Is anyone else getting an error message when closing RDP 6.1 using the task manager? If I open the program and close it without connecting I dont get the error, but I connect to my desktop then disconnect and close I get an error, which says wpctsc.exe.
Related
I do not know why but I cannot see the actual content of my XDA from Windows. The "Mobile Device" from the File Explorer is empty !
The XDA is on its craddle, and well connected, as ActiveSync 3.7.1 works fine. The XDA runs PPC2003 ROM A.30.09ENG
Any idea why ?
Bernard
didyou try to click on the 'explore' button on activesync?
Yes, I clicked on "Explore" in the ActiveSync:
it brings the "Mobile Device" window in the File Explorer, but still empty
Bernard
I solved the problem
by reinstalling ActiveSync 3.7.1
I really do not know what caused that. But at least, the sync was always working.
Bernard
You can also solve ActiveSYnc problems of this nature by closing all open file explorer windows sometimes. It's a caching problem of some sort.
After upgrading my Qtek 2020 to WM5 I got the message:
Found new hardware Windows Moile-based device.
I have installed ActiveSync 4.0, but no difference.
So by not finding the new hardware Activesync doesn't work.
Anyone know how to solf this problem?
You could read the forum and the info on http://www.buzzdev.net... then you would know the known problems of activesync 4... for instance you need service pack 2 installed
SP2 is installed, Activesync on other PC works, but when I try to install for example TomTom5 or TomTom3 it gives an error:
TomTom Setup Application has encountered a problem and needs to close.
Every install I make I get this error. Exploring the PDA with Activesync works fine.
i let my almost-future son-in-law take home and play with my g4 wizard love wm6 cingular branded wizard.
he mailed it back to me and now it won't connect to activesync 4.5.
if i uncheck advanced settings on the usb settings page, the computer gives me the usb balloons that says it is connected to the computer.
activesync doesn't even want to look for the pda.
if i check the box, activesync tries to find the pda but fails.
also, the computer doesn't seem to connect to the computer since there are no usb balloons.
is there anything i can try short of reinstalling wizard love.
thanks
Plug it into the usb wire, turn it on and then do a hard reset do not unplug it till active sync pops up on your computer.
irv6744 said:
i let my almost-future son-in-law take home and play with my g4 wizard love wm6 cingular branded wizard.
he mailed it back to me and now it won't connect to activesync 4.5.
if i uncheck advanced settings on the usb settings page, the computer gives me the usb balloons that says it is connected to the computer.
activesync doesn't even want to look for the pda.
if i check the box, activesync tries to find the pda but fails.
also, the computer doesn't seem to connect to the computer since there are no usb balloons.
is there anything i can try short of reinstalling wizard love.
thanks
Click to expand...
Click to collapse
You havent mentioned what OS you have on your pc. If you have XP SP2 you can sometimes jumpstart activesync 4.5 by restarting the DHCP.
Start -> Control Panel -> Administrative Tools (only visible in classic view of control panel) -> Services -> DHCP client -> Restart
peter petrelli said:
You havent mentioned what OS you have on your pc. If you have XP SP2 you can sometimes jumpstart activesync 4.5 by restarting the DHCP.
Start -> Control Panel -> Administrative Tools (only visible in classic view of control panel) -> Services -> DHCP client -> Restart
Click to expand...
Click to collapse
i've got the same problem olso with xp sp2 and i tried it on vista .
after the update to wm6 its ****ty both solution didn't work for me.
I hope some one get a solution
thanxxx
Same problem with me too..
all the sudden the activesync service in WM6 doesnt start at all..
ActiveSync on PC warns me there is a problem with the connection..
Is there anybody out there that knows how to get the ActiveSync service back and running again.? I tried the the taskmanager to look for the service itself. But found out that the activeSync service is nowhere to be found between the other services. 16 other services are found.
I tired it on Vista (Mobile 6.1) and Windows XP SP2 (Activesync 4.5)
It does not help when i start the program ActciveSync (application) in WM6.
dCY said:
Same problem with me too..
all the sudden the activesync service in WM6 doesnt start at all..
ActiveSync on PC warns me there is a problem with the connection..
Is there anybody out there that knows how to get the ActiveSync service back and running again.? I tried the the taskmanager to look for the service itself. But found out that the activeSync service is nowhere to be found between the other services. 16 other services are found.
I tired it on Vista (Mobile 6.1) and Windows XP SP2 (Activesync 4.5)
It does not help when i start the program ActciveSync (application) in WM6.
Click to expand...
Click to collapse
I had the same problem one time after flashing to WM6. How I got it to work was to delete the old mobile device from my active sync, then connect the usb cable.
i've tried all the hints here but so far no connectivity to activesync.
did anyone get the pda seen by winxpsp2 any other way that worked.
i can get into boot loader but still no connection ro activesync.
thanks
Hi
in the begining , sorry for my poor langague
first point u should have active synchronize virgin 4.5 not earlier
second point delete the old connection from the programe.then make a new connection between ur device & pc. it will work properly (in shaa allah)
try it & let me know
zizo
shalom
i uninstalled activesync and then rebooted, downloaded a new copy and reinstalled it.
the computer sees the pda through the rndis driver and says it's installed.
at the end of the install i got some kind of message about outlook not being the default email reader but i ignored it.
then i ran the basic outlook setup but did not make outlook the default mail client.
but active sync still refuses to connect to the computer to the pda.
any other thoughts.
later tonight or during the week i will try it on another xp computer and then a vista computer to see if one of them works.
Hey lissen folks.... any luck on finding the solution.... were u guys able to run the AS4.5 after removing the device? If yes, how do you remove the devioce?
I know its a problem with PC because i tried it on other PC with Win2000 and it worked fine. ANything to do with firewall perhaps?
hi im developing an app with eclipse and ADT, my app woks fine in the emulator, just connect via REST (post) to a localserver and execute some service.
the problem apears when I want to execute my app in my cellphone, basically it can't connect to the server, when I put the server IP etc etc...a timeout error is all I get...
android has any problem with the dns or something like that? I can't find the problem
Hi,
I've been trying to get adb working on a Mac (OS 10.6.8), talking to a Galaxy Note II. The thing is, that USB communication seems all messed up. Between KIES and AFT and the MacOS drivers I keep running into the following:
- connect device via USB
- up pops a disk icon and finder window (showing Verizon's Windows tools); then the WIndow closes, and
- up pops AFT error - can't connect; I close that,
- up pops MacOS's network preferences window asking if I want to configure a USB modem; I close that;
- adb devices list the device properly, lets me do things like start a shell
BUT....
- if I start something long running (like a backup), AFT again tries to pop open a finder followed by an error, network preferences again tries to configure a modem, and in the process, they kill the adb connection
Perhaps somebody can explain a bit about the ins and outs of USB-Android connectivity, on a Mac, specifically with the Samsung strangeness? And maybe suggest a way to suppress all the unwanted behaviors?
Thanks very much,
Miles Fidelman