Hello,
Is it possible to use the 1.90 Olinex on my HTC Touch Pro whit SPL 5.05.0000
This give's the infomation screen(4color screen):
RAPH100
SPL-5.05.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
Thanks en Cheers
Yes you can. Majority of the people out there have that hard spl on there. There was a problem on the tilt forum where you needed the preferred SPL for the rom you are using. The situation they had was recieving certain lag, which is a case that I experienced. With the 5.05 rom and 1.90 HSPL, I don't notice that effect.
yes i have the same. you can use it
hmm He gives an error over and over
As far as I know, the 1.90 SPL is the ONLY one available for the Raphael.
htcfan78 said:
As far as I know, the 1.90 SPL is the ONLY one available for the Raphael.
Click to expand...
Click to collapse
Hey htcfan78,
The Touch Pro is Raphael, i use the 1.90 Olinex before i send my phone to a repaicenter of HTC (eurotwice).
oifrankoi said:
Hey htcfan78,
The Touch Pro is Raphael, i use the 1.90 Olinex before i send my phone to a repaicenter of HTC (eurotwice).
Click to expand...
Click to collapse
I would suggest that you switch back to the stock SPL before sending it in for repairs. I stand corrected, 1.90 Olinex is not the only SPL. There is also the stock. However, for installing cooked ROMs, I believe that it is the only one.
htcfan78 said:
I would suggest that you switch back to the stock SPL before sending it in for repairs. I stand corrected, 1.90 Olinex is not the only SPL. There is also the stock. However, for installing cooked ROMs, I believe that it is the only one.
Click to expand...
Click to collapse
I'll switch back to the stock spl but eurotwice put the newest software on your phone, and no i can't the Hard-spl.
Hi!
I just wanted to know after i installed my custom rom which is based on 5.05 xip can i install the original 5.05 SPL back i got fizzy screen problem and my screen allready been changed so there is something wrong.
So i just asking can i put back the 5.05 SPL for my 5.05 cooked rom without bricking my device is gonna be Original SPL cooked rom and changed radio...
Thx in advance.
and sorry for that i cant find any answer....
Related
Hi there,
My X7500 internal GPS seems to have a defect. The slightest touch makes it lose it's fix as if there's a loose contact. My x7500 is SuperCID (IMEI-Check) and has OliPRO hardSPL.
Is there a way to downgrade to the latest WM5 version prior to me sending it back to HTC for repair?
Cheers
I can confirm that with superCID and OliPRO I haven been able to succesfully up&downgrade back & forth between WM5 and WM6
FYI
With one exception. When going back to WM6 I lost my radio 1.45 in the process. I was stuck at 1.38, and upping to WM6 did not bring back the later radio stack.
*Update* Olipor's unlocker nicely took care of that. I now actually managed to combine rom 2.20 and radio 1.47. Thx Olipro for a helluva job building the unlocker! The only thing now is to see whether radio 1.47 improves some of the GPS reception. If not, it's down to WM5 and back to HTC with this puppy.
Do you have the unbranded version of X7500?
Which ROM did you use to go back to WM5?
I have the HTC Generic X7500 (originally Dutch). I used RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe to go back to WM5, but the prerequisite is OliPRO *and* superCID.
OliPRO's unlocker will do that for you and gets you these two prerequisites.
Wiz said:
I used RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe
Click to expand...
Click to collapse
where i can get this WM5 ROM ?
Wiz said:
I have the HTC Generic X7500 (originally Dutch). I used RUU_Athena_HTC_WWE_1.25.405.2_1.38.00.00_Ship.exe to go back to WM5, but the prerequisite is OliPRO *and* superCID.
OliPRO's unlocker will do that for you and gets you these two prerequisites.
Click to expand...
Click to collapse
Thanks!
haim said:
where i can get this WM5 ROM ?
Click to expand...
Click to collapse
You can download it from the xda ftp.
O.K Thanks!
Hello
I would like to try some custom ROMs, but since my Touch Pro already had some problems with the stylus sensor, I don't want to lose the warranty. I dumped the ROM and splash screen, but I have some older SPL version -1.69.0000. Is there a way to extract SPL? I can't find it anywhere
Thanks in advance.
m2c said:
Hello
I would like to try some custom ROMs, but since my Touch Pro already had some problems with the stylus sensor, I don't want to lose the warranty. I dumped the ROM and splash screen, but I have some older SPL version -1.69.0000. Is there a way to extract SPL? I can't find it anywhere
Thanks in advance.
Click to expand...
Click to collapse
You will have to get the shipped ROM by your carrier and dump the SPL from there. You can't dump your SPL from the Image on your device.
Thanks
Dave
If you will find some solution, please post it here
I have the same problem. Thanks
It would be helpfull if you mentioned your carrier and whether its a TP or fuze. Its easy to get the spl if you know which rom came on the device.
its mda vario iv (branded htc by t-mobile).
i've found something:
Code:
SPL dump for raphael:
pmemdump 0x88000000 0x80000 spl.bin
Will be this useful? Or is there any other way?
dewil9 said:
its mda vario iv (branded htc by t-mobile).
i've found something:
Code:
SPL dump for raphael:
pmemdump 0x88000000 0x80000 spl.bin
Will be this useful? Or is there any other way?
Click to expand...
Click to collapse
jcespi2005 said:
The reconstruction process can be done only for the OS part...
You can't extract the radio or SPL from the device, you need a shipped ROM to get this two parts.
Cheers.
Click to expand...
Click to collapse
You can only get spl if there is a shipped version of that rom.
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say.
aruppenthal said:
There should be a way if there is a shipped version of that rom.
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say. I need to be sure to get the right one.
Click to expand...
Click to collapse
EDIT:
@dewil9
Actually, what SPL are you after?
Ta
Dave
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say.
Click to expand...
Click to collapse
about:
CE OS 5.2.19965 (Build 19965.1.2.3)
tricolor screen:
RAPH300
SPL-1.69.0000
MicroP-Herm (LED) v 13
MicroP-Herm (KEY) v5
PSOC-Herm STAGE_CVT v0x35
dewil9 said:
about:
CE OS 5.2.19965 (Build 19965.1.2.3)
tricolor screen:
RAPH300
SPL-1.69.0000
MicroP-Herm (LED) v 13
MicroP-Herm (KEY) v5
PSOC-Herm STAGE_CVT v0x35
Click to expand...
Click to collapse
There is a German T-Mobile ROM on the Wiki with 1.69 as the version. Download it and use NBHExtract to Dump the SPL from it.
Ta
Dave
I am from Slovakia, and language of whole OS is english.
Is it ok?
dewil9 said:
I am from Slovakia, and language of whole OS is english.
Is it ok?
Click to expand...
Click to collapse
No, it doesn't matter Raphael SPL 1.69 is the same from any country.
Ta
Dave
Thank you very much
DaveShaw said:
There is a German T-Mobile ROM on the Wiki with 1.69 as the version. Download it and use NBHExtract to Dump the SPL from it.
Ta
Dave
Click to expand...
Click to collapse
It appears the one in the wiki is a reconstruction and does not contain spl
You should be able to use HaRET to dump SPL from RAM at runtime. SPL is at physical address 0.
With RAM protection implemented in Diamond/Raphael/Kovsky/Blackstone it is quite unlikely that SPL in RAM will be different from SPL in NAND, however still possible. Since there's no SPL 1.69 in circulation, you can't verify how accurate the RAM dump is. Someone could dump a known SPL version this way and then confirm the files are identical when extracted from .nbh and dumped from RAM.
One more question... probably stupid one...
I downloaded this german rom, but I don't know howto extract spl from it.
I know with nbhextract, but how exactly?
Can somebody help me? Thank you
dewil9 said:
One more question... probably stupid one...
I downloaded this german rom, but I don't know howto extract spl from it.
I know with nbhextract, but how exactly?
Can somebody help me? Thank you
Click to expand...
Click to collapse
Is the one you extracted an official rom or the rebuild from the wiki?
The one in the wiki does not have the spl in it.
Ah I thought tha roms on wiki are shipped one...
So still no 1.69 spl??
Stock SPL 1.69.0000
For all guys looking for stock SPL 1.69.0000, here is one i have already extracted from czech T-Mobile ROM. So we have done one thing Another things to do is to make one single NBH file with stock SPL and one NBH file with OS, Splashes and stock Radio without SPL. That is what i have not understand yet very well, but i got kitchen and i want to flash new ROM early
Thanks for the SPL - same as on my UK T-Mobile Vario IV.
Now i can restore to factory settings - time to play!
Stock SPL not changing version numbers
I've tried searching the whole net already but I couldn't find it.
Something screwed in my screen and I want to turn it in for warrenty.
Now I restored my ROM/Radio already but when I try to restore Stock SPL (doing it when in USB mode) and it goes to 100% in a few secs it still says 1.90 Olinex.
Anyone got a solution for that?
Kind regards,
Kenny
is there a 6.5 rom thats radio and ipl spl free that i can put on my g4 without updating its ipl?
any help would be appreciated thanks
d3aded said:
is there a 6.5 rom thats radio and ipl spl free that i can put on my g4 without updating its ipl?
any help would be appreciated thanks
Click to expand...
Click to collapse
Yes, I have a G4 and have tried Both the CR86 and XDA2 ROMs.
These days nobody is including IPL/SPL in their builds, for just this reason (most of the working Wizards are now G4s, I suspect).
Just cruise the Wizard Mobile 6 boards and read up on each ROM. Try several. Remember to flash back to default ROM between home-cooked ROMs to prevent Extended ROM corruption.
upgrade to 6.0 or 6.5
hi, this is the specs of my phone aku 2.3 IPL 2.28.0001
SPL 2.28.0001
OS 02.25.11
GSM 2.26.10.2
wizard love
i wanna upgrade to one of the new 6.0 or 6.5 beautiful grapic roms but i wanna know how to , and which rom to start from
Myrddin Wyllt said:
Remember to flash back to default ROM between home-cooked ROMs to prevent Extended ROM corruption.
Click to expand...
Click to collapse
What do you mean? Like, flash back to the original ROM on the Wizard from like T-Mobile and then flask to the new ROM?
This whole time I've just been flashing from ROM to ROM. How would you know if there's Extended ROM corruption?
I don't do this and nothing bad happend... I'm using softSPL.
Hi,
I won an auction for a T-Mobile Ameo and started to do my homework, while the phone doesn't arrive.
I already own a BlueAngel and two Universal, so it should not be that new to me. However, I do have a few questions:
SPL: as I understand it, this is like a second stage boot loader. There is the V1.2 by Oli, which is like patched to allow any firmware to be installed, as oposed to the original one, which only allows to flash signed firmware matching the country ID. Is this more or less correct?
SPL 3.5: there is a new second stage boot loader, which is required for WM6.1 like the AP4.0. Correct?
Downgrade back to SPL 1.2: this is now possible again?
Last question: there seems to be official 6.1 firmware versions from T-Mobile.
Can I just upgrade the WM5 untouched Ameo to the official WM6.1?
What if I have the german WM5 and want to use T-Mobile's WWE 6.1 instead of the german one?
Is there any stupid combination of firmware and SPL that will lead to a brick or a dead end?
Thanks in advance!
Cheers,
vma
I am newbie with X7500
vma said:
Hi,
I won an auction for a T-Mobile Ameo and started to do my homework, while the phone doesn't arrive.
I already own a BlueAngel and two Universal, so it should not be that new to me. However, I do have a few questions:
SPL: as I understand it, this is like a second stage boot loader. There is the V1.2 by Oli, which is like patched to allow any firmware to be installed, as oposed to the original one, which only allows to flash signed firmware matching the country ID. Is this more or less correct?
Click to expand...
Click to collapse
I think is correct.
vma said:
SPL 3.5: there is a new second stage boot loader, which is required for WM6.1 like the AP4.0. Correct?
Click to expand...
Click to collapse
SPL 3.5 is for ROMs adapted from X7510 (but not for X7510)
vma said:
Downgrade back to SPL 1.2: this is now possible again?
Click to expand...
Click to collapse
Yes.
vma said:
Last question: there seems to be official 6.1 firmware versions from T-Mobile.
Can I just upgrade the WM5 untouched Ameo to the official WM6.1?
Click to expand...
Click to collapse
Yes.
vma said:
What if I have the german WM5 and want to use T-Mobile's WWE 6.1 instead of the german one?
Click to expand...
Click to collapse
You must make superCID in your X7500 (>>>SPL1.2)
vma said:
Is there any stupid combination of firmware and SPL that will lead to a brick or a dead end?
Click to expand...
Click to collapse
I think ROM for SPL3.5 in SPL1.x and for SPL1.x in SPL 3.5
Thanks for the resonse.
So here is the sum up for all Newbies like myself:
****************************************************
The Hitchiker's Guide to understanding SPL on Athena
****************************************************
1) SPL = second stage bootloader
2) Athena 7500 is originally shipped with SPL 1.2
3) Athena 7510 is originally shipped with SPL 3.5
4) for different firmware to be loaded, one need a hacked SPL, that allows flashing unsigned firmware
5) There is a modified SPL 3.5 for the Athena 7500 that allows WM6.x firmware, ported from the Athena 7510 to run on the 7500
6) SPL 1.2 and 3.5 are incompatible, regarding firmware, due to the different amount of memory reserved for the ROM. A SPL 1.2 firmware won't run on SPL 3.5 and the other way around, neither. Trying to do so, will make the black screen or reset loop happen.
7) to get SPL 1.2 Olipro (the hacked one), you need to do the UNLOCKER procedure (search sticky)
8) to get SPL 3.5 Olipro, you need to install AP 4.0 (it's a WM6.1 firmware, that installs the SPL 3.5 Olipro as well)
9) to be able to install SPL 1.2 compatible firmware again, you need to follow the DOWNGRADER procedure (search sticky)
10) if you want to have, for warranty issues, the original SPL 1.2 back, you need to install an official dump. I am not 100% sure about this one...
****************************************************
I hope my statements are correct. If not, please let me know, so this post can act as a beginners first read. Currently I have to confess, that it is quite confusing to understand these 10 points... And I am already familiar with modding the BA, Universal, HP 514, VDA GPS, etc.
Thanks,
vma
PS: Yes, I ask silly questions, but still I try to bring something back...
vma said:
2) Athena 7500 is originally shipped with SPL 1.2
Click to expand...
Click to collapse
No, X7500 original is SPL 1.1
Is there a way to go back from i.e. SPL 1.2olipro to official SPL?
Thanks,
vma
Hi everybody,
i get a problem when i tried to flash my second HD2, flashed the first one without problems
i searched for spl 3.03 and i found other threads saying that we have to flash with stock ROM but the serial number doesn't match with the mskip list...
S/N is : HT01KNW03882 is there anyone who can tell me it 's from where ?
i bought it to a guy who get it with a contract it's under Orange french ROM and i'm in france so i get this french ROM:Leo_HTC_FRA_1.43.406.2_Radio_Signed_15.26.50.07U_2.04.50.22_2
but i get this message error during a sd card method (card was formatted in FAT32), after showing me the bootloader screen, in the grey back :00028002
Not allow
and then it returns in the tri color screen
sorry for the bad english and thanks in advance
Hello sir, honestly it isn't complicated.
You mention that it is a device who came from a contract under Orange.
So it is a Orange branded device.
So conclusion; you need this ROM: RUU_Leo_S_Orange_FR-B2B_3.14.73.2 Download!
And for your info; I have verified it with your S/N
thanks for reply !
this is the ROM i had already and the only one i can get from HTC whith the S/N you'r right but i tried that and it do not change spl
i just flashed it now with SSPL and a 1.43 french stock ROM but i just want HSPL on it
abdelQouddouss said:
thanks for reply !
this is the ROM i had already and the only one i can get from HTC whith the S/N you'r right but i tried that and it do not change spl
i just flashed it now with SSPL and a 1.43 french stock ROM but i just want HSPL on it
Click to expand...
Click to collapse
Mate, Im confused..
You said you have that rom installed/flashed but didnt change the SPL?
As I know, the stock rom version 3.14 contains SPL 3.03.0000. So, your hd2 should have had that spl now.
Try to check again in case you missed something.
Also please keep in mind that SPL 3.03.0000 are not compatible with HSPL at the moment. It will cause you trouble if you install HSPL over SPL 3.03
Cheers
silverwind said:
Mate, Im confused..
You said you have that rom installed/flashed but didnt change the SPL?
As I know, the stock rom version 3.14 contains SPL 3.03.0000. So, your hd2 should have had that spl now.
Try to check again in case you missed something.
Also please keep in mind that SPL 3.03.0000 are not compatible with HSPL at the moment. It will cause you trouble if you install HSPL over SPL 3.03
Cheers
Click to expand...
Click to collapse
that's the ROM i had when i get the phone and the only one i can get via HTC and the spl was only 3.03.0000 and do not change with flashing this ROM
now i have 1.43.french ROM and still this $&!รน^* 3.03.000 spl
ok i have successfully flashed the device with darkstone SuperRAM FroYo v1.5 using jayceooi's video because i saw the spl 3.03 in it
abdelQouddouss said:
thanks for reply !
this is the ROM i had already and the only one i can get from HTC whith the S/N you'r right but i tried that and it do not change spl
i just flashed it now with SSPL and a 1.43 french stock ROM but i just want HSPL on it
Click to expand...
Click to collapse
First of all I'm confused, If you already have this ROM; way your question about that you card find your stock ROM based on your S/N???
And secondly, way would you install stock ROM over SSPL??? Just use the normal installation proses. But in case you have HSPL on your device, remove it first. (HSPL isn't compatible with stock ROM 3.14)
was afraid when i saw that no S/N was like mine and i want HSPL because it's easy and i use it since Trinity without any probs.
flashed with SSPL because i really don't like Orange's ROM
If i understand correctly, you flashed with sspl and can't go back to hspl even after going back to stock rom. Its very easy to solve but difficult to find the required rom. All you have to do is download different kinds or should i say download an older version of the orange stock rom and install it on your device. That should solve your proplem, at least that how i was able to solve mine.
Abdul9. said:
an older version of the orange stock rom and install it on your device.
Click to expand...
Click to collapse
hehe, and that little piece of info is the cause of confisuion this mildly amusing thread,, , you see the only orange rom that has been released by HTC directly is the 3.14, (there is an earlier orange FR rom about, but i remember lots of people hunting high and low last summer for it) but the OP wants to downgrade to apply hspl.
@OP - give the one in post 2 a try HERE.