2yax88rp2mi/Moto-Fastboot FULL WIPE.rar <<< DOWNLOAD THIS.
-Power off your phone.
-open your phone in FASTBOOT mode. (press power button and volume down at the same time until you see 'Fastboot' on the screen, then press Volume up to activate it. Connect your phone to your PC.
-RUN the "Moto-FB Full Wipe.bat" and follow the instructions. (I remember that you should only press ENTER )
2)FLASHING ROM
-Power off your phone and POWER ON with POWER ON+VOLUME DOWN again.
-When you see Fastboot, Navigate with the power down button until you see ANDROID RECOVERY. (I think you should press 7 times to power down to see, if you pass it do not press up to go back just keep pressing vol down to see it again.) When you see Android Recovery Press VOL UP to enter the recovery.
-navigate to 'install .zip from sd card' with using vol up or down then press POWER ON button to enter.
-'choose .zip file from sd card' and power on button to enter again.
-find your Neutrino2.8GT.zip file and press power on!
-It will install in 15-20 seconds.
-then install the ADDONS by following the same method. (install zip from sd>choose zip from sd>default camera apk(that was the one of the addons.)) You may install all of them or some of them, depends on you. But just install them all
-after you done, reboot your phone by selecting 'reboot the phone' in the CWM recovery menu.
-ENJOY YOUR AWESOME ROM.
PRESS THE "THANKS" IF I HELPED! :angel:
So I tried rooting my alcatel t10 using this method http://forum.xda-developers.com/showthread.php?t=1886460 and after choosing normal, and the alcatel turned off, automatically turned back on, showed the logo now it's just a blank screen that's on, any help please?
Hi,
Can you enter stock recovery or bootloader ?
If you can,
did you try to clean cache or factory data/reset ?
XPACT123 said:
Hi,
Can you enter stock recovery or bootloader ?
If you can,
did you try to clean cache or factory data/reset ?
Click to expand...
Click to collapse
I'm very new with the Alcatel t10, can you tell me how to do any of those?
tails100 said:
I'm very new with the Alcatel t10, can you tell me how to do any of those?
Click to expand...
Click to collapse
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
XPACT123 said:
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
Click to expand...
Click to collapse
It doesn't appear, I tried looking for another method like sw update via sd card but I cannot find everywhere I look I cannot find the update.rar or something.
tails100 said:
It doesn't appear, I tried looking for another method like sw update via sd card but I cannot find everywhere I look I cannot find the update.rar or something.
Click to expand...
Click to collapse
Ok so phone was off, and holding power button + volume down (until that android appears or something) doesn't work ?
XPACT123 said:
Ok so phone was off, and holding power button + volume down (until that android appears or something) doesn't work ?
Click to expand...
Click to collapse
Yep it was off.
Edit: Tried it with - and the android with the belly showed up now I'm stuck at the android, pressing the - won't help, same goes for +.
Okay, after holding Vol down + Power while booting, you will see the android logo with damaged belly, during this time, press power and vol up at the same time, the menu shall appear.
tails100 said:
Yep it was off.
Edit: Tried it with - and the android with the belly showed up now I'm stuck at the android, pressing the - won't help, same goes for +.
Okay, after holding Vol down + Power while booting, you will see the android logo with damaged belly, during this time, press power and vol up at the same time, the menu shall appear.
Click to expand...
Click to collapse
Ok so did you clear cache ?
XPACT123 said:
Ok so did you clear cache ?
Click to expand...
Click to collapse
Didn't help, so I just did a factory reset.
XPACT123 said:
I don't own alcatel, but usually you enter boot menu by holding power on + volume down button while phone is booting.
You should see android with yellow triangle (it may differ).
From there menu should pop up when you press both volume up and down.
Use volume up/down to navigate trough menu and power button/camera button to select.
Select clear cache first and then try to reboot.
EDIT :
I found this :
Alcatel One Touch T10 must be OFF
REMOVE SD CARD
2 STEPS
1. PRESS POWER ON & VOLUME DOWN simultaneously
(WAIT UNTIL THE ANDROID CHARACTER SHOWS UP(WITH DAMAGE BELLY).
2. PRESS VOLUME DOWN ALONE 5 TO 10 TIMES OR UNTIL THE OPTION SHOWS UP.
(USE VOLUME -/+ FOR SELECTION AND POWER ON/OFF OKAY/ENTER)
Btw removing SD card isn't necessary but sometimes it can format sd card too so it is just to be on safe side if you have a lot of data on SD CARD.
Click to expand...
Click to collapse
I tried following the instructions above but no android logo or icon is showing up. It only displays 'alcatel one touch' then 'loading' and then 'alcatel one touch' again. I was locked out of my device because of too many pattern attempts issue. I just want to hard reset my tab but i cant get to recovery mode. What else can i do? Need help pls.
---------- Post added at 03:17 PM ---------- Previous post was at 03:12 PM ----------
I know its off topic but i just need help to get to recovery mode/boot menu first
Can anyone please help me for a solution to recover my phone from it's bootloop state, I tried factory reset from stock recovery but it doesn't help, phone still unable to boot to homescreen. Been looking all over the Internet but no luck finding the firmware for ZTE blade S7 t920. I haven't enable the USB debugging on the settings so my pc doesn't detect the phone
Not sure if you manage to sort out you problem yet but you can download a ROM from the ztedevice dot com website and copy the update.zip file to the root directory of your memory card then you do the following:
Forced upgrade (for the phones that cannot be started or the phones that cannot enter standby state)
1) For a powered-off phone, press and hold both the volume key + and power key to enter into Recovery mode.
2) Press the volume key - to select apply update from sdcard, and press the power key to confirm it.
3) Press the volume key - to select the update.zip file, and press the power key to confirm it. The phone completes the upgrade process in about three minutes.
4) On the Upgrade Complete screen, select reboot system now and press the power key to confirm it.