Massive thanks to jerpelea (wouldn't have gotten anywhere close without him).
I'm back! This new version is based on the fantastic Insomnia NIKI Kitchen, using WM6.5 Build 21500 and OEM Iolite/mishmash. As I made this version for my personal use, it is FULL of applications - if you don't like applications installed from the start, don't download it!
Warning: This ROM is for testing only and has been prepared by a complete cooking noob (me). I cannot guarantee any results for you or your phone and this may end up screwing things up COMPLETELY . Install at your own risk.
Having said that, it works very well on my NEON200 (Touch Dual 850), much better than any other ROM I have tried and even better than the old 6.1 version.
Make sure you have installed the Neon Hardspl (thanks Olipro) before you even remotely consider installing this.
Known Issues:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
- The camera hardware button does not work
- The camera autofocus doesn't work properly (messed up the some of the files I copied I think) so it takes a few seconds to shoot.
- Hardware keyboard doesn't work properly. It thinks that it is a 16key version.
Anyway, give it a go if you are game and let me know how it goes. It is a hundred times more finger friendly than the WM6.1 ROMs (which is the whole point of the touch phones).
I only do this in my *very* spare time, so I'm sorry in advance if I don't update often. I can say that I am very happy with the ROM as it is (never use the keyboard or camera), so it may be quite while before I update.
Download the new WM6.5 ROM here.
Old version (WM6.1 Build 21109) can be downloaded here if you want it for some reason.
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
ajb303 said:
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
Click to expand...
Click to collapse
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
maximus007 said:
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
Click to expand...
Click to collapse
I was just about to edit my post Keyboard does not work at any time. Also when recieving a voicemail, i tap and trys to connect. But says that phone call cannot be made at this time.
I've had no issues with voicemail...
Have you tried installing the latest Ezinput from the first post? Do you have 20-key device?
Perhapsthe Voicemailis something i need to set up with T-mobile.Yep, got the touch keyboard working with the install No keypad though.
Edit: Yes, camera button does not work.
I'm gonna load it up now and give it a shot.
I can't find the SIP task in task manager to kill it before installing the .cab.
Also can't get online because it is configured for Telestra (I imagine I can fix that easily). The "Setup Connection" app in settings closes immediately. That is how I used to setup my internet/phone provider stuffs.
Edits.
Ok...oddly enough after I updated my internet settings the 'task manager' and a few other apps showed up. That allowed me to kill the SIP and load the keyboard.
Overall this ROM is fast! Very happy with it so far. Can't wait till it is finished.
PS - I can't use my hardware keyboard either. Even with the SIP update. On screen works perfect.
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
I haven't found a packaged default ROM. You might wanna see if he releases one once he gets this build worked out. I would love to get a copy of your default rom before you upgrade it. I think I lost mine 2 laptops ago. Once you load the HardSPL you can go back, however you need the default ROM to do so. There isn't a backup / restore utility as far as I know.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
wait! haha, before you do can you dump your stock rom? That would be very useful
I'm new to this site. How do I get my ROM backup?
mafirst said:
I'm new to this site. How do I get my ROM backup?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2254400&postcount=7
Let me know if you need help with this.
Voice Mail (T-Mobile)
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
big papa rich said:
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
Click to expand...
Click to collapse
Interesting, I didn't know that. I thought it was just an issue I had to call t-mobile about. Thanks
SMS
I have een having issues with SMS. When I try to send a text, I get an error message saying that my message can not be sent, that I need to subscribe to the service. I flashed back to Seths V2 rom and every thing worked fine. Any ideas?
BTW, don't know if any one needs it, but here is a cab that works great for reconfiguring internet stuff for T-Mobile or AT&T
I Just found this link. Says it is for the Neon 200 US, but my device still says 300. Any how, looks exactly like the Ship Rom as I remember it.
http://forum.xda-developers.com/showthread.php?t=395384
maximus007 said:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
Click to expand...
Click to collapse
You can change it by editing:
1) Modelname.txt in OEM/OperatorPkg
2) nbhgen.txt in Tools/Htools
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
maximus007 said:
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
Click to expand...
Click to collapse
Change the name in modelname.txt in oem/operatorpkg
Also change mixupdate_oemversion_100.provxml in same folder.
os.nb.payload content will get overwritten when the ROM is built.
Thanks for mixupdate_oemversion_100.provxml - that has the version info in it (also edited easily via registry). It was missing from my kitchen.
modelname.txt simply has "Touch Dual" (which is OK) in it. That file doesn't let me change NIKI100 to NEON200.
If you check my .nbh in a hex editor it displays "NEON200", yet upon flashing it still displays the device as NIKI100...
Related
USE AT YOUR OWN RISK.
Feb 3 update
http://rapidshare.com/files/88929555/RUU_signed.zip.html
I cooked this for myself, because with other roms i was missing voicemail notifications. I am using it right now and seems like its very good and stable. So i would like to share it with the community.
It includes most of the telus customizations ( yes its has ugly purple windows theme too)
scroll down for the link
Details:
Base Rom Version is : 3.15.651.0
CE OS 5.2.1622 ( Build 18128.0.4.4)
GPS registry settings are taken from dcd's 2.0 Sprint beta
It includes most of the stock stuff eg. windows live, office etc.
third party packages included are
Cloudyfa EsmertecJbed java.
Opera mini and Gmail midlets with proper shortcuts and no data access warnings, so be warned they wont ask you when it will acess data.
Finger friendly friends
Task manager
VistaHide battery Gauge
At first boot when telus customization run ppst.exe takes little longer, its makes you feel like its frozen, so be patient.
Comments and suggestions other than my bad english will be apreciated.
Edit:
extended rom has the followings
Signed_NAMLOCK.CAB
PP_PIE.sa.CAB
PP_WelcomeMessage_1.3.sa.CAB
WelcomeMessage.exe
MP_CVSDcpl_20070129.cab
signed_070319_7500_Telus.sa.CAB
PPST.exe
TSK.sa.CAB
DefaultRingtone.sa.CAB
WM5DST_signed.cab
http://rapidshare.com/files/88177625/telus_jan31_a1jatt_os_and_extended.zip.html
EDIT : jan 31 update
removed rltoday
Added : htc gps tool, 10 buttom comm manager, task manager and x buttom
Fixed : phone setting save bug
If not pre packaged in an executable, how do we install it?
attached is the rom update utility.
extract this and then put the ruu_signed.nbh file from original post in this folder.
then run ROMUpdateUtility.exe.
Thanks for the advice. I had already figured it out though.
I do have to say, this is one amazing ROM for us Telus users. I love the default Telus phone dialer with the colours etc, the EV icon shows up normally, GPS works, Phone programmed itself easily, I just had to switch back to the HTC default black theme and get rid of the RL today plugin you had. I preffer the HTC home plugin myself but that was easily switchable.
Two thumbs up.
The mobile speed is through the roof! It acts just like it should, just like the stock Telus one! Except I have GPS now and the updated radios working like they should or so it appears. It's so fast!
Do you have to update the radio and and unlock rom?
EvilDeadFan said:
Thanks for the advice. I had already figured it out though.
I do have to say, this is one amazing ROM for us Telus users. I love the default Telus phone dialer with the colours etc, the EV icon shows up normally, GPS works, Phone programmed itself easily, I just had to switch back to the HTC default black theme and get rid of the RL today plugin you had. I preffer the HTC home plugin myself but that was easily switchable.
Two thumbs up.
The mobile speed is through the roof! It acts just like it should, just like the stock Telus one! Except I have GPS now and the updated radios working like they should or so it appears. It's so fast!
Click to expand...
Click to collapse
Do you have to update the radio what version and and unlock telus rom?
if so what sofware did you use? oil
vasters said:
Do you have to update the radio what version and and unlock telus rom?
if so what sofware did you use? oil
Click to expand...
Click to collapse
It looks like an OS only update. I'm going to give this a try for the heck of it.
just make sure you have the current unlocker installed and current radio.
Thankz a1jatt for the Telus rom !
I used the current unlocker, and I also updated to the latest radio.
A1jatt, Can you integrate Windows Mobile 6.1 into the rom? I'd love that.
^^ i think that will be too buggy right now.
btw i have made some changes today
I'm flashing it now. The changes sound nice.
What was with the 300xz breakdown image? I want the Telus startup image. How can I fix that?
Not a fan of pocketzenphone, either. I'd like the ones that comes with Telus.
I think you should keep a Telus rom as stock looking as possible, with the upgurades that you've included except for the Today changes. That should look stock, otherwise the user can easily change it themselves. Especially the Telus loading screen which is now a car.
just a question
so to use your custom rom do i have to use the unlock app then add your rom then the radio app also? or is this an all in one rom? yes im a noob lol
Use the unlocker if you haven't been unlocked yet.
Then boot the boot loader etc by pressing soft power, camera, and the hard reset on the bottom of the phone at the same time.
Once you're in that mode, go to activesync, click on file, connection settings, and uncheck usb while you flash the phone.
His latest download just requires that you double click on romupdateutility.exe and follow the prompts. Then do the radio update and let your phone boot.
I also noticed the camera feature is missing. The shortcut is missing or not working, and when I try to launch it, I get nothing. I tried to take a pic and voila.. fantastic.
hmmm
so is it worth this rom update or will i loose my camera feature?
The camera feature is nowhere to be found. I'm getting rid of the rom until this is fixed, and if possible, the things I suggested before. I'll have to cook my own rom some time.
hmmm
damn phone keeps rebooting again????? after installing rom and files? seems to happen as soon as i remove it from the usb connection?
I'm not sure what you did, but reflash it.
I have dcd's telus rom and have been using windows mobile phones ever since the samsung i700. His rom is the smoothest rom I have ever had so far. Keeping in mind it has only been 5 day's. Camera works and the only bug I have found since Sunday, the day I flashed, is the issue with the EV icon and voice mail icon. It's quick, smooth and hasn't locked once.
I'm not posting this to make light of this thread by any means. I appreciate and support anyone that produces rom's. Especially rom's that cater to specific carriers (Telus for me)! I only share this info in regards to my personal experience. The more options, the better it is for everyone. Please continue the great work!
same crap
anyone in hamilton that can do this for me??
If DCD had fixed the EV icon and the voicemail, I would switch to his.
OK guys,
Thanks to all hose who Beta tested the Neon WM6.1 Rom for the NEON.
I have just released V1:
Based on feedback from Beta testers this is the change log:
V1:
* Fixed HSPDA - When connection is idle 3G icon shows up, but when you use the connection it switches to HSPDA.
* Pagepool changed to 8mb
* Removed Diamond Dialer
* Kaiser Tweak
* Diamond USB to PC
* Reg Hack Hide Sim Contacts
* Reg Hack disable security warning
Important note: This Rom has only been tested with Radio 1.58.25.17. If you experience problems with your current Radio and this Rom you can download the Radio from the link at the bottom of the post.
These guys deserve a big thanks, Shortyboy and jcostanza4
Links
Public Beta: No longer supported, please update to V1 or V2
Radio 1.58.25.17 http://rapidshare.com/files/121638802/RUU_NEON_Radio_1.58.25.17.rar
NEON V1 http://rapidshare.com/files/127032001/Neon_WM6_1_RV1.rar
Pictures
Reserved for Updates
can somebody post this radio?
disflipissofresh said:
can somebody post this radio?
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/showthread.php?t=395384
freeze after flash
flash my one today and it freeze after loading into OS. You can't do anything except it need to soft reset and it start all over again. Have to flash it back to telstra ROM update.
avast detect trojan
could you give a quick scan with avast antivirus as this detect trojan when try to download
great !
did u have a link for the dialer !
Thx ?
i have an artemis !
Post #1 updated with new Rom.
thanks!
This worked perfectly with my Telstra HTC Touch dual (Neon) device.
For any other newbies like me, this is all I did-
Took my brand new Telstra Australia Touch Dual.
Installed the Neon Hard-spl here-
http://forum.xda-developers.com/showthread.php?t=377260&highlight=neon
Then just installed the rom in this thread. It works great, though i've lost my Office Mobile apps.
I had no sound at all on the first boot, but after reboot (and it does tell you to reboot again) everything was fine.
Thanks! And I look forward to trying your future releases.
woops one issue
An update on my install, I did actually end up having issues where as soon as a call was made or received all sound stopped working (which obviously makes calls a problem)
As per the original post, installing the updated Radio which took me from version .15 to .17 seems to have fixed this problem.
So are you saying that this ROM doesn't have
* video calling
* office apps
* or SOLITAIRE!?
Can they be installed afterwards or anything?
Cheers
jbng
Okay so I freaked a little when the camera stopped working and my guitar tuner wouldn't work, but it turned out I had to update the radio and that fixed both problems. It does seem to be smoother too.
Office apps are there, solitaire is there, but alas no video calling.
Can you get a third party app to do that, or will we have to re-flash the ROM if and when you add the 3G dialer?
I'm getting a bit sick of this hard reset rigmarole - although I am getting much more efficient at it!
Appreciate your work Seth - keep it up. BTW, the ROM update seems to have fixed my 'not waking up from standby' issues.
Cheers
jbng
You can use User Customization, works for me you only have to run it once after the hard reset and all you've configured will be setup. Maybe if Seth is really nice he will include it in his rom the next time so you don't have to run it manually. Check this thread: http://forum.xda-developers.com/showthread.php?t=366337&highlight=uc+junkies
jbngar said:
Okay so I freaked a little when the camera stopped working and my guitar tuner wouldn't work, but it turned out I had to update the radio and that fixed both problems. It does seem to be smoother too.
Office apps are there, solitaire is there, but alas no video calling.
Can you get a third party app to do that, or will we have to re-flash the ROM if and when you add the 3G dialer?
I'm getting a bit sick of this hard reset rigmarole - although I am getting much more efficient at it!
Appreciate your work Seth - keep it up. BTW, the ROM update seems to have fixed my 'not waking up from standby' issues.
Cheers
jbng
Click to expand...
Click to collapse
I'll try to make a cab for Video call now that i have figured out how to fix it.
You can always try my new Rom it has video dialing built in.
http://forum.xda-developers.com/showthread.php?t=403436
Thanks for all your work Seth
The ROM is working great - no lockups at all since installing it.
I seem to have conflicting information about Bluetooth being affected by radio ROMs - what's your opinion? The reason I ask is that my bluetooth range is pretty shocking (it won't even go through one thin wall in the next room) and I was thinking that maybe one of the newer radio roms might improve it.
Will the Niki roms on the radio page work in a Neon? Should 1.65x radios work with your ROMs? The 1.65s there seem to be from a Kaiser.
The other thing I've seen is a HTC-supplied 'bluetooth hotfix' for the TytnII - any opinion on that?
We'll hang out for your video calling CAB/ROM too. Not that I ever really video call, but if someone asks 'can you do video calling?' I want to be able to say that I can... ;-b
Actually that's a thing - if someone video calls ME, will I be able to answer with the current ROM?
Cheers mate
jbng
jbngar said:
Thanks for all your work Seth
The ROM is working great - no lockups at all since installing it.
I seem to have conflicting information about Bluetooth being affected by radio ROMs - what's your opinion? The reason I ask is that my bluetooth range is pretty shocking (it won't even go through one thin wall in the next room) and I was thinking that maybe one of the newer radio roms might improve it.
Will the Niki roms on the radio page work in a Neon? Should 1.65x radios work with your ROMs? The 1.65s there seem to be from a Kaiser.
The other thing I've seen is a HTC-supplied 'bluetooth hotfix' for the TytnII - any opinion on that?
We'll hang out for your video calling CAB/ROM too. Not that I ever really video call, but if someone asks 'can you do video calling?' I want to be able to say that I can... ;-b
Actually that's a thing - if someone video calls ME, will I be able to answer with the current ROM?
Cheers mate
jbng
Click to expand...
Click to collapse
See post 1 for the new Video Dialer.
In regards to the radios have a read here: http://forum.xda-developers.com/showthread.php?t=369502
I haven´t had much time to play with Radios. I´m using the radio of my post and my bluetooth is fine. The range is excellent, i live on the second floor and i still can get my cars bluetooth out the back in the carpark.
Hey Seth
VIDEO DIALER: didn't work. At all. I installed the cab, soft reset and had no phone dialer whatsoever. I don't mind reflashing the rom if that's what needs to be done - is the rom file on the front page updated with the video dialer? Or if the cab doesn't work will the rom not work too?
RADIO ROMS: it seems that the one you list is the best and latest for the Neon. The Niki ones and the Kaiser ones simply won't load. It's largely irrelevant anyway - because I don't think it's the phones problem...
BLUETOOTH: I faffed around for ages last night doing some tests with my dual and my decrepit old o2 mini (which used to have great bluetooth range) and it seems that the problem may be with the transmit power on my *computer* rather than on the dual. I left my dual next to my laptop at one end of the house, and then went to the other end of the house and did a search with the o2 mini. it found the dual but NOT the computer. I swapped phones and searched with the dual from the other end of the house and the same thing happened. So the phones have good range to each other, but they're both having trouble finding the computer.
I'm just waiting to get my hands on another laptop with bluetooth and then I can see if I need to call the good folk at Dell to replace my bluetooth module perhaps.
I'm also wondering if the laptop has gotten into its head that it's a 1m device instead of a 10m device. It's strange that I've only noticed it since getting my new phone, and now the old phone seems to have limited range too.
Anyways, blah blah blah - please let me know if you get any further with the video dialling in either the rom or the cab - and/or if there's anything you'd like me to test out for you.
Cheers
jbng
jbngar said:
Hey Seth
VIDEO DIALER: didn't work. At all. I installed the cab, soft reset and had no phone dialer whatsoever. I don't mind reflashing the rom if that's what needs to be done - is the rom file on the front page updated with the video dialer? Or if the cab doesn't work will the rom not work too?
RADIO ROMS: it seems that the one you list is the best and latest for the Neon. The Niki ones and the Kaiser ones simply won't load. It's largely irrelevant anyway - because I don't think it's the phones problem...
BLUETOOTH: I faffed around for ages last night doing some tests with my dual and my decrepit old o2 mini (which used to have great bluetooth range) and it seems that the problem may be with the transmit power on my *computer* rather than on the dual. I left my dual next to my laptop at one end of the house, and then went to the other end of the house and did a search with the o2 mini. it found the dual but NOT the computer. I swapped phones and searched with the dual from the other end of the house and the same thing happened. So the phones have good range to each other, but they're both having trouble finding the computer.
I'm just waiting to get my hands on another laptop with bluetooth and then I can see if I need to call the good folk at Dell to replace my bluetooth module perhaps.
I'm also wondering if the laptop has gotten into its head that it's a 1m device instead of a 10m device. It's strange that I've only noticed it since getting my new phone, and now the old phone seems to have limited range too.
Anyways, blah blah blah - please let me know if you get any further with the video dialling in either the rom or the cab - and/or if there's anything you'd like me to test out for you.
Cheers
jbng
Click to expand...
Click to collapse
I will do two things tonight.
1 - I'll flash this Rom back on my device, i'm currently using SETHS DIAMOND V2 Build 19214.1.0.4. And i'll try to work out why the Cab doesn't work.
I'll rebuild this rom and include the video dialer if point one fails.
Cheers
Hey Seth
In the interests of 'giving something back' - here's a handful of splash screens for the diamond and the neon for you to take or leave...
Your 'logo' is supposed to be a square ROM chip but with griddle lines over it (you're a chef, after all). It also happens to be an 'S'.
If you want any further tweaks or raw files let me know.
Cheers
jbng
PS. While we're on the subject of splash screens, I get an 'access denied' error when I try to replace the windows mobile startup .png file on your latest Neon ROM. Any ideas why that would be the case? With the previous ROM my file just copied straight over the top.
jbngar said:
Hey Seth
In the interests of 'giving something back' - here's a handful of splash screens for the diamond and the neon for you to take or leave...
Your 'logo' is supposed to be a square ROM chip but with griddle lines over it (you're a chef, after all). It also happens to be an 'S'.
If you want any further tweaks or raw files let me know.
Cheers
jbng
PS. While we're on the subject of splash screens, I get an 'access denied' error when I try to replace the windows mobile startup .png file on your latest Neon ROM. Any ideas why that would be the case? With the previous ROM my file just copied straight over the top.
Click to expand...
Click to collapse
Hi jbng,
Thanks for the wonderful images. The only program i know that can overwrite system files is Total commander. Just copy the file to your storage card and then use total commander to overwrite.
If that doesn´t work i posting 4 cabs on my latest Neon Rom for who ever wants to use your great artwork.
Regarding the Video dialer i just realized that RV1 has video calling, only the public beta didn´t. Please update your rom to either V1 or V"2.
Thanks
I have Verizion Wireless. I just installed BootLoader 2.40, Titan_Radio_ROM_3.42.30, dcd_titan_kitchen_3.2.2, and dcd Verizon Carrier 20080706.cab. I don't know if I was supposed to, but also did *228 option 1 to program my phone and *228 option 2 for updating roaming cababilities. The internet works fine on the phone and I can recieve text messages without any problems, but I can't make or recieve phone calls. Thanks for your help and time!!
Gonna go out on a limb here and guess that it's saying you're not authenticated?
You need to call Verizon and have them authenticate you. It's normal when you go from stock to a GPS radio.
I go with gc14 on this one. Just had the same thing happen to me a while ago after just doing a hard reset...no update ROM, radio, or anything. Just hard reset and no more authentication...what a pain. lol
Oh, yeah. I listened again and that's what she said. OK, I'll call them tomorrow.
I even got my TomTom GPS software working. I didn't need to use any 3rd party software to get it working either like it said on the forums.
I even got Opera Java working, but I got some kind of message when I was installing the Java software saying that Sprint couldn't guarantee something. I don't remember the exact message, but I don't have Sprint, I have Verizon. Did I install the wrong ROM or something? Am I going to have problems now? Thanks!
How come everywhere I go now it thinks my phone is a Sprint PPC-6800, when it's really a Verizion XV-6800? I just went to Yahoo.com and it's calling my phone a Sprint PPC-6800. Is this going to cause any problems with my Verizon account? Thanks..
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Apota said:
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Click to expand...
Click to collapse
I don't use text messages, so I can't be sure, but I think there are other links about text messages. You likely need to install a program. Try searching and let us know if you find it.
As far as the flash with v5 of camera, I think you are out of luck. My memory is there is no flash. There is a way of installing the old camera back without doing a hard reset. I just don't remember how to do it. You can try searching for this too. Again let us know if you find it. Hopefully someone else will be able to help more.
Yes, I think I found the solution, I did what it said and now it says SMS/MMS, but I haven't tested it yet. So, I'll see. I just need to know about the camera now. That's the only issue..
http://forum.xda-developers.com/showpost.php?p=2220029&postcount=6
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
don't down grade just reflash a cooked rom with the version 4.05 something camera has a flash
Reflashing ver 4.05 when you'd installed ver 5 IS downgrading in my book
Big Dawg 23 said:
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
Click to expand...
Click to collapse
1st - The camera you used is version 5, to have the flash again you will need to re-cook a ROM with version 4.X....
2nd - For the latest MMS, use GC14's 5.0.31.25 cab of Arcsoft. The incoming MMS issue where the phone number is shown instead of your contact has been fixed. Find that cab here MMS 5.0.31.25
Yes, I've already read all of those links many times. I saw the information about the OEMizer. It said it was OPTIONAL. It doesn't really tell me what it is, or what it's for. Since this was the first time I ever installed a new bootloader, radio, rom and VZW cab, and didn't really know what I was doing, I didn't want to make it too complicated and overwelm myself. I still don't know what the OEMizer is, but I guess I can run it and see what happens. I need to make a new ROM anyways for the camera. I still have a few questions.
- What is the OEMizer for and is there someplace that explains it's settings?
- I can't find OEMizer in the Kitchen's Tool directory or any of the other Kitchen's directories. Where is it at? I did a search on the internet and couldn't find it.
- What is PagePool Changer? Is that something I need to use?
- Now I have the latest bootloader and radio installed in my phone already, can I make a new rom via the kitchen and just install it without having to worry about anything else?
- I guess I will still need to run the VZW cab file after I install a new ROM, but that should be it, right? Just those two things?
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
- WM6.1 is grouping all my text messages together, which is great and I love it, but the only problem is sometimes I want to deleate one text message and it seems like you can't and you have to delete all the text messages from the same person. Is that true, or is there a way around it?
Thanks everybody again for all your help!!!
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
Click to expand...
Click to collapse
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
To use this, uninstall any version of Arcsoft you may have installed currently. Once it is fully uninstalled, check your registry and make sure there is nothing for Arcsoft under "HKLM\Software." Next, install this cab. Once it is done installing, check your registry under "HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader" and make sure X-VzW-MDN is set correctly with your phone number.
gc14 said:
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
Click to expand...
Click to collapse
Yeah that was just for testing purposes originally...to make sure the previous one was completely uninstalled, then to make sure the new one installed correctly. It's been verified working though for a while.
Scott’s VZW ROM - Working VZ Navigator (eRice kitchen v1.03.7) - Rev 1 out!
UPDATE 19 DEC 2008 @ 18:00 Central Time. New ROM is out. Consider this thread discontinued. Files will be on the website for historical purposes. I would recomend upgrading to my latest ROM here: http://forum.xda-developers.com/showthread.php?t=461524
UPDATED 12 Dec 2008 @ 19:00 Central Time
** You will need to dial *22899 after you flash to reprogram. Do this before anything else.
** Other model phones from other carriers will loose custom EPST settings per NexVision's testing.
REVISION 1 Changes at the end of this modified original post
This ROM IS FOR VZW USERS ONLY!
Greetings fellow VZW users. My first creation for us is Custom a ROM based off of eRice’s kitchen in this thread: http://forum.ppcgeeks.com/showthread.php?t=46965.
ROM Info:
**The ROM I created is nearly identical to the “STOCK” ROM with a couple minor additions and an upgrade to the core CE OS files to version 5.2.20931. I pulled all the apps and drivers from the leaked VZW ROM in this into the eRice kitchen from this post: http://forum.ppcgeeks.com/showthread.php?t=42741
**I stripped out the Sprint drivers and applications from the eRice kitchen and added the VZW drivers and Apps from the VZW leaked ROM. It was fairly seamless to do. I tested VZ Nav and it worked great!
** This ROM is considerably more smooth than the stock ROM and more responsive in most applications including Touch Flow. No, it doesn’t fix our missing memory problem but I dont think you will notice it as much now. What makes it great is it is based on the 20931 CE OS but retains the 100% stock look via proper drivers and applications.
**VZ Navigator runs well on this ROM!
As far as I know this is the first “Custom” ROM with any sort of GPS for the XV6850.
**********************
*Revision One Changes*
**********************
Added N2A Weather Patch to Autoinstall. INcludes most US cities and patched weather server.
Added Diamond TF3D Config to Autoinstall (Runs with no errors)
Added Nue Fonts with a few extra fonts than what the OEM normally has. They look great on this screen!
Added Advanced Config 3.3
Added Turn off SMS Sent Notification - cabbed by "mixtapeking1900"
Added DotNET CF 2.0 along side DotNet 3.5. DotNet 2.0 installs first then ver 3.5 via Autoinstall (CONFIG.TXT in extended package OEM for the kitchen users.) I bieleve either could be removed but not truly sure. DotNet 3.5 was needed for Advanced Config.*Note - Selecting dotNet 3.5 in the KITCHEN will cause problems! Dont do it unless you proplery modify config.txt to not load them in the AutoRUN.
Removed IE 6.1 (Breaks My Button Setup!)
Removed JetPrint Bluetooth printing (whatever it is called, not sure)
Fixed My Button Settings not launching from the Settings Tab in Manila
Fixed Voice Command> I added it back in. Go to "Settings -> Voice Command" to turn it on before it will RUN!
Kept HTC YouTube
Kept HTC Network Plug in
Kept Internet Sharing
*All Three of these are from the eRice Kitchen. Big thanks to eRice for all 3!
No other installed programs than those listed and the VZW OEM apps.
The ROM is now pretty close to Stock which was the goal. This should be the last revision unless someone finds a major bug.
AS always, please report bugs and any thing you like as well.
Files located at www.scottcrosler.com
Mad Thanks go out to eRice, Commenex and ImCoKeMan for making this possible! Without them none of this would exist!
UPDATED 12 Dec 2008 @ 19:00 Central Time
Basic Installtion Instructions
Download ROM and extract to desktopp (Now includes RUU). Start the ROM Upgrade Utility and follow instructions Flashes just like ANY other phone or ROM. Flashing will destroy ALL data on phone. Always sync with ActiveSync before starting the upgrade utility OR place your phone in bootloader mode (Power, VolDown, and reset)
A call to *228 or *22899 (automated activation line) WILL BE REQUIRED for normal usage! This is true of ALL ROM's and even a simple hard reset of the Verizon stock ROM.
Before you flash you MUST be unlocked. I do not support the unlock process or the software but I can tell if you that if you follow the instructions at the link it works perfect.
Link to unlocker is here: http://forum.ppcgeeks.com/showthread.php?t=42503
Link to ROM and RUU is here: http://www.scottcrosler.com/
Bugs so far:
Wiped Clean on new revision
**Here is where you will see gains with this ROM over stock...
1. Navigating through menu's, especially the settings menu.
2. Smoothness of TF3D (debateable depending on the tabs.) First time will be slow for EVERY device if you leave ALL the tabs enabled. Each tab is a like a sep app that has to load when you select it. After the tabs are loaded you will see even more gains over the stock ROM.
3. File explorer. Go to the Windows folder. No further explanation needed there, trust me. The stock file explorer took nearly 15 seconds to load Windows. This does it almost instantly.
Updated Kitchen Files!
This is for the eRICE KITCHEN. This is not my own Kitchen but an add on of VZW OEM files to the eRice kitchen.
Its the OEM pack that I used to create this ROM. Its what I stripped out of the VZW leaked ROM. I added just a couple OEMs that are not in the cooked ROM. I dont have the original OEM's broken out! IF anyone wants to break it down further like eRice did with his original kitchen let me know and I will host it on my site.
INSTRUCTIONS FOR KITCHEN SET UP:
Download and extract (to desktop) eRice 1.03.07 kitchen from here:
http://forum.ppcgeeks.com/showthread.php?t=42796
Delete the entire OEM folder from inside the kitchen!
Download and extract the VZW OEM folder from www.scottcrosler.com and place it in the eRice kitchen as to replace the one you just delted. I made one minor change to the pure VZW OEM folders.I dropped the phonecanvas XML provisioning file into OEM apps. i think it supposed to be in SYS but I dont know.... It works fine the way it is. If you have never heard of the file then ignore this part of the post.
Start RaphealKitchen.CMD and follow instructions.
***Do not select DotNET 3.5 in the kitchen!!!. It is enabled by default, delelect it. Will cause issues.
I will try to support the kitchen as much as possible. Please do not bother eRice with this hybrid kitchen as I am sure he will not support my hybrid creation.
Thank eRice for this kitchen.
Thank the original poster of this thread for the leaked ROM I worked with:
http://forum.ppcgeeks.com/showthread.php?t=42741. Not sure who posted it.
Thank me for putting it together!
I AM NOT TAKING CREDIT FOR ANY OF THE FILES. I do however take credit for converting to VZW OEM.
Should there be a link to your ROM here?
Are there instructions on how to flash?
Like putting phone into bootloader mode or anything else necessary?
Does the unlock process wipe the phone or does only the ROM update wipe?
Anyone tried this yet? Any reviews?
It's a lot of work to reinstall everything and to re-apply my special settings, even though I've been documenting what I've done.
Also, I was thinking of trying that Telus radio. Can I still try that on this? Does a radio update/change wipe the device clean or that's non-destructive?
lexluthor said:
Should there be a link to your ROM here?
Are there instructions on how to flash?
Like putting phone into bootloader mode or anything else necessary?
Does the unlock process wipe the phone or does only the ROM update wipe?
Click to expand...
Click to collapse
I updated the second post with the steps you need. Sorry was trying not to get flamed on my thread. Someone over at PPCGeeks flamed me for pretty much no reason other than the fact that they could. It only stopped me from releasing my ROM over there. Oh well. There loss. Too bad because there are some really good people over there. The eRice kitchen was perfect in every aspect of a ktichen. I was never so impressed. Impressed enouhg to download the leaked ROM and portover the VZW software ;c) Its a nice change over the stock CE OS. If you flash let me knwo what you think.
Hi Scott,
I've been lurking on both forums since I got my Titan last December. I have learned much from everyone here and over at PPCG: these are the best resources by far for those of us into our phones and the tech behind it.
I agree that you were treated less than "professionally" over at PPCG, and hope that you will continue to work on the VZW TP/XV6850. Thanks for this great use of Eric's kitchen tools and stock ROM, along with your knowledge on how to get them all working for us! My take from the eRice thread is that he has no issue whatsoever with you using his stuff, and in fact he welcomes it for us VZW stepchildren... hehe.
This ROM does indeed kick arse, and hopefully GC and others will figure out the PRI lockdown and we will all have an amazing little machine to play with: it is w/o a doubt a much slicker device than the Titan, and I dug that little unit for the better part of a year
Cheers Pal
digitalattic said:
This ROM does indeed kick arse, and hopefully GC and others will figure out the PRI lockdown and we will all have an amazing little machine to play with: it is w/o a doubt a much slicker device than the Titan, and I dug that little unit for the better part of a year
Cheers Pal
Click to expand...
Click to collapse
You've installed this ROM? Is the difference completely obvious?
digitalattic said:
Hi Scott,
I've been lurking on both forums since I got my Titan last December. I have learned much from everyone here and over at PPCG: these are the best resources by far for those of us into our phones and the tech behind it.
I agree that you were treated less than "professionally" over at PPCG, and hope that you will continue to work on the VZW TP/XV6850. Thanks for this great use of Eric's kitchen tools and stock ROM, along with your knowledge on how to get them all working for us! My take from the eRice thread is that he has no issue whatsoever with you using his stuff, and in fact he welcomes it for us VZW stepchildren... hehe.
This ROM does indeed kick arse, and hopefully GC and others will figure out the PRI lockdown and we will all have an amazing little machine to play with: it is w/o a doubt a much slicker device than the Titan, and I dug that little unit for the better part of a year
Cheers Pal
Click to expand...
Click to collapse
You know what Dude, that is all I needed for motivation! You verizon users have some serisou **** instore for you ;c) Thanks for the positive feedback! Im motivated again!
They will figure out the PRI crap. It will take time. I wish skywing would port over his adapter program. I could incormporate that and we would have 100% GPS just like everyone else. He stated in his thread he was not interested in doing so. Thats a huge loss for us that we never even had ;c(
For the record!
For the record:
I have always asked permission before I redistribute any item found here. I asked DCD for his kitchen when I posted my R4R ROM for the Titan's.
I asked eRice specifically if I could port his stuff over for VZW users. His response was:
"if you can get the sprint carrier files split from the rom/kitchen and include the vzw ones, more power to you. that's what this forum is about. sharing ideas and results and improving on them for the benefit of everyone."
Its posted here. Just for the record ;c)
http://forum.ppcgeeks.com/showpost.php?p=567803&postcount=56
lexluthor said:
Should there be a link to your ROM here?
Are there instructions on how to flash?
Like putting phone into bootloader mode or anything else necessary?
Does the unlock process wipe the phone or does only the ROM update wipe?
Anyone tried this yet? Any reviews?
It's a lot of work to reinstall everything and to re-apply my special settings, even though I've been documenting what I've done.
Also, I was thinking of trying that Telus radio. Can I still try that on this? Does a radio update/change wipe the device clean or that's non-destructive?
Click to expand...
Click to collapse
A few people have tried on PPCGeeks with great success as posted above.
Keep it coming. Two things to note. And YES I Just installed this ROM.
First, I had to *228 (not surprised but it is required to get data connections to work. This has been true for every ROM i've played with as well as custom ROM's i've built in the kitchen.)
Second, Comm Manager is missing from the slider menu with TF3D enabled. (Although still accessible via the keyboard shortcut.)
I will play some more and let you know what else I find. Thanks.
bkurek said:
Keep it coming. Two things to note. And YES I Just installed this ROM.
First, I had to *228 (not surprised but it is required to get data connections to work. This has been true for every ROM i've played with as well as custom ROM's i've built in the kitchen.)
Second, Comm Manager is missing from the slider menu with TF3D enabled. (Although still accessible via the keyboard shortcut.)
I will play some more and let you know what else I find. Thanks.
Click to expand...
Click to collapse
The comm manager TAB or the comm manager link in the settings Tab? Its just fine for me. There is no Comm manager TAB in VZW version of TF3D.
I see you use the PPC Kitchen. That does have the Comm Manager Tab and you are used to that. This version is stragiht ripped from the ROM. No changes AT ALL. The stock phone doesnt have COmm manager Tab.
How about responsiveness?
Launching VZ Nav opened Opera and downloaded the CAB. CAB launched got to privacy screen but complained about not being able to save privacy settings. Only option is to lick OK. You are then brough tto the "default" VZ NAV error screen telling you there was a problem with your GPS device. I do have the CAB for VZ NAV now however.
Re-Launching VZ NAV produces the same result. Unable to save privacy and crashes out.
My mistake. You're right. I've gone through so many ROM's that it's a blur. The "Communications" link is still under the "Settings" tab in TF3D as it should be.
So far responsiveness is good. I have not configured the settings for my "regular" business use however.
Perhaps the reason VZ NAV will not install is because it's the official signed version?
bkurek said:
My mistake. You're right. I've gone through so many ROM's that it's a blur. The "Communications" link is still under the "Settings" tab in TF3D as it should be.
So far responsiveness is good. I have not configured the settings for my "regular" business use however.
Perhaps the reason VZ NAV will not install is because it's the official signed version?
Click to expand...
Click to collapse
No, It always crashes twice at the initial set up, even on the Stock ROM. Its a crappy program I know! Try it a third time and you are good from then on. If not let me know and I will upload the Cab that I have. Nothing special about it though.
EDIT: I relfashed my phone, installed and it worked for me. It still does the three times to load problem. Two GPS errors for me. Then the third time it starts. THis is the EXACT behavior of the stock ROM.
bkurek,
How do you "go through so many roms"? Isn't it an hour or more to reinstall all of your apps and personal settings or is there some easier way that I'm missing?
I can't restore with SPB Backup, right?
Would you say this rom is noticeably faster?
lexluthor said:
bkurek,
How do you "go through so many roms"? Isn't it an hour or more to reinstall all of your apps and personal settings or is there some easier way that I'm missing?
I can't restore with SPB Backup, right?
Would you say this rom is noticeably faster?
Click to expand...
Click to collapse
You MAY be able to restore with SPB back up. MAY being the keyword. You can always try it. It wont hurt anything. Worse case scenraio; Hard reset.
I will let bkurek answer the respoinsiveness question. Anything from me woudl be purely biased ;c)
bkurek said:
My mistake. You're right. I've gone through so many ROM's that it's a blur. The "Communications" link is still under the "Settings" tab in TF3D as it should be.
So far responsiveness is good. I have not configured the settings for my "regular" business use however.
Perhaps the reason VZ NAV will not install is because it's the official signed version?
Click to expand...
Click to collapse
I relfashed my phone, installed and it worked for me. It still does the three times to load problem. Two errors that you just click though then the third time it starts. THis is the EXACT behavior of the stock ROM. It crashes twice on the Stock ROM as well.
Also did you install to storage card or main memory? I only install to main memory.
scrosler said:
You MAY be able to restore with SPB back up. MAY being the keyword. You can always try it. It wont hurt anything. Worse case scenraio; Hard reset.
Click to expand...
Click to collapse
That's true. Since it's basically the stock ROM, I might have a shot. I guess the one thing that might be a problem would be your IE6 update.
lexluthor said:
bkurek,
How do you "go through so many roms"? Isn't it an hour or more to reinstall all of your apps and personal settings or is there some easier way that I'm missing?
I can't restore with SPB Backup, right?
Would you say this rom is noticeably faster?
Click to expand...
Click to collapse
I go through them because I enjoy doing so and I'm looking for what *I* want. Yes it can be that long but I don't go through all the motions until I've found the right combination/foundation to build on. I did not for instance configure ALL of my email accounts or setup active synch in vista, etc etc
Yes it does feel very snappy but just like anything else you'll find it to be faster today and go back to *****ing about how slow it is tomorrow. It's a matter of perception in the end. You'll always want more. I'm actually more interested in a stable build than a faster one because I already know it'll never be as fast as I want it to be. I have experienced a myriad of stability issues that if I don't find a remedy for I will return this phone. They manifest mostly in the messaging components at this time. I have not had to soft reset a phone this much since 1990-something. Speaking of which, as a completely uninteresting side note, I have not posted to a forum since early 1990-something but the point is that I do like this device and would like to see it improved upon is why I am taking the time to post now. It’s a cool phone. Give it some time. Someone, somewhere will make it faster and more stable. I think.
scrosler said:
I relfashed my phone, installed and it worked for me. It still does the three times to load problem. Two errors that you just click though then the third time it starts. THis is the EXACT behavior of the stock ROM. It crashes twice on the Stock ROM as well.
Also did you install to storage card or main memory? I only install to main memory.
Click to expand...
Click to collapse
Interesting. My stock did not have this problem but it came pre-loaded with VZ NAV. Third time is the charm.
Program files and things I don't want to lose always go to main for me.
Can it be? Is mr. dcd1182 back from the dead?
My Touch PRO has been waiting it's whole life for a dcd rom, i searched but didn't find anything about this goodie!!!!!!!!!Anyone have a clue about anything about it?
It looks like it was uploaded 5-22-09
It also has a PagePool of only 6Mb, is this a verizon rom? I'm afraid to flash my Sprint TP not knowing anything else
*edit, if you need instructions follow my post on ppcgeeks, seems like more people are trying it out over there
Back when i had my Titan i would run DCD all the time and loved his work enough to donate. right now i'm running Mightymike 4.16 and have been looking to flash another rom. perfect timing.
DCD, thanks for making the move to the Touch Pro.
for those looking for HTC task manager, i'm using the one below. also DCD used GfxBoost in .92, but i didn't see it in .96 or later builds so i included it also.
whoa, it must be really really stripped. it's only 64 mb?
How did you find this and does he even want it "released"?
cmajewsk said:
How did you find this and does he even want it "released"?
Click to expand...
Click to collapse
His site is public. If he doesn't want to share it, then he needs to change the website/ftp settings. As far as I know, he hasn't officially "released" it yet. No announcements from him. I tried it, but the mobile internet wasn't working consistently, so I had to go back to mightyrom.
ROM is very fast and stable and data worked fine for me on Sprint. However, the phone would not ring on incoming calls. I checked all the settings I could think of and vibrate works fine but no ring. Flashing to another ROM only because of that. Bummer...
for some strange reason my data goes in and out. i can't seem to track down the cause yet. i'll mess around with it some more. also DCD is using a different build of opera mobile then i'm used to. i just loaded up the newest build i could find and all was well
Edit: here's a link to the opera i used. it's pretty new
http://forum.ppcgeeks.com/showpost.php?p=940117&postcount=88
Wish List!!!!!!!!!!!!!!!!!!!!!!!!
Just my 2 cents so here we go.
I would like to see the this rom include:
1. Full qwerty keyboard.
2. Ability to turn of flashing light on new txt, email, etc.
3. Random access added
4. On people tab add ability to contact via txt, email or call as only has ability to call now! BOO
5. When viewing txt, email, etc. from said tab, mark items as read removing new count number, without having to launch said app.
thanks in advance!
.96
There's a .96 .exe in the link now......time to flash..
Nate
there are (I think) two apps that are vital for this rom to work great: HTC task manager and GfxBoost. Anyone interested in this rom should us these.
very fast rom...i think faster than yay4jugg which i was using for a few months now.
just needs pagepool changed
opera is set as default. how do i disable it or remove opera.
also noticable fast battery drain.
works on sprint. just need the sprint cab.
DCD has 1.02 up now
This is not at popular as the thread over on ppcgeeks, but there still might be some people that have not seen this yet and that would be a shame.
DCD just posted 1.09. i'm running 1.08 and it's one of the best Pro roms out there. give it a try.
t0mmyr said:
follow my post on ppcgeeks
Click to expand...
Click to collapse
Here's is a link to that thread I'm trying to keep up to date until dcd steps in and makes it official