Ringer delay for Sprint? - Touch Pro CDMA

i saw a post about ringer delay for AT&T user and they just need to disable the dialer and the problem solve but what about us sprint users? Here is the original post about that http://forum.xda-developers.com/showthread.php?t=449417
i tried to disable the dialer on registry but still get 2-3 second delay before my Touch Pro actually ring.

Download and install DiamondTweaks. There is an option to disable the ringer delay. Works well.

convert your ringer to .wav file

temperamentalman said:
Download and install DiamondTweaks. There is an option to disable the ringer delay. Works well.
Click to expand...
Click to collapse
The ringer delay that this changes is the pause between when the ringtone ends and it repeats. Not the delay from when the LED starts flashing (because a call arrived) till the phone actually starts ringing.
If you wish to turn off the HTC dialer and use the WM Dialer, simply goto the following registry entry,
[HKEY_LOCAL_MACHINE/Security/Phone/Skin]
"Enabled" = dword:1​change the Enabled value from 1 to 0 which will disable the HTC dialer.
I vote for converting to WAV files as well.
If you would like to complain to Sprint about it, the following is the thread I started on Sprint's forum regarding this very subject.
http://forums.buzzaboutwireless.com/baw/board/message?board.id=SmartPhones&thread.id=5304

Thanks smotrs...
Know anyway to get the light sensor to turn off the screen when on a call (Sprint) other than S2U2?

temperamentalman said:
Thanks smotrs...
Know anyway to get the light sensor to turn off the screen when on a call (Sprint) other than S2U2?
Click to expand...
Click to collapse
Depends on what you may have done (adding programs, etc..) to your phone. By default, our devices will turn the screen off to conserve battery while a call is in session. However, if you have added one of the S2A dialer GSM versions which was taken from the Touch HD, that feature was disabled because of the InCall curtain. The CDMA versions (my signature and others) were taken from the Sprint Diamond ROM that was released and still contains the necessary code to turn off the screen display while the call is in progress.

Smotrs...just HR'd and installing now. I haven't tried that one, and actually think I ended up with the GSM version I WAS using.
I'll let you know how it works.
Thanks...

Well, it still sits there while the screen "times" out. I thought the light sensor was supposed to dim the screen almost immediately. I'm on the call for 30-40 seconds before it dims, and then cuts off.
Is this a Sprint thing?

temperamentalman said:
Well, it still sits there while the screen "times" out. I thought the light sensor was supposed to dim the screen almost immediately. I'm on the call for 30-40 seconds before it dims, and then cuts off.
Is this a Sprint thing?
Click to expand...
Click to collapse
It should Dim after about 10 seconds (or whatever you have in the backlight Advanced setting under Battery). After about 40 seconds or so (same location) it should turn off the screen.
At least that's what mine does, just verified it again. Sounds like maybe your values are too high. After a HR they usually are by default.

Somehow it was at 30 (dim) and 1 min (off). That is a little high. Changed it to 10 / 40. We'll see what that does.
Thanks for the tip. I'll keep you posted.

Seems to now be working the way you explained!!! Thank you for the help!
Is there anything else out there, other than S2U2 that allow FULL SCREEN Caller ID pictures??? I don't want to reinstall that because the dialer is actually working right. I just miss full screen caller ID.
Thanks again.

That I don't know, sorry.

Eh...it's ok. I'd much rather have a dialer that works than a full screen picture of my ignorant brother.

you can also change the Slot Cycle Index in the epst settings... you'll need your MSL though
it's under "Modem Settings"

What is slot cycle and where are these settings? How do I find my MSL? I don't see "Modem Settings".

not trying to be an ass, but i suggest you do some searching. there is plenty of info on the subject
check out this thread - http://forum.ppcgeeks.com/showthread.php?t=48775&highlight=epst+poll
or here - http://forum.ppcgeeks.com/showpost.php?p=625185&postcount=14
and here - http://forum.ppcgeeks.com/showthread.php?t=42730&highlight=epst+poll

I don't think you are an ass...I'm thinking thanks for the threads!
I know search is my friend LOL

lol, no prob man...

Changed the SCI to 1. We'll see if that helps. There is always "0"!
I'm also seeing mixed reports/opinions on ACCOLC - Access Overload Class. Mine was defaulted at 8 on Sprint. People say leave it alone. People say set it lower. Others say set it higher.

i found that setting SCI to 1 is good enough, i'm able to catch my calls and haven't noticed decreased battery life from it so that's where mine stays.

Related

Interactive Touch (Like the Voyager)

I did a search on PPCGeeks, XDA, and Google, and couldn't find any app to make the touch screen on the Titan interactive - similar to the way the Voyager touch screen works (quick vibrate when the screen is touched).
Is there any app like this? If not, can someone make one?
Thanks!
You would think HTC being one (if not THEE one) #1 Smartphone manufacture that would have SOMETHING similiar to the iphone or Voyager. The HTC Cube to me is very "amatuer" looking compared to the iphone and Voyager UI. Even microsoft couldn't make anything similiar...hopefully WM7 will blow us away.
I agree that the Cube looks pretty basic (that's why I won't put it on my phone, but I do have the TouchFLO).
But what I'm looking for is for the phone to do a very quick vibrate whenever the screen is touched.
That technology is called Haptics and it is much more than just the phone vibrating. Haptics allows you to physically feel a vibration exactly on the spot of the screen you are touching. Your phone has to have Haptics vibration built into it to use it and there isn't a single HTC phone out there using the said technology.
http://www.immersion.com/corporate/press_room/what_is_haptics.php
worth a shot
vaxick said:
That technology is called Haptics and it is much more than just the phone vibrating. Haptics allows you to physically feel a vibration exactly on the spot of the screen you are touching. Your phone has to have Haptics vibration built into it to use it and there isn't a single HTC phone out there using the said technology.
http://www.immersion.com/corporate/press_room/what_is_haptics.php
Click to expand...
Click to collapse
Indeed.
That said, I'm still interested in any app that does simply what whiteblazer01 asked for. I'm always looking over my fingers when I'm trying to dial a phone number. I'd be willing to give a simple touch-response app a shot.
Anyone?
ryanshepherd said:
Indeed.
That said, I'm still interested in any app that does simply what whiteblazer01 asked for. I'm always looking over my fingers when I'm trying to dial a phone number. I'd be willing to give a simple touch-response app a shot.
Anyone?
Click to expand...
Click to collapse
I have been looking into this also. Especialy when i use the media player or just the main screen shortcuts.
In the mean time I was able to find a CAB somewhere in this forum that enables vibration feedback when you dial a number. It replaces the tone with vibration. I hope you guys like it. (Sorry I dont have support for it because I am not the original creator of this CAB)
Make sure that once you install the CAB that you soft reset after.
Hope you like it.
That's exactly what it is - Haptics. Thanks for the link. The program [email protected]$ put a link to (thanks!) works on the keypad, but it really doesn't feel like the Haptics system. O well, its still cool though.
I found a link to another thread on this forum for the same thing. http://forum.xda-developers.com/showthread.php?p=1685449
whiteblazer01 said:
That's exactly what it is - Haptics. Thanks for the link. The program [email protected]$ put a link to (thanks!) works on the keypad, but it really doesn't feel like the Haptics system. O well, its still cool though.
I found a link to another thread on this forum for the same thing. http://forum.xda-developers.com/showthread.php?p=1685449
Click to expand...
Click to collapse
I was thinkin about how we can make the phone vibrate when we tap the screen in any application instead of only the dial pad.
I came up with a theory that might give us some type of haptics feed back. It might not be exactly like haptics but it could make the phone vibrate.
There is a feature in our phone that can enable the phone to play a sound when we tap the screen for any reason. I was thinking why not replace the sound with just vibration like the CAB that changes the sound to vibration on the dialer?
Im not experienced at programming, but I am willing to take a shot into making this possible. Maybe some one can get a hold of a good programmer or some one good at registry tweaks to make this possible.
Just an idea
steps said:
You would think HTC being one (if not THEE one) #1 Smartphone manufacture that would have SOMETHING similiar to the iphone or Voyager. The HTC Cube to me is very "amatuer" looking compared to the iphone and Voyager UI. Even microsoft couldn't make anything similiar...hopefully WM7 will blow us away.
Click to expand...
Click to collapse
Voyager is hella gay
[email protected]$ said:
I have been looking into this also. Especialy when i use the media player or just the main screen shortcuts.
In the mean time I was able to find a CAB somewhere in this forum that enables vibration feedback when you dial a number. It replaces the tone with vibration. I hope you guys like it. (Sorry I dont have support for it because I am not the original creator of this CAB)
Make sure that once you install the CAB that you soft reset after.
Hope you like it.
Click to expand...
Click to collapse
Great Idea [email protected]$, deffinately move forward with it, Ive been using the phonepadvibrate (essentially the same as what you posted) for well over 2 months now and love it. If you could do the same with the normal touch screen it would be amazing.
Yes its not full haptics, but in my opinion it really doesnt need to be. some sort of physical feedback (ie a slight vibration) would be great when working with the touch screen.
[email protected]$ said:
I was thinkin about how we can make the phone vibrate when we tap the screen in any application instead of only the dial pad.
I came up with a theory that might give us some type of haptics feed back. It might not be exactly like haptics but it could make the phone vibrate.
There is a feature in our phone that can enable the phone to play a sound when we tap the screen for any reason. I was thinking why not replace the sound with just vibration like the CAB that changes the sound to vibration on the dialer?
Im not experienced at programming, but I am willing to take a shot into making this possible. Maybe some one can get a hold of a good programmer or some one good at registry tweaks to make this possible.
Just an idea
Click to expand...
Click to collapse
Carlos, I definitely agree, I would love to have that whenever the screen vibrated. Although, I don't know who would be willing to do that. I remember when I had the Apache (XV6700), I thought it would be cool if someone could make the LED lights on top into indicator lights for the shift and caps keys - which never happened (I don't know how, otherwise I would do it myself).
In fact, I wonder if someone can make a cab to have the shift and caps buttons make the indicator lights turn on whenever the buttons are pushed, not just when shift lock or caps lock are enabled.
Paul
whiteblazer01 said:
Carlos, I definitely agree, I would love to have that whenever the screen vibrated. Although, I don't know who would be willing to do that. I remember when I had the Apache (XV6700), I thought it would be cool if someone could make the LED lights on top into indicator lights for the shift and caps keys - which never happened (I don't know how, otherwise I would do it myself).
In fact, I wonder if someone can make a cab to have the shift and caps buttons make the indicator lights turn on whenever the buttons are pushed, not just when shift lock or caps lock are enabled.
Paul
Click to expand...
Click to collapse
It is very possible. I found other sources and they have some sort of program / prototype that can make this happen but it doesnt work on every tap of the screen.
What I want to do is make mine work on every tap of the screen but have the ability to turn it off and on to save power. Like turning the notification for the sound to play when you tap the screen on and off.
So far I have planned some steps to do it through the registry but since I am not an expert at programming like others are here it might take a while.
But any help is very welcome to complete this project and make it available for all.
As to changing the LED's on your phone. I think no2chem and some other guys found a way to customize your LED settings, but I'm not sure if it will be custom enough to indicate caps or shift. Maybe in the near future.
whiteblazer01 said:
I did a search on PPCGeeks, XDA, and Google, and couldn't find any app to make the touch screen on the Titan interactive - similar to the way the Voyager touch screen works (quick vibrate when the screen is touched).
Is there any app like this? If not, can someone make one?
Thanks!
Click to expand...
Click to collapse
this is a oem out there i havent seen Cab for it
Dc_striker said:
this is a oem out there i havent seen Cab for it
Click to expand...
Click to collapse
I am sure you probably have. I have the copy of the program that enables this feature. I believe it is extracted from a phone that has haptic feed back. But it is an executable.
This program is faulty. It doesn't respond on every tap and has performance issues. Other then that there hasn't been another one developed.
I'm trying to find a way to fix the issues of of the one that I found. Maybe by creating a new way to enable haptic feed back like I posted on previews posts, but it might take time to develop because I'm still learning how to mess with WM Reg. and programming.
[email protected]$ said:
I am sure you probably have. I have the copy of the program that enables this feature. I believe it is extracted from a phone that has haptic feed back. But it is an executable.
This program is faulty. It doesn't respond on every tap and has performance issues. Other then that there hasn't been another one developed.
I'm trying to find a way to fix the issues of of the one that I found. Maybe by creating a new way to enable haptic feed back like I posted on previews posts, but it might take time to develop because I'm still learning how to mess with WM Reg. and programming.
Click to expand...
Click to collapse
i still havent tried the program out yet i really dont see the use for it
Let me know what you find out Carlos. I would agree with you that it may be better to have the phone vibrate maybe when any button is pushed instead of anytime the screen is tapped (or maybe have the option to choose?), and also have the option to turn it off. Lol, maybe we can call it "Taptics" instead of Haptics.
As for the LED's, I'll check with some of the other guys about what they can do. I do a lot of modding myself with other electronics (cars, motorcycles, game consoles, etc...), but I don't really get into programming all that much (although the logic makes sense to me).
-Paul
Okay, so I noticed the phone does vibrate, however, when using the keypad while in a call, it makes a different tone, and does not vibrate.
Also, is there any update on ways to make all buttons vibrate (and configurable) when pressed? And of course, an option to turn the feature off?
whiteblazer01 said:
Okay, so I noticed the phone does vibrate, however, when using the keypad while in a call, it makes a different tone, and does not vibrate.
Also, is there any update on ways to make all buttons vibrate (and configurable) when pressed? And of course, an option to turn the feature off?
Click to expand...
Click to collapse
I am not sure for all buttons but there is a CAB to make the phone vibrate when you press the screen. I tried it out and it works, but it's faulty and kills performance.
I'm still working on this project. I haven't had much time to work with it, but if any break through happens then I will post it up.

[FIXED] VAlert 1.21 - Customize vibration pattern

VAlert
Customize vibration on phone ring
This small program allows customizing vibration incoming call alerts.
Windows based phones vibrate either before the ring or constantly during the ring.
Having a short ringtone can possibly solve this problem, but with long mp3 ringtone the phone will constantly vibrate during the ring.
This program will enable Windows Mobile phones to produce short vibrations when the phone rings.
Vibration patterns can be easily changed by the user.
Possibly to match vibration patterns to the ringtone, so the phone will vibrate in a rhythm.
Very low (~4K) memory usage
This software is a freeware.
How to use
1. Install the CAB
2. Enjoy the program with default settings
3. The program is hidden by default. To display program window (if needed), run the program again
7. In Phone->Options make sure ring type is Vibrate and Ring
4. Edit script.txt to change vibration pattern. Every line in the file is a pair of vibration length and note pause
5. From the program window run Menu->Test to test the created pattern
6. Perform Menu->Hide to hide program window
What's new:
- More devices support, including non-HTC
- The installer executes the program upon installation (no soft reset required)
- No vibration on waiting call
- Support for incoming call ring mute (stop vibration)
- Silent start
- Even lower memory footprint - ~4K on standby (was 11K before)
sounds cool
gunna try now
you should make it so you tap the screen to show when u want it to vibrate instead of editing the .txt file
Edit: Great app but confusing to change the pattern
Edit2: lol doesnt seem to work on my vogue when i go to phone->options and press play its just a long vibrate
Ohh man i was about to post a thread on something like this. Thank you so much for making this!
Sounds nice. Will try it out. Thanks for sharing.
bedaweed said:
Edit2: lol doesnt seem to work on my vogue when i go to phone->options and press play its just a long vibrate
Click to expand...
Click to collapse
Play from phone options is not implemented. Open the program and click Menu->Test or just try an incoming call.
oh okay im gunna try now
hmm.it may be useful.thx.
bedaweed said:
you should make it so you tap the screen to show when u want it to vibrate instead of editing the .txt file
Edit: Great app but confusing to change the pattern
Click to expand...
Click to collapse
+ 100 i would guess
Downloading now,.
Thanks for sharing sir!
to save people the bother of working it out themselves, and to get everyone started...
here's my version of the Nokia classic message vibration
i can't hum it, so you'll need to try it, i guess!
Edit : Oh, by the way... is it possible to do something like this for recieving SMS / MMS / Email, or is that a different process altogether?
Dr J said:
Edit : Oh, by the way... is it possible to do something like this for recieving SMS / MMS / Email, or is that a different process altogether?
Click to expand...
Click to collapse
Yeah, that's what I wanted to ask too! Would be awesome, would be a very useful app, thanks. And yup, maybe an easier way to edit vibrates would be nice. However, it's cool now, for a version 1.
Future versions
Post your suggestions. I am making a list of changes for the next version.
Suggestions :
- a settings UI on the device (instead of having to pull the txt file off to PC and edit and then put back in on device)
- ability to change between multiple vibrate scripts (via drop-down menu or list?)
- if possible (?) ability to use vibrate scripts for SMS / MMS / Email / Other alerts
- vibe scripts that match pattern with the actual ring / message tone would be VERY cool
excellent little program, thanks a lot for the effort
if the other message alerts can be changed from within this (or even just another separate small app) it's just what i'm looking for!
and please can other people post their script efforts, it'd be good to have several pre-sets to start out with.
there might be a slight bug in this
a few calls have come through recently, the vibrate kicks in itself and the ringtone does not play for about 10 seconds or so.
also the programmed pattern seems distorted.
it might just be my device, as i'm noticing that S2U2's full screen call ID has been struggling to kick in when a call comes in these days since i started using Manilla2D as well.
it might be that the device is struggling to find the ID picture and the ringtone and the vibrate pattern at the same time, all the while trying to run M2D.
i'd check if it works correctly without all these extras running, but M2D and S2U2 are pretty much essentials for me these days.
anyone else care to help?
Dr J said:
there might be a slight bug in this
a few calls have come through recently, the vibrate kicks in itself and the ringtone does not play for about 10 seconds or so.
also the programmed pattern seems distorted.
it might just be my device, as i'm noticing that S2U2's full screen call ID has been struggling to kick in when a call comes in these days since i started using Manilla2D as well.
it might be that the device is struggling to find the ID picture and the ringtone and the vibrate pattern at the same time, all the while trying to run M2D.
i'd check if it works correctly without all these extras running, but M2D and S2U2 are pretty much essentials for me these days.
anyone else care to help?
Click to expand...
Click to collapse
Do you have this problem with all calls or just some?
What do you mean by distorted pattern?
Does this problem happens when VAlert is disabled?
Thanks works great on my prophet with 6.1
ochakov said:
Do you have this problem with all calls or just some?
What do you mean by distorted pattern?
Does this problem happens when VAlert is disabled?
Click to expand...
Click to collapse
i have that problem with calls but its only like 2 seconds not 10
Sounds nice. Will try it out. Thanks for sharing.
bedaweed said:
i have that problem with calls but its only like 2 seconds not 10
Click to expand...
Click to collapse
That's not a delay. By default (there is a registry setting to change it) the ring is delayed by 2 seconds. VAlert does not have that delay, so it will always start vibrating 2 seconds before the ring.
Nice tool... works goodm i like it!!!

[UPDATE: 16th Mar] Notification LED v2.0.1 - FREE version uploaded on the Market!!

I've put this in the Development section because whilst it is almost fully functional, it still needs a lot of development. Please be aware of this when you download it. I am not to be held responsible for anything that may happen as a result of running this app.
Requirements:
Root Access & a Custom ROM (StreakDroid 1.8.0 recommended (CONFIRMED WORKING ON 1.8.0))
Built under a 2.2 framework. If you are running anything pre-2.2 please be aware it may not work.
Please remember to remove all previous versions of the app before installing.
Simply open the app and press the "Menu" button. I hope you can figure the rest out! Enjoy!
"LED Notification FREE" has been uploaded in the Market. It has full functionality and it Ad Supported.
Please be aware that this version includes an "AdBlocker Check". This will block the app from opening if you have an adblocker installed on your phone. Sorry about this but i hate adblockers Alternatively, you can just remove all instances of Admob from your Hosts file.
Code:
[I][B][COLOR="blue"]QUICK HANDCENT FIX[/COLOR][/B]:
Open Handcent, press 'Menu > Settings > Notification settings > Popup settings'.
[B]MAKE SURE[/B] 'Screen on for popup' is [B]UNCHECKED[/B].
Handcent wont interfere with my app from then on :D[/I]
NEW TO 2.0.1
Asks for SU Access when the app first loads Fixes some weird error that happens every now and again.
Completely re-coded the SMS receiver. Much smoother now!
SMS and Gmail Notifications can be turned on or off
New settings page - done properly now, wont save anything to sdcard [you can delete your STREAKLED folder now!] Press the 'menu' button when you open the app for settings.
Permissions tweaked (should be less LED problems)
KNOWN BUGS
Changing orientation during the pattern causes problems. Just don't do it!
Notifications overwrite each other. So if an SMS message arrives and then a Gmail, only the Menu button will be lit, and vice versa.
Services cannot be stopped (only by uninstalling) FIXED - 2.0
Sometimes all the buttons will end up being lit, not sure why. [SHOULD BE FIXED]
TODO
Add options for turning the SMS and Gmail notifications on and off DONE - 2.0
Have different patterns for each DONE - 1.3
Improve the UI (sort of) DONE - 2.0
Improve the pattern flashing sequence (sort of) DONE - 2.0
Clean up the code (WIP )DONE - 2.0
Fix orientation issue
This will ALWAYS be available for free on here, on Modaco and on my website (see sig) but i have uploaded a 'donate' version on the Android Market Place priced at £1.50, just incase you fancy buying me a beer
Enjoy
Meltus said:
I've put this in the Development section because it is not fully functional and still needs a lot of development. This is basically a proof of concept app.
Requirements: Root Access (tested on 2.1 but build under a 1.6 framework so it should work on 1.6)
All you have to do is run the application, hit the home button and receive a text (or send yourself one). If your phone is locked it will wake up and dim the screen and flash the home/menu/back LEDs in a nice pattern and then keep the screen dimmed until you unlock the phone manually.
The only problem is that you will receive a Force Close error message and you will then have the re-open the app for it to work again. I am trying to fix this but will not be able to look into it for a few days so i thought i would release what i've done so far.
I will be adding settings and more patterns as soon as i can fix this FC error.
Enjoy
Click to expand...
Click to collapse
Well... GREAT!!! Thanks! It works... Was searching this kind of app for weeks. Thanks again!
Great little app. Can't wait for thenext update
Nice work.
Just out of interest though, what's the dangers of having the screen on dim all night if I get a text message at stupid o'clock?
Wouldn't want to burn anything on my screen if that is possible.
Amdathlonuk said:
Nice work.
Just out of interest though, what's the dangers of having the screen on dim all night if I get a text message at stupid o'clock?
Wouldn't want to burn anything on my screen if that is possible.
Click to expand...
Click to collapse
Screen burn is an issue on LCD screens, hence why i set it to do a dim wake lock instead of a full brightness one. Saying that, i have absolutely no idea whether screen burn would still occur but ill test it tonight and report back
On a positive note i have fixed the FC error and will release the fully working version tomorrow!!
Nice work dude ! Look forward to a full release tomorrow.
Any way to make this compatible with non rooted steaks on 1.6?
Sent from my Dell Streak using XDA App
jdmnash said:
Any way to make this compatible with non rooted steaks on 1.6?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
No, i'm afraid not.
Without Root Access it will probably just force close.
Currently in the process of adding more LED patterns
It also now wakes the phone, unlocks the phone and displays an "SMS Message Received" popup which it then hangs at until you close it.
Do you guys think this is better or should I make it lock the screen instead?
What else should i add/change?
Meltus said:
Do you guys think this is better or should I make it lock the screen instead?
What else should i add/change?
Click to expand...
Click to collapse
I'd prefer it stayed locked, also if I read this thread correctly, it leaves the screen on (but dimmed?) is that true? I would need it to kill the screen, because as noted, it could kill your battery if you went a long time w/o clearing the alert.
Nice work so far though...
a042349 said:
I'd prefer it stayed locked, also if I read this thread correctly, it leaves the screen on (but dimmed?) is that true? I would need it to kill the screen, because as noted, it could kill your battery if you went a long time w/o clearing the alert.
Nice work so far though...
Click to expand...
Click to collapse
Yeah, that's the only problem.
unfortunately, killing the screen freezes the LEDs in whatever state they're in, completely defying the point of the app
What i could do though, is wake up the screen, flash the LEDs but leave one on and turn the screen back off. This would turn everything off apart from that 1 LED and you could use different LEDs for different notifications. I'll try that out later.
Yeah, that seems like a good idea. Maybe the Back LED for missed SMS, the Menu LED for missed call. Something like that.
That would be cool, I'll await your work and give it a try.
Well, it turns out that works miles better than what i was trying before.
Basically, it now turns the screen on, keeps it locked, flashes the LEDs, turns the screen back off and leaves the home LED on.
Give me about 10 mins and i'll put up a working version. No FC error this time
Can't wait for this!
Sent from my Dell Streak using XDA App
First post updated with a working version
None of the options work on the main screen yet, but they will.
Enjoy
I haven't tried this yet, but I just want to say THANKS! No notification light was driving me crazy! I'm gonna install it now. I like that it would kill the screen but leave the LED light on. That's perfect!
**EDIT**
Well, it didn't work perfectly. Here's what happened on my Beta Streak....
With locking disabled (I use the 'NO LOCK' widget), it turned the screen on and said 'SMS received' and the home LED was on, for about 1-2 minutes, then both went off. When I turned back on the screen and read the msg, the LED went out.
With locking enabled, like most people would be using the app, the screen turned on for a few seconds while the LED pulsed, then both went out. No notification. When I unlock and read the msg, the home LED stays on. I have to 'clear' the app in the notification tray and lock then unlock the screen to make the home LED go out.
Seems like they're little tweaks that could be needed. If you can make this work and be functional, I'll donate to your Paypal! Again, thanks for your work on this project!!
Yeah, it's still pretty much in it's 'Alpha' stage
Cheers, for the feedback, i'll look into the errors.
I know that if the screen is unlocked the Home LED will stay on until you lock/unlock the screen, but that should be an easy fix (hopefully), and i've not set up the Thread's quite right i don't think which could be causing the timing errors.
I'll be spending all of tomorrow getting this thing working so i'll report back
Awesome! You are the man!
A thought for down the road development:
Earlier today when I was thinking about this, I imagined an interface where the user could "record" their own flash sequence for each type of notification they had - email, sms, mms, missed call, etc. Just choose which notification they want to specify, click record, then tap the capacitive buttons in the sequence you want them to light up, then end the recording. Interval timing could be recorded or specified manually. Just a few ideas!
Thanks so much for this. I'll give it a run soon.
Awesome work. Wanted something like this. I hope you will be able to add notifications for misssed calls and gmail as well. Keeping my fingers crossed.

[Q] Dynamic contrast/Backlight pulsating at very specific brightness

I have a couple of "issues" with the phone. Not sure if its software related or hardware related. Maybe you guys can check on yours too see if it happens. This is all on stock ATT rom
It seems the One has "dynamic contrast" enabled by default. When scrolling on webpages, for example, if I come to an area with a dark advertisement, the brightness adjusts very slightly most of the time. Thats all well and good but the annoying thing is that it does it in steps causing quick blinks of the backlight. Its most pronounced at medium brightness. The same "blinking" happen when autobrightness wants to set the brightness to a very low level . It does it in very discrete steps and it takes a long time for the brightness to settle to its minimum.
If i set my brightness to 50% (most prevalent when the slider is under the "t" in brightness) I get a VERY subtle, but constant pulsating of the backlight. Again, Its a very subtle but my eyes pick it up regardless and its distracting as hell. I wouldn't mind it if autobrightness didn't hit this brightness level, but it does sometimes indoors. The effect is best seen on a mixed white and color screen, like a homescreen with a white widget and most websites. If the brightness goes a bit above or below this level, the pulsing goes away . Anyone else seeing this? maybe it happens at a different brightnesses on different screens.
Thanks
I noticed this when watching a video today. Maybe it only happens if you have autobrightness on?
Sent from my HTC One
It happens with autobrightness off for me. I actually tested it a bit more. I happens on a variety of backlight settings depending on what's on the screen.
At approx. 33% brightness (im using an app called screen adjuster to set the system brightness to a specific value), the screen does heavy pulsating on an all white image. For example, if I go to "about:blank" in the web browser. I can be seen on a desktop screen with a white widget or the settings menu.
Same thing at 40. Worst is 33% though. I have a feeling its dynamic contrast going haywire at certain brightnesses. If you turn the screen off then on, it doesnt do it for a second or 2, but then it will start. I haven't been able to find a demo unit anywhere around me to test this out. So if someone can check this on their device, I would appreciate it. Please use Screen Adjuster to get a definitive reading on the brightness. (Use the slider in "system brightness" to set it to a specific brightbess) and go to "about:blank" in the default browser
hi..
i had the widget set on the third setting, the fourth being the brightest. i had the same problem with my first phone and thought at the time it may have been a backlight problem? or power flow problem? i sent that phone back and the next phone did the same? after posting on here.. i removed the widget and manually adjusted the brightness. i like the screen quite bright, manual adjustment cleared the problem for me. i gotta say yep the flicker was more visible on screens with alot of white, google, facebook, texts? and way way annoying! i can only suggest you try the same as i did? perhaps it is just a quirk with the htc? or maybe the os? you never know, when the update to keylime or whatever it is called comes out the flicker may go totally?
JUST had this on facebook? hope it helps?
HTC One
HTC One : Update Available (1.29.401.12)
HTC is currently deploying an update for the new One
Version: 1.29.401.12 - Size: 229.04 MB
It includes :
- System Optimization
... - Updating Service Location
- HTC Zoe: Optimizing sound quality
- Camera: Optimizing Parameters
- Beats Audio: Sound enhancement
- other fixes
coming soon...
shep98 said:
hi..
i had the widget set on the third setting, the fourth being the brightest. i had the same problem with my first phone and thought at the time it may have been a backlight problem? or power flow problem? i sent that phone back and the next phone did the same? after posting on here.. i removed the widget and manually adjusted the brightness. i like the screen quite bright, manual adjustment cleared the problem for me. i gotta say yep the flicker was more visible on screens with alot of white, google, facebook, texts? and way way annoying! i can only suggest you try the same as i did? perhaps it is just a quirk with the htc? or maybe the os? you never know, when the update to keylime or whatever it is called comes out the flicker may go totally?
JUST had this on facebook? hope it helps?
HTC One
HTC One : Update Available (1.29.401.12)
HTC is currently deploying an update for the new One
Version: 1.29.401.12 - Size: 229.04 MB
It includes :
- System Optimization
... - Updating Service Location
- HTC Zoe: Optimizing sound quality
- Camera: Optimizing Parameters
- Beats Audio: Sound enhancement
- other fixes
coming soon...
Click to expand...
Click to collapse
Thanks for the response. I ended up looking at 4 more devices at 2 different stores and they all had the flicker. The sales associates even saw it. I got tired of doing exchanges and I ended up reversing my upgrade. Im going to wait and see what happens with this issue. Hopefully it gets sorted out with a firmware update, because otherwise its an awesome phone. Its a shame that the $100 trade-in offer is going to end by then and I wont be getting a free medialink device, but atleast i'd be able to get it in black, which is what I originally wanted.
Ive noticed this too and its really annoying me. Ive tried multiple roms including the new asop carbon rom and its even on that.
Mr Sliff said:
Ive noticed this too and its really annoying me. Ive tried multiple roms including the new asop carbon rom and its even on that.
Click to expand...
Click to collapse
In addition to the phones I exchanged, every display model that I've come across has had it. I'm was a bit surprised at first that not many people have come across this. I'm starting to think that maybe the One has a PWM backlighting, which some folks are sensitive to and some don't even notice. I'm in the former category and I think you are too. It a shame really that this problem exist. Besides that, I couldn't find any other faults with the phone. It was perfect in every other aspect
I've run Into the same exact behavior using the HTC droid DNA with both sense 4+ and sense 5 ROMs. I smell tomfoolery afoot.
Screen Flicker
I'm glad I'm not the only one that has noticed this. It doesn't stay that way very long for me, but it is quite annoying. Seems to happen when there's a white or light-colored background the most. So I guess there's nothing specifically wrong with my phone and we'll either have to live with it or wait until someone figures out how to fix it?
I guess most people don't notice this.m it's extremely irrational going between this and my tablet and having the black.ighting flashing in my face when I scroll through webpages.

Some questions by new owner and ex-tablet-Z owner.

OK so I got my Z4 tablet three days ago. Fantastic construction, fantastic specs on paper.
I had a Z tablet up until last weekend that I sold for a good price and got this as a much needed replacement.
Both are LTE versions.
Anyway, here are some things I've noticed and I would like to have your comments on.
1) The "antitheft" system for the first two days seemed to be a PITA. As my device is set for three users (me, my wife, my son), it kept popping for the others that it locked and needed MY credentials to unlock. I did unlock it at least five times for each, which means I can't really be... far from the device and let them use it. That I use two step authentication, makes things even harder. Once my "authenticator" phone was out of power and I had to wait several minutes to unlock the tablet. Yesterday I updated to latest firmware and I haven't noticed the issue since. But it's just one day, it may come back. Once (before updating firmware) I tried to disable My Xperia (although I love the find my device feature) so they could work, but it kept me "waiting". In the end I pressed back and it didn't get disabled. Any similar experiences with the theft protection?
2) Backlight (set in auto) seems to be too dark some times. I clicked on the intensity bar, set it brighter while STILL in auto (like it is now set to have a brighter "base value"?). Does this sound normal?
3) This is not a Z4 issue, I also had this in Z. It's probably a lollipop thing or I don't understand something properly. Clicking the volume buttons I can set it to "no" sound from home screen. Or so I think. Because even if I set it to "off", apps STILL have sound and I have to RE-adjust the volume to off from within the app (without the "priority buttons" under the volume bar)... Am I the only one to find this stupid?
4) Anybody notices some lag or ESPECIALLY stuck web browser, when other profiles (users) have run apps? If I reset the device and not visit the other profiles, the device is more snappy. If some other user goes in, even quiting every app they run, the device seems to get slower when back in "owner" user. Still fast but not as "snappy". Anybody noticed the same?
5) Any idea when we get Android M? Will we get 5.1 before that? I mean official firmware. Anybody?
6) Is there a way to go to test menu? The tablet Z method doesn't seem to work.
7) Serious. No restricted profiles. Why? Sony support replied that lollipop has this disabled only on 3G/LTE devices (that makes no sense), yet my Z was also LTE and both are on lollipop 5.0.2 and it DID have restricted profiles. What's up with that?
Thank you for your time people, have fun.
...wow
2) Yes.. brightness is usually set a little low at first for battery purposes.
3) There are different volumes for different things. Using the volume rocker on the home screen and putting it all the way down will only adjust ringer/notification volume. In-app sounds will use the media volume which you will need to adjust while media sounds are playing or you can adjust it in your sound settings. Not stupid imo, just gives more flexibility.
5) It'll come when it comes.. nobody knows except google and sony. I'd like to hope we'd get 5.1 before 6.
(pending something on the other questions above)
2) So the set value, when brightness is in "auto" is like a base value?
3) Well I find it stupid. Why: Because when I am in home screen I used to be able to manage the universal audio settings of the device. Turning device to mute, would turn it to mute. As simple as that. Also clicking a simple icon next to volume bar, you could separately adjust notification and ringer and stuff like that. Now? You THINK you set your device to mute, but you have only set the notifications. You sleep in a silent house (next to the wife or something), start a game, it YELLS with the last volume settings, ignoring that you set the device to mute in home screen and you have to "run" and re-adjust the volume to zero, usually with some delay (in the meantime waking everybody) since the device won't let you adjust anything while loading the game. No, I call this stupid.
5) Well if it won't delay 6, I don't mind for 5.1. But I want 6 the soonest possible.

Categories

Resources