Help ROM Just Stopped Working - Touch Pro, Fuze ROM Development

Ok please go easy on me, I have been trying to look for an answer and can't come up with anything
I followed all the instruction here on how to set up a new ROM, installed NATF and everything was working fine
I just did a reset on the phone, but keep getting the following message
Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service centre
And it won't connect with Vista Mobile Manager anymore
I went into boot mode and tried to reflash the rom as per the instructions here, but after it hits 100% on the load status bar I just get the same message
Any tips would be greatly appreciated!

I've tried different ROMs, redoing HardSPL and I keep getting that message
Pretty sure I'm screwed

and your phone is raphel?and use things for raphel?
Maybe you write what exactly you do.
And tried flash by SD card.

Sorry
Yes it is a Rapael, and I following the instructions in the Noobs thread in this forum. The ROM I updated was a Rapael ROM

If you have NATF's rom on your phone you need to post in NATF's ROM thread. You will get faster help specific to the rom and we will have less threads to dig through when we need to find something .

aruppenthal said:
If you have NATF's rom on your phone you need to post in NATF's ROM thread. You will get faster help specific to the rom and we will have less threads to dig through when we need to find something .
Click to expand...
Click to collapse
Sorry about that, I'll try that thread
I wasn't sure if it was ROM sprecific because I tried other ROMs and have the same problem

try going into bootloader and reloading official rom?

venelar said:
try going into bootloader and reloading official rom?
Click to expand...
Click to collapse
Just doing that right now actually
edit: ok looks like it worked, I'm up on the stock at&t ROM now, that is really weird that the NATF ROM just went down like that

Not as weird as you not reading or searching and starting your own thread instead of posting it in the appropriate ROM thread. To just figure the issue out yourself. Mods close this thread please.
-McMex
@ aruppenthal thank you.

mcmexican said:
Not as weird as you not reading or searching and starting your own thread instead of posting it in the appropriate ROM thread. To just figure the issue out yourself. Mods close this thread please.
-McMex
@ aruppenthal thank you.
Click to expand...
Click to collapse
It's a crazy world little buddy

Related

Ohh Heavenly XDA Fascinate forums please guide my rooting and CWM install!

Hello....
So i found a guy on craigslist to trade my Droid 2 for the Fasicnate, drove thirfty miles to his house and listend to him freak out for 35 mins as i explained the benifits of my droid 2 and it being rooted and he seriously begain hyperventelating because he was dead straight afraid of being arrested........ I was about to just.... i dont know, the word run came to mind... Anyway.
WHat a beautiful phone, i mean it you guys have got something here, and im glad i added this to my growing list of android device's this is my fifth since my first love The G1.
Anyways,
I presumed and though i could install Cyanogenmod on it that was the immediant reason i got it, i didnt do any reaseachr and now know that u can but it runs really ruff and isnt supported... so.
I modded via this cyanogen wiki
http://wiki.cyanogenmod.com/index.php?title=Samsung_Fascinate:_Rooting
i got all the way to the part about installing rom manager and flashing CWM,
However i went to do this (yes im rooted) and all i get is when i flash cwm and i try to reboot into cwm from rom manager to make a backup is i get to the samsung 2e recovery screen ..
A little more research i see something that i need to install or excuse me i need a program called odin, and i need the cwm packaged via this thread but the CWM package is no longer hosted...
http://forum.xda-developers.com/showthread.php?t=788099
But, one im not completly sure that is what i need to do and two im seein what i think is a bunch of diff versions of baseband like D101 ect However i see on mine that the last of my baseband is Dh12 actually its all s:i500.04 v.dh12
SHould i be downgrading here? And its best to assume while i have rooted and taken the virginity of the G1, Eris, Droid, Droid 2 Droid X and now this beyond what i have described here is my limited experience with this phone.
Also bear in mind that this phone was factory reset when i got it, and was 100% virgin. It is now rooted but that is it. I really wanted to get back to "my roots" like my G1 and have a fully modable phone from kernal on up and was stoked to get this. But im lost and i cant seem to find much help else where, or what appears to be people telling me to reroot and i know that is incorrect.
Can you all point me in the right direction please!
My sincere apprecation and thanks for your help and acceptace of my sporatic typeing.
Don't have a chance to read this atm but before you get flamed..you should post this in the general or Q and A section instead..
[xda premium]
SCH-I500 - EC10-EC01/Nemesis 1.3ghz OTB-Reloaded/Voodoo/Crysis Revolution/Zeam Launcher
Samsung Drivers: http://forum.xda-developers.com/showthread.php?t=779238
Odin: http://www.mediafire.com/?ufyp2mx2fiaskkc
Older recovery CWM2.5 (migrating to 3 slowly): http://forum.xda-developers.com/showthread.php?t=942021
New recovery CWM3: http://forum.xda-developers.com/showthread.php?t=1046905
List of Roms and Kernels: http://forum.xda-developers.com/showthread.php?t=1013312
List of Themes: http://forum.xda-developers.com/showthread.php?t=922455
Search the forum for a guide. They exist. Cyanogen mod 6 is running fine lacking only a couple medium features. 7 is in alpha. Prepare to get flamed for posting in the wrong section.
Sent from my SCH-I500 using XDA App
Instructions.
First, welcome to the Fascinate forums. Second, please try to faimilariaze yourself with the rules here. This thread should have gone in Q&A and you are quite likely to get flamed for it eventually.
As for your questoin-- We don't have a fully functioning AOSP, CM6, or 7 yet but what we have is pretty close. If you can live without MMS, Camcorder, and BT headset then you should give one them a shot. If not, stick with one of the Touchwiz builds such as Nitro's Evil Fascination or Adrylnalyn's Superclean.
Nitro has linked you to all the necessary software. As for using Odin, please reference this thread.
nitroglycerine33 said:
Samsung Drivers: http://forum.xda-developers.com/showthread.php?t=779238
Odin: http://www.mediafire.com/?ufyp2mx2fiaskkc
Older recovery CWM2.5 (migrating to 3 slowly): http://forum.xda-developers.com/showthread.php?t=942021
New recovery CWM3: http://forum.xda-developers.com/showthread.php?t=1046905
List of Roms and Kernels: http://forum.xda-developers.com/showthread.php?t=1013312
List of Themes: http://forum.xda-developers.com/showthread.php?t=922455
Click to expand...
Click to collapse
Nitro always looking out! One of our most valuable members I might add.
I would strongly reccommebd flashing Nitro's Evil Fascination Froyo rom and perhaps one of his themes once you get that far. You won't regret it. Trust me. Super sexy and super fast and he's very friendly and knowledgable. Keeps all his work updated on a regular basis too. Good luck and congrats on your new Fascinate!
Sent from my SCH-I500 using XDA App
Got all the links you could ever ask for from nitro. Just install Odin on your comp and install the Samsung drivers. Then just go to the link for the older cwm and d/l the necessary file.
Remove battery from the phone and while you're holding the volume down.button plug the phone into.your.computer. it'll show a yellow android and say downloading.
Click PDA and choose the file you downloaded for cwm 2.5 and click start. Once it.says pass on Odin you're done.
Even easier, get one of the packagaes from one of these threads it includes adryns froyo rom, the modem for.froyo and the recovery. I don't feel like finding the link but if you get that it's easy its just one big file that you flash with Odin (the same.way you do with cwm) and when its done you got a froyo fascinate with a solid touchwiz rom from adryn
Sent from my SCH-I500 using XDA App
Nitro thank you for all the links that saved me a lot of searching. And everyone else ty for your help.
As for the flaming i could care less it shows lack of maturity and what someone wants to bash me for is simply a waste of time. I dont care what some moron in his moms basement who is jumping from tab to tab from porn, to there wow or pokemon fetish and XDA. One would hope because of the intregrity here they would get banned.. Anywho.
And lastly the reason for posting here is because i didnt figure that the forum mentioned was classified for my question because it has nothing to do with "general" and everything to do with "development".. So, my apoligies if i was wrong and ill attempt to look a little better next time.
Thank you.
Mortland said:
Nitro thank you for all the links that saved me a lot of searching. And everyone else ty for your help.
As for the flaming i could care less it shows lack of maturity and what someone wants to bash me for is simply a waste of time. I dont care what some moron in his moms basement who is jumping from tab to tab from porn, to there wow or pokemon fetish and XDA. One would hope because of the intregrity here they would get banned.. Anywho.
And lastly the reason for posting here is because i didnt figure that the forum mentioned was classified for my question because it has nothing to do with "general" and everything to do with "development".. So, my apoligies if i was wrong and ill attempt to look a little better next time.
Thank you.
Click to expand...
Click to collapse
Hey Mortland,
Welcome to these forums. I am still fairly new here at XDA. Just to clarify and help you understand what everyone was referring to. I believe if I read them correctly, the rules about the Development section say posts and especially new threads in the development section should be limited to things that are directly related to development of a ROM, kernel, or MOD. This is so the development forum is used for improvements to existing ROMs, kernels, or MODS, or development of new ROMS, kernels, or MODS so the developers doing this work do not have to wade through a laundry list of threads or non-development questions in order to get the information they need. So if you have questions about development, or want to report a bug or problem you have discovered with a ROM, kernel, or MOD, then you come here and post. If it is a question on how to install or use a ROM, kernel, or MOD, then I guess it is supposed to go over in the Q&A section. I know it can seem kind of confusing, so the only reason for me posting is to hopefully help clear up any of the confusion. Hope this has helped, and definitely follow nitrogliceryne's advice and help. Good luck.
Mods and devs,
Sorry if this long post has cluttered things up even more. Just trying to help.
landshark68 said:
Hey Mortland,
Welcome to these forums. I am still fairly new here at XDA. Just to clarify and help you understand what everyone was referring to. I believe if I read them correctly, the rules about the Development section say posts and especially new threads in the development section should be limited to things that are directly related to development of a ROM, kernel, or MOD. This is so the development forum is used for improvements to existing ROMs, kernels, or MODS, or development of new ROMS, kernels, or MODS so the developers doing this work do not have to wade through a laundry list of threads or non-development questions in order to get the information they need. So if you have questions about development, or want to report a bug or problem you have discovered with a ROM, kernel, or MOD, then you come here and post. If it is a question on how to install or use a ROM, kernel, or MOD, then I guess it is supposed to go over in the Q&A section. I know it can seem kind of confusing, so the only reason for me posting is to hopefully help clear up any of the confusion. Hope this has helped, and definitely follow nitrogliceryne's advice and help. Good luck.
Click to expand...
Click to collapse
+1
Mods and devs,
Sorry if this long post has cluttered things up even more. Just trying to help.
Click to expand...
Click to collapse
It's very helpful to Mortland and very much bear repeating within the thread as the OP was not able to comprehend these thing from the forum the stickies.
beray5 said:
+1
It's very helpful to Mortland and very much bear repeating within the thread as the OP was not able to comprehend these thing from the forum the stickies.
Click to expand...
Click to collapse
Thanks beray5
landshark68 said:
Thanks beray5
Click to expand...
Click to collapse
Thx, for your Concern like always Shark.
But can you stop brining this thread Very Top :]
From now on, just no one answer it. So it gets buried away or Mod erases it.
xHoLyx said:
Thx, for your Concern like always Shark.
But can you stop brining this thread Very Top :]
From now on, just no one answer it. So it gets buried away or Mod erases it.
Click to expand...
Click to collapse
Can't we just request that MOD move it to the Q&A section? Especially since some good links were posted there? No sense being a wanker about it, except that it can be fun if you woke up on the wrong side of the bed this morning.
I know it makes all the "experienced" users feel good to bash every new guy that posts in the Development Thread but something really should have occurred to the community at large by now:
If this is happening something like 15 times per day, maybe the thread title should be renamed to Developers ONLY or Not for Q&A (or something like that)...although I'm kind of guessing that it's an auto-naming thing that they have set up for each new device that gets listed on the forums, so that might not be an option.
Usually I'm not very into getting threads moved when they're placed where they are but this thread is just straight ridiculous. Hyperventilating, seriously?
We need to have some sort of HTML implemented that allows any user to click the button and flag the thread for being moved. Not flagged for being inappropriate or reporting, just flagged for need of being moved to another section.
Black screen with Galaxy SCH-i500
nitroglycerine33 said:
Samsung Drivers: http://forum.xda-developers.com/showthread.php?t=779238
Odin: http://www.mediafire.com/?ufyp2mx2fiaskkc
Older recovery CWM2.5 (migrating to 3 slowly): http://forum.xda-developers.com/showthread.php?t=942021
New recovery CWM3: http://forum.xda-developers.com/showthread.php?t=1046905
List of Roms and Kernels: http://forum.xda-developers.com/showthread.php?t=1013312
List of Themes: http://forum.xda-developers.com/showthread.php?t=922455
Click to expand...
Click to collapse
Was trying to reimage this phone using Odin v1.3 a usb malfunction error message came up Ive been trying to use it to several computers since then, but the same message kept coming up and of course the odin could recognise the devise and i went up turn the phone on normally all i have is a black screen with a phone and yellow explanation and computer logos on the screen the explanation sign is in between the phone and computer logos and now I can not do anything with this phone...I think my only option is for somebody to help me to find some image that will run on the SD card instead of the USB port.
Please help!
Thank you!
jrg1319 said:
Was trying to reimage this phone using Odin v1.3 a usb malfunction error message came up Ive been trying to use it to several computers since then, but the same message kept coming up and of course the odin could recognise the devise and i went up turn the phone on normally all i have is a black screen with a phone and yellow explanation and computer logos on the screen the explanation sign is in between the phone and computer logos and now I can not do anything with this phone...I think my only option is for somebody to help me to find some image that will run on the SD card instead of the USB port.
Please help!
Thank you!
Click to expand...
Click to collapse
Hey there guy,,, sure looks like you have been doing some reading and searching ,, just maybe not the most up to date information...
You need to look in this [Guide]
http://forum.xda-developers.com/showthread.php?p=17050028
It has The answers, info and links I believe you need to get to over the hump...
Sometimes it may help to print those instructions and cross off steps as you do them,, to make sure you don't accidentally overlook anything
Good luck
Sent from my SCH-I500 using xda premium

I have rooted my SGS2. What to do next?

Hi all,
I have rooted my device according to the following method:
http://forum.xda-developers.com/showthread.php?t=1319653
My phone specs are as follows: Stock Rom.
PDA:KJ2/ PHONE:KI4/ CSC:KJ1 (XSG)
Now that I have rooted my device, I would like some help what to do next for optimum performance and to remove the bloatware? I am very new to android world. Any help will be highly appreciated. Thanks in advance.
trawl the rom threads see what you like the look of, im not saying this just becausei use it, but take a look at the litenin rom thread in my sig, thats simple to flash and plenty of instructions, i have found most roms are are based on nothing much being changed unless you go for miui or a cm7 rom,
if you wanna remove bloatware i personally set my phone up n use system app remover, everyone has there own personal choice for roms so its basically take a look at the thread if u like the look of it give it a shot,
there is plenty of help and advice in the stickys and the rom threads if you get stuck.
Demon_man said:
trawl the rom threads see what you like the look of, im not saying this just becausei use it, but take a look at the litenin rom thread in my sig, thats simple to flash and plenty of instructions, i have found most roms are are based on nothing much being changed unless you go for miui or a cm7 rom,
if you wanna remove bloatware i personally set my phone up n use system app remover, everyone has there own personal choice for roms so its basically take a look at the thread if u like the look of it give it a shot,
there is plenty of help and advice in the stickys and the rom threads if you get stuck.
Click to expand...
Click to collapse
Thanks a lot Demon_man for the reply. I have noted few things in lightening ROM which need clarification.
1) It is based on 2.3.4 while mine is 2.3.5...should I go back?
2) It doesn't support Right to left languages..They say to install older versions.
3) what is the battery life with lightening ROM?
I shall be thankful for further help.
sorry thought i had updated my sig litnin is now un supported as far as im aware the dev left but this thread has taken over the litnin rom,
http://forum.xda-developers.com/showthread.php?t=1334124
RtoL languages i wouldnt no sorry not without asking or going through the whole details.
battery life is excellent simple as
and the link i just gave like i said is the litning rom updated
mirchichamu said:
Thanks a lot Demon_man for the reply. I have noted few things in lightening ROM which need clarification.
1) It is based on 2.3.4 while mine is 2.3.5...should I go back?
2) It doesn't support Right to left languages..They say to install older versions.
3) what is the battery life with lightening ROM?
I shall be thankful for further help.
Click to expand...
Click to collapse
check my sig and click on were it says custom rom Androidmeda...they support RTL and the devs there are always about to help you out...I have been on the rom since it has came out and i have nothing but good words to say about it my friend...Any help just let me know
Titanium backup . Speedmod kernel .
Sent from my HTC Desire S using xda premium

USB Connect to Computer?

Im running ROM Unicornporn (dont ask) and cant connect via usb. Id post on the forum itself, but im a new user and dont have enough posts... So is anybody running it and know how to? Or is anyone willing to ask them, instead of me, since i cant post?
btw, the link the the page is here: http://forum.xda-developers.com/showthread.php?p=24626122#post24626122
thanks
I'm not new to rooting but I am new to the website. Couple of questions before I can really help. First the ROM you flashed is a cdma rom but is your phone cdma or GSM? Next question, what hboot are you on? Finally have you downloaded the adb and fastboot drivers to your PC? I'll see if I can help you out if you can get back to me
Did you fully wipe before flashing?
Also, it seems that rom is pretty much in the Alpha stage, meaning things won't work, which is normal.
Ok I think I found a solution to your problem. Go to the main post for your ROM on xda. There is a link near the top that says Check out the comprehensive FAQ by brainfire. Click that link and it will take you to a FAQs website for you ROM. It talks about your USB problem on there. Sorry I can't provide a link. I haven't posted enough yet but I would give it if I could. Hope this helps a bit.
sitlet said:
Did you fully wipe before flashing?
Also, it seems that rom is pretty much in the Alpha stage, meaning things won't work, which is normal.
Click to expand...
Click to collapse
this.
.................................
fourthhorseman said:
Ok I think I found a solution to your problem. Go to the main post for your ROM on xda. There is a link near the top that says Check out the comprehensive FAQ by brainfire. Click that link and it will take you to a FAQs website for you ROM. It talks about your USB problem on there. Sorry I can't provide a link. I haven't posted enough yet but I would give it if I could. Hope this helps a bit.
Click to expand...
Click to collapse
This...........check out the FAQ, your issue is posted on the TOP and try the solution posted there.

Htc Titan stock Rom

Hi folks! I just wanted to know if there is a way to flash my stock rom to the device. I am running the Dynamic custom rom by ultrashot and mye phone crashes etc., therefore I want to flash my phone back to the original firmware, radio and so.
Can somebody help me? Make a guide?
Hope for a positive answer
Cheers,
Tabbii
http://forum.xda-developers.com/showthread.php?t=1334468
Lots of useful stuff on ere if you look for it.
" Today 06:36 PM
AndyFZ1S http://forum.xda-developers.com/show....php?t=1334468
Lots of useful stuff on ere if you look for it. "
I know mate =) It is just that I don't understand a thing. I have been searching and searching for ages, but I can't seem to find a guide/way. Tried out many different things. It would be alot easier if somebody who knew about flashing stock rom would post a thread/guide =)
Cheers,
Tabbii
Its very simple - download original ROM, connect phone to PC and flash it, i dont understand whats the problem on it...
Maybe you should tell us a bit more about ur phone- att vs euro version, if its att did u debrand to euro version or flashed to dft spl2.05 straight away, what methods have u tried that didn't work?
Sent from my Titan Dynamic7 v1.21 using XDA Windows Phone 7 App
Petulinek said:
Its very simple - download original ROM, connect phone to PC and flash it, i dont understand whats the problem on it...
Click to expand...
Click to collapse
Okay bud, let's say that you make a guide for me. Find the original stock rom for me, tell me how to flash and problem resolved. You in?
Tabbii said:
Okay bud, let's say that you make a guide for me. Find the original stock rom for me, tell me how to flash and problem resolved. You in?
Click to expand...
Click to collapse
Good joke man
Everything you need is in this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Pls next time use Search before posting.
but what does "RUU" stand for?
Not that easy...
Petulinek said:
Good joke man
Everything you need is in this thread: http://forum.xda-developers.com/showthread.php?t=1334468
Pls next time use Search before posting.
Click to expand...
Click to collapse
Believe me, buddy, I searched alot before posting this. I just can't seem to find a way to install the stock OSPL back again. Now I am running HSPL by DFT. I want to install the old OSPL again so that I can have the stock rom(original). I have searched everywhere, but there is no post regarding the stock OSPL. Yes, the program for installing HSPL by DFT has this choice where u can choose downloading the HSPL or the OSPL. I have tried many times to install the OSPL, but I get an error. Besides, I don't know the right structure of this whole process; Am I going to install the stock radio first or install the OSPL first? And what about the Stock Rom, when do I flash That?
RUU stands for RomUpdateUtility =)
hello bud,
pay no attention to the "know it alls" who post just to post, without actually answering your question. Thats what the forums are for, developement and questions no?
But as an attempt to be helpful, what type of device do you have?
Have you tried just flashing the stock rom found on Football's rom thread?
If not try that using a "RUU" because from what DFT's HSPL page says you should overwrite their hspl if you reflash the original Rom for your device.
IronMan1289 said:
hello bud,
pay no attention to the "know it alls" who post just to post, without actually answering your question. Thats what the forums are for, developement and questions no?
But as an attempt to be helpful, what type of device do you have?
Have you tried just flashing the stock rom found on Football's rom thread?
If not try that using a "RUU" because from what DFT's HSPL page says you should overwrite their hspl if you reflash the original Rom for your device.
Click to expand...
Click to collapse
I have an HTC TITAN(EURO VERSION I THINK). I do have installed ultrashot's rom(dynamic's.......) i don't know what to flash first. What AM I flashing first?
where do i get that RUU? and what AM i overwriting with? I AM getting so confused :-\
You just look in the development thread and download any RUU, like ansar's for example. Then download the stock "euro" rom from football's filefactory. Then you simply put the rom In the same folder as the ruu, run it and follo the instructions! Good luck.
Iron Man
Sent from my PI39100 using XDA Windows Phone 7 App
IronMan1289 said:
You just look in the development thread and download any RUU, like ansar's for example. Then download the stock "euro" rom from football's filefactory. Then you simply put the rom In the same folder as the ruu, run it and follo the instructions! Good luck.
Iron Man
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
could anyone give a tutorial for this¿?
doubler.es said:
could anyone give a tutorial for this¿?
Click to expand...
Click to collapse
What exactly are you trying to do?

How do I install Render's 6.0.4.5 Recovery/Kernel?

I've tried flashing it through rom manager, and it reboots into recovery and installs it, however the version in recovery and in rom manager is still 6.0.1.0.
I'm not sure what I'm doing wrong here.
countercharge said:
I'm not sure what I'm doing wrong here.
Click to expand...
Click to collapse
Stop using rom manager! There's a very old sticky on this very subject a few posts above this one!
If you follow the install instructions in the OP of Render's thread, you'll be able to install the new recovery without issues. Read through the multiple pages if you seek other questions; that thread is heavily interactive and helpful, so it wouldn't be a bad idea for you to read through a few pages before you proceed.
But please stop using rom manager on the i777.
sent from the i777
countercharge said:
I've tried flashing it through rom manager, and it reboots into recovery and installs it, however the version in recovery and in rom manager is still 6.0.1.0.
I'm not sure what I'm doing wrong here.
Click to expand...
Click to collapse
Well, you used ROM Manager, which has a sticky about it in this subforums. You need to install the Cyanogenmod 10.2 Nightly to get version 6.0.4.5 ( http://download.cyanogenmod.com/?device=i777 ), then flash his ROM and Kernel.
azeem40 said:
Well, you used ROM Manager, which has a sticky about it in this subforums. You need to install the Cyanogenmod 10.2 Nightly to get version 6.0.4.5 ( http://download.cyanogenmod.com/?device=i777 ), then flash his ROM and Kernel.
Click to expand...
Click to collapse
Ok, thank you for pointing me in the right direction, but I have a new question. How do I install a custom rom (in this case cyanogen 10.2) without a custom recovery installed? It seems like a chicken and the egg situation to me. I need to install a custom rom to get a custom recovery, but I have no custom recovery installed to install the custom rom.. to get the custom recovery. I do have the android sdk installed and mobile odin pro, but I haven't found any stickied threads that show how to use them to do this. I'd appreciate it if you or anyone else could explain a bit more thoroughly or link me to the proper threads. I've tried searching but haven't found any clear answers.
I also think the AOKP ROM is more appropriate for me than Cyanogen, but I still face the same problem in that I don't know *how* to install it without a custom recovery, which I can't get without installing a custom rom..
Edit: I found this link: http://wiki.cyanogenmod.org/w/Install_CM_for_i777
I will try to follow these instructions.
countercharge said:
I found this link: http://wiki.cyanogenmod.org/w/Install_CM_for_i777I will try to follow these instructions.
Click to expand...
Click to collapse
Why you refuse to search in these forms for the CORRECT way of getting exactly what you want is very unfortunate. If you read the OP of the CM thread, instead following external advice, you'll be in a much better situation.
countercharge said:
Edit: I found this link: http://wiki.cyanogenmod.org/w/Install_CM_for_i777
I will try to follow these instructions.
Click to expand...
Click to collapse
Please let us know if you got this to work for you. I'm not sure what this installs on your phone, but on the SGH–I777, recovery is compiled into the kernel. Normally you would install a custom kernel that is compatible with your operating system. You can use mobile open Pro to do that. If you haven't got this done yet, let us know. We can help.
SteveMurphy said:
Why you refuse to search in these forms for the CORRECT way of getting exactly what you want is very unfortunate. If you read the OP of the CM thread, instead following external advice, you'll be in a much better situation.
Click to expand...
Click to collapse
I *did* search, nothing relevant comes up. Why don't you, instead of telling me that I'm searching wrong, tell me what I should've been searching for. Maybe, before you go and tell someone they're not searching correctly and tell them to read a thread, you could go and actually read that thread yourself. The very first part of the instructions say this:
Make sure you are on CWM 6.0.4.4+ before flashing ROM! Thanks to @mr-cook you can now download and flash just the recovery/kernel!
Click to expand...
Click to collapse
That is what I am trying to figure out how to do, and the instructions in the "external advice" that I found in this case is the correct thing to do to get CWM. I found that by searching. If you want to send me on a wild goose chase instead of actually telling me or linking me to relevant threads, go ahead, but don't act like you're actually being helpful. *Nothing* in the CM thread shows me how to first install CWM. Not a damn thing.
Edit: I managed to get CWM installed by flashing the AJK 4.9 noswap kernel using mobile odin pro. I thought I messed it up because it was taking a long time for the boot animation to finish, but it worked.
Edit: except now my home and search keys don't work..
countercharge said:
I *did* search, nothing relevant comes up. Why don't you, instead of telling me that I'm searching wrong, tell me what I should've been searching for. Maybe, before you go and tell someone they're not searching correctly and tell them to read a thread, you could go and actually read that thread yourself. The very first part of the instructions say this:
That is what I am trying to figure out how to do, and the instructions in the "external advice" that I found in this case is the correct thing to do to get CWM. I found that by searching. If you want to send me on a wild goose chase instead of actually telling me or linking me to relevant threads, go ahead, but don't act like you're actually being helpful. *Nothing* in the CM thread shows me how to first install CWM. Not a damn thing.
Edit: I managed to get CWM installed by flashing the AJK 4.9 noswap kernel using mobile odin pro. I thought I messed it up because it was taking a long time for the boot animation to finish, but it worked.
Edit: except now my home and search keys don't work..
Click to expand...
Click to collapse
Now flash the 6.0.4.5 kernel I linked to.
azeem40 said:
Now flash the 6.0.4.5 kernel I linked to.
Click to expand...
Click to collapse
Well, after I last edited that post I installed the rom from this thread: http://forum.xda-developers.com/showthread.php?t=1574718
and everything is working fine now. I love it. I'm going to keep the kernel that is installed with it for now since I feel no need to use cyanogenmod just yet. This suits my purposes fine. I appreciate the help and advice.
countercharge said:
Well, after I last edited that post I installed the rom from this thread: http://forum.xda-developers.com/showthread.php?t=1574718
and everything is working fine now. I love it. I'm going to keep the kernel that is installed with it for now since I feel no need to use cyanogenmod just yet. This suits my purposes fine. I appreciate the help and advice.
Click to expand...
Click to collapse
You are welcome.

Categories

Resources