Related
Hi.
During upgrade to Crystal V3, I get this error at the end:
Please look at attached image...
Anyone knows what the fault is?
PS. This is the new Prophet that I got as a replacement for the old, bricked one...
Regards.
Try to move the install folder to C:/
I'm not sure if it is the same error message, but months ago I had the same prob and after this it worked.
Good luck
Tried, no luck...
hifiasylum said:
Tried, no luck...
Click to expand...
Click to collapse
reset phone and restart PC.. after that install aku 2.2 and retry..
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
hifiasylum said:
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
Click to expand...
Click to collapse
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Did you perform step1 before running Crystal upgrade?
I had the same problem... It worked successfully on a different computer.
panda88 said:
Did you perform step1 before running Crystal upgrade?
Click to expand...
Click to collapse
Yes, I allways downgrade before I upgrade.
Really, I do.
l3v5y said:
I had the same problem... It worked successfully on a different computer.
Click to expand...
Click to collapse
I have now tried 6 different computers, no luck. Believe that the fault is that I must unlock the phone or something. Donno, maybe the easiest thing is to sell the whole phone and get one a little more "programming friendly"?
dkleuven said:
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Click to expand...
Click to collapse
You dont think this will in some way or the other f_ _k up my Prophet?
hifiasylum said:
You dont think this will in some way or the other f_ _k up my Prophet?
Click to expand...
Click to collapse
It shouln't!
I saw from one of the thread, somebody also has the same exact problem, this is caused by the path is too long. It is suggested to put it in C:\, which you said you have done. The other person reported that it's working after he moved the installation file. I dun understand why it wouldn't work with yours.
Here is the post, finally found it:
http://forum.xda-developers.com/showthread.php?p=1549150#post1549150
User reported the problem was solved in #318
did u unlock CID yet?
Hi again. Found the problem. It seems that I was using a somewhat corrupt downloaded rom. The rom was ok, but it must have been destroyed during the downloadprocess.
Now the phone has Gullum Touch IX installed and works like a charm.
Thank for all your help, great forum!
Regards, Lars
818pro problem during upgrade to wm6
hai..
during upgrade my dopod 818pro to wm6, suddenly blackout and my upgrading was disrupted.. i reset back my dopod 818pro to continue back my upgrading..
but, I'm facing a problem which it's just hanging at start up screen..
i already try hard reset many time, but still can't to operate..
i just want to synchronize back to my pc to continue back my upgrading...
could somebody help me to this matter.. i don't know what to do now..
if it can enter bootloader, check the wiki for recovery, and follow it through.
I tried to follow all the steps but I think I screwed up and my phone just keeps resetting to the touch pro splash screen over and over again! I need to fix this. Sprint touch pro
Edit: I tried hard reset and no luck, I feel stupid but I don't want to replace the phone, sigh, I really need help!
I'm trying not to whine and I know this is my fault, but is there any fix at all?
josiah7 said:
I tried to follow all the steps but I think I screwed up and my phone just keeps resetting to the touch pro splash screen over and over again! I need to fix this. Sprint touch pro
Edit: I tried hard reset and no luck, I feel stupid but I don't want to replace the phone, sigh, I really need help!
I'm trying not to whine and I know this is my fault, but is there any fix at all?
Click to expand...
Click to collapse
Just flash back to Stock and start again.
you dont have to flash back to stock...just reflash to another rom...make sure that you get a cdma rom...sounds like you might have installed a gsm one...its happened to me before...
Yeah I did and thanks the advice worked and am now running a custom CDMA ROM and loving 6.5! I;ll be sure to be more careful in the future, thanks guys!
I have a Hermes, with the pin of the USB that makes connection to PC broken... So my only shot to update the ppc is from SD.
The rom i have is one of the 1st realeses of hermes wm6.5, so that stucks all the time, even i hard reset it...
When i try to update something from SD i cant because gives me that error 000602... Any idea? So i have to unlock the cid, but if i cant access to the windows what i must do?
If i hard reset it, it enter in windows, but 2 ou 3 seconds that stuck :S
Please help me, i dont wanna be another one with a bricked pda...
gajodafeira said:
I have a Hermes, with the pin of the USB that makes connection to PC broken... So my only shot to update the ppc is from SD.
The rom i have is one of the 1st realeses of hermes wm6.5, so that stucks all the time, even i hard reset it...
When i try to update something from SD i cant because gives me that error 000602... Any idea? So i have to unlock the cid, but if i cant access to the windows what i must do?
If i hard reset it, it enter in windows, but 2 ou 3 seconds that stuck :S
Please help me, i dont wanna be another one with a bricked pda...
Click to expand...
Click to collapse
Did you install HardSPL before flashing from the SD card?
Shawn80 said:
Did you install HardSPL before flashing from the SD card?
Click to expand...
Click to collapse
Thanks for your reply. Before the instalation of that rom, i have installed 6 or more roms for weeks, without installing HardSPL... Pretty noob, but :S
gajodafeira said:
Thanks for your reply. Before the instalation of that rom, i have installed 6 or more roms for weeks, without installing HardSPL... Pretty noob, but :S
Click to expand...
Click to collapse
Hell bro it's cool. I am still a n00b myself.
But you really needed to install HardSPL before trying to flash any ROM.
I dunno what to do for you bro.
Nevermind I see you have already asked in this threadhttp://forum.xda-developers.com/showthread.php?t=323253&page=2
and it seems that ultramag69 has already answered the question.
Sorry bro this is why you should ALWAYS have HardSPL installed before even attempting to flash a ROM.
Shawn80 said:
Hell bro it's cool. I am still a n00b myself.
But you really needed to install HardSPL before trying to flash any ROM.
I dunno what to do for you bro.
Nevermind I see you have already asked in this threadhttp://forum.xda-developers.com/showthread.php?t=323253&page=2
and it seems that ultramag69 has already answered the question.
Sorry bro this is why you should ALWAYS have HardSPL installed before even attempting to flash a ROM.
Click to expand...
Click to collapse
Lol do you believe that i had 6 PPC and all of them was flashed with new roms, and i NEVER changed the HardSPL with no consequences? I sent the Hermes to a friend. He says that he needs the electronic scheme to do the electronic correction... Do you know where the hell i can find that?
Try searching for JTAG... You might get the info you require...
Hello
I installed MIUI and by mistake activated touch calibration and that messet up my touch totally, its all unresponsive now, fastboot new kernel and a clean install does not help at all.
What can be done ? cant unlock phone, (possible via ADB?) and my thought is to start some calibration-software via adb + am.
Any suggestions? Experia Active. all unresponsive touch screen, not even the back / home / menu buttons work..
Please help!
First of all this isnt a Q&A section.
Second of all, reinstall MIUI, after you have cleared data.
First - Sorry, I realized the q&a afterwards.
second - does not work, reinstalled cm7 cm9 and stock and touch is still unresponsive.
edit: to be extra clear, The phone starts all fine, but I cannot unlock PIN nor unlock lockscreen because the touch is not responding.
Every Rom has a specific Kerbel that needs to be installed for it to work properly. If I were you, if flashing and wiping didnt work, id restore a stock ftf using flashtool.
damme_w said:
First - Sorry, I realized the q&a afterwards.
second - does not work, reinstalled cm7 cm9 and stock and touch is still unresponsive.
edit: to be extra clear, The phone starts all fine, but I cannot unlock PIN nor unlock lockscreen because the touch is not responding.
Click to expand...
Click to collapse
Try to flash with the recommended kernel from the rom you choose. Maybe it's a problem from your hardware. I face that kind of situation when using Xperia Mini.
Sent from my SK17i using xda premium
Get back to stock firmware via full .ftf file.
Man i just noticed you installed the miui for live with walkman only from lasan that is a big no no.
If you want miui install the one from expeacer here http://forum.xda-developers.com/showthread.php?t=1578109 it should work well.
And remember to read the first post and to make sure the rom is compatible with your device.
I managed to fix the problem, I tried the tft stock, but didnt work either, but then I tried tft again the usb-cable got unplugged and boot img got corrupted, after tft again it worked!
Yes, I feel a bit noob installing the wrong rom...
Thanks for the help! keep up the good work!!
I installed ultimate hd rom 2.0.2 on st15i, everything went well but i choosed locked bootloader not unlocked. Now my touch screen and touch keys are dead. I have tried everything but nothing worked. If someone has a solution, please share it with me. Thanks in advance
Are you sure you choosed the correct device in aroma?
There are threads in general section on how to fix touch screen issues.
If it didn't fix the problem, I'm sorry you will have to send it to the repair center.
Good luck.
Sent from my Xperia Mini using xda app-developers app
I choosed the wrong bootloader . I have flashed the hybrom v10 and the touch screen is partialy working (somehow distorted), touch keys work. With any other rom the touch screen and touch keys stop working. Please help me
JOVICAMPEK said:
I choosed the wrong bootloader . I have flashed the hybrom v10 and the touch screen is partialy working (somehow distorted), touch keys work. With any other rom the touch screen and touch keys stop working. Please help me
Click to expand...
Click to collapse
And you tried every method given in my thread, where all methods are collected?
Yes, my phone was working propery, ive installed many roms on it. Itried to install ultimate hd 2.0.2 and when it booted the touch was not working. http://forum.xda-developers.com/showthread.php?t=2104484 collected metods
finally fixed!
Hello i just want to say that i fixed my phone after 4 day of trouble. I used this metod:
Fix 4: By Flashing Hybrom_v10: (Credits: javad01; here)
1. Flash your device's stock gingerbread rom (4.0.2.A.0.62) with flashtool
2. Flash a custom kernel with cwm you like (e.g. rage kernel)
3. Flash Hybrom v10 for mini pro
4. Boot the rom
5. If it's not booting and having a bootloop pull battery
6. Flash stock rom again with flashtool
When i first tried it it didn't work,but i kept trying and it finally worked!
Close this thread
if all the way still doesn't work, bring your device to service center. if your guarantee void, they will charge.