Download View attachment package-creator-v27.zip
After downloading the package creator Extract to any folder and run package-creator-v2.7.exe. Select language and select group to insert package. Here The group reffers to Programs. You can add or edit lang.xml to add or delete groups.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then click on Open Cab File and navigate to your cab file and Click Open.
Wait until it shows you done Confirmation window. Then navigate to the cab folder and you will see new folder with OEm package. This tool will generate initflashfiles.txt, option.xml, .dsm and .rgu for the kitchen ROM.
Copy the OEM package to your kitchen and have fun with customizing your Rom
(found this somewhere on internet, correct me if i m wrong)
Great work! Nicely done tut. Here is another method to do so. This one is a bit faster but it doesn't always works.
Cab2OEM is also a free software that can be used to convert cabs to packages. This software is a command-line utility with no GUI but it does its job pretty well.
Cabs are of two types, the older ones with an inf file with extension .000 inside that describes the installation process and the newer ones with a _setup.xml files. Cab2OEM works on XML ones only.
Usage:
Its simple, just fire up a command prompt and run this command:
Code:
Cab2OEM -f <path to cab>
Here, replace path to cab with a real path. In a few seconds, it will convert the cab into a folder in the current directory.
NOTE: Cab2OEM creates an option.xml file inside the package which provides a description to the package that can be seen while running build os. but by default, it doesn't adds the package to the buildos list. I recommend you to delete this file.
This method is not as advance as Package Creator but its a quick and dirty one Package Creator can work with all cab files.
The file is attached with this post.
Great Work
Good going man....
Can you suggest some good and easy Kitchen for old gene..
Can i also include cracked applications...in custom ROM
Ramerson's kitchen is the easiest one i have ever seen. But the whole process of cooking ROM can never be easy, no matter which kitchen you use.
We strictly dont support cracking etc here so no answer for that.
Many thanks Krazy.......
Can ur ROMs be used to delete some packages and include some freewares...
please guide me about the pagepool.....what are disadvantages of increasing or decreasing it...does it help in increasing RAM....
I read about a thread which says RAM can be increased by deleting ExtROM...
Your expert comments please....
Also the Ramerson's kitchen link and "How to gude" if possible........
That would be nice of you....
Heres a quick response:
1. Yes my roms can be dumped and modified as per your needs. The only thing you need is the knowledge of how to dump them properly for recooking. For that refer to ramerson's tut.
2. Pagepool is that reserved part of memory that is never available for the programs to use and iit is used by the OS to maintain its internal state, data structures and so on. More the pagepool memory, more resources the OS will have and more simualtaneous running programs you can have. But this clashes with the fact that programs also need RAM for other purposes other than the OS provided resources. So the contradiction is that you cant run more programs simualtaeously id you have less RAM. So increasing Pagepool decreases RAM but increases OS resources, Decreasing page pool increases free ram and decreases OS resources. Chefs have to keep a balance between that. For gene, 6 MB of Page Pool is recommended, keeping in mind all the specs of the devices. Pagepool has to be changed everytime you recook the ROM as of now.
3. My ROMS use 4 MB of ExtROM and that is optimal, by default you have 10 MB of ExtROM. SO no need to messup with that, device doesnt boots with extroms smaller than that. Ramerson has also confirmed this.
4. Ramerson Kitchen is a seprate thread in this same forum, use your eyes and mind for that. How to Guide is currently not available as step by step, but Ramerson's tut which is a sticky post, will help you greatly.
I hope my answers helped.
o my god my head is spinning
hi guys
i tried reading all this and my god o god my head went for a spin i think for me to do any thing cook rom and all this in this chapter will take me a long long time of reading which im realy not great at
but reading all this give me more repect for Krazy,ankit,ramersnow and all u great techi guys
u guys are great man hats off to all off u and thanks a million
^Thanks Hari. Actually the gene you are having in your hand is not very less complex than any other computer. So apart from some basic differences, most of the elements of computer engineering can be applied to this small buddy as they are applied to computers. Thats why it seems so darned techie, coz it is techie
i meant every word
hi
to all u great contributors to this great forum i thing all these tuts available are a great eye opener to a totally non techi guys like me who uses ur great services which you actually do for free i having read many many tuts have clearly understood the time u are spending for us to enjoy and i really really say from my heart hats off to u guys and thanks for ur great contribution
and in the future when things get better for me i will start donating
and the funny thing is i sell computers for around 10+yrs
but this info in the tuts is a total head spinner for me
getting to next level
Great Krazy....
U r true krazy about technology......
To run emulators like SPB Mobile shell in best performance what should be optimum pagepool....
New version of Package Creator
Please find newer version of package creator, Version 5.4 to be exact
http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial
Thanks man! this will really help
imblfmstr said:
Great Krazy....
U r true krazy about technology......
To run emulators like SPB Mobile shell in best performance what should be optimum pagepool....
Click to expand...
Click to collapse
SPB Mobile shell is not an emulator, its a shell replacement which actually runs on the top of the existing shell32.exe shell. There is no extra page pool requirement for it to run. 6 MB would be fine.
Cab Maker
Useful application for Making Windows CE compatible cab can be found here: http://forum.xda-developers.com/showthread.php?t=400221. It can be used by developers as well as cook.... OOPS Chefs
Another alternate is http://www.ocpsoftware.com/downloads/cecabmgr/CeCabMgr_Setup.exe
Could any One tell me how to make my own package and add it to ROM while cooking , or the link that i can found this
I already use the tools that mentioned here but while cooking process going on it give me an ERROR ( I use the cooking way in -[TUTORIAL]How to cook for GENE-)
Thanks in advance
facing one problem in cooking a ROM...
every time i add a custom package ...and then i run "build OS" i get an error
"Error in building in default.hv and user.hv"
and i if remove the content of .rgu files from the custom packages it run fine..no issue...
i am using the "package-creator-v2.7" to create packages..i want to have some registry settings in ROM...
Please advice how to overcome this issue....
orange2784 said:
facing one problem in cooking a ROM...
every time i add a custom package ...and then i run "build OS" i get an error
"Error in building in default.hv and user.hv"
and i if remove the content of .rgu files from the custom packages it run fine..no issue...
i am using the "package-creator-v2.7" to create packages..i want to have some registry settings in ROM...
Please advice how to overcome this issue....
Click to expand...
Click to collapse
I do not have a straight solution for this, But here is what I did, I exported the registry key, saved it as rgu and then used package manager 5.4 to make it into a package.
Registry file is not properly formatted. Keep following points in mind :
1. Registry file (.rgu) must be in unicode format, not ANSI, which is the default saving format of Windows Notepad. You can change it in the save file dialog of notepad.
2. The file must begin with the word REGEDIT4 in the first line saperately.
3. There should be atleast one or two blank lines at the end of the file.
4. Entries in the files should be properly formatted. Following are the general values and their formattings that you will find in rgu files :
a. Path to hives must be covered in square brackets, ex : [HKEY_LOCAL_MACHINE\Software\Microsoft]
b. All string values must be formatted like this : "Name"="Value". If there is a file path inside the string, it should be having \\ instead of \ as separator. Ex: "FilePath"="\\Windows\\AudioManager.exe"
c. All DWORD values should be in this format : "Name"=dword:8 digit number. Ex : "BacklightOff"=dword:00000001
d. All binary values should be formatted as : "Name"=hex:v1,v2,v3,v4...... Ex: "AValue"=hex:00,00,11,01,10
Follow these guidelines and your registry file will compile fine.
Thanks a lot Krazy...thats a valuable information .... i ll check the rgu files ... correct them and give a shot.....
and thank you Addicted2xda for your inputs... i ll try this one also ..
Also please note, inside the dump folder, there is a text file that contains the error log. The last 2-3 lines of this file actually describes in which file the error occured. Actually the Windows Mobile Registry is compiled from rgu files using a program called rgucomp.exe and is stored in files ending with extention .hv. Just for your information
Good luck!
Related
The use of the Rom Kitchen is at your own risk!
Note: This is NOT for beginners, you need to have a good understanding of flashing G3/G4 prophets
This is NOT for answering or asking basic info, use the wiki/search for that.
Rom Kitchen Installation:
Download and install MS .NET framework 2 first
Extract the file ‘Prophet_WM6_RK_S-Core.rar’ anywhere.
The Folder structure will look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Extract ‘FlashOS.zip’ and ‘rgu-hv.zip’ anywhere.
Using the Rom Kitchen in Steps:
STEP (0): Making an OEM Package:(optional, more later)
This step is not necessary at beginning, unless you want to include new OEM Package in the OEM dir of Kitchen.
STEP(1): Run BuildOS.exe:
it will look like this:
Here you can select / de-select any packages you require.
Make sure you don't select too many or it will overflow the rom and you will get any error in the CreateRom.bat step.
Click the green button when you are done and it will create the OS dump.
If you get errors during this, it is probably due to duplicate files/modules in SYS and OEM dirs or due to bad registry entries.
If they occur, it has to be fixed by deleting duplicate files/modules (make sure you know what you are deleting) and correcting the registry (its hard to track registry errors, only change one package at a time).
If there are no errors BuildOS.exe will finish and prompt ‘Done’.
The temp dir will have dump,boot.hv,boot.rgu and log.txt
Do not delete any content at this point.
STEP(2) (a): Editing default/User .hv files:
This can be skipped, but all depends upon need.
This is needed for example when you need to ‘remove’ some reg entries.
For example see:
The base rom used in this kitchen is from the wizard, so we probably need this type of removal again.
To do it , copy default.hv and user.hv( user may not need both) files from dump created above to rgu-hv folder.
Run respective batch file to convert them in *.rgu files and rename *.rgu files to *.txt
edit *.txt files in notepad.
Remember these points:
--------(i)Turn off Word Wrap in notepad
--------(ii)1st line is blank line, type “REGEDIT4”(without quotes)on this line
--------(iii)Make sure last line is blank line
--------(iv)Files should be saved as Unicode not ANSI after editing
--------(v)HKCR & HKLM falls in default.rgu
--------(vi)HKCU and HKU falls in user.rgu
When saving *.txt files in notepad,
--------Select Encoding as Unicode
--------Select file type ‘all’
--------Rename as *.rgu
Now run respective batch file to convert *.rgu file back to *.hv files. Original *.hv files present in rgu-hv dir will be replaced by newly edited *.hv files.
Move new *.hv files back to dump folder in temp dir.
STEP(2) (b): Editing main initflashfiles.dat, why ? (Coming soon)
STEP(3): Run CreateRom.bat:
This batch file uses the dump dir., boot.hv and boot.rgu files to create the OS.nb file.
If there are no errors, the newly created OS.nb is placed in the temp dir.
STEP(4): Flashing the OS:
- Downgrade to AKU 2.2 first (wm5)
- Move your new OS.nb from the temp dir to the FlashOS dir and run UpgradeRom.bat
Screenshots:
Downloads:
PROPHET_WM6_RK_S-CORE
View attachment FlashOS.zip
View attachment rgu-hv.zip
View attachment Guide.zip
Updates:
#1 - 10/06/2007 Reduce imgfs size and put in more OEM/Files
(1)View attachment TOOLS+CreateROM.zip
Extract Zip and replace TOOLS dir and CreateROM.bat with old one in RK.
Modified File/TOOLS are optional, one can continue to work with old ones.
Info on Update #1
- Modified File/Tools repack imgfs block and hence OS.nb to reduced size!!
- Standard size of Shiped OS/Old cutom cook OS is 58368 KB(59,768,832 Byte)
- With the modified File/Tools new OS.nb can be less then 50 MB!!
- Hence its possible to include more OEM Packs and files untill the limit of 58368 KB
- Less imgfs blocks will not increase Storage.
- If OEM Packs/Files are deleted, initflashfile.dat must be edited, if not it will not boot properly
- Flashing reduced size OS.nb with FlashOS, may not prompt completion, so one has to wait as long as to approx 30 min or above to make it complete in hidden mode.
- If you add too many OEM/Files to the OS.nb greater than standard size without any error, but avoid such OS and dont risk ur device by flashing over size OS.nb
- experience with reduced size OS.nb - device switches off frequently after waking up, no other issue found yet.
Credits:
Mamaich,bepe and faria for base framework
Anichillus for base rom Core 2.n
Double_ofour for linux support
Zeusin/Smart1 for explaning ModelID
itsme and Tadzio for his tools
funman for the manual
And many others.........
Hi Nandlal,
Finally after a long wait... Am downloading it now, and will try it out asap. it looks grt and easy to use from what i can see. Thanks a lot for this, and hopefully we will have more custom stable roms coming out based on this RK
PS: SMART1 helped in figuring out the model ID.....so thanks to him
dmc3 said:
can this be use with smart1's???
Click to expand...
Click to collapse
its complete kitchen, u dont need any other rom to use with.
Kitchen uses anichillus's Core 2.n as base rom.
If u just use kitchen with all steps u will get a rom which looks as in post.
P4k1t0 said:
i forget to install it... i have formated my pc 2days ago
xD
Thankx for this pack nandlal_mk
It was good if it was more options to cook our proprly rom
Click to expand...
Click to collapse
Im still on improvement work, especially option to choose Language Packs via OEM packahe and more on registry changes, but the limitation is of time. I have free access to my PC only in night for 2Hrs
I answered my question by myself: it's explained in the PDF-File!
But I got another question:
Can I switch the Core-ROM? I'm customizing at the moment PDAViet 4.0.0.0.3 but I think it's not all to replace the OS.nb inside the Kitchen! Explain it please!
animelover said:
I answered my question by myself: it's explained in the PDF-File!
But I got another question:
Can I switch the Core-ROM? I'm customizing at the moment PDAViet 4.0.0.0.3 but I think it's not all to replace the OS.nb inside the Kitchen! Explain it please!
Click to expand...
Click to collapse
Hi animelover,
Nice to see u.
I have been out for some work and will complete remaining tutorial on first page.
Well, choice for Core rom just arises cuz i liked its speed and performence even when there is not much registry changes, i changed very little few reg to work with prophet, as it was consuming time of my work hour.
And its absolutely possible to port any custem rom to kitchen, that was my search which ends in a shape of this kitchen.
But as i stated in 1st post we should have a official WM6 for prophet then only the kitchen based on that will be perfect.
There is some inbuilt behaviour of BuildOS.exe, that it does not construct registry based on custom rom that has been ported to kitchen, rather it construct registry from deployed SYS/OEM structure.
Thats why when a custom rom ( say Smart1 v3 or any) ported in kitchen vanishes its customized registries on running BuildOS.exe, and newly created rom will have totally different registries than original one.
However original registries of custom rom r placed in SYS/Metadata but they r ignored during BuildOS.exe (Mods, please correct my findings if im wrong)
If there is a better chioce for a rom that should be ported, please mention, that will be ported in RK, but u know what i wrote above.
One has to make registry changes after BuildOS.exe to make rom more performative.
it looks promising,
when will tut on post#5 complete ?
Reduce imgfs size and put more OEM/Files
Extract Zip and replace TOOLS dir and CreateROM.bat with old one in RK.
Modified File/TOOLS are optional, one can continue to work with old ones.
Benefits & Facts of Enhancement #(1)
.....(1) Modified File/Tools repack imgfs block and hence OS.nb to reduced size!!
....(2) Standard size of Shiped OS/Old cutom cook OS is 58368 KB(59,768,832 Byte)
....(3)With modified File/Tools new OS.nb can be as less to 50 MB!!
....(4)Hence its possible to include more OEM Packs and files untill the limit of 58368 KB
....(5)Decrease in imgfs block does not grow Storage on flashed device.
....(6)If OEM Packs/Files r deleted, initflashfile.dat must be edited, if not then device could not be booted properly
....(7)Flashing reduced size OS.nb with FlashOS, may not prompt completion, so one has to wait as long as to approx 30 min or above to make it complete in hidden mode.
....(8)If too many OEM/Files included than these tools make OS.nb greater than standard size without any error, but avoid such OS and dont risk ur device by flashing over size OS.nb
....(9)My 2 days experience with reduce size OS.nb--- device switches off frequently after waking up, no other issue found yet.
Brakelseboer said:
This ROM is great. Beautifull bootscreen and finally sound for every tap, even the Start Menu.
One Problem:
When I change the backlight setting (everything off) and I switch off and on my device the backlight is gone. The only solution is to hard reset my device and set it up again. Is there a solution for?
Click to expand...
Click to collapse
there is no such problem on my device, but its possible different devices shows little variation in performence.
try using without backlight off setting or power offsetting for some time, i think it may help or remake-reflash in freash way.
im still on enhancement work, but with slow pace. However there is not much to change as base rom provided by anichillus is already superb.
But still i will post some more enhancement before reviving whole kitchen with any new good base rom.
Thread move to WM6 section, will update and clean later
Good work nandlal_mk
thanx for sticky
Jesterz said:
Thread move to WM6 section, will update and clean later
Good work nandlal_mk
Click to expand...
Click to collapse
Thanx Jesterz.
Its nice to see you again after a long time ( last activity 20-3-07 , i was eying/waiting to change it), really missing u all prophet forum user.
I need ur assistence, may i PM u later?
nandlal_mk said:
Thanx Jesterz.
Its nice to see you again after a long time ( last activity 20-3-07 , i was eying/waiting to change it), really missing u all prophet forum user.
I need ur assistence, may i PM u later?
Click to expand...
Click to collapse
Thanks ! and sure, give me a PM whenever
C ya
2 questions...
1. can i use this tool to cook ipaq rom?
2. if the pda has no phone function, how can i remove the phone module?
sorry i am newbie, pls bear with me if i asked silly questions
Anyone have the problem on the status battary?
nandlal_mk said:
Im still on improvement work, especially option to choose Language Packs via OEM packahe and more on registry changes, but the limitation is of time. I have free access to my PC only in night for 2Hrs
Click to expand...
Click to collapse
Please let me know if you need help for multiple lingual packs as I know japanese, korean and chinese. I still have the problem of doing a korean/japanese language rom. Tks!
Is there a way to convert OEM Packages into cabfiles that I can install like any other program?
OEM to cab
Infestor said:
Is there a way to convert OEM Packages into cabfiles that I can install like any other program?
Click to expand...
Click to collapse
I use this program for making cab files
Installation Creator
It's got everything you need
Just place the files in the right folder and edit the registry and go to build and your done
new core rom
I realy like to get a new core rom the one inside this kitchen is buging me.. as is restarts the prophet rapidly
Thanks gullum!
I only have some remaining questions:
First, is it correct, that the registry entries from the OEM-package are in the *strange-hex-code*.rgu? Do I need to enter this code anywhere? Is there a way to import this file directly into the Installation Creator or do I have to add the settings manually by editing the registry sections?
Second, how can I find out if there are any self registering or setup dll files that I have to specify during the setup process?
Sorry to bother you, if there is a thread or tutorial where this has been discussed before, just tell me which one it is.
I just downloaded the OEM.zip from the Wizard Forum and want to try some of the programs out.
Thanks again for your help!
PS: And yes, I have the same problems with the core here...my Prophet restarts every 10 inutes or so .
Help me
gullum; said:
I use this program for making cab files
Installation Creator
It's got everything you need
Just place the files in the right folder and edit the registry and go to build and your done[/QUOTE
Bro, thanks for the link but i dont really understand how to create cab file using this intallation creator tool but eager to try. I'm quite blur. Can you help me on this?
Click to expand...
Click to collapse
HOW To Make an OEM
Here is the tutorial for building an OEM, so, of course it can be used for any device,.
nb: try it at your own risk,.
OEM folder used as the place for any application that would be a default ROM application.
Here is step by step,.
1. Download & Install Hypercore Kitchen
2. Open Hypercore and go to panel/extra/CAB Analiser,.
3. Open or Drag and drop the .cab files that you would make it an OEM,.
4. Choose "XML" display then extract all cab files to a new folder,.
5. Go to "Registry tab", then copy all the registry setting from there, and paste to a new blank document
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. The registry setting is absolutely unusable, to make it usable, it must be edited like this,.
(Before edited)
REGEDIT4
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\WM5torage_Class]
"ActivateFlags" = dword : 00000000
"DeviceName" = ""
"NLEDWrite" = dword : 0000FFFF
"NLEDRead" = dword : 0000FFFF
"idVendor" = dword : 0000045E ---------------------------------------> There is a space between "=" and "dword", its Wrong,.
"ReadOnly" = dword : 00000000
"Dll" = %CE1%\WM5torage\WM5torage.dll --------------------------> It have only one slices, its wrong,.
"Product" = "Windows Mobile Device"
(After edited)
REGEDIT4 -------------------------------------------------------------------> There must be REGEDIT4 at the TOP
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\WM5torage_Class]
"ActivateFlags"=dword:00000000
"DeviceName"=""
"NLEDWrite"=dword:0000FFFF
"NLEDRead"=dword:0000FFFF
"idVendor"=dword:0000045E ------------------------------------------> Take a look at this, there should be no spacing inside the registry,.
"ReadOnly"=dword:00000000
"Dll"=%CE1%\\WM5torage\\WM5torage.dll -------------------------> If the keys are pointing to somewhere else, it must be two slice like this,.
"Product"="Windows Mobile Device"
--------------------------------------------------------------------------------> Leave one line empty at the BOTTOM,.
7. Generate GUID Name, (The generaor could be downloaded HERE)
8. Okay, save it in UNICODE encoding, using (Generated GUID Name).rgu
9. Make another blank document, and rename it with, (Generated GUID Name).dsm
(The generated GUID name between .rgu and .dsm must be the same)
10. Make a "initflashfiles.txt",. -------> (I give the tutorial below,.)
HOW To Make a initflashfiles.txt
initflashfiles.txt used to copy a file from specified location, to another specified location,.
Here is the step by step,.
1. Just make a new blank document
2. Save that document as initflashfiles.txt
What should you write inside initflashfiles.txt?? you should write this (below),.
The formula is:
Directory("DESTINATION FOLDER"):-File("DESIRED FILENAME","FILE SOURCE")
So, it will be like this,.
-------> Means that you want to copy the file named WM5torage.lnk in \Windows folder, to \Windows\Start Menu\Programs\System folder,.
There you go, you have one working initflashfiles.txt now,.
--- Finally, make it in one folder, and give it a name, ex: OEM_WM5torage ---
NB:
That you have to remember when you build an OEM:
a. There must be REGEDIT4 at the TOP
b. Leave one line empty at the BOTTOM
c. Dont use Wordwrap view
d. Save with (GUIDname).rgu and use UNICODE encoding
GOOD LUCK,.
Happy ROM Cooking to all of you,.
- Kumara -
I dnt know why the pictures are not showing??!!
I think this is the problem !!
When u want to put a pic , press on *insert image* and put a direct link
not IMG code or HTML code
ghostrecon2050 said:
I dnt know why the pictures are not showing??!!
I think this is the problem !!
When u want to put a pic , press on *insert image* and put a direct link
not IMG code or HTML code
Click to expand...
Click to collapse
Hi buddy, i put this picture from a direct link, it might be your internet explorer setting,.
But serialz got the same problem but in the Atom Cooking tutorial thread :
he said : "please update the pics too..it's much easy to do it with visual guide.."
May be it's our IE settings ?? I'm confused !!
ghostrecon2050 said:
But serialz got the same problem but in the Atom Cooking tutorial thread :
he said : "please update the pics too..it's much easy to do it with visual guide.."
May be it's our IE settings ?? I'm confused !!
Click to expand...
Click to collapse
Image updated, could you see the picture now??
Link Megaupload please!
Thanks
mykolor said:
Link Megaupload please!
Thanks
Click to expand...
Click to collapse
What do tou mean by link megaupload?????
BTW, could you see the picture of my post??
Garmin said:
What do tou mean by link megaupload?????
BTW, could you see the picture of my post??
Click to expand...
Click to collapse
All the picture #1 page is not showing.
I want to download your ROM by link Megaupload
Yes , Now I can see the pictures , TY Garmin <3
Hi Garmin,
Thank you for the tutorial to make OEM. wonderful!
Your tutorial is good for standalone .exe files
but if you don't mind if i ask about cabs?
I have a question about cabs files:
how to input serial number into the cabs registry for programs Cabs that has serial activation? so everytime i install it.. it doesn't need to enter serial?
for example: i need to put "modified cabs" to extended rom. so it will install by itself every time i do hard reset.
Thank you garmin.
sliders7 said:
Hi Garmin,
Thank you for the tutorial to make OEM. wonderful!
Your tutorial is good for standalone .exe files
but if you don't mind if i ask about cabs?
I have a question about cabs files:
how to input serial number into the cabs registry for programs Cabs that has serial activation? so everytime i install it.. it doesn't need to enter serial?
for example: i need to put "modified cabs" to extended rom. so it will install by itself every time i do hard reset.
Thank you garmin.
Click to expand...
Click to collapse
Every apps is different. So if don't know where a reg patch (sn. insert in registry), that's unable to create registry
Yup agreed with abusalza, every apps is different and they store their serial and reg key differently. i found some at the registry, and some on the file folder itself, some even encode them in the registry.
For me i key in the serial and search for it in the registry, den backup the key, and create cab for the registration and placing of ringtones and placing of shortcuts (for appz and games that installed on storage)
This ways saved me many hours when i will tryin to cook my own ROM or tryin out new appz
Just wanna thank Garmin for creating this thread and really helped me alot!!
thank very much bro!!!
ckaidi said:
Yup agreed with abusalza, every apps is different and they store their serial and reg key differently. i found some at the registry, and some on the file folder itself, some even encode them in the registry.
For me i key in the serial and search for it in the registry, den backup the key, and create cab for the registration and placing of ringtones and placing of shortcuts (for appz and games that installed on storage)
This ways saved me many hours when i will tryin to cook my own ROM or tryin out new appz
Click to expand...
Click to collapse
Backing up the key is one beautiful idea!
Thanks for the help!
sliders7 said:
Backing up the key is one beautiful idea!
Thanks for the help!
Click to expand...
Click to collapse
Try Settings Saviour. I haven't tried though, but it is supposed to that what you need.
@Garmin: good job!
ckaidi said:
Just wanna thank Garmin for creating this thread and really helped me alot!!
thank very much bro!!!
Click to expand...
Click to collapse
Thanks Bud,.
BTW, Sorry for not in the forum so often,.
My computer has just attacked by many variant of virusses, and it started with one of the thread here,.
Becarefull guys,. someone try to distributing a SPAM in this forum,.
Take care,.
Some appz and gamez include a setup.dll in the cab which insert reg values. Anyone know how to decode it? This will really help in building OEM
Thanks!!
ckaidi said:
Some appz and gamez include a setup.dll in the cab which insert reg values. Anyone know how to decode it? This will really help in building OEM
Thanks!!
Click to expand...
Click to collapse
hi ck..
try using ResHacker (google it),.
or try reverse mode (search it in the forum),.
gud luck,.
wrong post, sorry
HI!
when I want to copy registry values from Cabs Analyzer there is no values...
It is S2U2 Cab, and some others too...but when i opend HTC keyboard cab registry values are shown
i have been not in touch since i made rotorX
http://forum.xda-developers.com/showthread.php?t=349603&highlight=rotor
i was thinking of intergrating s2u2 and s2p into wm 6.1 into rotor wm6.1 ,if you have any possible links please for s2u2 1.01 and S2P-0.40
which are here http://forum.xda-developers.com/showthread.php?t=377627
and http://forum.xda-developers.com/showthread.php?t=377627
i would appreciate this help.
although i also needed touchflo which might be missing this time because its gone paid and oem might not be available for touchflo 2.7 .
p.s. integration of s2u2 1.01 and s2p 0.40 current versions into rom will be hot.
also many intelligent rommers might be making this by the time i am saying ,that will ease up my job to only downloading ,but my idea is to keep external rom free this time because then one cannot change dialpads and comm managers skins easily as it spoils device integrity.
i am still not sure yet but here are screen shots cause i have to do alot of homework.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
many methods exist ,what could be the best easiest way for making oem. asking the experts here.
The easiest way to create an OEM Package is using ervius package tool... (I've attached it below).
I'd check with A_C whether you can integrate the S2 apps within your ROM as some devs are fussy about that sort of thing...
For TouchFlo, you could integrate the free version of FTouchFlo from before it went comercial, or you could implement the original HTC Biotouch setup.
kamalneet said:
Click to expand...
Click to collapse
Sorry to go OT and be totally unhelpful, but what plugin is that below HTC Home? Is it a rlToday theme? I've been looking for something just like that, that has a few calendars.
What's the plugin with calendars? Looks like a rlToday plugin, but spent forever looking for one like that.
its modified rltoday clicking on it can display full calendar but i have disabled it and although it changes date everyday and R you see below it is prss reader for news rss feed ,
you have to uninstall any other rltoday before you install today.cab given here then you can latercopy themes as you do in rltoday or instal rip theme and put back in current rltoday anyway you like it to be.
The best for package creation is ervius package creator with MSCEInf (see atached file).
For S2[...] packege look into my attachment file too take it in your OEM folder and select packages in BuildOS (after replacing graphics if you want or/and the initflashfile.txt).
Good luck
ps.if you need more information PM me
With the initflashfiles above, all of the files are copied into the default directory. Because of the way S2U2 and S2P are coded, the files can reside anywhere, and so some of the lines in that file are unnecessary... I can create a modified one if wanted...
xvx45 said:
The best for package creation is ervius package creator with MSCEInf (see atached file).
For S2[...] packege look into my attachment file too take it in your OEM folder and select packages in BuildOS (after replacing graphics if you want or/and the initflashfile.txt).
Good luck
ps.if you need more information PM me
Click to expand...
Click to collapse
thank you .
l3v5y said:
With the initflashfiles above, all of the files are copied into the default directory. Because of the way S2U2 and S2P are coded, the files can reside anywhere, and so some of the lines in that file are unnecessary... I can create a modified one if wanted...
Click to expand...
Click to collapse
sure that will be expert solution
I'm going out very soon, but I should be able to do it later/tomorrow morning...
Maybe someone else can edit the file?
l3v5y said:
I'm going out very soon, but I should be able to do it later/tomorrow morning...
Maybe someone else can edit the file?
Click to expand...
Click to collapse
thanx ,me havin exams and alot of home work too lets see if i could build this before 17 may or i'll have to delay for more than 2 months by that time more advanced forms of s2u2 and s2p will come up.
I've just remembered I have exams too!
l3v5y said:
I've just remembered I have exams too!
Click to expand...
Click to collapse
we are in the same boat then ,but during exams our performances double in alternate areas ,actually i completely forgot how did i design rotorx back then now newer methods like neokit etc make it easy but i cannot concentrate properly like then.means multi tasking thread in my cerebal cortex seems to be working low this time unlike then.
another easy way coming in my mind was to take clean wpa2 cloudyfa rom and assing it to pick cabs from extrom and installing like default devices do but where in registry do i have to make that chage to modify autorun remains unknown due to lack of concentration.but for that i would need cloudyfa to give me permission to go ahead.
The cabs are all installed through the config.txt in the dump.
l3v5y said:
The cabs are all installed through the config.txt in the dump.
Click to expand...
Click to collapse
well thats called reigniting my sleepy ideas for better ,cloudyfa's clean edition config.txt says "EXEC: \Windows\SDAutoRun.exe " means i would have to now find config.txt of nvid wm5 to find what it used to do. so would try. well old prophet rom used to have autorun.exe ,install_tsk.exe and setup.exe well the rest are the cabs so my guess is something invoked setup.exe which then made run autorun.exe which then inreturn installed all the cabs (or viceversa)which were present on that extrom drive , but which was the file from mains drive who did this and if it was config.txt that means in my case command should be changed to
1. "EXEC: \ext_rom\autorun.exe"
2. "EXEC: \ext_rom\setup.exe"
3. none of the above because i am making a mistake which could be clarified by experts.
also \ext\rom needs to have proper name as in clean edition its named to \extended_ROM2 leaves me confused because some previous places it was named as \ishadow or \Extended_ROM\,it should have some default name leaves me confused.
main files gives error log of neokit "ImgfsToDump 2.1rc2
Cannot map file F:\OUTPUT~1\ROMDUMP\imgfs.bin" for nk.nbf of JAMin_WWE_213923_2139123_022021_ship.exe means it wont share files other that ext_rom which means deadlock to me as i will never be able to open it ,need reignition again.
it also would leave me with option to move back to UC clean option with oem packs where i was in my first post.
In the config.txt file, you'll need to add "CAB: \Extended_ROM2\...CAB"
for cabs (where Extended_ROM2 is the name of the extended_ROM).
In cloudyfas latest ROMs, it would be
CAB: \iShadow\test.cab
for a cab file called "test".
on cloudyfa's config.
It means that SDAutorun for UC would be run.
you can change it into this
Code:
LOCK: Enabled
[COLOR="Red"]CAB: \Extended_ROM\abcd.cab[/COLOR]
LOCK: Disabled
EXEC:\windows\SDAutoRun.exe
that means you can run some cabs fropm extended rom. The cab's name is abcd.cab
And SDAutoRUn( for UC ) will be running too later.
l3v5y said:
The easiest way to create an OEM Package is using ervius package tool... (I've attached it below).
I'd check with A_C whether you can integrate the S2 apps within your ROM as some devs are fussy about that sort of thing...
For TouchFlo, you could integrate the free version of FTouchFlo from before it went comercial, or you could implement the original HTC Biotouch setup.
Click to expand...
Click to collapse
Here you can find what you need:
http://www.pda4x.com/thread.php?fid=65
Could I point out that keygens are a form of warez, and that this forum is against the warez. I suggest you remove that link...
varanusvincent said:
on cloudyfa's config.
It means that SDAutorun for UC would be run.
you can change it into this
Code:
LOCK: Enabled
[COLOR=Red]CAB: \Extended_ROM\abcd.cab[/COLOR]
LOCK: Disabled
EXEC:\windows\SDAutoRun.exe
that means you can run some cabs fropm extended rom. The cab's name is abcd.cab
And SDAutoRUn( for UC ) will be running too later.
Click to expand...
Click to collapse
However, Cloudyfa has the Extended ROM called something else, so it would be
Code:
[COLOR=Red]SHOW:\iShadow\Background.BMP[/COLOR]
LOCK:Enabled
CAB:[COLOR=Red] \iShadow\[/COLOR]cabname.cab
[COLOR=Red]EXEC:\iShadow\CusTSK.exe \iShadow\theme.tsk[/COLOR]
LOCK:Disabled
EXEC:\Windows\SDAutoRun.exe
Code:
SHOW:
Allows you to show a background when customizing.
Code:
LOCK:
prevents users from running programs when the customization is taking place.
Code:
[COLOR=Black]EXEC:\iShadow\CusTSK.exe \iShadow\theme.tsk[/COLOR]
Allows you to install a theme of your choice. You will need CusTSK.exe and the theme file.
A little note, you should try and pad out the commands with " " (spaces) so that they are five characters long before the "\" of the file location. Otherwise, AutoRun.exe may have some trouble with the file
Code:
CAB: \test.cab
rather than
Code:
CAB:\test.cab
Well, now that my Raphael is finally coming to me, i'm going to put my attention here...
Like in the Kaiser forum, this is a team work with JugglerLKR.
First of all, give thanks to all ppl that contribute to this kitchen (read first post), and all of you that help to make better with your feedback and suggestions...
This is a adaptation from KaiserKitchen to Diamond and Raphael. So don't wait an spectacular GUI, is as simple as the first version, a script with the tools needed in a folder. This way we can upgrade individual tool when needed...
This is the v0.6 (second version for Raphael). I have rewrited the script in a single file starting with the Alex's modification over the original batch files from version v0.3 for Kaiser. (many thanks Alex's for his works over the original script...)
UPDATE: Kitchen upgrade to resolv issues with reconstruction process. Now version 0.61 works fine.
UPDATE2: Kitchen upgrade to make a better extraction process. Now the XIP part is taked out of imgfs part before cook. Tested and verified to work fine with a shipped ROM and with a reconstructed one. Modified the tool IMGFSFROMDUMP.EXE to allow more than 128Mb imgfs partition size. Added XVI32 application to edit the NBH file and modify the PagePool according this thread http://forum.xda-developers.com/showthread.php?t=430345. Version 0.62 uploaded.
The kitchen have three basic steps, first you need extract a base ROM to modify. Second you need to modify the extracted content (easy cause is package organized). Third you need to cook the modifications you did. The result of the whole process is a NBH file you can flash with RaphaelCustomRUU (included in the ROM). Of course you need the HardSPL before do this (not indluded in the ROM, you can get here http://forum.xda-developers.com/showthread.php?t=410150)
Now all functions are in one menu...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The first option allows to extract the XIP and OS content from a ROM (shipped or dumped) and make packages to make easy the next step...
Next image show the extraction menu with shipped and dumped ROM
Once you get the content extracted, you will have a set of folders inside the kitchen like the next image...
OEM folder have the OEM part of the OS. ROM folder have the original OS.NB file and XIP extracted part. And SYS file have the SYS part of the OS.
Next step is to cook the ROM after you have introduced the modifications to the future ROM. Next imagen shows the cook menu when you can choose Bepe's BuildOS or Ervius one.
Once you have finished with the cook step, you can flash the NBH file you will have in the kitchen folder named RUU_Signed.NBH.
In the (m) More Options menu you have the cooking process step by step if you want to take more control over the process...
This are basics steps, so feel free to make any recomendation, suggestion or any other question related to the kitchen that allow us to make it better.
Links to the Kitchen:
http://rapidshare.com/files/146058925/Raphael_ROM_Kitchen_v0.6.rar
http://rapidshare.com/files/147092569/Raphael_ROM_Kitchen_v0.61.rar
http://rapidshare.com/files/151114881/Raphael_ROM_Kitchen_v0.62.rar
Mirror: http://www.4shared.com/file/67398870/5d504a33/Raphael_ROM_Kitchen_v062.html
Read the TXT file inside to get the pass.
Waiting your feedback, guys.... thanks...
Cheers.
Post Reserved
[UPDATE 18-sep-08] Raphael ROM Kitchen
Here goes "old fashioned" kitchen, functional as well as above one, you can choose the interface you want to use.
Raphael ROM Kitchen - "just in case" edition.
It is slightly modified and updated well known Diamond/Kaiser ROM Kitchen to work with Raphael.
First backup everything and read "!!!readmefirst!!!.txt".
Thanks goes to
bepe
cmonex
dark simpson
itsme
jcespi2005
jugglerlkr
mamaich
olipro
pof
tadzio
theblasphemer
udk
and many others I forgot to mention...
http://rapidshare.com/files/133787810/JugglerLKR_Raphael_ROM_Kitchen_v0.5.rar
mirror:
http://vidmes.com/xda/raphael/Kitchens/JugglerLKR/JugglerLKR_Raphael_ROM_Kitchen_v0.5.rar
thanx TehPenguin!
remember, you need to flash developer edition unsigned HardSPL first:
http://forum.xda-developers.com/showthread.php?t=410150
p.s.: please test this kitchen on real devices and leave some feedback
p.p.s.: customruu.exe in this kitchen reported false positive by some anitviruses
thanx mrvanx & walshieau for reporting it.
yes, though custom RUU "should" be fine
please test updated Raphael kitchen on real devices and leave some feedback. but remember, that you need unsigned developer edition HardSPL - look here:
http://forum.xda-developers.com/showthread.php?t=410150
and some base rom here:
http://forum.xda-developers.com/showthread.php?t=410305
The customRUU in this kitchen MIGHT show up in AVG as a trojan dropper. Got assurance it is ok however.
Pain in the arse is you gotta disable AVG if you wanna run it, URGH!
i can also confirm and backup MrVanx! the CustomRUU "drops" the files outside of the exe, which can be seen as a Trojan File Dropper for people using AVG.
thanx, updated first post (i don't use avg)
is this a ROM of Raphael or just RUU.thanx
kkjjkkk said:
is this a ROM of Raphael or just RUU.thanx
Click to expand...
Click to collapse
Its a ROM Kitchen, to help develop ROMs. You need a ROM build like the ones posted here or a dump of your current ROM to make it work.
Mirrored: http://vidmes.com/xda/raphael/Kitchens/JugglerLKR/JugglerLKR_Raphael_ROM_Kitchen_v0.5.rar
- Enjoy!
small request for the kitchen guru's...
Hi All,
I'm a kaiser user who will be switching to the raphael!!
I used to do some amateur cooking for my kaiser. Just some finetuning of the roms for my personal taste...
I used Alex's kitchen to do so:
http://wiki.xda-developers.com/inde...ROM Kitchen Tutorial#Gatheringx20.Ingredients
In this kitchen there is a package-tool and also some other small but easy tools like a embedded pagepool changer.
When you use the kitchen for cooking it uses all these tools one by one.
A real heaven for nOOp's like me....
Is it possible to edit this kitchen for raphael to do the same things like the package tool and so on?
Thanks in advance.....
Now waiting for that raphael (touch pro)
merten3000 - i will try to update it for touch pro when i got real device...
JugglerLKR said:
merten3000 - i will try to update it for touch pro when i got real device...
Click to expand...
Click to collapse
thnx man! Appreciate it!!
Sound great because i'm am also a noob with rom cooking but i'm very eager to learn rom cooking.
"JugglerLKR merten3000 - i will try to update it for touch pro when i got real device... "
zal eens kijken in hoeverre ik dat in t nederlands kan vertalen
I sinned, so if any one else gets a stock NL Device don't forget to Dump it first.
Already playing with this kitchen and extracted rom but luckily nothing to flash on.
Maybe it's also a good idea to start an OEM Repository fairly early on so that it is set up and well known, from start.
I know it's not completely on Topic, but it's good that there's a little "Stilte voor de Storm" (Silence before the storm) moment where most users taking peaks here, are mostly already familiar with XDA.
Noonski said:
I sinned, so if any one else gets a stock NL Device don't forget to Dump it first.
Already playing with this kitchen and extracted rom but luckily nothing to flash on.
Maybe it's also a good idea to start an OEM Repository fairly early on so that it is set up and well known, from start.
I know it's not completely on Topic, but it's good that there's a little "Stilte voor de Storm" (Silence before the storm) moment where most users taking peaks here, are mostly already familiar with XDA.
Click to expand...
Click to collapse
Noonski which manual for dumping a ROM is the best to use. I'm a noob here but want to learn the tricks of the trade. I've seen many manuals but i don't know which one to choose from.
I've been using this kitchen to play around with ROMs etc, and have found the RomMaster included has problems dumping some Raphael XIPs. I replaced it with an alternative RomMaster, but thought I'd say here so people know...
l3v5y said:
I've been using this kitchen to play around with ROMs etc, and have found the RomMaster included has problems dumping some Raphael XIPs. I replaced it with an alternative RomMaster, but thought I'd say here so people know...
Click to expand...
Click to collapse
Yep the first go i had with the kitchen I found issues with the XIP, everything else was fine.
Titan Forever Beta 2 (WM 6.1 Build 21042)
This is a beta, which means there will most likely be bugs. Another note is that this is my first rom compilation I've done. Please post all bugs and the beta release that you are using. Please note the 1st boot will take about 3 minutes to load (the device did not lock) as programs are being installed in the background...
*Sprint Ready
*Advanced Configuration
*Camera 5.0 (Vogue)
*YouTube Player
*WiFiFoFum
*PocketRAR
*iContact
*Google Maps (Latitude)
*HTC Album
*Audio Manager
*Phone Codes
*Network Plugin
*Vibrating Dial Pad
*Microsoft Voice Command
Beta2 Changes
*Removed PIE Plus (caused IE to not work correctly)
*Removed non functional theme
22MB Free RAM on boot
Download: Titan Forever 1.0 Beta 2
---------------------------------------------------------
Known Issues:
---------------------------------------------------------
If anyone knows how to add cabs to BuildOS (not listed in a module) please let me know how to add it so I can add other needed apps
---------------------------------------------------------
Is there a way to extract a ROM w/ all settings as is on a phone back to the pc (after adding cabs and configuring the device)???
Suggested CAB Addons
This is reserved for cab addons until I can integrate them into the rom
-------------------------------------------------------------------
Device Update
A must have - Copy to any folder on PDA and run it 1 time and tell it to install update and adds to programs menu. This program provides a list of applications you can download from several catigories (Pocket Digital Clock is the clock I use under the "Today" catagory)Pocket Digital Clock
Quick Menu
Music ID
Sprint Only
Sprint Picture Mail
Sprint Navigation
Pocket Express
Screenshots (Titan Forever 1.0 beta 2)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great! I was just looking for something like this without M2D so I could run SPB MS3 on it.
By any chance, could you make it other carrier? or some how allow other carrier to install their own carrier .CAB?
tssi said:
Great! I was just looking for something like this without M2D so I could run SPB MS3 on it.
By any chance, could you make it other carrier? or some how allow other carrier to install their own carrier .CAB?
Click to expand...
Click to collapse
BuildOS doesn't allow for no carrier to be selected so I can't do just a no carrier however I believe you can still install your own carrier cab on top of the on that this puts to give you the right data settings... but don't quote me on that, just my assumption
kclubb said:
I believe you can still install your own carrier cab on top of the on that this puts to give you the right data settings...
Click to expand...
Click to collapse
Yes that is correct.
Thanks for the verify, just look up DCD Carrier Cabs, they're all around the forums... on another question, I am stuck on getting a SDConfig.txt to hit my rom, I got all other programs but that to work... and of course that prevents the caps in my \windows\ folder from installing :S
Any Ideas
Here man, about the UC autorun config.txt
Here is an example of how to configure UC autorun Config.txt
CAB: \Windows\XXX.CAB
LOCK:Enabled
CAB: \Windows\XXXXX.CAB
LOCKisabled
EXEC: \Windows\SDAutoRun.exe
Here is a breakdown on how it executes.
So Replacing the X's with the particular CABs you want to install automatically. In the example above how it would work is while XXX.CAB is installing the device is locked so you cannot interrupt the installation other than soft reset. Then the next thing it does is install XXXXX.CAB and while its installing the device is unlocked so you could go to the start menu, etc.. The last command it runs the EXEC: SDAutoRun.exe command is to RUN CAB's from your Storage Card
You can run as many CAB's as you like but remember it takes time to install them, and also if running them from device memory (windows folder) it basically doubles the space required as the cab will remain there unless you delete them manually or create a script to delete the cabs. You also have to issue a Lock disabled or enabled command for each CAB like above. Then put SDAutoRun.exe at the end like above.
I also believe Using UC autorun also runs the sometimes nasty CAB's hidden in the phones EXT ROM.
Hope this helps you.
BTW: Nice job on your ROM looks good. Also out of curiosity, how does the new PPC Builds work out? Stability, functionality etc..
Well, since this is my 1st ROM to make on my own, I had it knocked down to runny pretty good, but like reg tweaks (Pagepool) and customization is a tad of an issue
On another note, I had an SDConfig.txt file and told it to goto windows folder but when the rom was burned it was replaced w/ the default SDConfig.txt from the SDAutorun File
O, ok well I forgot to mention this should help.
Well I forgot to mention. I am assuming you are using the PPC Kitchen with all the files still RARed right? I am also assuming that you are using the SD autorun option from the Kitchen right? If thats the case then you can put the CAB's in any folder in the USER OEM folder and the CAB's will be copied to your windows folder. Otherwise you would have to edit the iniflashfiles.txt in the folder you copied CAB's to.
Now if you use the Kitchen UNRARed like me (requires kitchenconfig.txt edits etc..) then you can add/change anything you want without having to RAR it back up. It only makes the process cook a little slower but not a lot slower, and is a lot easier to change/merge new settings and packages.
Here is what you do for your Config.txt issue. If you use the default RARed up kitchen files you must Unrar (extract) the contents of PPC Kitchen OEM.rar and go in there and open the UC sdautorun folder. Now you will see "Config.txt" that is what its called, not sdconfig.txt. Make the changes to that file as described in my last post and save it. Now RAR the entire PPC Kitchen OEM folder so that it is a .rar file. and replace the old kitchen oem.rar with your edited one. Now re-cook.
If its still not working I zipped up an OEM package for you, all you have to do with this is Unzip it and copy the folder to your USER OEM folder in build os. Make your edits to the Config.txt like I explained in my last post. You can also put CABs in this folder, they will be copied to windows folder when cooked. Now make sure you UNCHECK PPC's SD Autorun, and then look in the OEM category and DCD SD Autorun will be in there to select. Now re-cook, you should have the tools needed for the job now.
I also included a Package Creator utility for you. Unzip it and put it anywhere you like on your Computer. Run the packagecreator.exe and then Choose where you want the package to show up in build os etc.. then select the CAB file. It will do its thing and then say "done". The OEM package will be in the same directory or folder as the CAB. You can then cut/paste the package into USER OEM folder in Build OS, and if you know how to edit the options.xml file for that package you can make it show up wherever you want in Build OS. Another note is when you make a package you may still have to look over the .rgu file and make changes/fixes. Also some CAB's use setup.dll's as well and the Package Tool will not work with those (will not copy the setup.dll or read its information) Most CABs dont have a setup.dll so thats ok.
I'll give it a go.
am getting 20ish free on boot with MS3
Dialer
a kind of important i found is the dialer i'm using appearently doesn't ring on inbound calls.. going to fix with standard vogue dialer and try again...
kclubb said:
a kind of important i found is the dialer i'm using appearently doesn't ring on inbound calls.. going to fix with standard vogue dialer and try again...
Click to expand...
Click to collapse
I noticed that too. I installed the titan OEM dialer from cab and it fixed the problem.