my HT1100 after i do TASK 2 with MTTY n flash a rom with CUSTOMRUU, its dead..won't turn on,non
tri-color moldle, no connect to pc,i try every think to turn it on,but nonthing happened
1st i did task 2a,2nd i did info 8 found no os inside,so i put out/in the usb when the tri-color till there,n star CUSTOMRUU
flash a new rom into it,it pass 100%,when automatic restart,it won't turn on again,i found my simcard is inside......that is all my process!
Related
Hi all,
I have been upgrading the o2exec, after finishing the upgrade the device is not booting any more, it's sits on the o2 screen, I have tried the SR+Camera button combination, and it takes me to the MN2 Bootloader screen and I see the options available, which one to choose? can any one help.
Thanks
I connected the device through USB, and chose option2 but it comes back with this message "Please DSUU in OS mode and sync with PC first" Usb Transfer Fail.
The problem is that I can't boot the device, as I said before it sits on the O2 screen and doesn't do any thing.
you can try hard reset your atom exec.
i have got the same problem!
hi,
i tried freflashing the WM5 rom but got connection error while doing it and now it stuck at the bootloder mode.tried doing it all over again but the device keeps on turning off after a while and then turn on again and everytime it tuns off i get the connection error msg.tried chargin the device but theres no red lght indicator when charging..the device will keep on on and off by itself..
pls help
Charge the device (using the mains supply or a battery charger).
Start the device up, and then manually enter bootloader.
Then, follow this http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Since you can enter bootloader, it should be relatively easy to fix.
Prophet stuck at bootloader
Hello Friends...
While Trying to update my prophet rom something really wiered happened to it... after installing new roms it comes back to RGB colour screen and only shows IPL 1.00 & SPL 3.08.0001 moreover it says "Format is Failed"
is it possible for a device having G3 IPL and G4 SPL ?...
Please Help me out what should i do now ?...
1. What happen:
- When I talk phone get reboot. I power down phone, remove the battery, count to 10 and put the battery switch on. When I try co call phone get reboot.
- I start boot loader and try to flash with RUU_Prophet_220734_2207114_024721_NVID but after 10% phone get restart. I try again and phone restart again (the percent not great than 22%). After 10 attempts I start to write this question.
2. What is the phone & OS
computer OS - XP Pro - ActiveSync 4.5
phone
IPL :2.20.001
SPL :2.G4.4PDA
At this moment any switch ON the phone go to boot loader mode
My Question:
Is this a hardware problem or is there some kind of software error
Thanks in advance.
Could you connect to another usb port and try again ?
Hi.
Try to charge your phone (wall charger) around 1hour and try to upgrade your rom. If after charging your phone starts in bootloader mode/tricolor try to soft reset and try again.
Good luck!
these are my problems when i accidentally flashed a not so clean rom and unstable one:
1.) when the official screen logo welcome appears... it doesn't show any information about the rom like
ipl 2.xx
spl 2.xx
radio etc..
the welcome logo screen itself.
2.) i cannot charge my phone when it is turned on. the only way is to turn it off..
-this gives me another problem when it comes to syncing my 02 xda atom.. since it does not recognize any usb connections when it is turned on..
3.) wifi doesn't turn on?,, when i tap the toggle in the comm manager, loading icon will show for about 10-15 seconds and leave the wlan still turned off,,
i tried to flash helloworld wm6.1 using sd card since my 02 atom cannot recognize any usb connections when it is turned on.. in bootloader mode i've waited for 20 mins as it is expected to boot for that span. but still nothing happened. it did not work. bootloader mode did not show any sign of progress.
i've read some threads that there are registry edits that disables charging through usb connection.. but can't find it in the net.. any idea??
any possible solutions??
help!!!
thanks....
try to soft reset your device, if you still get the same problem go to the bootloader (three color screen) then reflash again ..! try the Flash ROM by manufacturing your device... good luck prince
I was doing an upgrade from WM5 to WM6, but for some reason it completely disconnected from the PC during the flashing process and now it has the green light on the joystick and the black screen syndrome, not booting into anything.
I can access the bootloader and reset screens (though hard reset does absolutely nothing). I have also tried to connect it back to my PC but even after doing that, it doesn't get recognized, ActiveSync and WMDC ignore it.
Any help?!
(Tried to find a WM5 rom to try to flash it with my miniSD but all of the links are dead, does anyone have a backup???)
I was same wrong as you. you can try camera+rest to 3 colors boot ,then try USB update。good luck!