I am having trouble cooking NETCF3.5 in. I am using the latest ROM. All I did was clean it out by removing mostly media files and a few apps. When I try to cook NetCF3.5 into the ROM it will not work. I have used OEM packages from Da_G and NATF both with no luck. Is there anything else that needs to be done for NETCF3.5 to work besides copying over the folders?
Thanks in advance!
The package maybe setup for a certain files and I think deleting it will cause error.
I have not problem with CF3.5 building using Da_G Kitchen.
At0mAng said:
I am having trouble cooking NETCF3.5 in. I am using the latest ROM. All I did was clean it out by removing mostly media files and a few apps. When I try to cook NetCF3.5 into the ROM it will not work. I have used OEM packages from Da_G and NATF both with no luck. Is there anything else that needs to be done for NETCF3.5 to work besides copying over the folders?
Thanks in advance!
Click to expand...
Click to collapse
You are removing netcf 2.0 correct?
aruppenthal said:
You are removing netcf 2.0 correct?
Click to expand...
Click to collapse
I believe I removed it during my testing Should it be removed?
Edit
I got it working...just created my own package and now for some reason it is working.
Thanks.
At0mAng said:
I believe I removed it during my testing Should it be removed?
Edit
I got it working...just created my own package and now for some reason it is working.
Thanks.
Click to expand...
Click to collapse
Yes 3.5 is backwards compatible with all older netcf. Make sure you remove 2.0. Look in sys and make sure there is no folder named "netcf". Then add your netcf 3.5 to sys.
DSM files process in order so if your netcf comes after netcf 3.5 you will overwrite some of 3.5 thus making it work incorrectly.
I also recommend adding netcf messages as well.
If you have any more issues send me a PM and ill upload both for you when I get home from work.
EDIT: Awesome
Thanks for the help. I may not removed NetCF2. New at this and learing netcf messages is in there as well.
Guys,
I think I also having problem with NetCF, not sure what went wrong.
Diamond TF3D Config is not running in my ROM but Diamond Tweak and AdvancedConfig which I believe also depend on NetCF are working.
Any advise? I'm using Da_G's kitchen btw.
Cheers!
vibranze said:
Guys,
I think I also having problem with NetCF, not sure what went wrong.
Diamond TF3D Config is not running in my ROM but Diamond Tweak and AdvancedConfig which I believe also depend on NetCF are working.
Any advise? I'm using Da_G's kitchen btw.
Cheers!
Click to expand...
Click to collapse
Sounds like a package error then. Are you using a premade package or did you make your own?
If I use normal kitchen, eg. juggler, etc then everything's fine but using Da_G's kitchen I had problem with Diamond TF3D Config.
I tried a lot of NetCF OEM packages, as well as created my own. Now trying yours, the one in Tilt's OEM packages Report back later.
V
aruppenthal said:
Sounds like a package error then. Are you using a premade package or did you make your own?
Click to expand...
Click to collapse
vibranze said:
If I use normal kitchen, eg. juggler, etc then everything's fine but using Da_G's kitchen I had problem with Diamond TF3D Config.
I tried a lot of NetCF OEM packages, as well as created my own. Now trying yours, the one in Tilt's OEM packages Report back later.
V
Click to expand...
Click to collapse
I have found that some NetCF3.5 are giving errors with different programs. I have not tried my package I made with Diamond Config but will try. If it works you are more than welcome to have my package.
Edit
Well Diamond Config is working with my NetCF3.5. You can get it here http://www.4shared.com/file/87085992/700bfd57/NETCF35.html
Make sure you delete all NetCF folders and place this in the SYS folder.
Good luck
Thanks At0mAng,
Are you using Da_G's kitchen to cook your ROM? If yes, should I delete all the NetCF packages under PACKAGES folder, even I unticked them during BuildOS package selection?
Cheers,
V
vibranze said:
Thanks At0mAng,
Are you using Da_G's kitchen to cook your ROM? If yes, should I delete all the NetCF packages under PACKAGES folder, even I unticked them during BuildOS package selection?
Cheers,
V
Click to expand...
Click to collapse
No I am using a different Kitchen. Unchecking them should be fine and place the NetCF35 folder into the sys folder. Did you have both NetCF2 and NetCF3.5 clicked when building your ROM? As I found out having both cooked is not good.
Hi At0mAng,
Same result I tried both NetCF2 alone and NetCF2 with NetCF3.5 with same result. I think it's something to do with the kitchen.
Will try to use Juggler's kitchen and report back.
Cheers!
At0mAng said:
No I am using a different Kitchen. Unchecking them should be fine and place the NetCF35 folder into the sys folder. Did you have both NetCF2 and NetCF3.5 clicked when building your ROM? As I found out having both cooked is not good.
Click to expand...
Click to collapse
@At0mAng @aruppenthal,
I started from afresh, using the Da_G's kitchen, took only NetCF3.5 and other apps to the minimum and Diamond TF3D still gave me the error. I attached the screenshot here for reference in case some of you know the root cause. Thanks.
V
vibranze said:
@At0mAng @aruppenthal,
I started from afresh, using the Da_G's kitchen, took only NetCF3.5 and other apps to the minimum and Diamond TF3D still gave me the error. I attached the screenshot here for reference in case some of you know the root cause. Thanks.
V
Click to expand...
Click to collapse
Your netcf 35 is not working. You need to put netcf 35 in sys not in packages. Make sure there is not a folder called netcf in sys. That is 2.0 you dont want that. My guess is you also need a new tf3d package.
Hi Aruppenthal & At0mAng
Finally Diamond TF3D Config is working Thanks for your help.
Kindly refer to DaG's kitchen thread for reference
V
Related
This may seem like a ridiculous question but - where can I find the Java Embedded Application CAB or is there a better solution out there?
Also, In WM 6.1 do you not need to have the task manager at the top right like on the Sprint TOUCH Model. I own both.
DCD! Excellent Clean ROM!!! Thanks!!!
Get to install what I need and only what I need...
(Now I just have to find it! )
Thanks!
AzureDigitalMedia said:
This may seem like a ridiculous question but - where can I find the Java Embedded Application CAB or is there a better solution out there?
Also, In WM 6.1 do you not need to have the task manager at the top right like on the Sprint TOUCH Model. I own both.
DCD! Excellent Clean ROM!!! Thanks!!!
Get to install what I need and only what I need...
(Now I just have to find it! )
Thanks!
Click to expand...
Click to collapse
Here is DCD1182's java link http://forum.xda-developers.com/attachment.php?attachmentid=69138&d=1202246179
TaskManager stopped working for me. I am using wktask
http://www.freewarepocketpc.net/ppc-download-wktask-v1-1-7-3b.html
DCD's Java is Jeodek which isn't as good as JBed. I mentioned he should rename the cab in a thread but I'm not sure if he noticed it.
You can get the latest Esmertec JBed here:
http://forum.ppcgeeks.com/showpost.php?p=176854&postcount=10
Task Manager can be found here:
http://www.dotfred.net/TaskMgr.htm
Task Manager works perfectly for me.
jrebeiro said:
DCD's Java is Jeodek which isn't as good as JBed. I mentioned he should rename the cab in a thread but I'm not sure if he noticed it.
You can get the latest Esmertec JBed here:
http://forum.ppcgeeks.com/showpost.php?p=176854&postcount=10
Task Manager can be found here:
http://www.dotfred.net/TaskMgr.htm
Task Manager works perfectly for me.
Click to expand...
Click to collapse
ya Esmertec JBed is awesome
jrebeiro said:
DCD's Java is Jeodek which isn't as good as JBed. I mentioned he should rename the cab in a thread but I'm not sure if he noticed it.
You can get the latest Esmertec JBed here:
http://forum.ppcgeeks.com/showpost.php?p=176854&postcount=10
Task Manager can be found here:
http://www.dotfred.net/TaskMgr.htm
Task Manager works perfectly for me.
Click to expand...
Click to collapse
jrebeiro is correct. I thought this was the Esmertec Jbed, oops. The Esmertec is better and his link is the newest one I believe.
AzureDigitalMedia is talking about the HTC taskmanager that lets you close out the programs from the right top corner. wktask works almost like the HTC Task Manager
i am still using x-button, cause task manager would not close certain apps for me (comm mgr). Hopefully you find a solution.
dwertz - That's absolutely correct - thats the one I am looking for... does it exist in CAB form somewhere... and Thanks to everyone who replied...
AzureDigitalMedia said:
dwertz - That's absolutely correct - thats the one I am looking for... does it exist in CAB form somewhere... and Thanks to everyone who replied...
Click to expand...
Click to collapse
Here it is
jrebeiro said:
DCD's Java is Jeodek which isn't as good as JBed. I mentioned he should rename the cab in a thread but I'm not sure if he noticed it.
You can get the latest Esmertec JBed here:
http://forum.ppcgeeks.com/showpost.php?p=176854&postcount=10
Task Manager can be found here:
http://www.dotfred.net/TaskMgr.htm
Task Manager works perfectly for me.
Click to expand...
Click to collapse
With ppcgeeks temp down, anywhere else to get the Esmertec JBed?
Esmertec Jbed @ Rapidshare
Up'd it to Rapidshare.
muchos gracias
Thanks Everyone!!
[Kitchen]26-Jun update [WM 6.1 / WM6.5 "21806""21820"] Visual Topaz Kitchens
Dears,
We know that, the best tool used for cooking and extracting up to now is ervuis and bepe tool.
So here we go with this kitchen which is ready to use for Topaz.
Rom: 1.39.405 (you can easily extract any official rom and directly use it)
Tool reference: http://forum.xda-developers.com/showthread.php?t=469420
Some of instructions in using this kitchen:
http://forum.xda-developers.com/showthread.php?t=471288
http://wiki.xda-developers.com/index.php?pagename=Da_G%27s%20Simple%20ROM%20Kitchen
Download links:
WM6.5 Kitchen:
http://rapidshare.com/files/244850680/Topaz_Kitchen_ervius_bepe6.5.7z
or
http://giesecke.tk:8090/privat/topa...ens/&download=Topaz_Kitchen_ervius_bepe6.5.7z (thanks BeeGee_Tokyo)
WM6.1 Kitchen:
http://giesecke.tk:8090/privat/topa...chens/&download=Topaz_Kitchen_ervius_bepe.rar (thanks BeeGee_Tokyo)
Don't forget to thank ervius and bepe for their great effort on this great tools.
((READY TO USE))
Have a nice cook .
Screenshot from ervius thread:
26-Jun Update:
new kitchen with:
- 21820 base rom
- 2.01 OEM (native nk.exe "thanks Da_G and tom_codon")
- 1.3 ervius tools
- some of good packages
Download links:
http://rapidshare.com/files/248659769/Topaz_21815_Kitchen.7z
((note that the 7z file called 21815 while inside the kitchen you will find 21820))
Enjoy
Which build of 6.5? That would be handy to know..
Any more tweakers/addons to this kitchen?
Mr_Q said:
Which build of 6.5? That would be handy to know..
Any more tweakers/addons to this kitchen?
Click to expand...
Click to collapse
21806
We will update the kitchen with the newer builds.
ماشاء الله عليك اخي
زي النحلة لا تكل ولا تمل
its right said:
21806
We will update the kitchen with the newer builds.
Click to expand...
Click to collapse
Looking at the SYS, I have a sneaking suspicion it won't boot...
l3v5y said:
Looking at the SYS, I have a sneaking suspicion it won't boot...
Click to expand...
Click to collapse
already cooked on my device right now, I'm combining the packages to release a rom .
l3v5y said:
Looking at the SYS, I have a sneaking suspicion it won't boot...
Click to expand...
Click to collapse
I cooked one with this kitchen and the rom works well.
I thought that it won't boot up, but did it.
Many thanks for "its right" to share this Kitchen. http://forum.xda-developers.com/member.php?u=221977
l3v5y said:
Looking at the SYS, I have a sneaking suspicion it won't boot...
Click to expand...
Click to collapse
It is the kitchen and base of my rom, which I can say does work well every time iv'e built it using this kitchen.
Thanks for uploading this!
avers said:
I cooked one with this kitchen and the rom works well.
I thought that it won't boot up, but did it.
Many thanks for "its right" to share this Kitchen. http://forum.xda-developers.com/member.php?u=221977
Click to expand...
Click to collapse
shadowline said:
It is the kitchen and base of my rom, which I can say does work well every time iv'e built it using this kitchen.
Thanks for uploading this!
Click to expand...
Click to collapse
Its right has worked some magic on it!
aha,so good,Thank you!
mirror link dir=Kitchens%2F&download=Topaz_Kitchen_ervius_bepe6.5.7z"]here
Thanks everyone.
BeeGee_Tokyo said:
mirror link here
Click to expand...
Click to collapse
Bro, this kitchen in this thread isn't the same as the one I gave you the link to upload .
I hope you delete the download link to avoid confusing.
Many thanks.
BeeGee_Tokyo said:
mirror link here
Click to expand...
Click to collapse
Thanks for the mirrors
the thread now contains WM6.1 & WM6.5 kitchens
Enjoy
very good, what build for wm6.1?
roney said:
very good, what build for wm6.1?
Click to expand...
Click to collapse
21042 or 21048 I'm not sure.
Anyway, you can dump any official build from Topaz or Rhodium or whatever , very easy with these tools , give it a try
I wonder where i can get a rhodium dump though or a later WM 6.1 build?
I found a Topaz rom with build 21051 but the build in this one is a previous build. I want to build my own rom with TouchFlo and manila from the rhodium (Touch Pro 2) combined with the other software from the Topaz. This in both Dutch and WWE... the current rom i have atm does all that i describe, but the battery is getting drained like hell... :|
sn0x0r said:
I wonder where i can get a rhodium dump though or a later WM 6.1 build?
I found a Topaz rom with build 21051 but the build in this one is a previous build. I want to build my own rom with TouchFlo and manila from the rhodium (Touch Pro 2) combined with the other software from the Topaz. This in both Dutch and WWE... the current rom i have atm does all that i describe, but the battery is getting drained like hell... :|
Click to expand...
Click to collapse
What ROM is it? It may be that LZX compression affects the battery life...
thanx bro for these thread
This is the my first time when i use ervius and bepe kitchen and I have some Questions ?
1- the name of reg files come with (app.reg) and I have tweaks come with name (reg) how can chang it to work in my rom ??
2-I want to add cabs to work with AUTORUN and I put it in (config.txt) , (config_AP.txt),(config_end.txt) and (config_operator.txt) But always gives me errors ??
thanx
l3v5y said:
What ROM is it? It may be that LZX compression affects the battery life...
Click to expand...
Click to collapse
That was:
udK Topaz R1 - Build 21051.1.6.4 - Manila 2.1 Landscape - base v1.40
The rom itself was awesome, good build, rhodium features, the works. But my battery didn't last long on that rom and wasn't really feeling like working out the reason for the problem.
sn0x0r said:
That was:
udK Topaz R1 - Build 21051.1.6.4 - Manila 2.1 Landscape - base v1.40
The rom itself was awesome, good build, rhodium features, the works. But my battery didn't last long on that rom and wasn't really feeling like working out the reason for the problem.
Click to expand...
Click to collapse
Sounds like LZX messing things up...
I think udk was going to release a non LZX compressed ROM...
Hi, someone can port to VGA the new Phone Canvas extracted from last Tachi 1.28 rom?
I hope it is more fast and light than previous one.
Here the 3 packages to port
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
Is there anybody.... out there?
cubetto said:
Hi, someone can port to VGA the new Phone Canvas extracted from last TAchi 1.28 rom?
I hope it is more fast and light than previous one.
Here the 3 packages to port
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
Click to expand...
Click to collapse
If I am to say, Tachi Phone Canvas has always been the slowest one... But it has an advantage that it doesn't need phcanvga.exe to work. So, what we need is not porting it, but removing the dual SIM support. So please change the title, because those who know to port Phone Canvases may not know how to work on this.
as far as i have read the slot manager does all the dual SIM stuff
so that needs to be modified....
so why dont you try to cook phone_Canvas_Enhancement_4_1_50020152823_0 and PhoneCanvas_5_27_0_0 from your source and use the ported slot manager from earlier port
sheennick123456 said:
as far as i have read the slot manager does all the dual SIM stuff
so that needs to be modified....
so why dont you try to cook phone_Canvas_Enhancement_4_1_50020152823_0 and PhoneCanvas_5_27_0_0 from your source and use the ported slot manager from earlier port
Click to expand...
Click to collapse
And about languages? I cook in Italian (0410) while packages are in 0804 (chinese?). Can I use localization files from older Tachi Phonecanvas version?
sheennick123456 said:
as far as i have read the slot manager does all the dual SIM stuff
so that needs to be modified....
so why dont you try to cook phone_Canvas_Enhancement_4_1_50020152823_0 and PhoneCanvas_5_27_0_0 from your source and use the ported slot manager from earlier port
Click to expand...
Click to collapse
Well, I once did that in an older version, but it didn't work, so I don't think it will work, but at least you can try.
I have tried to cook a rom with the packages on first post. Results are:
- incoming call works perfect,
- outgoing call don't works: phone shows always the message "phone is off. Turn on?" but nothing happens.
- keybord dialer is cutted
Slotmanager problem surely.
Some screenshots
i tried to mix up some new and old files and it resulted in a "shifted down" keypad (like it was WVGA). but at least it didn't say "phone is off". will investigate more this evening.
btw, does nobody know what was exactly edited on previous tachi dialer version to work on diamond?
etoy said:
i tried to mix up some new and old files and it resulted in a "shifted down" keypad (like it was WVGA). but at least it didn't say "phone is off". will investigate more this evening.
btw, does nobody know what was exactly edited on previous tachi dialer version to work on diamond?
Click to expand...
Click to collapse
Slot Manager
so phone canvas and phone canvas enhancement packages weren't touched at all? the app.reg on those two are way different too..
etoy said:
so phone canvas and phone canvas enhancement packages weren't touched at all? the app.reg on those two are way different too..
Click to expand...
Click to collapse
No. They can be different, because the Tachi Phone Canvas port here on XDA not only removed dual SIM check but also modified the Phone Canvas layout and many other thing.
cubetto,i think your packages on first page are corrupted..many files are missing inside
edit:
i don't know what every dll does so i tried to overwrite each one just to see what happens.
PhoneCanvas_5_27_0_0 package:
phonecanvas.dll --> can be overwritten without problems,the dialer still works properly. that's good i think?
Phone_Canvas_Enhancement_4_1_50020152823_0
DPadMenu.dll ok (??)
phcanImages.dll ok (graphics file)
phcanOverbmp.dll ok (graphics file)
ContactAssistDll.dll --> tachi dialer does not show,MS dialer instead
phcanrc.dll --> dialpad is shifted down..looks like it was WVGA. i can barely see the "call" button. videocall switch is present??? calls still work
etoy said:
cubetto,i think your packages on first page are corrupted..many files are missing inside
edit:
i don't know what every dll does so i tried to overwrite each one just to see what happens.
PhoneCanvas_5_27_0_0 package:
phonecanvas.dll --> can be overwritten without problems,the dialer still works properly. that's good i think?
Phone_Canvas_Enhancement_4_1_50020152823_0
DPadMenu.dll ok (??)
phcanImages.dll ok (graphics file)
phcanOverbmp.dll ok (graphics file)
ContactAssistDll.dll --> tachi dialer does not show,MS dialer instead
phcanrc.dll --> dialpad is shifted down..looks like it was WVGA. i can barely see the "call" button. videocall switch is present??? calls still work
Click to expand...
Click to collapse
I guess he didn't miss any files, and porting doesn't rely on these dlls, it's related to Slot Manager. You may try to overwrite SlotMgrInterface.dll, SlotMgrService.dll and SlotManager.exe.
etoy said:
cubetto,i think your packages on first page are corrupted..many files are missing inside
edit:
i don't know what every dll does so i tried to overwrite each one just to see what happens.
PhoneCanvas_5_27_0_0 package:
phonecanvas.dll --> can be overwritten without problems,the dialer still works properly. that's good i think?
Phone_Canvas_Enhancement_4_1_50020152823_0
DPadMenu.dll ok (??)
phcanImages.dll ok (graphics file)
phcanOverbmp.dll ok (graphics file)
ContactAssistDll.dll --> tachi dialer does not show,MS dialer instead
phcanrc.dll --> dialpad is shifted down..looks like it was WVGA. i can barely see the "call" button. videocall switch is present??? calls still work
Click to expand...
Click to collapse
I don't know it. I'll try to extract packages again from tachi 1.28 rom and add it on megaupload
cubetto said:
I don't know it. I'll try to extract packages again from tachi 1.28 rom and add it on megaupload
Click to expand...
Click to collapse
here's the right untouched packages dumped from tachi 1.28 rom. in yours some files were missing. feel free to link the attachment to first page,where i hope it's more useful than here
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
etoy said:
here's the right untouched packages dumped from tachi 1.28 rom. in yours some files were missing. feel free to link the attachment to first page,where i hope it's more useful than here
Phone_Canvas_Enhancement_4_1_50020152823_0
PhoneCanvas_5_27_0_0
Slot_Manager_1_1_2015_3731
Click to expand...
Click to collapse
Ok, done.
Thx
I've tried today with fresh extracted package but no luck.
Did you make any outgoing call?
Reward offer
1 Million to port it
lol i did some random testing but didn't make it work with outgoing calls and the layout was misplaced. would be interesting to know what exactly mikeknoop edited in previous version.
etoy said:
lol i did some random testing but didn't make it work with outgoing calls and the layout was misplaced. would be interesting to know what exactly mikeknoop edited in previous version.
Click to expand...
Click to collapse
Perhaps this post will help : http://forum.xda-developers.com/showpost.php?p=3874376&postcount=526
Captain_Throwback said:
Perhaps this post will help : http://forum.xda-developers.com/showpost.php?p=3874376&postcount=526
Click to expand...
Click to collapse
Thanks Captain, I've tried to hex edit the suggested file searching the same strings on file, but no success, I can't make any call, only receive works.
I think it is necessary a real chef, not me.
Thanks again
I have about 7 programs that i use on all new roms is there something like this http://forum.xda-developers.com/showthread.php?t=366333 but is a lot simpler to use that can just auto install programs after the flash?
Thanks
Create "Autoinstall" folder on your SD card and put the cabs in it. After you flash the ROM it should automaticlly install all the cabs, but the chef needs to integrate this function in the ROM.
Cheers!
XenSA said:
I have about 7 programs that i use on all new roms is there something like this http://forum.xda-developers.com/showthread.php?t=366333 but is a lot simpler to use that can just auto install programs after the flash?
Thanks
Click to expand...
Click to collapse
Look for XDA_UC. Moreover, you can try NRGZ ROMs. They have XDA_UC included as well as his own settings exporter and it works fabulously well.
nicedude_abad said:
Look for XDA_UC. Moreover, you can try NRGZ ROMs. They have XDA_UC included as well as his own settings exporter and it works fabulously well.
Click to expand...
Click to collapse
+1 Ditto ....
Hi all, I decided to upload my own kitchen for the Raphael. As all the existing downloadable kitchens i've seen for our devices are still Ervius's kitchen, i thought i'd add the latest ondRasters/airxtreme's AMAZING NEW kitchen to the mix. Its the latest (as of now) OsKitchen Zero v1.31RC2 loaded with WM6.5 build 24620 and the Manila VGA port 2016 - This kitchen has ONLY WWE files included as thats what i cook but you can easily add other languages for new builds. It has many apps included and tweaks.
I would firstly like to Thank SilentP - he very kindly shared his kitchen with me and without his help i'd still be struggling with cooking Manila (sooo many files!!!) - you'll still see some of his files in my new osKitchen. Thanks to airxtreme and ondRaster for their excellent work on osKitchen. Programatix for all his work with Manila 2016 VGA port and all who worked on it including mkucuksari, ted973, Madnish30. All who's apps i have included and tweaks i have used. And obviously a HUGE thanks to all at XDA-DEV/mobileunderground/DFT/Boomer/mwang and all who contribute.
If i have included your work/mod/app etc in my kitchen and haven't mentioned your name then please let me know and i will add you to the list immediately and please accept my apologies in advance.
You can find the latest info and updates for osKitchen by airxtreme here: http://forum.xda-developers.com/showthread.php?t=628948
For ondRasters original osKitchen thread see here: http://forum.xda-developers.com/showthread.php?t=581715
I have uploaded the files to MultiUpload so there are plenty of mirrors:
http://www.multiupload.com/9C9D1N1VCK
http://www.multiupload.com/FKP6A872ZY
http://www.multiupload.com/CPOUOW2ZQ0
WARNING: This kitchen is setup for GSM TP's ONLY - if you have a CDMA TP then you will have to import an original CDMA TP ROM from HTC first - DO NOT FLASH A GSM ROM TO YOUR CDMA DEVICE.
If you have trouble extracting the files then please download the latest version of 7zip here: http://www.7-zip.org/
If i add/change anything on my own kitchen in the future then i will upload the change here so you can add it to your own kitchen if you want. Its worth keeping an eye on airxtreme's osKitchen page as well because he is continually updating it and adding new features etc - osKitchen....The best kitchen available!!!
If you find i have left any of my own personal data in then please let me know and i'll remove it.
Also if i can be of any help then please let me know
Secc
UPDATED KITCHEN: 20/02/2011.
I have uploaded my newer kitchen now with Manila/Sense 2019 and WM build 28244 included. There are 3 x 80mb files and 1 x 32mb files to download.
As always if i have left any personal information in it by mistake then please let me know and delete it, Thanks.
http://www.multiupload.com/ZRU27JDZJM
http://www.multiupload.com/IQEBC7WJUO
http://www.multiupload.com/R6HQAKUXJE
http://www.multiupload.com/BFGGXIW66A
Thanks
you have done a good job, I was trying to import VK Kitchen to OSZ but not successful, am downloading now and will produce my own rom for my
FUZE
Thanks again
yasirriaz1977 said:
you have done a good job, I was trying to import VK Kitchen to OSZ but not successful, am downloading now and will produce my own rom for my
FUZE
Thanks again
Click to expand...
Click to collapse
Hey yasirriaz1977, Hope you enjoy. It has a WM6.5 NK incl so no need to recmod anything. Its stripped down to 0409 (ENGLISH) as thats all i use but you can add other languages if you need to.
Secc
Thanks, now I get to play.
21xxx branch
Hi. Would it be possible to include some classic 6.5 build i.e. 21911 (with win icon in the upper left screen corner)? Unfortunately 6.5.5 builds cause graphics distortion in many apps, so plenty of users (like myself) prefer to use older branches...
rabinhood said:
Hi. Would it be possible to include some classic 6.5 build i.e. 21911 (with win icon in the upper left screen corner)? Unfortunately 6.5.5 builds cause graphics distortion in many apps, so plenty of users (like myself) prefer to use older branches...
Click to expand...
Click to collapse
Hey rabinhood, Its so easy to import new builds with osKitchen. Just download the build number you want from DFT or Chef central then use the import tool. The more builds i add, the bigger the upload which is why i stripped out all the other builds - i don't use COM2 branch.
Secc
There is a problem in the files , it is not able for extracting or repairing
FYI: Downloaded from all available servers and same problem
zinzar said:
There is a problem in the files , it is not able for extracting or repairing
FYI: Downloaded from all available servers and same problem
Click to expand...
Click to collapse
Confirm, there is error in the files....
joining them with HJsplit and using winrar to extract worked fine for me!! no problems with extraction...
Thanks Secc for all your work!
zinzar said:
There is a problem in the files , it is not able for extracting or repairing
FYI: Downloaded from all available servers and same problem
Click to expand...
Click to collapse
Hey zinzar and try, I downloaded the files today and all of them extracted out fine. Make sure you have the latest version of 7zip as that is what i used to compress the files.
Secc
Thanks for the files, I can confirm they extract fine, look forward to craeting my own ROM .
secc123 said:
Hey yasirriaz1977, Hope you enjoy. It has a WM6.5 NK incl so no need to recmod anything. Its stripped down to 0409 (ENGLISH) as thats all i use but you can add other languages if you need to.
Secc
Click to expand...
Click to collapse
hay secc I am noob in cooking, I previously Wizard and try to cook roms for it, but just only raw 6.5, and when I tried to include tweaks to it, I always failed to make it stable anymore....
can u help me out.... if I can ask you some questios in PM or direct chat, cause I'm very very keen to learn MOD the windows for my Fuze
Tanks in advance
Thank you
secc123 said:
Hey zinzar and try, I downloaded the files today and all of them extracted out fine. Make sure you have the latest version of 7zip as that is what i used to compress the files.
Secc
Click to expand...
Click to collapse
First I forget to tell you , Thank you for your kitchen
Second , I'm still have the extracting problem after download the last 7z version , now i'm downloading all files again and we will see
Hey zinzar, maybe your Antivirus app is getting in the way of the extraction. There is a file inside the kitchen (osnbtool) that my AV app doesn't like (Norton IS 2010). What i do when i download a kitchen is firstly disable the antivirus app and download the file(s). Then i extract out the kitchen to where i want it then add that dir to the 'ignore' list in NIS - this way NIS won't keep removing osnbtool.
The files are fine.
Secc
I will come back to you with the result
now let is talk about your work , please try to import Cracing open source files to your kitchen , his rom was like magic ( fast and stable ).
Thanks for ur fast response
zinzar said:
I will come back to you with the result
now let is talk about your work , please try to import Cracing open source files to your kitchen , his rom was like magic ( fast and stable ).
Thanks for ur fast response
Click to expand...
Click to collapse
Hey zinzar, I don't cook WM6.1 and have never bothered with the 20***/21*** branches, i like the new GUI with COM3/5 builds but if you want to add it to your kitchen then it should be a simple import process. airxtreme has made importing new builds etc very easy with this kitchen.
As a general rule COM2 (21***/20***) builds are classed as 'fast and stable' and up until a few months back i would have agreed but with our devices having enough free RAM i see no reason not to have the latest GUI and feature (threaded email etc).
My old ervius kitchen had lots of builds and different versions of apps/tweaks etc in but was HUUUUUUGE and VERY MESSY!!! This is why i started to use osKitchen. I wanted to remove all the old tweaks that don't work with Manila 2016 etc and ONLY leave the newest versions of apps and tweaks that i use - this way i have a nice clean easy to use kitchen, which i thought i would share.
Let me know if you still have trouble extracting out the files.
Secc
secc123 said:
Hey zinzar and try, I downloaded the files today and all of them extracted out fine. Make sure you have the latest version of 7zip as that is what i used to compress the files.
Secc
Click to expand...
Click to collapse
I am using 7zip 9.10 beta. I will try to re-download from other resources. Thank you for the kitchen... Redownload using zshare, manage to unzip... thanks again...
try said:
I am using 7zip 9.10 beta. I will try to re-download from other resources. Thank you for the kitchen...
Click to expand...
Click to collapse
Hey try, i have just checked my version of 7zip - its version 9.15beta so if your version still doesn't work then grab a newer version here: http://www.7-zip.org/
Secc
secc123 said:
Hey try, i have just checked my version of 7zip - its version 9.15beta so if your version still doesn't work then grab a newer version here: http://www.7-zip.org/
Secc
Click to expand...
Click to collapse
I re-download the whole kitchen using zshare and manage to unzip it using 9.10beta. Definitely will update to 9.15beta now. Thanks again for your kitchen...
try said:
I re-download the whole kitchen using zshare and manage to unzip it using 9.10beta. Definitely will update to 9.15beta now. Thanks again for your kitchen...
Click to expand...
Click to collapse
Hey try, I'm so glad you managed to extract out the kitchen successfully. I hope you enjoy it and if you have any problems then let me know. Enjoy.
Secc