Related
Dear Community, Dear Experts, Dear Gurus ,
I am hoping for your help. Unfortuntately the Speaker in my HTC TyTn died
and I need to send back the TYTN to the service center in order to get most likely the speaker replaced ( dead ).
Here my isue:
I want to flash the original stock rom, which is:
RUU_Hermes_1.18.257.2_1.18.257.106_1.03.03.10_Qtek_GER_Ship.exe
I have running now and downgraded from WM6 to WM5:
HTC_BOOT HERM200 IPL-1.04 SPL-2.10.Olipro ->>> not OK :-(
ROM HTC German QTEK_102 1.18.257.2 05/30/06 ->>> OK
EXTROM 1.18.257.106 ->>> OK
RadioRom 1.41.00.10 ->>> not OK :-(
Protocol 32.34.7010.01H ->>> OK
OS Build 14955.2.3.0 ->>> OK
AKU 2.3 ->>> OK
The issue is now, how can I restore the original bootloader ? I can only
flash the rom with the RUUWrapper, the result of flashing the original stock
rom is then, that I am still stuck with the modified bootloader and a corrupted
radio rom. Radio Rom was "fixed" by me by flashing the latest version.
If I would try to use the original flasher I would always get an Update Error [260].
So what can I do to resotre the HTC TyTn to its original status, so that the warranty is not voided ... original stock bootloader, radio rom image and so on.
Thanks a lot and hoping for your support, since I am realy lost here.
Sbrani
grab sspl (soft spl) and use that to flash a stock bootloader only.
as far as i know you cannot downgrade the radio due to it being bootloader 0108 variant, but not having a hermes i might be wrong
You can restore the original SPL bootloader by using SSPL but you will not be able to downgrade the Radio as the original has HTC_BOOT 0106.
You have already checked these guys that they haven't released an update?
First of all, thanks a lot for replying, but still the question is, how I can get rid of the HERM200 IPL-1.04 SPL-2.10.Olipro Bootloader. I would need to downgrade once again to the original HTC bootlader 106. As long as I have the other one, I will always end up, with a non working radio rom, since this stone old radio rom is not compatible with the new "IPL-1.04 SPL-2.10" bootlader. Any further Ideas ? Anyway the sspl (soft spl) did the trick and was able to flash orignal rom, but unfortunately with the same result, still not the original bootloader and the radio rom is now again corrupted :-(.
The bootloader hindering you from downgrading to the original radio is not the IPL/SPL combo but instead the built-in bootloader of the radio itself. Read more in the Wiki.
To put back your original SPL loader, use NBHextract to extract the SPL image from the ROM update file you used to downgrade the other bits in your phone, then use NBHgen to create an update file containing only the SPL and then use SSPL for the update.
Hey great support here ! Finally I also managed to restore the original bootloader, which is HERM200 IPL-1.00 HERM200 SPL-1.04. Now I only have to get the original radio rom running. Thanks a lot, seems that I can think now of actually reaching the final goal. I learned a lot. Great community !!!
You're missing the point about the radio. Let me repeat:
You can't install the original radio ROM. You will brick the phone!
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108, but not 0106. Your original radio has 0106, so if you flash it you'll get a NoGSM error and a bricked phone.
about downgrading to WM5
pof said:
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108,
Click to expand...
Click to collapse
Well Pof, abubasim, Couldn’t sbrani downgrade the radio with custom RUU to his own original Rom Radio first?? (almost the official known Radio is 1.38) then following your description. At that time he gone have WM5 Rom and same Radio as original, I just wondering if u can du like this
Don't worry guys I bricked several times now the radio rom . It's just that it is then extra work. I will keep you updated, as soon I have news, for now I can't see anymore those "upgrading" tools. I will try it again tomorrow.
you where able to unbrick because you had HardSPL, but now you have SPL-1.04 which will not allow you to flash unsigned code.
By the way, did anybody have experience with HTC or better to say HTC Serivce Providers. As far as I know I have to send it to Teleservice in Germany. Are they realy checking the installed rom ? Thanks for the info.
Ok, I made it finally, I will post exactly how I did it, maybe it helps someone who will be in the same situation.
Thanks once again, great SUPPORT !!
Sure you'd HELP me!
Hi there,
Hi Sbrani, I'm in the exactly same situation: HTC TYTN (Orange France) without speaker... and needing to go to french HTC support.
I upgraded both ROM and Radio to the latest versions following step by step the tutorial found here and on mr (???) on its website (very well done by the way).
Sbrani, Please could you help me to restore as you did, my factory defaults?
Regards
Fly
Can you give more facts ? Pls look into my first thread and put down the infos. Thx
Guideline: How to downgrade to an original rom
Ok here we go this is how I solved this issue.
First you need to understand the difference between a normal SPL
and the modified SPls, which you can get here:
http://forum.xda-developers.com/showthread.php?t=296722
A standard SPL will not accept any unsigned code !
In case you bricked it already look here :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
1. you need to figure out, which radio rom matches your rom you want to flash, otherwise you end up with a bricked radio rom or even totally bricked,
if you have a standard SPL.
2.Please check it here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
for the roms
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
for the radio roms
3.Looking at my ROM, which I needed I flashed 1.10 - Olipro SPL - based on 1.04,
I flashed it by using SSPL.
4.I flashed then the needed the radio rom
which was Radio upgrade only using CustomRUU 4.3 V 1.38.30.10
5.I used then Custom RUU Updater flashing the needed rom,
but without the included radio rom.
Costum RUU Updater you can find here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU
extracting and modifying is explained here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
actually it is an how to downgrade from WM6 to WM6.
Please have a close look on how to extract the rom and how to create a
costum rom, which will fit your needs. The self made rom,
should then include the original IPL and SPL loader.
I finally used again SSPL to flash the self cooked rom.
Sorry if the guide is not very precise or not correct at all !!
Everybody is welcome to correct me and to finetune this guide.
LAST BUT NOT LEAST, please read the HERMES WIKI, it was a great help for me !!
Thank you!
You deserve a Very Very Warm thank you!
I'll try all you advised me this week-end.
Regards,
FlY
it's very good already. i think you should get it incorporated into MrVanx's guide as a downgrade for servicing section
Thanks for your guide sbrani, I have not had to downgrade yet, but it something that is in the back of my mind as I know it will be very difficult if I ever need to.
I would also second the comment that I would be very grateful to MrVanx if he wrote a general guide on how to return to factory condition , as it is much more involved than upgrading. It's one thing to flash a phone, a totally different thing to customise a ROM update in order to only flash a specified portion.
@sbrani:
What version is your radio ROM at now? 1.03.03.10 or 1.38.30.10?
hi guys,
I don't currently have my Athena yet, but Midget_1990 sent me anSPL to work on and I've successfully (well, pretty damn sure I have) patched it to see your device as SuperCID and to accept unsigned code.
If anyone out there can get on IRC so we can try flashing the new SPL via pdocwrite then we can get somewhere, I'll need you to help me find what address the damn is stored at of course but that shouldn't take too long to do.
Cheers,
Olipro.
Ok, I have to ask, and look dumb...
What ARE the IPL and SPL ?
im ready...if you want
MSN: [email protected]
I am desperately in search to unbrick my ameo. So i am willing to test this. I send you pm with my messenger details. Or pls send back pm on how to contact you to test this.
Ok, here's an update:
Thanks to the co-operation of a rather friendly italian chap, I've found the blocksize and address of the SPL on the DoC, so now it's just a case of someone flashing my patched one via itsutils and then getting in touch with me to see if it really has flashed.
Olipro said:
Ok, here's an update:
Thanks to the co-operation of a rather friendly italian chap, I've found the blocksize and address of the SPL on the DoC, so now it's just a case of someone flashing my patched one via itsutils and then getting in touch with me to see if it really has flashed.
Click to expand...
Click to collapse
i'm ready to test
tnx
me too
My athena love crash test
OK, I'd quite like to look at the 1.10 SPL.
does anyone here have a 1.10 SPL on their Athena? dumping it is a very simple (and safe) process.
I have 1.06 for you if you want.
and any eta when we can download the spl to flash our cid locked devices?
rwijnhov said:
I have 1.06 for you if you want.
Click to expand...
Click to collapse
yeah, I'll take that too .
the more versions I can get hold of to have a play around with the better.
ETA? no idea.
ok pls tell me to get the 1.06 version to you. maybe you can contact me by msn my adress is in your pm box.
Olipro said:
OK, I'd quite like to look at the 1.10 SPL.
does anyone here have a 1.10 SPL on their Athena? dumping it is a very simple (and safe) process.
Click to expand...
Click to collapse
I have
ATHE100 (HTC X7500) Unbranded- no Operator
IPL - v1.00
SPL - v1.10 RP00
What do i need to do to get you the SPL?
My Athena and PC are yours whenever you want......
With the cooperation of a kind soul (and risk-taker) I have been able to get my SPL on their device and it works. we're home free boys
pls can you give us a download and instructions? I would realy like to unbrick my device. So if you could be so kind.
rwijnhov said:
pls can you give us a download and instructions? I would realy like to unbrick my device. So if you could be so kind.
Click to expand...
Click to collapse
your device can't be unbricked. you need access to Windows Mobile.
but i still have acces to boatloader and my device is still flashable it will only give me vendor id error. only problem is i can't get past second tmobile splash screen. So when I flash your spl I should be able to flash other rom afterwards I think?
nope, not at all.
However; consequently; I flashed my SPL to someone's Athena tonight who didn't have the device SuperCID'd and with it the WM6 ROM flashed. so it seems it works as I anticipated.
This means that it should be possible to flash an unlocked radio with it and remove your simlock for free
Super CID My Dopod U1000
I really couldnt believe that my dopod u1000 is going to be Super CID soon. I had amazed at Olipro's work when I had my Herms, now he is proving again that he is the best. All the best Olipro. Just made a donation for you buddy under name 'manugsv'
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Bram87 said:
Hi & welcome!
Ok..understand your problem and this is your first post and maybe you thought, "aah nice forum, He WM6 that looks nice, lets flash it on my device" ..Right simple ah? But..what you forgot..is to backup or read more about flashing..You cant reset it back to the original (what you wanna call it) "firmware"...
Click to expand...
Click to collapse
Well, this is not EXACTLY correct. Check out THIS LINK for downgrade directions. You will need to get the original ROM from somewhere. It is possible that it is HERE IN THE WIKI. Chances are that one of the files there has the same Radio, IPL & SPL. You will just need to find the OS, if it is not in there. (In fact, based on the specs, it looks like the third from the bottom of the English ones - Vodafone?) To flash, you will need dutty's good nbh tool to unpack the ROM, becuase you will need to do the IPL and SPL separately from the OS and radio. See THIS LINK for that info. If you don't want to get into all the unpacking, you *could* do the SPL downgrade first, then the upgrade, but it is generally good practice to downgrade SPL as a LAST step since you lose the hardspl protection as soon as you do it. Finally, use the google search link in my signature if you need to find anything else. Good luck.
zetax said:
Hello
I.m new in the forum,i'm writing from italy and here i'can't find a valid and perfect forum like this,
yesterday i had my new Uk Vpa Compact 1605(Herm200) , with
Ipl 1.01
Spl 1.09
Os 5.1.461(Build 15671.3.3.0)
Rom vers. 2.07.161.1 released the 2nd of giune 2007
Radio 1.32.00.00
Protocol 32.65.7020.09W
At the end of the day i flashed Hardspl with new ipl 1.04 and spl 2.10
and new official Wm6.
now my questions is.. Can i reflash in my Vodafone 1605 all the original rom ,spl,ipl,radio, Os etc. etc. ???
If it is possible,where can i find all the file?
Thank you to alla for the help and congratulations for this fantastic forum
Click to expand...
Click to collapse
Like Todd said it is possible.
Check out the links in my signature and read alot before actually doing so.....
That is a practice tip
The Mr VanX guide alias HTC Hermes guide has complete steps to do this!
Good Luck
Ok, tell me if i correctly understand..
I found the correct rom, after i have to unpack this rom with dutty's good nbh tool..(i have to remove Ipl & Spl?).
After the unpack i have to pack again the rom without ipl and spl and flash it in my Herm??!!is it correct? And in the end i have to change ipl and spl(is it a down grade?).
Last questions yet,
What i have to verify first that i start all this work on my herm to not brick my Herm?
Thank you to all again for the help that you are giving to me
All the best
I may have made it more complicated. That is the process I use.
Best thing to do is simply follow Mrvanx guides.
First downgrade the OS/Radio using THIS GUIDE
Then downgrade SPL/IPL using THIS GUIDE
That is all - as long as you have HardSPL, it is VERY hard to brick your device. So, do that last.
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
zetax said:
Is possible to flash only the rom i need following the guide, and leave my device with the current hardspl ipl and spl?
Thank you
Click to expand...
Click to collapse
Yes. The only reason to remove HardSPL is for warranty. Just for clarification, there is no Hard IPL, only Hard SPL, but I know what you mean.
Basically, 99% of the time most of us flash we are only flashing OS or Radio. SPL and IPL don't change often. Most cooked ROMs are released as OS only.
Ah ok perfect, i'm not interested to the device warranty, because i bought it on ebay from Uk, and there is no warranty on my device, so i can only flash os without ipl and spl..
Thank you very much fo all the help
<< ZX >>
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
zetax said:
Hey boy,
sorry for the up, but i have another question(s)
I have downloaded the rom that i need, but it is in .exe extension how can i extract from this .exe the .nbh file that i will decompile with dutty's???
2nd question, it's possible to downgrade radio rom? i put radio 1.51.00.10 in my device,but i didn't like it, because the 1.47 version
that i had was better of 1.51
Thank you for help
Click to expand...
Click to collapse
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
todd_jg said:
No worries.
To unpack the exe, just use winrar and open it up. You will get a RUU_signed.nbh and an RUU. Just use the nbh file with the custom_ruu.
Yes, you can downgrade radio to 1.47 safely. No worries. I tried 1.51 too - didn't work out for me either. back to 1.50 for me.
Click to expand...
Click to collapse
Todd, thanks very much, i didn't know that with winrar was possible to unpack an .exe file,now i have all i need to flash my device with the hold or the new vodafone uk rom.
Tnx my friend
I have done the flashing, it works perfect.. now i learn the way, i can flash every kind of Os in my tytn following this way?for example o2(Uk) os can be put in my device?
Where here in xda forum can i find the software(for eample the software that shaps have included in his Os) for my device customization?like today home,weather widget, or the automatic operator configurator etc etc?
Tnx todd
I have htc tytn with Swedish spl 2.31 but I want english HOW ???
found arabizer and that worked but then the words werent joined correctly.
so I reset and now its just in Swedish.
HOW *simple way / Can I get it to English ???
Thanks
no one knows _? wtf ?
SUCESS !!
sucess
1. Unlock with hermes unlocker v3 (unlock to superCID)
2. now it can be flashed with any original ROM
br
platinumLA said:
sucess
1. Unlock with hermes unlocker v3 (unlock to superCID)
2. now it can be flashed with any original ROM
br
Click to expand...
Click to collapse
where can i get the roms ?
sandmankeren said:
where can i get the roms ?
Click to expand...
Click to collapse
here http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
Personally, if I was you, Hard SPL your Hermes 1st, before flashing a new rom.
It makes life easier if something goes wrong with the flash. You at least have a chance of recovery. You can find the thread at the top of the upgrading section to download Hard SPL V7.
Cheers...
Hello
I wondered if somebody could post a vid or a guide to do just what the title says. It might be a good idea to know how to install spl on your titan again. It's a request
Thank you
Sincerely,
Tabbii.
If you have SPL 2.6 version you can do:
- downgrade with GoldCard,
or
- install stockROM with SPL 2.5: http://forum.xda-developers.com/showthread.php?p=31586967
Right! Thanks, amigos!