Windows Service Tool will not connect for me all of a sudden, and I can't seem to figure out why.
It was set up properly and working before (I could see my device information and read the ROM). But I recently performed the SIM unlock at imei-check, and suddenly WST gives me a "No Device Detected" message. I have gone through all of the tutorials and have reinstalled WST, WMDC as well as the necessary drivers, but to no avail. And yes, I did try to enable RAPI but even that did not work.
Is there anything that I am forgetting or any other help someone can provide?
Related
I need some assistance in UNlocking my 8125. I sent my phone into at&t for repairs, they sent the phone back locked. I am an old ATTWS customer, I have been waiting for one week for my unlock code. I recently purchased an 8525 and SIM/CID Unlocked that phone, but I need assistance with this phone. I have run the lokiwiz03a several times, but it keeps giving me "The system cannot find the path specified" on all the lines of the program. Of course at the end it does not provide an unlock code, It repeats the message.
I think you are not doing it proper,I may be wrong,but most probably you have to copy and paste two cab files 'Cert_SPCS' and 'EnableRapi' in the phone somewhere and execute them in the phone,then after that run 'lokiwizMSL' on your pc.
Cheers!
I loaded both .cab files on the 8125, they both ran succesfully. I have the phone connected to active sync. I am at a loss on this. I have no clue why this is not working. I have flashed numerous ROM's on phones, this one seems to be a pain the in the behind. At&t just returned the phone from repairs, could they have installed something to block this?
hmmm,
really strange though,may be they have put some kinda special code on it.what repairs were carried on it ?
btw,have you tried to sim unlock with WST 4.2 tool,ask mestrini,if it might do the trick.
Cheers!
I ran the WST as you requested. It is telling me that the DOC chip is write protected. When I run the CID Action and Run Super CID it returns that message. When I run SIM unlock it generates all the data from the phone and produces LOCKED in the status. At the bottom of all the data it returns DOC chip is write protected. I may be running this tool wrong, your info is appreciated.
WST simlock tool doesn't work on G4.
Easiest way:
1. Run flight mode.
2. Turn off your Wizard and insert "bad" simcard.
3. Turn on your Wizzard copy Two cabs Cert_SPCS' and 'EnableRapi'
4. Install it on device memory.
5. Turn on phone (in commanager)
6. Run lokiwiz, it should work!
How do I turn on the phone with the wrong SIm in the phone, it keeps going back to the SIM lock page. I am able to turn on the flight mode, but I can not do anything else, it keep srefering back to the SIMlock page.
simlock screen = run lokiwiz and enter generated code. It must work
Everyline on the screen reports "The system cannot find the path specified" I think at&t has protected this from unlocking?
same happens to me
try running lokiwiz from c:\
make sure that two cabs are installed
wizard is an old model I think at&t is taking care over iphone now ;p
Please help... Its urgent.... I used lokiwiz to unlock my HTC 3125 but it resulted in a fatal problem. When I insert any sim in the phone it shows message... "Data crashes please contact your service center"...
Please help me to remove this message so that i can unlock it!!!!
im sorry but you must be retarded. Why in gods name would you use lockWIZ wiz standing for Wizard, an unlocking to for a completely different phone on your 3125????? its probably bricked... you can try doing a hard reset, but unlock tools usually mess around with the Hard-spl. it wont be covered under warranty.
I had the same problem.
Hello I had the same problem (I also used lokiwiz), after that I used the service of imei-check.co.uk (U$39) and It did not work too, my phone is still damaged, I think there is no easy solution for this, good luck to you and let me know if you fix the phone I still have mine.
Regards
where did you find a manual to use lokiwiz iwth StarTrek?....
Hello,
I have a Dutch Orange SPV-F600 I'm trying to App unlock my phone by running regeditSTG2.cab on my phone, but I cannot get it to work tried copying it to my phone/card through explorer active sync or just by connecting my card to my PC both methods failed. It says it doesn't have a legal certificate, so the installation fails on my phone.
I also have tried running regdit applications on my PC for my phone, but it's a no-go cause it will give me the message access denied. Trying to disable security policies so I can CID unlock my phone, assistance/help needed please.
Any solutions anyone?
Thanks.
Seph32 said:
Hello,
I have a Dutch Orange SPV-F600 I'm trying to App unlock my phone by running regeditSTG2.cab on my phone, but I cannot get it to work tried copying it to my phone/card through explorer active sync or just by connecting my card to my PC both methods failed. It says it doesn't have a legal certificate, so the installation fails on my phone.
I also have tried running regdit applications on my PC for my phone, but it's a no-go cause it will give me the message access denied. Trying to disable security policies so I can CID unlock my phone, assistance/help needed please.
Any solutions anyone?
Thanks.
Click to expand...
Click to collapse
SDA_ApplicationUnlock.exe
Tried using SDA unlocker but it says
"SDA is not unlockable"
I really want to run WM6.1 on my phone if there's any other way please help.
SP_AllowCertificateInstall.cab
Hi everyone,
I'm having a lot of trouble getting my bootloader unlocked and I've tried literally everything. It stops at 50% when verifying and says "Current account is different from the account info on the device". My device is a Redmi Note 3 Special Edition aka 'kate'. I bought the phone from HonorBuy. Here's a screenshot: http://server.florens.be/Screenshot_2017-01-25-18-31-37-155_com.android.settings[1].png
Here's a list of what I've tried:
Removing driver signature check (using the commands)
Reflashing the latest dev version of MIUI (downloaded with my PC, just to be sure)
Waiting 7 days (At the moment it's 9 days since I received the SMS)
Enabling Enable OEM Unlock and USB debugging in developer settings
Going to http://i.mi.com (more on that later)
Loging in with my phone number/UID on the unlock tool and phone
Removing all security (fingerprint password, PIN, patern lock and even app lock)
Install ADB from the troubleshooting section in this subreddits wiki (it said it was already installed)
Install drivers with XiaoMiFlash (and reinstalling them from within the tool)
Completing the security check-up on http://i.mi.com > Account
Using a different PC (kind of: I used a VM and it gave a different error, also on 50%, will try a real different PC ASAP)
Redownloading the unlock tool
Enableing find device
Running MiFlashUnlock.exe as adminstrator
Flashing latest stable version of MIUI, including a neccesary wipe
And yes: turning it off and on again
Here's a list of odd things I found out (if you hadn't noticed yet, I like lists):
When I go to Developer options > Mi Unlock status and click Add account and device after a short while it says "Couldn't verify, wait a minute or two and try again"
When I go to http://i.mi.com and go to Find device it is off by a couple 100 meters and it has never changed (haven't tested at school yet, only at home)
It's located when it's off and the date and time is right and it also shows as 'online' in 'connected devices'.
MiPCSuite says "Connect your device via USB" when I connect it then a bit later "You need to update your device to use Mi PC Suite, Update your device before connecting".
When I go to the MIUI forum and go to settings the MIUI version and device is not automatically filled in (which people on the forum say, is part of the problem)
Any help is greatly appreciated. If I missed anything I'll at it to the list.
Same phone, same store, same problem..
Previously, I had a Kenzo successfully unlocked. I used the same account to log-in.
Hey Everyone,
After searching for days after a solution to my issue on this site and others I decided to get some personal feedback.
Because its my old phone and cause I want to have some fun with it i decided to root my HTC Desire X and proceeded to look for a tutorial on how. I learned that firstly I needed to unlock the bootloader thus I went to htcdev and followed the instructions all the way to the get token id part.
When I enter this into the CMD I receive a "waiting for any device" message and the PC gives me a popup saying "device unrecognised" which it doesn't do when not in bootloader.
I checked device manager and it says "device failed enumeration".
I have no idea what to do from here, I have tried installing various drivers and programs to no help and HTC Sync manager sometimes recognises the phone and sometimes not. I have heard it is a driver problem but people only say "do you have drivers" and perhaps I dont but I have no idea where to find them for windows 10.
Thanks for reading and I hope someone has an answer!