ok. so i flashed my fuze to energy rom 1.5 final yesterday and it was working fine and dandy. so today i was doing the usual on the phone, msn messenger, internet, etc. i was experiencing some slow down, so i figured i would soft reset the phone to get it up and running again . once i did the reset, however, it it just got stuck at the white world att screen. it doesn't run anymore. its on the white ATT world phone page, and is stuck there. somebody help. what should i do? i tried connecting to mobile device center but it's not detecting the connection to the phone.
toupac said:
ok. so i flashed my fuze to energy rom 1.5 final yesterday and it was working fine and dandy. so today i was doing the usual on the phone, msn messenger, internet, etc. i was experiencing some slow down, so i figured i would soft reset the phone to get it up and running again . once i did the reset, however, it it just got stuck at the white world att screen. it doesn't run anymore. its on the white ATT world phone page, and is stuck there. somebody help. what should i do? i tried connecting to mobile device center but it's not detecting the connection to the phone.
Click to expand...
Click to collapse
Did you try to put the phone in bootloader mode ? Maybe could give it a try (reset and vol down) and try flashing a new rom.
Had a similar problem and freaked cuz thought I had a 3 day old Bricked Fuze. Should be no worries. Just hold down the Down volume button and also the Center button while sticking the stylus in the reset button. Should come up with the tri color screen. Do what it says to restore. Just to let you know anything that you had saved on the phone would be forever lost. IMO a very small sacrifice to get my phone back.
toupac said:
ok. so i flashed my fuze to energy rom 1.5 final yesterday and it was working fine and dandy. so today i was doing the usual on the phone, msn messenger, internet, etc. i was experiencing some slow down, so i figured i would soft reset the phone to get it up and running again . once i did the reset, however, it it just got stuck at the white world att screen. it doesn't run anymore. its on the white ATT world phone page, and is stuck there. somebody help. what should i do? i tried connecting to mobile device center but it's not detecting the connection to the phone.
Click to expand...
Click to collapse
I guess you should have posted this on the ROMs thread, in case it's a ROM bug, but if the suggestions above don't work for you, you might have a bad flash. Try reflashing and make sure you hard reset again right at the "tap the screen to setup device" screen. And just to try to make it as safe as possible, try removing the SD card, you never know.......
Related
Hi guys,
I have just bought an o2 xda ii and am having serious problems
was trying to establish a bluetooth connection with nokia 6600 and it just froze displaying the today screen
now xda hangs after switching on and nothing works only the bluetooth light keeps on flashing
cant try anything as it doesnt function at all.
Can anybody help
Isn't There anyone who can help me...??????
Isn't There anyone who can help me...?????? :roll: :roll: :roll: :roll:
when you mean turn on do you talk about turn on as in turn on the top power connector
or a softreset ?
if you mean top power connector then that dont reset the pda you need to do a softreset
if you did mean a softreset then i dont know any other way then a hardreset which of cause delete all your data
Inderts the stylus in the reset hole, if that doesnt work then as the man said you will need to do a hard reset and all data will be lost, hard reset is done by pressing power while inserting stylus in reset hole.
Hi
Thanks for yr reply
I have aslo tried a hard reset but no luck
The device switches on and freezes on the blue O2 screen or sometimes goes thru the setup procedure & freezes at the today screen
Tried it a couple of times
Is there any other way please let me know.
Thanx again :? :? :?
Which ROM do you use? You can try to flash your ROM. There are plenty of treads on this forum on how to do this. Make sure you don't use a USB hub when connected to flash you're ROM. Your MDA II must be connected to a normal USB connection (I learned it the hard way....)
Wouter
Hi
Sorry for the late reply as i was out of town
Dunno exactly how to identify the rom version but when switched on it shows
R 1.05.14
G 1337.14
D 1.03.00 USA
Can u please suggest what to do
Thanx
You can see which ROM version you have by going to:
Settings, System tab and then Device information.
Mine says:
ROM version 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
So I guess you can do a ROM upgrade. To find out how to do it, just do a search on this forum for ROM upgrade and you'll find detailed describcions on how to do it. Make sure that your device is not connected via a USB hub otherwise you can have some trouble getting it done.
Wouter
Thanx for the prompt reply but the problem is that the device starts goes on thru the new device setup programme & hangs nuthing beyong that
So am unable to go to the system settings
Is there any other way i can see the rom version...
Well the colors at the beginning tell you which ROM you have (but are only very short on the screen so hard to read) but you can defenitely upgrade.
Wouter
No Bluettoth Hardware Installed Error Msg
Hey, this sounds like the same problem I have too! I have just posted a new subject in the "Using It" section of this Forum. Does your device also suffer from the following i.e. when the software ha loaded and you hit the bluetooth icon, does this error message come up "There is No Bluetooth Hardware Installed on this Device"? Pls read my post below.
"I have an XDA II, bought from the UK. I live in E. Africa so sending it back is a hassle. EVer since I bought it, although it was OK for a few days, a msg then came up saying "There is no bluetooth hardware installed on this device". This means I cannot put b/t on or off. Also, it affects the performance of the XDA II as it crashes frequently and loses ActiveSync connections frequently. The odd thing is that SOMETIMES, after a hard reset, it's OK again. But then when I do a subsequent hard or even soft reset the same problem occurs! So it DOES work. But not consistently. I conttacted O2 by email & tel. They were semi-helpful. I returned the XDA II to the O2 repair centre in London by courier (expensive). It came back, apparently repaired, but they had addressed the wrong thing and the problem still persists! I am loathe to sending it back without trying something for it - if you have any suggestions. Perhaps I can try a Rom Update or something to see if it sorts it. Even O2 are baffled, but I do not have the privilege of sending it off again because of where I live. Any suggestions or advice please? Many thanks. "
'Frozen' O2 screen with bluetooth light flashing
Hi to all,
I 've been having similar problems since I got my unit last November. You may be able to relate with my problems.. screen won't respond to any taps.. when you send SMS, the 'Send' button freezes... tried soft resetting, sometimes lucky, gets back to normal... at worst, does a hard reset...
after a few months of no reliable answer from local and foreign XDA help.. i'm used to either removing my battery/sim.. wait for awhile.. try to find a place where there's better network signal.. then, puts back the SIM and battery.. many times a get lucky by doing this... but there are also times that I had to do hard reset.. like two hours ago..
Hopefully, some help will come ...
For those who have yet to develop a routine to address similar problem, you may try mine...
Helpless xda II fanatic(???)
Archel Angeles
I have similar experience too. I got my XDAII last November, it runs smoth without a single hang for the first month until one day in January, while using it reboot by itself, after that day the device will just reboot anytime anywhere!
Thinking that this might be caused by some installed softwae, I hard reset my device. After the initial setup then it hang while running the auto installation from the extended rom saying that some file is missing. I hard reset again and it still hang while running the auto installation but saying another file is missing. On the day alone, I hard reset my device for more than 10 times! Each time it will either hang on the O2 startup screen or during the auto installation. Until finally one time manage to pass through the initial setup and auto installation.
On the second day, I quickly bring my set to the service centre for repair, while I describe and showing the faulty set to the service officer, the device self reboot for another couple of times.
I took back my set two days later, the service officer told me they cannot find the fault of this so they re-flash the rom for me, and they have tested it with internet browsing, mms, sms etc without any problem.
The 'repaired' set works fine for another one month until couple of week ago it start to hang during some incoming calls. When call was received, I press the answer key to answer the phone, the device would just hang with the ballon still showing on the screen, i'm not able to answer the call at all.
Last Friday, I finally hard reset the device again and re-install some my software applicaton and games. Second day morning while I was waiting for my friend, I start to attach photo to my contact, just when I attached the first photo and click on the save, the device hang! I press the soft reset button and the screen goes off without rebooting. I press the reset button again but the screen just won't come back. I even took out the battery and put in my backup battery, still the screen refuse to come back! The screen only come back when I performed a hard reset.
Today i found another problem with the device, the free memory is getting lesser and lesser by itself! Just before I type this reply, I soft reset my device and leave my device on the momory status screen, the allocated momory for the program showing 63.02Mb, in used 16.96MB and the Free momory 46.06MB. Now the in use memory increases to 30.75MB while the Free memory drops to 32.27MB!! I did not run anything in the background, I did not even tough my device!!
Anybody here can help save my device?
I have the same problem now. It is really a nightmare for all of us!!!
Exactly
Have a very similar problems 4 days in the row. Self-Blackhangs without any knowing reason. Impossible to use device longer then 10 min. HELP!!!
P.S. Some days before I try to uninstall Intellisync, wich I try, but does not use for a long time. Uninstall was unsuccessful cause .exe was "in use". There problems begins. May be. After one of hard-resets I remove .exe manually and then uninstall prog, but problems persists.
Hi guys, Fortunatly I do not have the same problems with my XDA II but I was thinking maby it is a type of software that has been installed on the device, I have noticed that some apps can cuase VERY strange things to happen (Even some THEMES!!!).... LOOK out for this..
Maybe you could try and run the XDA II after doing a hard reset as bare as possible... As in not installing any other themes or thirdparty software for a day or two and see if the device still gives your any problems... Will be interesting to find out.. I have had resets on my XDA II from using some themes avalible from the O2 website (that users have made not O2, but still) and since using the default theme I have not had a crash or a reboot since... (THIS TOOK ME FORVER to find out)... but might be worth a try..
Keep us all informed how you go with things.. Hopfully its just a pice of software or somthing simple like that...
GOOD LUCK ALL!!!
So, guys, I think that there is a HW problem. MDA freezing during initial install or during HardReset before install. Maybe "motherboard" is microbroken or so on.
Week ago I return my MDAII to T-Mobile and they will repair it to some way. I will report this way to you all as soon as possible. Let we see.
V.
Hi all,
I have the following devis info of mine:
ROM version 1.66.00WWE
ROM date: 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.101
This Rom works great, just search for it and upgrade!!
Wish you all luck!!!
sounds a lot like the problem I'm having.
Can any of you guys install a new rom at all? mine freezes up and activesync disconnects the second it does... So I guess when flashing your rom and having it freeze up on you, you'd be even further from a solution... thoughts pls
I fixed it guys...
seems a corrupted rom was the problem hitting bootloader mode (power + action + stylus) and installing a new rom fixed my problems
let me know how it works out for you guys
Well i need some get. this is not my 1st PPC since i have had thr 6700, titan and not the touch pro but i guess i dont know what im doing...
so i downloaded a few cabs, nothing big. i dont mess with a lot. got some themes, lumos, touch response etc.
i the problems started when i downloaded my last theme but im not 100 % sure that was what caused the problem. i did use advance config and change some things but nothing major, just some setting on the program that said "advised"
well, i had problems and i wanted to delete everything and start over but i couldnt delete a theme.
to make a story short, i was at the mall today and stopped by the sprint store to see if the tech could help me...
some how files got delete and from what i was told the tech couldnt even do a master reset!!! she couldnt figure it out... the phone works but its missing some things.
can i fix this? download a custom ROM? and use that?
i wouldnt think advance config can delete something, or a theme.... i dont know what i did but something happened.
any help would be great
thanks
hold power, down volume and ok button all while pushing the reset button. release the reset button but continue to hold the other three untill the phone reboots into the hard reset menu. hit the volume up button and tada bobs your uncle. if that doesnt work selet clear memory in the settings menu and follow the prompts
the sprint tech couldnt get it to work. she tired a master reset and nothing. they said files where missing.
she has the same phone and tired a lot of things
i dont get how i can erase files like this, i didnt mess with any files... the only thing i have done is download simple cabs
i did use advance config but once again i didnt delete anything. just selected what it said was best.
If I'm hearing you correctly you need to do a Hard Reset....
To do so there are two ways:
First way:
While phone is OFF, press volume down, cener d-pad, and power button until message comes on. Press volume up to complete.
Second way:
While phone is on, press volume down, center d-pad, and stylus-reset until message comes on
it wont do a hard reset
i have done it, sometimes it beeps... i get the htc logo and thats about it. i never get a message or anything, it just goes black like a soft reset
the only diff is that it wont show the sprint logo like when i have done a soft reset... it shows the htc logo
now im worried about downloading cabs. i never had this problem. and i didnt delete anything from the phone. so i dont know who those important files they say are missing got deleted.
the guy at the sprint store on base dialed ##786# and hit the call button, he says that will do a reset or something... and it wouldnt work
nothing else? no one else has a idea of what happened
this is my 3rd ppc and this is a 1st, it would be nice to know what could have cause this problem so i dont do it again.
you guys are no help
Have you tried flashing the ROM over on it? Will it connect to the computer via Activesync?
Mayonesa said:
it wont do a hard reset
the guy at the sprint store on base dialed ##786# and hit the call button, he says that will do a reset or something... and it wouldnt work
Click to expand...
Click to collapse
LMAO!! Now that's funny. The guy at the sprint store doesn't have a clue.
If you do ##786# on the Sprint phone, it should bring up a EPST screen. Which when you press menu, there is an option to reset it, however I doubt that does anything to solve your problem.
I would suggest, trying to flash the ROM back on the phone (if you haven't tried that already)
i have never connected the phone using activesync... i just got the phone like 2 weeks ago ( replaced my mogul)
i was thinking about trying that but havent done it for 2 reasons
1. i have never flashed a ROM
2. im getting a new TP, it has been ordered... if i get to keep the one i have now i will try to flash but i dont want to try it if i have to give up the phone. only to have to change it back
i do want to find out why this happened. like i said, i like to add themes and other programs i like but im worried about messing my new one and then ill be out of luck.
Hi guys , had a weird problem with my end call/power button.
Out of no where my end call button stopped working. I've found its most annoying because i usually press it to turn the screen off ( lock the screen)
The button doesnt appear to be broken or anything and doesnt work when i press hard
I did a software factory reset this morning via the phone and the button started working again! but its gone 3 hours later again!
I havent recently installed anything and it appeared out of the blue... any help??!
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
kinda fixed it now, dont know how though, did a hard rest and formatted mem card, removed everything and didnt reinstall half the stuff i used to have inc all the cabs from here.
its working now on the new rom just fine, but its the first time its happened to me too, and i didnt even do anything !
try a hard reset and wipe and reinstall youre old cabs at ure own risk!
sl1200 said:
Same problem here! Nothing helped, hard reset, another custom rom, back to stock rom and radio...nothing. Hardware failure, I suspect. Sending it back to factory under warranty. Never had a hardware problem before in 12 yrs using mobile phones.
Click to expand...
Click to collapse
Same happens for me too, not all endkey, but my home key is started to work as call key, back and windows key started to work as volume up key.
I am really annoyed guys!! help me out guys!!
any solution mine too is not working since last night did hard rest but still no luck
my mother just bought an sgs2 about 1 week ago. she is not that expert in phones and all that, but she has a serious problem now. she made a lockscreen code witch she cant remember now. stupid right. how can u bypass it or dissable it. i must say i have tried my self almost anything i can think of
this is what i my self have tried:
factory reset / hardreset didnt work
flashing stock rom again, didnt work
flashing 3 custom roms didnt work, to mention with root kernels
and no my mom never made an gmail account. she only uses it for calling and sms
so what the hell is there to do??
or do i need take to a samsung service center???
You're likely looking at data loss by factory resetting and overloading it with wrong passwords from recovery mode.
http://forum.xda-developers.com/showthread.php?p=17039887#post17039887
Though you say you've factory reset already and it didn't work - what didn't work?
when i did factory reset and rebooted the phone, it went okay, and i thought i had dissablet it, but no, when the screens turns black and u want use it again, the lockscreen keeps apper
Can't you just disable it before the screen turns off then? Settings --> Location and security --> Set up screen lock --> None.
no when trying to dissable it asks for the code, u must enter the code before able to dissable, im stuck, what should i do
I just noticed your thread [Q] screen locked, need help.
vodcas said:
2 days ago i found a sgs2 on the ground outside at the city. the screen is totally ****ed but it still works. so i thought cool, who ever lost it, should have been more carefully, but honestly i dont care.
but when i turn it on, i can se its on cynogenmode but i cant use cause of some screen password. i have tried everything from re flash og several types of roms, including stock, cynogenmode and exonys, but all appear but it wont install new rom. i cant enter factory mode, cause when i try it says need password. so i cant do a hardreset. i have searched the net for everything, and i have tried almost possible ways to get around that screen lock, but nothing works. so how can i get rid of it??? when i press volume upp with home and turn on button it askes for passworld, when i do it with volume down, i get into odin mode. i have tried 0000 and 00000000 but still dont work. any one can help?? pls
Click to expand...
Click to collapse
Sounds like someone's telling porkies in this thread.
lol, that phone wasnt usefull, thats like long time ago. believe or not.
i my self have a sgs2 and i recommendet my mother. im glad i found that phone on the ground, so i could by one. anyway should i just say to my mother she must take it to a samsung service center??
vodcas said:
believe or not.
Click to expand...
Click to collapse
I choose not. Maybe you'll find someone else who does believe you and willing to help.
I'm kind of stuck and could use your help. It's much appreciated. I have an unlocked C6833 I've been using as a "mini tablet" (no SIM card/no mods/in the US). I received notification yesterday that there was an up date (I'm guessing the latest) so I downloaded it. I thought everything was going fine until I checked this morning and nothing---
Computer can't access phone when connected.
I can't access anything on the phone. The pic attached is the only thing that shows when I press the power button and then it turns off and the green dot starts to flash again.
Attached is a pic of whats going on.
IRONLUNG said:
I'm kind of stuck and could use your help. It's much appreciated. I have an unlocked C6833 I've been using as a "mini tablet" (no SIM card/no mods/in the US). I received notification yesterday that there was an up date (I'm guessing the latest) so I downloaded it. I thought everything was going fine until I checked this morning and nothing---
Computer can't access phone when connected.
I can't access anything on the phone. The pic attached is the only thing that shows when I press the power button and then it turns off and the green dot starts to flash again.
Attached is a pic of whats going on.
Click to expand...
Click to collapse
What it says on the first screen? I can't read it. Can't you keep pressing next?
I think the error message said initialbootsetup not responding or something to that affect. I couldn't really do anything with the phone.
It turns out that the Sony servers were overloaded or had some glitch because of the release and a lot of people trying to upgrade were stopped in their tracks.
I should've known.....never had a problem like this w/ any other phone (first Sony). Seems like they've always had some sort of problem w/ their servers and whatnot. Oh well live and learn......
It's all good now. I was able to upgrade via usb/PCC the next morning.
Sent from my HTC One using XDA Free mobile app