Hi everyone, i have a little problem with my cingular 8125. I am the second owner, so i might not be able to give every details. However, the problem is this: the first owner had wm5 english and decided to put on wm6 italian, so he tried but the wizard brickked. Now, the phone won't turn on, won't go in the bootlader (camera+ power) and won't charge if plugged in the USB. The battery was dead, i charged her but still nothing happens... the wizard act like dead. what can i do? Jtag?
Plz Help!
Thx
If you mean you don't get the charge light then plug it in using the original WALL charger. The charge light should come on after a minute or so. DO NOT press the power button for at least 20 minutes. If this doesn't work then you need a new battery.
Related
Hi,
I have an O2 XDA 1. This morning I noticed the battery was empty so I tried plugging it in to charge. The orange light does not come on and the battery does not charge no matter how long I leave it on. I have tried it both in the cradle and with an adaptor but still nothing happens. I even changed the internal battery but it is still the same.
Any ideas as to what i can do?
Dale.
i have the same problem. can anyone help me with this problem.
thanks b4.
best regard
Charge problems
Hi! i don't know will it halp you or knop. I am not a profi with pda...
but i had the same problems before.
I used car charger. next day battery was almost dead. u put usual charger. not results. u put it through cradle, the same not result.I scared. then i tryed to put car charger,then wall charger,then car charger and wall charger again and it started !!!
i guess the problem is in pda power logic <program didn't switch different power from charger and stop receive a charger in general >
may be u have this problems bc in the wall power were shortly powered down <may be shortly it jump from 220 to 200 voltage>
u can also try to put it to 220 and 120 voltage wall power.
sorry if my english is awful. hope it will help u
Hello Guys..
I've same problem with you guys..
The last day i charge my Wallaby was 2 days ago, and this morning i try to re-charge it with USB but cannot recharge, i try the cradle but it doesn't recharge too.
I think the battery was good because my O2 was powered on and running normal, just cannot re-charge.
I try to remember what i have done before... then.. i remember..
Before i try to recharge, my friend was try to connect his Universal USB Cable for his HP IPAQ (I forget the series) to my Wallaby and his PC detect and try to Synch my Wallaby but the charging indicator doesn't lite.
I Think, Maybe.. something wrong with the electricity, amphere, voltage, or whatever that comes out from his Universal USB Cable.
I have been hard reset and go to boot loader to see the Battery test, but doesn;t help..
Any body can help us??
alitkeren said:
Before i try to recharge, my friend was try to connect his Universal USB Cable for his HP IPAQ (I forget the series) to my Wallaby and his PC detect and try to Synch my Wallaby but the charging indicator doesn't lite.
Click to expand...
Click to collapse
That´s the problem. Ipaq has other Pin layout, so you have damaged something in your device. I´m giessing, that the fuse is blowen away...
Stefan
Oh my..
My Wallaby was physically broken because the shortcircuit, right?
I affraid the money i must to spend to repair will be the same like i buy it (second hand)..
Nothing i can do but go to repair shop, right?
You can try fixing it yourself. You can check if the fuse is not working any more and you can replace it, if you´re kind in soldering....
Stefan
Hello LumpiStefan,
It was a long time no see.
Still use the wallaby with ROM cooked by your ROM Cooker until now.
I just wan to give my credit to you LumpiStefan.
Cheers.
same problem here....
Wallaby charging problem
Hi guys,
I have a charging problem too. I have a wallaby. when i put it onto cradle led turns to amber and then immediately to green. Settings > Power section says the battery full of 100%. But when put off it from cradle, 1 minute later, it goes off. I changed the battery with a new one. still same problem. I also checked two fuses located on both side of the main board. They are OK. No fuses blowned.
So, don't know what to do. it actually works very well but charging problem. I don't want to throw it away. any other external charging device is OK for me.
I need your helps. Thanks.
LumpiStefan said:
You can try fixing it yourself. You can check if the fuse is not working any more and you can replace it, if you´re kind in soldering....
Stefan
Click to expand...
Click to collapse
Hello all. This is my first post.
I've used my Wallaby for many years. Yesterday it doesn't start anymore and if I put it into the cradle no light is displayed.
Last change I did was to replace my GSM SIM card with a UMTS one; since that moment it doesn't work anymore.
You were talking about fuses... Where are they located exactly ? What kind of fuse are they ? How can I check if they're blowned ?
Moreover.. I've a backup of my Wallaby... eventually is there any emulator where I can resume/restore all my contacts ?
Thanks,
Marco
Looking for replacement Wallaby
If anybody is interested, I have a few Wallabys for sale.
May be cheaper than trying to replace broken screens or paying for repairs.
Wallabys for sale
ok i just got this SX56 from a friend. when its on the cradle it says its charging and it will boot up. i see the charging lamp go green, i take it off of the cradle. BOOM dies and it wont turn back on via the power button, soft rest, or hard reset. and i put it back on the cradle and it asks me for the align screen again, like every time i take it off of the cradle and put it back on. it will do some sort of reset and will go back to the align screen. im thinking the battery is shot??? any other ideas please?
could be the battery hasnt been charged properly... try to charge the battery for atleast an hour before you turn on the device.. if it doesnt charge maybe there is something wrong with the battery. cheers
Hi there,
I have a special question to my G4 witch i do not get in operation anymore: The Problem is, that the device does not turn on, independent any keys. Either the ON-Button, Soft-Reset, Hard-Reset i do not get any of the "normal" screens. The display does not light.
Additional, the red power-charge-LED does not light when i plug in the USB-poer-supply. The same, if i disassemble the battery and plug the G4 to the power-supply...
The device has not been used for a couple of months. The last action a Upgrade to WM6.5 that worked definitively fine for a while.
Has anybody an idea? Or happend before?
Thanks in advance
Ernie
i think it`s easy
hey .. i doubt you have a problem with your g4 phone, i think you have a problem with the battery. since you left the batter inside the phone for alot of months and you didn`t use it, i think the battery is super dead, so dead, that the g4 cant power off and go to charge mode. 1 : you could try letting it charge more, like .. 1 hr plugged in , orrr , you could find an universal charger, which charges the battery by touching it`s + and - with it`s pins and putting electricity in it. (sorry for the bad explanation but i`m from romania). I think one of them two should work, if you know some other friend who has a working g4 just try with his battery. Good luck ! ^_^
Thanks for your reply.
But it happens without (!) the battery: If disassemble the battery and connect afterwards the power cable, the red LED does not flash, and no key has a function. As Soft-Reset "switch" and Hard-Reset (2-button on the left plus Soft-Reset-Switch)
First i mentioned the same as you thought...
Has anybody an idea what can be done here?
Thanks in advance.
Ernie
I'm encountering this same problem. I let the device charge over night with no luck. It will not power on at all. The battery was working fine last week. its completely dead
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
exactly the same problem here on touch 3g
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
JeromeMorrow said:
My Universal turn on the red LED for a seconds and after that do not charge and do not turn on. Have you find any solutions?
Thanks
Click to expand...
Click to collapse
oglop said:
i got my touch 3g in Jan 2009 in Shanghai,China. Now i'm in singapore.... it's bricked, i didn't do anything wrong, it's not dropped on the ground or into the water, yesterday it was fine, but this morning i just found that it's power off. plugging in the power cable , and i won't see the orange power led. it's completely dead, soft reset and hard reset can not be initiated, because it refuses to power on.
i'm going to htc care center at harbourFront next weekend ...
Click to expand...
Click to collapse
You’re in the wrong section this is the Wizard forum.
I use a universal charger. Its one which takes the battery not one which plugs into the phone ...
whenever I let my phone run flat I leave the battery in the charger for a couple of hours then put it back in the phone and connect the phone charger. Once there are enough electrons whizzing around in the battery there's enough power to drive the IC that manages the charging in the phone ...
if the battery is too flat it won't even open the gates for you ...
Hi all,
I need an advice from you guys please:
My Topaz is not turning on, it simply does not do anything.
Last time I wanted to change the language but my battery was not fully charged, so in the process it suddenly turned off and since that time I am not able to turn it on, does not display nothing on screen when I press the on button it just vibrates continuously and not stop, and that´s it...
The charging light was on the 1st time I tried, but not the second time.
It is SIM unlocked but not hardspl´ed
Any advice would be great!
Thanks in advance
UPDATE 13-Mar-10
Today, I connected Topaz to wall charger, amber led turned for about 10 sec, then turns of, then vibrates, then nothing again.
I tried to do hard reset, nothing happened, then after some minutes the device is short vibrating every 1 min aprox, no led on, still can´t do nothing more.
EDIT: After 15 min of short vibrating every 1 min, now it´s completely dead again........
Thanks for reading,
Can you put it in bootloader? Is a hardreset possible?
Try to turn the phone off, remove battery, and insert it again. Then hold vol down and press power. Do you get red/green/blue (or whatever) colors?
If you do. let it boot until it says USB (perhaps need to connect usb to PC for it to change from serial to usb) and after that just run the topaz ruu and it should flash.
If you dont get it to start to 3 color screen try and hold up+down and press power.
yes, Vol down and powerbutton. should boot to serial/usb flash screen.
Thanks guys for your reply
Soon as I get home I´ll try and report back
Cheers,
Flash a stock ROM
jmkhenka said:
Try to turn the phone off, remove battery, and insert it again. Then hold vol down and press power. Do you get red/green/blue (or whatever) colors?
If you do. let it boot until it says USB (perhaps need to connect usb to PC for it to change from serial to usb) and after that just run the topaz ruu and it should flash.
If you dont get it to start to 3 color screen try and hold up+down and press power.
Click to expand...
Click to collapse
Hi
Just check that if you try to reflash the ROM whether you should use a stock ROM vs modified ROM as you wrote that you do not have HardSPL on your Topaz.
Once you have successfully reflashed using stock ROM do a hard reset and then install HardSPL 1.83.
Good luck
Aussie
Still need help!!
Ok guys,
Let me explain you what happened:
None of the instructions above worked...
Can´t put on bootloader, hard reset nothing happens
When connected to wall charger amber led is on, if I press power button led turns off and vibrates, then led turns on again but nothing else happens.
Pressed down vol and power = Nothing happens
Pressed up/down vol and power = nothing happens
EDIT: Connected to PC and automatuically installed a qualcomm driver not detected also by WMDC
Disconnected from PC then connected again to wall charger and now amber led not turns on....
Please help!!
Any other advice please!
I really don´t know what else to do
Thanks in advance for taking your time on this thread
Per your PM, I'll certainly help you if I can.
Do you happen to know what caused it to brick? This will help determine how to bring it back. Did you attempt to flash a custom ROM w/o HSPL?
I am not an expert on this but have seen some chefs claim they can bring back a bricked device.
There is a program called MTTY that can usually get your phone to connect to your PC and there are functions to run in that program that can get it to a flashable state so you can reflash your shipped ROM.
Also search the Wiki for restoring bricked device, regardless of the model, it should be the same process. I think I have seen this in the Tilt(Kaiser) forum and maybe in the Fuze (Raphael) forum.
I haven't used this program in a while so I forget the commands but you should be able to find them in a search.
In the meantime I'll do a little research too and see what I can find out.
The main thing we need to accomplish is getting you back into bootloader mode.
1. Here is a link for recovering a Hermes and it has info on mtty.
Thanks a lot Bruce,
I have the original ROM and my Topaz is the unbranded model.
I was just trying to change language but battery was too low, then it turned of and you know the rest of the story.
I have it SIM unlocked but not hardspl´ed and I was not doing any ROM upgrade or so...
I´ll try to use MTTY and find about your recommendations, later report back.
I appreciate a lot your reply!
Cheers,
EDIT: Tested MTTY but in some point says "power on the unit " but that is what I can´t do, nothing happens
Will continue testing and searching...
This is from the Wiki. It may help. Says to use PUTTY instead of MTTY... with instructions.
Another thread on recovering device.
Bruce Inman said:
This is from the Wiki. It may help. Says to use PUTTY instead of MTTY... with instructions.
Another thread on recovering device.
Click to expand...
Click to collapse
Thanks Bruce,
I went through both links but nothing...
The main prob is that I can´t even make it turn on...
Now when wall charger is plugged I do not have the charging led on, so I am really lost...
I do not have another battery to test but I don´t think is that because Topaz is almost new!
But Now I think it´s not charging the battery...
Hope any other idea can save me
If it is almost new try to send it to warranty!if it has the original hspl no prob then!is better then trying to reapair youself, with the cost of loosing warranty!
Good luck with that!!!
Thanks, but I do not have that option
I have high hopes with all the great team of XDA!
first thing first,you have to have power in your phone.....borrow the battery from someone or recharge your battery in somebody else's phone.......then try to go in to bootloader mode (volume button down and power button)..........
komsa said:
first thing first,you have to have power in your phone.....borrow the battery from someone or recharge your battery in somebody else's phone.......then try to go in to bootloader mode (volume button down and power button)..........
Click to expand...
Click to collapse
Yep!
I ordered today another battery
Soon as I get it will report back.
Thanks,
Maybe this will help
It happened to me once. Nothing seemed to work. What did work, I left the phone charging for a day. First take ou the battery for at least a minute. Put it back on. Then connect the wall charger to the phone and let it charge. Hope this will help.
When it happened to me the LED wasn't working either, just connect the charger and let it charge.
Thanks,
I done that yesterday and left it all night but nothing...
I really hope is a battery problem, I´ll find out soon as I receive my new one
wrong place
Exactly samething happened to me.. the only difference was that I was using google maps and connected to my car charger. It somehow didn't charge and ran out of power and kept restarting whenever I tried to charge from a wall-socket.
This is what i did... worked for me.
Take out the battery from the back
Hold down the power button for at least 30 seconds to drain out the static charge.
Take out the sim
Plug in the USB to the phone (without the battery and without the sim)
With the phone connected, press the Red button at the back (soft reset)
Unplug the phone from the charger
Put the battery back in
Connect the USB to charge
Cross your fingers and say a lil prayer
Wait for 30 minutes
Turn it back on.
Lemme know how that goes 4 u
Thanks
I done all your procedure but after this point: [*]Connect the USB to charge
Led charging light did not turned on...
By now my only chance is to test with a new battery (which I will receive on thursday), but I do not have too many hopes as the device is almost new
I´ll report back on friday.
Thanks to all and I will be happy to receive any other suggestion
Hello everyone, first of all thank you for opening this thread.
I have an lg G4 and one day at about 60% of charge just powered off by itself. Cell phone did not fall over nor had any water dropped. I ve been trying to turn it on but with no luck. Now and sometimes after being sat untouched for long period, when I hit the power button a screen comes with a 0% charged battery. However, when I plug it to wall charger, there is no signs of charging. Yesterday I turned it on, and when the screen of 0% charge came up I plug it to my laptop then the phone kept vibrating then died. I tried to factory reset the phone by holding power button for >30 seconds but nothing happened. Please I need help to troubleshoot this problem. Or if someone had the same exact problem or know about it tell me what can be the cause of this problem. Any questions please ask.
Thank you in advance.