Hi guys, I've been reading many topics to "save" my original ROM that came with my HTC TP T7272.
I has already downloaded the itsutilsbin, made the 4 parts of de .RAW files usind "pdocreate" command, and continuing with the proceeding, I separated the Part01 and Part02 to use the Kitchen.
But watch happen, is that there is a part of the process that I have to download a "shiped" file.
"2. Download the WWE BaseROM to use in the reconstruction process here http://rapidshare.com/files/138980371/RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphae l_CRC_52.33.25.17_1.02.25.19_Ship.exe"
I downloaded it too, executed it, and It requires that I connect the phone to the activesync, so I connected and also it said: "NOTE: Making this process you will loose all your files and DATA" in red words
Wtf, I dont want to restart my phone, neither delete my files, I wanna ONLY make a backup of this, including the ROM, DATA, RADIO, all possible, because it I am using what I saw this "Kitchen".
The next step was execute the Kitchen's CMD, It said about "a base .NBH SHIPED FILE" ( I think It means some file of the step below ), asking for paste this NBH file on the BaseROM, that would go my Part01.raw and Part02.raw, to make it before execute the Kitchen.
So, I became afraid of loose all my phone's information and didnt make this .nbh, but I continued with the process, usind the Kitchen and making all, including the BuildOS.
But the RUU_Signed.NBH that was to appear didnt appear, only created some folders, and now I dont know what I do with the others files (Part00.raw and Part02.raw)
HELP ME, PLEASE
I'm already crazy
its so complicated!
unfortunately...
no helps
i would need it, but ok
I personally think you're putting in A LOT of effort, for little gain. Why not go download a stock ROM that matches the version of the one you got on your phone right now and be done with it ? Radio's are no special either... they can AAAAALLL be downloaded from this forum
basmareck said:
Hi guys, I've been reading many topics to "save" my original ROM that came with my HTC TP T7272.
I has already downloaded the itsutilsbin, made the 4 parts of de .RAW files usind "pdocreate" command, and continuing with the proceeding, I separated the Part01 and Part02 to use the Kitchen.
But watch happen, is that there is a part of the process that I have to download a "shiped" file.
"2. Download the WWE BaseROM to use in the reconstruction process here http://rapidshare.com/files/138980371/RUU_Raphael_HTC_WWE_1.90.405.1_Radio_Signed_Raphae l_CRC_52.33.25.17_1.02.25.19_Ship.exe"
I downloaded it too, executed it, and It requires that I connect the phone to the activesync, so I connected and also it said: "NOTE: Making this process you will loose all your files and DATA" in red words
Wtf, I dont want to restart my phone, neither delete my files, I wanna ONLY make a backup of this, including the ROM, DATA, RADIO, all possible, because it I am using what I saw this "Kitchen".
The next step was execute the Kitchen's CMD, It said about "a base .NBH SHIPED FILE" ( I think It means some file of the step below ), asking for paste this NBH file on the BaseROM, that would go my Part01.raw and Part02.raw, to make it before execute the Kitchen.
So, I became afraid of loose all my phone's information and didnt make this .nbh, but I continued with the process, usind the Kitchen and making all, including the BuildOS.
But the RUU_Signed.NBH that was to appear didnt appear, only created some folders, and now I dont know what I do with the others files (Part00.raw and Part02.raw)
HELP ME, PLEASE
I'm already crazy
its so complicated!
Click to expand...
Click to collapse
I think I understand the question. You do not want to execute the file, that will install it on your device. Get 7 zip (google it), install it on your computer, right click the file and will have options for EXTRACTING the file. Extract it to a folder of your choosing and inside will be the RUU_Signed.nbh your looking for. Then copy and paste parts 1 and 2 along with the ruu into your base folder rom inside the kitchen, and continue to follow the directions. Hope that helps
Related
Hi everyone,
I used ImgfsTools 2.1rc2 and NBHextract to successfully deconstruct a stock Sprint 6800 ROM image. I made my desired changes to the dump\OEM and dump\SYS folders (deleted items that I did not want) and am now trying to reconstruct the ROM.
The very first thing (as I understand) that you must do is to reconstruct the imgfs.bin file from the dump...
ImgfsFromDump.exe imgfs.bin imgfs-new.bin
It gets as far as...
ImgfsFromDump 2.1rc2
Using compression type 'XPR'!
Sector size is 0x800
Processing "OEM" as module
It runs for about 10-15 seconds then the irritating Windows "Error Report" screen that lets me know the application has crashed.
I've tried this on two different XP machines and on a Vista machine. Same thing... crashes after about 10-15 seconds.
I played around with PPCKitchen and DCD's kitchen, both successfully, and I know DCD uses ImgfsTools. The readme file in ImgfsTools is pretty well written and I followed them to the letter but apparently there's something I'm not doing right.
Oh, and I'll add that I tried to reconstruct the un-altered ROM and had the same problem... so I'm kind of ruling out that I removed something that I should not have.
TIA!
Joe
Ok, so I think I figured it out...
In the readme file, it recommends that you use Bepe's Packagetool, which I did. I apparently takes the contents of the dump folder and re-organizes it packages located in dump\OEM and dump\SYS. This is great because if I want to remove a package, I don't have to search the raw dump folder for GUID's and correlating files.
Problems is, ImgfsFromDump doesn't like the new directory layout. It appears to fail when it hits any folder with a sub-folder in it (which is what Packagetool does). So it appears I have to re-organize back to the orginal dump directory format.
Is there a tool that will do this? Been searching but no luck.
TIA!
Joe
I figured it out... needed to run BuidOS.exe and some other things.
UPDATE 12-21-08
There is some talk that you need to also install the Sdcerts cab before this process will work. Freezing the phone sucks so i would do this first. I will add it to page one.
After bricking my phone three times-I finally got it right. I have a HTC Touch Pro-nobody really explained it to me like I was a two year old-so I decided to break it down. You have to be careful or you will freeze up the phone and then be forced to hard reset. That sucks. So this worked for me. You should extract your own shellres.dll.0409.mui using rom extractor. This is not difficult if you follow these directions. All of the programs are free and I am making a zip to include them all. I included my own shellres.dll.0409.mui. The 0409 refers to the language. It is the code for English.
1. I installed the cab -icon demarrer. It makes a couple registry changes that help the process.
2. Then I used a the rom extractor to get my shellres.dll.0409.mui and copied it to the storage card you have to enter path:\windows\shellres.dll.0409.mui and save to \storage card\shellres.dll.0409.mui To install the Rom extractor You just put the Rom extractor into active sync
3. Then drag the file to the desktop of your computer use unsigner-just drag the file over the unsigner and it is unsigned
4. Then drag the same extracted file over reshacker and navigate the file to change string 321 in the shellres.dll.0409.mui to whatever you want it to say
5. Then open msigner and navigate to your saved file shellres.dll.0409.mui to resign the file
6. Then go to settings/today/items and uncheck to turn off touch flo and then copy the new file from your desktop to the storage card.
7. Install Total Commander on your device-you do this by opening it on your home computer. Then open total commander on your device and navigate to the new file shellres.dll.0409.mui-in the storage card. Then press the stylus on the shellres.dll.0409.mui file and save to clipboard
8. Then use Total Commander to search windows directory for the shellres.dll.0409.mui that is still in the phone. (If possible-rename the file shellres.dll.0409.mui.bak or if not possible press the stylus on top of the shellres.dll.0409.mui that is in the phone and selected for the drop down menue that appears-Paste Here.
9. Then soft reset. Here it is. I included everything you need in the Zip file! Here is where I started-but it is vague-great start icons in the thread though. http://forum.xda-developers.com/showthread.php?t=426264
The HTC start icon is on the zip entitled shellres.192.dll
Just say thank you if any of this helps you
language codes
Your can use the file I included in the zip if you do not want to extract. just change the numbers
shellres.dll.XXXX.mui in place of the XXXX It is 0409 for english-if you want another you can use one of these codes. If you don't have an htc touch pro the file may be named shellres.dll.96.XXXX.mui
0404 CHT Chinese Traditional
0804 CHS Chinese Simplified
0405 CSY Czech
0406 DAN Danish
0413 NLD Dutch
0409 USA English
0407 GER German
0408 ELL Greek
040b FIN Finnish
040c FRA French
040e HUN Hungarian
0410 ITA Italian
0411 JPN Japanese
0412 KOR Korean
0414 NOR Norwegian
0415 PLK Polish
0416 PTB Portuguese Brazil
0816 PTG Portuguese Portugal
0418 ROM Romanian
0419 RUS Russian
041b SKY Slovak
0c0a ESN Spanish
041d SVE Swedish
041f TRK Turkish
You can also change the Start Icon which is really cool. In my touch pro it is in file shellres.192.dll under icon group 4609-
1. Download shellres.192.dll to your storage card. Use total commander to search the windows folder for shellres.192.dll
2. Press the stylus on the file and select copy to clipboard
navigate with total commander to the storage card and press the stylus there and select "paste here"
3. Use unsigner to unsign the file
4. use reshacker to open the file and navigate to "Icon Group" 4609. You will see your icon in the program.
5. Select menu "Action" and replace. Navigate to the icon you want. Select it. Save the file.
6. Sign the file with the Msigner
7. Place the file in the Storage card
8. Use Total Commander to locate shellres.192.dll and rename it shellres.192.dll.bak
9. Use total commander to find your new file in the storage card, and move it to the windows folder of your device.
10. Restart with a soft reset adn enjoy your new icon.
Useful thread where I learned a lot http://forum.xda-developers.com/showthread.php?t=426264 You can get ready made .ico files here
Can you explain one point ... ?
I tried to extract the file shellres.dll.040C.mui (french WM6.0) directly into \windows, and before modifying the file with my computer, I just re-boot the device with that change (so, just a ROM file extraction but without any modification in the file) ... and then, the device is frozen on the Windows welcome page.
Can you explain that ?
louis09 said:
I tried to extract the file shellres.dll.040C.mui (french WM6.0) directly into \windows, and before modifying the file with my computer, I just re-boot the device with that change (so, just a ROM file extraction but without any modification in the file) ... and then, the device is frozen on the Windows welcome page.
Can you explain that ?
Click to expand...
Click to collapse
Did you follow steps exactly? You have to be careful. You can see from my screen shots that it works. I change my text every day as i feel. Did you install the icon demarrer cab?
you should also be able to navigate to the file shellres.dll.040C.mui (with Total Commander) and press the stylus on it and select copy to clip board. Then navigate to the storage card and press the stylus on a blank area and select copy here. The handheld needs the dll to work-so it is not removed from the device it is just copied.
Also make sure that your computers folders are set to view hidden files. It took me a while to get this right-and there is no step by step tutorial but the one i made here-from what I found.
Ok, but the result is the file shellres.dll.xxxx.mui in \windows
Whatever the handling, from the ROM to the SD card, to the computer, ..., the clipboard, ..., the file is finally copied in \windows
So, how can we explain that a direct extraction to \windows cannot work ?
Which operation in your process can avoid the problem ?
I don't want to modify the icon, just the text...
.. and I'm sure that works on your device, I have no doubt about that. I just would like to understand.
I also use Total Commander and it displays the hidden files.
What is the icon demarrer (french word ?) cab ? And what is the unsigner/signer method ?
louis09 said:
.. and I'm sure that works on your device, I have no doubt about that. I just would like to understand.
I also use Total Commander and it displays the hidden files.
What is the icon demarrer (french word ?) cab ? And what is the unsigner/signer method ?
Click to expand...
Click to collapse
The icon demmarer is a cab made by a developer. i included it, and all the necessary programs in the zip file. The cab just changes a few resgistry settings to allow this. (i believe) The file once copied to your computer can be manipulated and string value 321 changed-then compile script, save and sign. all included in the zip.
I want to know that you are able to do it, as I am.
louis09 said:
.. and I'm sure that works on your device, I have no doubt about that. I just would like to understand.
I also use Total Commander and it displays the hidden files.
What is the icon demarrer (french word ?) cab ? And what is the unsigner/signer method ?
Click to expand...
Click to collapse
I am having the same problem as Lewis and my device locked up twice at the windows login screen. You cannot modify the file with commander no matter what you do with your steps. There has to be something you left out. I am very good at what I do and am very far from being an ameteur
Chosen4Goodness said:
I am having the same problem as Lewis and my device locked up twice at the windows login screen. You cannot modify the file with commander no matter what you do with your steps. There has to be something you left out. I am very good at what I do and am very far from being an ameteur
Click to expand...
Click to collapse
Total Commander is only used to move the file-not modify it. Follow the steps exactly. Rename the old mui to mui.back.
and install the icon demarrer cab fisrt. Turn off touch flo before. I have a Sprint HTC Touch pro with a stock rom.
The cab demarrer may be strongly needed, or/and the unsigner/signer software ?
It should be useful to know what the cab and signer/unsigner do.
Which key in the registry is concerned ?
Is ResHacker needed ? Is ROM extractor not enough ?
And mainly, why does only an extraction to \windows freeze the device after a reboot ?
I'm trying to contact the ROM extractor developer VK (a.k.a. THEVK, GreateVK)...
louis09 said:
It should be useful to know what the cab and signer/unsigner do.
Which key in the registry is concerned ?
Is ResHacker needed ? Is ROM extractor not enough ?
And mainly, why does only an extraction to \windows freeze the device after a reboot ?
I'm trying to contact the ROM extractor developer VK (a.k.a. THEVK, GreateVK)...
Click to expand...
Click to collapse
You have to read this thread. http://forum.xda-developers.com/showthread.php?t=426264 Someone else made the icon dem cab. All I know is I read every page of every thread about this tweak-none was a road map-I just knew it could be done so I kept trying til I got it. I had to mod my start text from trying and reading. I finally got it with this method. the extraction alone will not freeze the phone-since the file is not removed from the windows registry. It is in fact not possible to remove shellres.dll.xxxx.mui since it is the entire shell of the phone.
Read every thread about start text
Ok, but the extraction will freeze the device if we do only this
So, this is the reason why the icon cab and/or one of the other operations avoid that.
Probably like Chosen4Goodness, I confirm that, if I extract the file and re-boot without any other change, the device is frozen...
freeze
Anxious to hear that someone other than me was able to follow these directions step by step and not freeze their device.
Don't worry, I'm probably not soo good !
or my device, or the WM version is too sensitive !
And it seems that many people succeeded ! There are a lot of evidences on this site.
louis09 said:
or my device, or the WM version is too sensitive !
And it seems that many people succeeded ! There are a lot of evidences on this site.
Click to expand...
Click to collapse
Be brave. Give it a go Louis!
louis09 said:
or my device, or the WM version is too sensitive !
And it seems that many people succeeded ! There are a lot of evidences on this site.
Click to expand...
Click to collapse
louis09 said:
I read in one thread how to change the word "Start". I tried to do it and I got a frozen device after reboot. So, a hard reset was needed. Another guy in this site got the same problem this week.
In fact, if I only extract shellres.dll.040C.mui (WM6.0 french version) to \windows\shellres.dll.040C.mui without any other change, I get the same problem.
So, maybe you can explain in more details how to do. Where to save the extracted file and to install at the end ? Is another operation needed ?
louis09
Click to expand...
Click to collapse
I couldn't send you a pm because you have your profile set to not accept incoming pm. Anyways, these are the steps that I follow to do this:
1. Extract shellres.dll.XXXX.mui via ROM Extractor;
2. Open it with ResHacker;
3. Look for String Table -> 321 -> Line 5120 and change this to whatever you want;
4. Hit "Compile"
5. Save the file. At this point, you will have two shellres files - one of them will have "original" in the file name. Just save that one in case you want to keep it.
6. Transfer to device via ActiveSync (USB, I haven't tried any other connection such as BT, Wifi, etc) into \Windows
7. Soft Reset your device.
How are you doing the transfer back to the device? It might be that the file is not transferring completely to the device, or getting corrupted in the process. TotalCommander, and Resco have not worked for me for this purpose. Give it a shot and see if it works.
Good luck and let me know how it turns out.
Ok, I have modified my profile.
I need a precise information about the location "Save to" in ROM extractor.
Because doing only that, to \windows\shellres.dll.040C.mui (the same file location than the ROM), is enough to freeze the device after a reboot !
So, why ?
I tried only that "simple" operation because I tried the 1st time the complete one (modify the file and transfer to the device) and I got the same problem. I believed that was due to the change in the file but the extraction is enough.
Maybe we have not to extract in \windows ?
louis09 said:
Ok, I have modified my profile.
I need a precise information about the location "Save to" in ROM extractor.
Because doing only that, to \windows\shellres.dll.040C.mui (the same file location than the ROM), is enough to freeze the device after a reboot !
So, why ?
I tried only that "simple" operation because I tried the 1st time the complete one (modify the file and transfer to the device) and I got the same problem. I believed that was due to the change in the file but the extraction is enough.
Maybe we have not to extract in \windows ?
Click to expand...
Click to collapse
My quesstion is why the reboot after extraction to save to \storage card\shellres.dll.0409.mui?
Also I think the last post above yours neglected to unsign and resign the file. I have fund that improper signing causes a freeze.
I know it is damn tricky since I froze mine three times, prior to doing it this way. Let me know how it goes.
I have no storage card. I reboot because I often close the device.
Could you explain the sign/unsign method ? That seems important as you say !
Which tool we have to use ?
louis09 said:
I have no storage card. I reboot because I often close the device.
Could you explain the sign/unsign method ? That seems important as you say !
Which tool we have to use ?
Click to expand...
Click to collapse
The programs are in the zip. But I think you need a storage card. That way the Mui file is extracted to something other than the phone itself. Get a storage card and then try it. They are not expensive.
Once extracted to storage drag the file on top of the unsign icon-it will flash and that is it. It is unsigned. Then open reshack and change out the word "Start"
compile script
save
Now drag the file over the msigner.
You will have to tell the program where to find the file through the interface of the msigner program.
It will sign the file and then you will have two shellres files. One will be shellres.dll.xxxx_original.mui or something like that. That is the old file.
place the new signed file in your storage card.
then follow the rest of the directions
I am not responsible if you screw up your phone use at your own risk blah blah blah
thanks to everyone who build the tools were are using today
ok sooooo this is how it goes
step 1: place the nbh file in the root of the "ralphael rom tools" folder
step 2: run "dump.bat" file (found in root of folder)
step 3: click "decompile NBH file" (it will ask you where the nbh file is. Point it to the right folder which should be the "ralphael rom tools" folder then it will ask you where you want the windows.nb file to go also point it to the "ralphael rom tools" folder
step 4: after its done which is denoted by "...Done?" at the bottom of dutty's nbh tool, make sure that you see a windows.nb file, if you do then click close out of dutty's nbh tool but leave open the dos windows as the rest of the bat file will now run.
step 5: when it is all done you will see a dump folder change what ever you want in there and when you want to test your new rom click on the "rebuild.bat" file.
step 6: click on the "Create Ralphael NBH" folder then click on htcrt.exe then click build then click device.... if you want to enter a version number you can, it can also be words if you want. then click on the "..." by where the "OS" is and direct it to the "ralphael rom tools" folder where your new windows.nb file is and lastly click build in the lower left hand corner name the file what ever you want and your done.
step 7: loading a new rom..... first make sure there is only one nbh file in the root of the "ralphael rom tools" folder then connect your phone to the computer then click on the "customRUU.exe" file and follow the directions....
there are other tools but i am not going to go over those but if you search im sure will will find lots of info on them
good luck and if you have any question about anything myself or someone else will answer
http://www.megaupload.com/?d=2KRHZ7NB - i would have just uploaded it to wiki but it does not work
Can you tell me what i can change in the dump map? Great Tutorial so far.
mattblack85 said:
Can you tell me what i can change in the dump map? Great Tutorial so far.
Click to expand...
Click to collapse
everything.... you can change files, change reg entries via .hv files and change where files and shortcuts go in the initflashfiles.dat file
Hi All,
with all of the kitchens found here, it is noticeable that when adding any packages to the OEM/SYS folders (i.e S2U2) then trying to re-build the rom specially in the process of BuildOS we got many errors that file already exist and then crashes.
after many research i got to know that the package will extract the files in windows folder for all packages on time then while installation, the files will be copied to the proper folders.
here is the problem, once trying to re-build the rom all files will be copied in the same folder.
is there a way to avoid this?
Hi robekia1,
Even I am facing the same problem when rebuilding os.
we will keep waiting for the seniors here to deliver a solution for us.
thanks to whom will help in this regard
I also faced this problem while cooking ROMs, Hey krazy! help please.
I guess, if we could know the file structure from the folder structue before installing, then it would be easy.
hmmmmmmmm, it seems that this problem have no solution as (Finding emulator for cooked ROM)
done the same and working
robekia1 said:
I guess, if we could know the file structure from the folder structue before installing, then it would be easy.
hmmmmmmmm, it seems that this problem have no solution as (Finding emulator for cooked ROM)
Click to expand...
Click to collapse
Hey I have done the same previously I love the s2u2 applications so I have cooked my rom with all 3 apps of s2u2 i.e. S2U2, S2P, S2V.
I created packages from package builder, then copied all files to one folder.
removing duplicates with latest one.
Also I changed the initflash file for the locations which is created by the package creator with the new folders path.
Then also I added the all item tag in XML to detect DSM files of the respective apps.
Make sure you have registry hack for installing third party apps in your ROM packages.
Enjoy... you will get all your S2U2 apps in your ROM.
Right now I dont have the folder I will upload it tomorrow if anyone wants.
Hope this information is useful to you all.....
Please Dooooooo
bhushangahire said:
Hey I have done the same previously I love the s2u2 applications so I have cooked my rom with all 3 apps of s2u2 i.e. S2U2, S2P, S2V.
I created packages from package builder, then copied all files to one folder.
removing duplicates with latest one.
Also I changed the initflash file for the locations which is created by the package creator with the new folders path.
Then also I added the all item tag in XML to detect DSM files of the respective apps.
Make sure you have registry hack for installing third party apps in your ROM packages.
Enjoy... you will get all your S2U2 apps in your ROM.
Right now I dont have the folder I will upload it tomorrow if anyone wants.
Hope this information is useful to you all.....
Click to expand...
Click to collapse
Thnx a ton budy for this information.
really, i can't wait till tomorrow for this folder because i want to see all these modifications whitch greatly will help all ppl here.
please upload it ASAP.
also, what about Cooked ROM emulation? i hope there is a solution up there whitch i'm not aware about.
registry hack
bhushangahire said:
Make sure you have registry hack for installing third party apps in your ROM packages.
Click to expand...
Click to collapse
What you mean by registry hack? it sounds something new for me.
do you mean any registry editor? or it is another OEM Package should be installed along with the ROM?
robekia1 right, all file will be in windows folder, if you put it in the "program files" folder, the files exist in windows folder too, that is will be wasto your phone storage. Avoid put in the program files folder will be increase your phone memory.
Usually the default directory of the CAB file is in the progam file, and if you use OEM creator to that CAB, it will copied to Program file folder and exist in windows folder, to make only in windows folderyou can use this method:
1. edit the initflashdat result of OEM creator, delete all value of program file, or
2. Before you use OEM creator, edit the installation directory of CAB file, use wincab manager to do it, or
3. use wincab manager to extarct the files in the CAB, and registry, after that you can make .rgu, dsm, shortcut, manually and input the shortcut location in the initflash.dat file (I always use this method).
Usually every CAB file have different files with other, and if the have same file it can be same with the SYS file or the author/maker of the CAb is same. you can choose the latest version of that file if it happend.
While cooking even though we separate files inside different packages, but at the time when imgfs.bin is created, all the files go to \Windows folder. Thats why there cant be two files with same name even when they are in different packages.
Now some apps have common dependencies. Like the DirectShow and mHubVO dlls are needed by Youtube, as well as streaming media. Now what happens is, if you take two packages for these, sometimes the author puts the dependency files in both the packages so that if someone uses one package and not the other, it still works. This mostly happens packages that are made by converting a cab to a package. So if you cook these packages, you need to make sure that they are not putting duplicate files.
The same thing also happens with also happens with registry settings. Somtimes, two or more packages update the same regisrty keys in their .rgu files. SO we need to take care of those too and remove the lines that dont apply to the version of files we are actually using in our kitchen. This is a necessary evil and thats why cooking is not a child's play.
Once a ROM is flashed, and phone boots for the first time, the initialization process takes place. Now the ROM cooks have two ways to initialize their packages : using the .provxml files, this works if you have newer OEM* folders like from Elfin or Opal, it basically requires the Autoshortcut.exe file as well as newer HTCUtil.dll. The other way is the older initflashfiles.txt files inside the packages.
The difference between two methods is that using initflashfile.txt you can only copy files and create folders on the file system, but provxml can be used to perform many different things like registry values, applying themes etc.
So using one of the methods you copy your files to appropriate locations. Do remember that this process if done wildly can decrease the availabel free phone memory noticeably. Thats why we sometimes go a bit furthur and do some programming stuff to minimize this. You people sometimes dont even notice what is happening behind the scene.
I tell you one such experience. Google maps is a package that copies all its files to \Program Files\GoogleMaps but i noticed if i dont copy the files by deleting the initflashfiles.txt, and run GoogleMaps.exe from \Windows, it runs just fine. This works in pro user's rom but in Manila ROMs, the Maps tab of Manila looks for GoogleMaps.exe in Program files folder. So i had a choice to either copy googlemaps.exe into program files folder and waste 2 MB of phone memory or loose the functionality of maps tab of manila.
What i did was the third way i thought of myself. I created a .NET application called GoogleMapsStub.exe and what it does is it runs the googlemaps.exe from windows folder and passes all the information to it that manilla passed to it while running it. This exe is copied into the \program files\GoogleMaps folder by using initflashfiles.txt as GoogleMaps.exe. So now manilla is happy that it has googlemaps.exe in its proper place and i am happy too coz the new exe is only 3.5 kb in size You can verify this in v3.1.1 of VanillaManila rom. Look in the program files folder you will get the 4 kb googlemaps.exe, put it on your pc and check its version in its properties, you will get my name there And if you check the windows folder, there will be a googlemaps.exe of 2 MB size and a GoogleMapsStub.exe of 4 kb size.
So sometimes hacks like these are necessary in order to make a perfect roms. ROM cooking is just like food cooking, It may appears to be like just putting the ingredients into a cooker and light up the gas stove and wait for the food to cook. But if you try that for first time, your food will not be eatable for sure It requires a careful balance of salt, pepper and other things to cook a tasty dish I hope i have made myself clear
Wonderful
AMAZINGGGGGGGGGGGG PPL
latest buildos/ visual kitchen has option to delete duplicate file while cooking but
i will make new kitchen in future (not soon) because current kitchen work fine for me and i have lots of other work like android + building to rom from weekly leaked sys of wp 6.5
Thanks ankit360 for the visualkitchen9.7, i'm already trying to use it but the problem is: the ROM generated by the kichen is not working for GENE.
i tried another kitchen for the same ROM and it still working fine, the only problem with it is the duplicate
bhushangahire, i'm still waiting for you to upload your files.
also, what about the reg hacker?
Hi Karzy,
" What i did was the third way i thought of myself. I created a .NET application called GoogleMapsStub.exe " you answered one of my query unknowingly, when I had extracted your ROM, I saw there was GogleMapsStub.exe which was not present in any other ROM I had extracted. So I was wondering what that file was about !!! Now I know what it was.
Thanks a lot karzy for sharing this info.
You have been always good in explaining things indetail, which helps a lot for new comers like me.
I m glad that i am able to help my buddies here.
find the files below...
robekia1 said:
bhushangahire, i'm still waiting for you to upload your files.
also, what about the reg hacker?
Click to expand...
Click to collapse
Please find the files below sorry for delay.....
S2U2 Application OEM folder.
S2APPS.7z (786.47 KB)
Registry Tweak OEM Folder.
Registry__Disable - Security warnings when installing non-certified application.7z (849 bytes)
Please find the link to ROM with S2U2 applications + Antivirus.
WM6.5_Old_21231.7z (51.91 MB)
bhushangahire said:
Please find the link to ROM with S2U2 applications + Antivirus.
WM6.5_Old_21231.7z (51.91 MB)
Click to expand...
Click to collapse
i guess this ROM is for OLD gene???Correct me if i'am wrong...
yup for old
htc3400 said:
i guess this ROM is for OLD gene???Correct me if i'am wrong...
Click to expand...
Click to collapse
yup you are right this rom is for Old ..
If anyone want it for new gene please ping here I will cook it for new also....
Thanks
bhushangahire said:
S2U2 Application OEM folder.
S2APPS.7z (786.47 KB)
Registry Tweak OEM Folder.
Registry__Disable - Security warnings when installing non-certified application.7z (849 bytes)
Please find the link to ROM with S2U2 applications + Antivirus.
WM6.5_Old_21231.7z (51.91 MB)
Click to expand...
Click to collapse
Thanks a Ton bhushangahire for sharing those links.
I appreciate this.
Now, i'm gonna read them character by character
Ok, so here's what I'm trying to accomplish.
I can't stand having the awful standard alarms/notification sounds that are provided on most WM roms, so I went and redid one. The attached file is a Windows notification sound that I've renamed and converted to work on my topaz in place of "alarm2", hence the filename.
In short, I don't want to have to use total commander winCE every time i flash and want to change that file out (I can't overwrite it using windows explorer or file explorer cuz I can't overwrite system files). So i had an idea.
I figured I'd make a .NBH file to flash to the device after I flash my rom on there that ONLY replaces that sound file with the new one (Eventually I'd like to incorporate my custom splash screens into it but that's only a thought at this point). This is where my question/problem comes in...
I've looked around on the forums for some type of "rom builder" or .nbh creator or utility, and I've found alot of things that will convert .nb into .nbh and other features, but nothing that seems to do what I'm wanting.
I'm NOT a developer really; im more of a concept person, and if I can accomplish this without having to learn a language all the better, but I'm not sure where to start with this.
Sorry about the long post, and thanks in advance for any help you can offer!
Hi,
what about using sashimi or UC? this would save you a flash...
you can automate the process. that's what i do when i flash and i want to get back the ringtones.
good luck
Use total commander. it will let you overwrite system files and files that are in use.
Solarenemy68 said:
Use total commander. it will let you overwrite system files and files that are in use.
Click to expand...
Click to collapse
Yea, that's what I've been doing so far... It's still kind of a pain waiting for the Windows folder to load and then replacing it (It can take awhile)... I should've mentioned in the first post that it was an alternative to this that I was looking for, and either a .nbh file or possible a cab file, though I can't see how a cab file could accomplish this since it's replacing a system file while it's in use...