Related
I installed the dcd 2.1.0 verizon rom with the v3.27.0 radio (following these instructions:
http://www.phonenews.com/how-to-add-gps-to-htc-mogul-xv6800-p4000-titan-2663/)
and everything went fine but now my device is freezing up and generally not acting healthy. Can anyone vouch for this set up and/or recommend the best current rom for verizon? Im not too concerned with having GPS available (but would be nice), I would really like to have a nice no junk rom above all else. Thanks for any advice.
I haven't had good luck with any of the gps/reva roms on verizon... Seems every rom combination has it's share of quirks/bugs it's just a matter of finding the one that has some u can live with
I'm yet to find one that is FLAWLESS... if you find one let me know!
I have flashed several VZW xv6800s. If you have the 3.35 radio just flash DCDs latest (3.0.4). It runs very smooth. I have no issues except sometimes the GPS fix takes longer. It does everything else. Make sure you Hard reset after flashing.
Edit: sorry guys, was not thinking as i typed. I meant 3.35 radio (the one from the sprint update). Flash the 3.35 or 3.37 radio!
I would suggest using the latest ROM as well. Seems to have made a difference with battery life to me.
mdjkim said:
I would suggest using the latest ROM as well. Seems to have made a difference with battery life to me.
Click to expand...
Click to collapse
interesting how u guys on vzq have no problems with the reva radios... I was running 3.0.4 for quite a while until I finally canned it because I couldn't deal with apps crashing when switch to other procs... I went back to 1.7 to see if there was a problem there too but everything runs good it seems... am having bluetooth problems locking up device sometimes though so now I'm back to vzw stock radio to see if that fixes things? Actually I have no idea if bluetooth would be affected by radio or not but I'm desperately trying to find a stable setup.
I have flashed several VZW xv6800s. If you have the 3.27 radio just flash DCDs latest (3.0.4). It runs very smooth. I have no issues except sometimes the GPS fix takes longer. It does everything else. Make sure you Hard reset after flashing.
Click to expand...
Click to collapse
This is VERY bad advice and will only screw your phone up even more. It says in numerous places on these boards that 3.27 radio is NOT compatible with 3.x.x roms. The only roms that will work with the 3.27 radio are the 2.x.x roms.
My question to you though is why on god's green earth are you still wanting to run a 2.x.x rom with the old crappy buggy beta radio 3.27? Just update with the alltel updater to get radio 3.37.20, don't let customizations run, then flash dcd 3.0.4...much much better and will probably fix your gps problems.
corey113888 said:
I have flashed several VZW xv6800s. If you have the 3.27 radio just flash DCDs latest (3.0.4). It runs very smooth. I have no issues except sometimes the GPS fix takes longer. It does everything else. Make sure you Hard reset after flashing.
Click to expand...
Click to collapse
Danger!
radio 3.27 is NOT compatible with dcd 3.0.4 rom!!!
1) radio 1.30 or radio 1.40 = use dcd 1.7 (non gps rom)
2) radio 3.27 radio = use ONLY dcd 2.x.x series roms (with gps , revA - experimental)
3) radio 3.37 radio = use dcd 3.0.1 or 3.0.4. (gps and revA official)
my recommendation would be option 1 or 3. Depending on whether you want gps or not.
Zenoran said:
interesting how u guys on vzq have no problems with the reva radios... I was running 3.0.4 for quite a while until I finally canned it because I couldn't deal with apps crashing when switch to other procs... I went back to 1.7 to see if there was a problem there too but everything runs good it seems... am having bluetooth problems locking up device sometimes though so now I'm back to vzw stock radio to see if that fixes things? Actually I have no idea if bluetooth would be affected by radio or not but I'm desperately trying to find a stable setup.
Click to expand...
Click to collapse
Zen,
I think you might be the victim of a dodgy titan. I was, like you, using 1.7 for the longest time because I couldnt put up with the buggy 3.27 radio. So i just stayed non gps until the new radion 3.35 came out and dcd released 3.x.x series of roms. Since then I bit the bullet and went back to gps rom. I didn't look back. So far dcd rom 3.0.4 + radio 3.37 (alltel) has been the best (i.e reliable) rom setup I have experienced since I was on dcd 1.7.0. I think they are both equal now, except that I have gps enabled now and I dont need to carry my gps with me all the time.
The internal gps does SUCK the battery down kinda fast, but it is reliable. No bluetooth issues that I can see except that call quality is still sub-par but at least it connects without any trouble. If I am using the gps function in the car i use my BT gps because the BT radio uses a lot less juice than the internal gps receiver.
I have VZW just like you and gc, az clown etc and we all have similar good experience with the new setup. So the only other thing I could say about your titan problems is that it must be hardware. Try stock again and see if it clears up the problems then I would say that my reading of your situation is wrong. But from what you have said it seems right.
maccaberry said:
Zen,
I think you might be the victim of a dodgy titan. I was, like you, using 1.7 for the longest time because I couldnt put up with the buggy 3.27 radio. So i just stayed non gps until the new radion 3.35 came out and dcd released 3.x.x series of roms. Since then I bit the bullet and went back to gps rom. I didn't look back. So far dcd rom 3.0.4 + radio 3.37 (alltel) has been the best (i.e reliable) rom setup I have experienced since I was on dcd 1.7.0. I think they are both equal now, except that I have gps enabled now and I dont need to carry my gps with me all the time.
The internal gps does SUCK the battery down kinda fast, but it is reliable. No bluetooth issues that I can see except that call quality is still sub-par but at least it connects without any trouble. If I am using the gps function in the car i use my BT gps because the BT radio uses a lot less juice than the internal gps receiver.
I have VZW just like you and gc, az clown etc and we all have similar good experience with the new setup. So the only other thing I could say about your titan problems is that it must be hardware. Try stock again and see if it clears up the problems then I would say that my reading of your situation is wrong. But from what you have said it seems right.
Click to expand...
Click to collapse
Well, that's the thing.. when I go to stock everything I have no problems but am stuck with crappy wm6.0... I don't mind not having the gps so much but it def would be nice... However, I do hate having to run an older rom that isn't community-supported any longer due to newer releases...
I think my problem with 3.0.4 might have been the way I flashed the radio.. I was one of the original ones to actually get the dcd released radio installation to work and hadn't really looked back.... im wondering if maybe that was the problem... I might consider trying the sprint rom method to get the radio and then trying 3.0.4 again...
Other than that, I don't see any way to get a warranty replacement on the device if all the stock vzw stuff works without a problem.. only support I ever have logged with vzw for this device is the many many many times I've had hung data connections from switching back and forth to reva/non reva radios so much.... I long for a stable setup so I don't have to deal with this anymore
Other than that, I don't see any way to get a warranty replacement on the device if all the stock vzw stuff works without a problem.. only support I ever have logged with vzw for this device is the many many many times I've had hung data connections from switching back and forth to reva/non reva radios so much.... I long for a stable setup so I don't have to deal with this anymore
Click to expand...
Click to collapse
Now I'm not saying I condone this, but man...there are definitely ways to get warranty replacements even if everything works fine...
Just need to "screw things up" on your own Make it so your phone won't boot, bring it to a vzw tech center...cuz they won't know what the hell is wrong with it trust me...and bam they'll swap it out.
Edited my original post...
Also, i have had 2 replacement xv6800s. One was for white spot in the bottom left part of the screen. I had to call VZW and tell them they were out of replacements at the store. The other was replaced a week later for data not working.
Zenoran said:
Well, that's the thing.. when I go to stock everything I have no problems but am stuck with crappy wm6.0... I don't mind not having the gps so much but it def would be nice... However, I do hate having to run an older rom that isn't community-supported any longer due to newer releases...
I think my problem with 3.0.4 might have been the way I flashed the radio.. I was one of the original ones to actually get the dcd released radio installation to work and hadn't really looked back.... im wondering if maybe that was the problem... I might consider trying the sprint rom method to get the radio and then trying 3.0.4 again...
Other than that, I don't see any way to get a warranty replacement on the device if all the stock vzw stuff works without a problem.. only support I ever have logged with vzw for this device is the many many many times I've had hung data connections from switching back and forth to reva/non reva radios so much.... I long for a stable setup so I don't have to deal with this anymore
Click to expand...
Click to collapse
Zen,
go the 'official' route from stock. olipro 2.40. sprint 3.35 official (without allowing customizations) then flash dcd 3.0.4. If you still then have problems then we can isolate your flash before as a potential problem.
if you still have all the same issues then i really think its time for a new titan. If all is well then you can finally relax and enjoy the device.
Good luck
maccaberry said:
Zen,
go the 'official' route from stock. olipro 2.40. sprint 3.35 official (without allowing customizations) then flash dcd 3.0.4. If you still then have problems then we can isolate your flash before as a potential problem.
if you still have all the same issues then i really think its time for a new titan. If all is well then you can finally relax and enjoy the device.
Click to expand...
Click to collapse
Ya, I actually did the Sprint Flash this time around and things seem to be working better, to my surprise... Things seem to be running a lot better now compared to the radio hack I was using before... I imagine that's the reason dcd killed that link off the forums... although it didn't brick my phone, it obviously was crippling my device quite a bit.
Only thing that worries me (somewhat) about the sprint rom was that it changed the bootup screen (pre os load).. it's now black screen with red lettering showing versions... I have NO idea how that can be reverted back if I ever need to have this thing serviced. That sprint rom appears to totally changed the device.
Zenoran said:
Ya, I actually did the Sprint Flash this time around and things seem to be working better, to my surprise... Things seem to be running a lot better now compared to the radio hack I was using before... I imagine that's the reason dcd killed that link off the forums... although it didn't brick my phone, it obviously was crippling my device quite a bit.
Only thing that worries me (somewhat) about the sprint rom was that it changed the bootup screen (pre os load).. it's now black screen with red lettering showing versions... I have NO idea how that can be reverted back if I ever need to have this thing serviced. That sprint rom appears to totally changed the device.
Click to expand...
Click to collapse
Flashing of the pre-windows boot screens (i.e. the ones that show up around the time that the red lettered rom versions appear) are not part of the rom. You can't modify them with dcd's kitchen.
There are three options that you have.
1. You can create a mini rom with the splash screens in it that you can flash to the device. I dont know how to do it and dont really care to find out, but gcincotta knows how to do it and posted instructions a few days ago in another post. He can tell you how to do it.
2. You can use the ppcgeeks kitchen to create boot screens and then flash your dcd rom over the top.
3. Flashing a stock verizon, sprint, alltel etc rom will contain the splash screens and put them back on along with the correct (stock) radio and roms. Then you can take your very clean 'stock' titan back to the store for repairs or replacement without fear.
maccaberry said:
Flashing of the pre-windows boot screens (i.e. the ones that show up around the time that the red lettered rom versions appear) are not part of the rom. You can't modify them with dcd's kitchen.
There are three options that you have.
1. You can create a mini rom with the splash screens in it that you can flash to the device. I dont know how to do it and dont really care to find out, but gcincotta knows how to do it and posted instructions a few days ago in another post. He can tell you how to do it.
2. You can use the ppcgeeks kitchen to create boot screens and then flash your dcd rom over the top.
3. Flashing a stock verizon, sprint, alltel etc rom will contain the splash screens and put them back on along with the correct (stock) radio and roms. Then you can take your very clean 'stock' titan back to the store for repairs or replacement without fear.
Click to expand...
Click to collapse
Interesting.. I've never seen that changed other than this sprint rom... the stock VZW rom images I have just do the OS and Radio separately... I guess when/if I run into a situation where I need to revert back I'll worry about it then.. Until then, the newer boot screen is def cooler
gcincotta said:
Now I'm not saying I condone this, but man...there are definitely ways to get warranty replacements even if everything works fine...
Just need to "screw things up" on your own Make it so your phone won't boot, bring it to a vzw tech center...cuz they won't know what the hell is wrong with it trust me...and bam they'll swap it out.
Click to expand...
Click to collapse
gc, this is so true. The 'techs' at the verizon stores (bless their hearts) know nothing at all about the titan. you could go in there with a fully "sprintized' titan and seriously they wouldn't notice.
I found this out the first time I tried to flash. I thought I had bricked the device and took it to the "service center" verizon store near my location to get the data back working (yeah that's all the problem was, but I was a noob and didnt know better). They didnt have the slightest idea what to do to solve the problem. They screwed around with it for a while and gave it back, basically the same. they offered to switch it out for me, but I said i will try just a bit longer (and it had a customized 'colonel - ppcgeeks' rom on it - if you have ever seen one it is completely unmistakable - looks nothing like a verizon rom).
I went outside, called *8899 and got a service support tech to fix the phone over the air. The problem had just been the data account needed to be reset at their end. Not only did the guys in the store have no idea how to fix it, they didnt even notice that my device was clearly not stock.
Zenoran said:
Interesting.. I've never seen that changed other than this sprint rom... the stock VZW rom images I have just do the OS and Radio separately... I guess when/if I run into a situation where I need to revert back I'll worry about it then.. Until then, the newer boot screen is def cooler
Click to expand...
Click to collapse
Yeah, if you do the flashes separately the boot screen never change. I still had the original verizon boot screens until just recently when I did the upgrade to dcd 3.0.4. Its the running of the sprint installer that overwrites your verizon splash, not the rom or the radio themselves.
Anyway, i used the dcd kitchen to create my 3.0.4 rom and selected HTC animation. That creates a HTC splash to overwrite the sprint stuff, and then I did this and this and my machine looks sweet when it boots.
The instructions of how to load them is explained in the thread http://forum.xda-developers.com/showthread.php?t=379822
Enjoy. (I cant post pics of the screens because the xda database is busted at the moment)
Hi
whenever i open google maps and enable GPS
it'll stay as "seeking GPS satellites (0)" for like 5 minutes.
After..it'll say "GPS Active (0)"
well how can it be active if it's 0?
2 seconds later it goes back to the seeking message.
The weird thing is...when it says "GPS Active (0)" it brings me to random places in my city. Meaning it DID detect something, but then lost it immediately again.
i read the GPS guide and did whatever it said already. I had the GPS working a few weeks ago...now it's not working...even after reflashing with different ROMs.
Any help?
I am also unable to get a lock. I have Alltel and today I have tried going all the way back to stock and tried everything from 3.35, 3.39 and now I am back at 3.37 trying out ppcgeeks Titan_3.49. Everything is working great except no GPS. Using the GPS Viewer if I do a scan it does find the GPS radio on com4 but when I start it I never get a lock. I have also tried using BAF's and QuickGPS. Anyone have any idea how to get this working. At one time a while back I did have GPS working on this device.
Thanks,
mr.ellsworth
edit: I forgot to mention I also have tried out several of the differnt kitchens today in my quest to get the GPS working again including dcd 3.1.2
mr.ellsworth said:
I am also unable to get a lock. I have Alltel and today I have tried going all the way back to stock and tried everything from 3.35, 3.39 and now I am back at 3.37 trying out ppcgeeks Titan_3.49. Everything is working great except no GPS. Using the GPS Viewer if I do a scan it does find the GPS radio on com4 but when I start it I never get a lock. I have also tried using BAF's and QuickGPS. Anyone have any idea how to get this working. At one time a while back I did have GPS working on this device.
Thanks,
mr.ellsworth
edit: I forgot to mention I also have tried out several of the differnt kitchens today in my quest to get the GPS working again including dcd 3.1.2
Click to expand...
Click to collapse
I'm not sure if this will help - but I recently discovered that if ActiveSync is running while you are trying to get a lock - it will not lock. Stop ActiveSync with task manager and try again. I've been doing this for the last three days and get a lock every time now.
Try a free diagnostic's app such as VisualGPSce that will display the satellite status. Goggle Maps leaves you rather blind as to what is going on.
Sadly, we have discovered that not all Titans are equal and some have a hardware discrepency that greatly hinders the ability to clearly receive and lock onto the satellites. I've played with a few and my personal device consistently locks to 5 or more within seconds while another with identical software settings rarely if ever locks onto 3. Others have realised the same. Try waiting up to 30 minutes to see if any locks can be achieved -- if not then there's likely no software solution.
My kids are using the Moguls in our family. I removed a bunch of junk from the Sprint ROM but it is mainly as shipped. I cannot believe how fast the Moguls on Sprint acquire the satellites. It usually takes less than a minute and is often just a few seconds.
I use the Kaiser. It takes about 3 to 5 minutes sometimes to find the satellites. Sometimes I have to use the QuickGPS program to nudge it along.
With the Mogul, the fix is extremely quick. I wish my Kaiser was as quick.
I'm running a Mogul on Sprint w/ DCD 3.04. Locks take 10+ minutes, GPSViewer shows satellites immediately, but the lock just takes a while. I verified that ActiveSync is not running.
The Mogul was purchased in Nov/Dec last year.
wizzy99 said:
I'm running a Mogul on Sprint w/ DCD 3.04. Locks take 10+ minutes, GPSViewer shows satellites immediately, but the lock just takes a while. I verified that ActiveSync is not running.
The Mogul was purchased in Nov/Dec last year.
Click to expand...
Click to collapse
radio 3.35.04 took me 10+ minutes at times, 3.39.10 takes me 10 seconds.
It still takes me 10 mins to get a lock with 3.39.10, i use the GPS viewer to check for the lock.. Even with QuickGPS it takes about 10 mins.. Once it only took 6 seconds after that everything went to hell haha..
dcd1182 said:
radio 3.35.04 took me 10+ minutes at times, 3.39.10 takes me 10 seconds.
Click to expand...
Click to collapse
I just upgraded to 3.1.2/3.39.10 and google maps locks very quickly. GPSViewer still isn't very fast.
I upgrade to 3.1.2 and 3.39.10 and now my GPS is out by nearly 5 miles
Guys, 3.1.2 / 3.39.10 is not your issue if gps isn't working as good as you'd like it to. If anything, 3.39.10 is MUCH better in acquiring a fix. It's pretty much an unspoken fact that the gpsone chips inside these titans are spotty and some just work better than others. Sometimes mine gets a fix within seconds, sometimes it's 2 minutes. It's a combination of weather conditions, location of the satellites, and the gps hardware. These phones do not have SIRF chips in them...let's get over it.
It's np, I reinstall 3.35 radio and now gps work fine
Something about 3.39.10 and my gps chip doesn't like each other...
My inability to get over something not working correctly has led to getting things working correctly at least for now. Since I had had GPS working quite well under the 3.35 radio and knowing that I had been jumping all over the place with flashing different radios and kitchens in my never ending quest to try things out it occurred to me that I don't know all that much about what actually goes on during a reflash of a kitchen or radio etc... I thought it could be possible that during all the reflashes that not everything is cleanly removed and reflashed. Being an Alltel user I took my phone all the way back to stock which for me was the Alltel ROM “RUU_TITAN_ALLTEL_WWE_2.14.671.3_1.40.00_Altel_0816_NV132_Ship”. I got everything back up and running on this ROM. I ended up having to enter the MSID and MDN etc... I then unlocked the phone using "titan_SPL_2.40-olipro" next having had success using Sprints 3.35 radio I flashed “RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship” that radio back onto my phone and then flashed dcd's 3.01 kitchen. I then tried out the GPS and everything was working great. Having finally received my 2 gig micro sd card I reformatted it to fat32 with 1024 clusters and proceeded to flash the 3.39 radio using this method instead of using the test sprint ROM as I did before. I decided to try out a different kitchen this time and I put on ppcgeeks "Titan_3.49_WM6" then installed “dcd QuickGPS.cab” and "dcd VisualGPSce.cab" and my GPS is working better than ever. For all of you out there that still are having GPS problems I would recommend doing something similar to what I did here. I would be interested to hear if this helps.
mr.ellsworth
mr.ellsworth said:
My inability to get over something not working correctly has led to getting things working correctly at least for now. Since I had had GPS working quite well under the 3.35 radio and knowing that I had been jumping all over the place with flashing different radios and kitchens in my never ending quest to try things out it occurred to me that I don't know all that much about what actually goes on during a reflash of a kitchen or radio etc... I thought it could be possible that during all the reflashes that not everything is cleanly removed and reflashed. Being an Alltel user I took my phone all the way back to stock which for me was the Alltel ROM “RUU_TITAN_ALLTEL_WWE_2.14.671.3_1.40.00_Altel_0816_NV132_Ship”. I got everything back up and running on this ROM. I ended up having to enter the MSID and MDN etc... I then unlocked the phone using "titan_SPL_2.40-olipro" next having had success using Sprints 3.35 radio I flashed “RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship” that radio back onto my phone and then flashed dcd's 3.01 kitchen. I then tried out the GPS and everything was working great. Having finally received my 2 gig micro sd card I reformatted it to fat32 with 1024 clusters and proceeded to flash the 3.39 radio using this method instead of using the test sprint ROM as I did before. I decided to try out a different kitchen this time and I put on ppcgeeks "Titan_3.49_WM6" then installed “dcd QuickGPS.cab” and "dcd VisualGPSce.cab" and my GPS is working better than ever. For all of you out there that still are having GPS problems I would recommend doing something similar to what I did here. I would be interested to hear if this helps.
mr.ellsworth
Click to expand...
Click to collapse
I've tried your recommendation...however it did not make a difference
I don't know exact how you look at VisualGPSce.
On my "sig/nav" tab, there are a few vertical bars...all says 0...except two, which says 20 and 15.
Satellites in use: 0 (rarely 1)
Satellites in view: 0
Try resetting, or pull battery
After some experimentation, I now think that I can get out of the loop of not locking onto satalights buy resetting. Sometimes just turning off, other times a soft reset, and if that does not work, a shutdown plus remove battery seems to do the trick.
So, I downloaded the visual gps and I have good news and bad news. The good news is it is finding satellites so we know the GPS in my phone is working, the bad news is is isn't USING any of the damn satellites. When i'm inside my house it is only finding 1 but, when I go outside it is normally finding 3 with very strong signals and then picks up a few other ones that arn't very strong signals.
What do I do from here? We know the GPS is working, but it isn't locking. Maybe if I get it to lock somewhere other then my house and then come back it might work? I'm still under my 30 day free trial with Alltel and if I can't get this fixed I might return the phone. It is one of the main reasons I bought it and it's really pissing me off that it's not working right!!!
leepoffaith said:
What do I do from here? We know the GPS is working, but it isn't locking. Maybe if I get it to lock somewhere other then my house and then come back it might work? I'm still under my 30 day free trial with Alltel and if I can't get this fixed I might return the phone. It is one of the main reasons I bought it and it's really pissing me off that it's not working right!!!
Click to expand...
Click to collapse
Sounds like you've got a bad GPS chip. If the phone is otherwise working out for you, you should bring it back to Alltel for a swap-out due to defective hardware. Do it while you are in your 30 day period to minimize any hassles with them.
-Doc
I have to give DCD all the credit in the world. His work has been awesome and I really love that he is in this forum working hard all the time. However, I had many problems with 3.1.2 and radio 3.39. Slow GPS among a lot of other things. I am a sprint user and I did everything properly with flashing etc. My phone worked great except for the GPS which was extremely slow. I decided to revert back.
I put virtually all of the blame on radio 3.39. I think that it is still in development therefore it is not ready for release. Also I think that the carrier cabs that need to be installed with 3.1.2 are also an issue.
After reverting back to 3.0.4 and radio 3.35 I can say that things are dramatically improved. My GPS locks in seconds everytime. 3.39 took so long that it was useless. I do not have internet issue nor outlook issues with 3.35 either.
So... I suggest that anyone who is having problems with 3.39 go back to 3.35 radio and also back to dcd3.0.4
I highly suggest that you first install the official sprint 3.35 release and make sure you let the customizations run as well for carrier cabs. Then flash 3.0.4. After flashing do a hard reset to make sure all kinks are out. Stick with radio 3.35 and 3.0.4 if you are having issues with 3.39 and 3.1.2.
I hope any of this made sense. If you do not know what 3.39, 3.35, 3.0.4, or 3.1.2 means then dont touch a thing
I have to give DCD all the credit in the world. His work has been awesome and I really love that he is in this forum working hard all the time. However, I had many problems with 3.1.2 and radio 3.39. Slow GPS among a lot of other things. I am a sprint user and I did everything properly with flashing etc. My phone worked great except for the GPS which was extremely slow. I decided to revert back.
I put virtually all of the blame on radio 3.39. I think that it is still in development therefore it is not ready for release. Also I think that the carrier cabs that need to be installed with 3.1.2 are also an issue.
After reverting back to 3.0.4 and radio 3.35 I can say that things are dramatically improved. My GPS locks in seconds everytime. 3.39 took so long that it was useless. I do not have internet issue nor outlook issues with 3.35 either.
So... I suggest that anyone who is having problems with 3.39 go back to 3.35 radio and also back to dcd3.0.4
I highly suggest that you first install the official sprint 3.35 release and make sure you let the customizations run as well for carrier cabs. Then flash 3.0.4. After flashing do a hard reset to make sure all kinks are out. Stick with radio 3.35 and 3.0.4 if you are having issues with 3.39 and 3.1.2.
I hope any of this made sense. If you do not know what 3.39, 3.35, 3.0.4, or 3.1.2 means then dont touch a thing
Click to expand...
Click to collapse
Dude hold on a sec....before you go scaring everyone away from 3.1.2 and 3.39.10....did you say you were on Sprint and had extremely slow GPS?
Sprint users have NO excuse for not having instant locks with GPS. If you would have read the stickies at the top of this forum you would have found your answer for INSTANT GPS locks. It has nothing to do with what rom/radio you're using and EVERYTHING to do with what PRI version you have.
Personally, I have found absolutely nothing wrong with 3.1.2 and 3.39.10 and have used both for a while (no longer using 3.1.2 due to testing new builds, but STILL using 3.39.10).
A little reading of the important stuff goes a long way...
Not trying to scare anyone at all. I just saw that there were some posts about gps stuff and problems. I am in now way taking anything away from dcd or his kitchens/roms. DCD knows that I am a big fan of his and I have also tested his stuff. I am just trying to help those who are having issues, that is all.
Just the same way that we all have different programs that suit our needs, each of the current DCD Roms and other radio options offers some balance to some, and has drawbacks for others.
Some Roms have more beta feel, which gives some an edge and functionality that they can use. Some can't live with the buggy stuff (or figure out workarounds) so they keep what is familiar. This stuff is fun, lets keep it that way and let people brick their phone if they are talented enough to do it.
I went back to 304 myself because i couldn't get NoData working on 312. sounds like a chump reason but at 12$ a mb its a very important program to me. I kept radio 3.39 and have never had trouble with the GPS. Infact, when I compare the acquisition time of the titan to my Garmin Rhino and previous GPS units I'm still amazed at how fast all of the radio ROMs pick up GPS. Its totally comparable to a dedicated GPS unit. However, I'm on Telus.
All of the roms DCD has produced have been far better than stock, so this is in no way a complaint! Keep up the good work guys.
Ps. Is there a NoData like program that works on 3.12?
i've mentioned this before, but while 3.12 and radio 3.39 seem solid, i have experienced the same things. My GPS takes 5-7 minutes to lock, and when it does, it's normally 1/2-1 mile off. I didn't have these issues when i was with 3.04 and 3.37 (Alltel user here), but no complaints, the rest seems solid, so i've lived with GPS since i upgraded.
Like I said in the other thread...we've been working on a gps fix. Testing it now.
Yea I was going to test the GPS fix for 3.39 but I had to go back because I need the GPS too much.
gc14 said:
Like I said in the other thread...we've been working on a gps fix. Testing it now.
Click to expand...
Click to collapse
I guess people dont want to read you lol
Thanks for the info!
Yea I was going to test the GPS fix for 3.39 but I had to go back because I need the GPS too much.
Click to expand...
Click to collapse
Dude...you have Sprint!! You don't need to test that fix, you HAVE a fix that works. It's posted in the GPS sticky thread AND I made another thread dedicated to it....
My Sprint GPS is almost instant with DCD 3.1.2 and I didn't even have to read a sticky
My Sprint GPS is almost instant with DCD 3.1.2 and I didn't even have to read a sticky
Click to expand...
Click to collapse
What is your PRI Version in Device Information?
PRI Version: 2.03_003
PRI Version: 2.03_003
Click to expand...
Click to collapse
Ahh see...you have the updated PRI...
Now if all the Sprint users complaining about slow GPS would just read my post....
I've been on 3.04 and 3.35 radio for the whole time... I have no issues with anything. Phoen works great, reception is superb.
I'm sure DCD is cooking some crazy ****, and when he comes out with a major upgrade, but I dont see a need to reflash everytime there is a minor change made.
but I dont see a need to reflash everytime there is a minor change made.
Click to expand...
Click to collapse
You do read the changelog right? Did you not see the changes made in 3.1.2 from 3.0.4. I wouldn't say they're "minor"
gc14 said:
Ahh see...you have the updated PRI...
Now if all the Sprint users complaining about slow GPS would just read my post....
Click to expand...
Click to collapse
I'm running DCD 3.1.2 Radio 3.39.10 and PRI Ver. 2.00_003 and I get almost instant locks on GPS. I have no problems with GPS locking!!! Must be something in your machine.
I'm running DCD 3.1.2 Radio 3.39.10 and PRI Ver. 2.00_003 and I get almost instant locks on GPS. I have no problems with GPS locking!!! Must be something in your machine.
Click to expand...
Click to collapse
....... huh?
MR2 sees VZ Navigator and Google Maps if GPS Server is used. Flash PPCKitchen and GPS dies. Used all the tricks and tutorials including QPST and fix cab, nothing. Go back to MR2 and everything GPS works like above back to flash and nothing works after all the tricks again. When the QPST thing first came out I had a 6800 that worked great with a flashed ROM but wanted to use VZW Navigator so I went to MR1 and only VZW would work. Buttons stopped working and got replacement 6800 which I want to crush. Now miss my old ROM with all the things it could do and want to go back to Mobium and ditch VZW Navigator, but can't now. Is there a way out of this, or if not, a carrier and/or phone combo that just allows you to set it up to work the way you want it to? MR2 VZW does not seem to want to work with WifiRouter, making the re-flash the way to go.
cholle1 said:
MR2 sees VZ Navigator and Google Maps if GPS Server is used. Flash PPCKitchen and GPS dies. Used all the tricks and tutorials including QPST and fix cab, nothing. Go back to MR2 and everything GPS works like above back to flash and nothing works after all the tricks again. When the QPST thing first came out I had a 6800 that worked great with a flashed ROM but wanted to use VZW Navigator so I went to MR1 and only VZW would work. Buttons stopped working and got replacement 6800 which I want to crush. Now miss my old ROM with all the things it could do and want to go back to Mobium and ditch VZW Navigator, but can't now. Is there a way out of this, or if not, a carrier and/or phone combo that just allows you to set it up to work the way you want it to? MR2 VZW does not seem to want to work with WifiRouter, making the re-flash the way to go.
Click to expand...
Click to collapse
This has been covered 100 times.
Flashing a custom rom from mr1 or mr2 does not allow gps to work... you need to flash back to the verizon PRE GPS rom first. Then unlock, flash the latest radio and custom rom.
I'm sure the next question will be.. where do i get the pre gps rom?
http://x51.nx-1.com/index.php?dir=Phone-PDA/Titan/Stock-Rom/Verizon-2.09-1.30/
Thanks
Thanks so much as this was covered many times you were kind enough to help me out.
So I've got a Vibrant running Stock 2.1 with the JI6 OTA update. For some reason, like most others, the gps has never worked nor is it working now. I've done the quick fix for stock users by setting my phone to MS based, switched it to supl.google.com with 7276 for the port and can now see about 9-10 gps's at any given time, (and to add the compass works amazingly) the problem is that even though I see these satellites I never get an official lock. I've done gps test and even the performance test through *#3214789650# and I cannot get an official lock. I've since switched to and from these settings and the original settings with no change, and when it is set on the original settings I only see 1-4 satellites and never get a lock. Anyone have any suggestions or am I just boned till 2.2 froyo and pray that when that's officially released the gps will officially be fixed? Thanks if you can help ^_^
I recently installed the latest bionix ROM and the GPS was pretty much fixed. Locked on in seconds and was not as wonky as it was before.
I suggest you give it a try.
jonjacobmoon said:
I recently installed the latest bionix ROM and the GPS was pretty much fixed. Locked on in seconds and was not as wonky as it was before.
I suggest you give it a try.
Click to expand...
Click to collapse
There seems to be a minority, myself included, for which the JI6 hasn't improved GPS performance. I've tried falling back to JFD and upgrading to the stock JI6, as well as other ROMs, including Bionix 1.9.1. No joy.