I have created my first ROM using the Manilla 2D interface (version from IOLITE OEM 5.50) and all is well except when I am on the text tab and click on the new message icon it does nothing. The email one works fine, just not the text one. Have I missed a setting somewhere in my ROM or is it a bug?
Tried to search the forum but haven't found anything.
Thanks in advance.
D
d_train said:
I have created my first ROM using the Manilla 2D interface (version from IOLITE OEM 5.50) and all is well except when I am on the text tab and click on the new message icon it does nothing. The email one works fine, just not the text one. Have I missed a setting somewhere in my ROM or is it a bug?
Click to expand...
Click to collapse
Probably missing the Arcsoft MMS package. Need to get it from a earlier build.
Here's a link to the Jade build:
http://www.4shared.com/file/91900661/ea1d2880/PACKAGE_Jade_Arcsoft_MMS.html
Thanks rling worked a treat.
D
My ROM was going great - but I found a glitch (I think). If I set the phone to vibrate only (whilst in meetings) and then set the sound back to normal, the sound doesn't come back - it still just vibrates. Once the phone is softreset all is okay again.
I don't have the same problem if I set it to silent and back to normal.
any ideas anyone?
thanks
D
OEM: IOLITE 5.50
ROM: 21109
SYS: 21109
Okay an update/correction. It isn't when I set it to vibrate and then to normal - it happens after I pair my Bluetooth with my visor bluetooth car handsfree device and use it in the car. After I turn off the handsfree device the phone still shows an icon indicating that it is using a handsfree device and then will only vibrate until I softreset. I hope this is making sense
When I first paired the devices it asked if I wanted to make this device the default car kit and I said yes - hadn't seen that before - could that be the cause?
Should I try a different ROM?
Thanks in advance
D
d_train said:
When I first paired the devices it asked if I wanted to make this device the default car kit and I said yes - hadn't seen that before - could that be the cause?
Click to expand...
Click to collapse
More than likely. Similar complaint recevied by one user with my ROM based on the 20765 SYS. I can only assume that if you select it as a default car kit, it does not release the bluetooth connection when you get out of range. Try deleting the pairing, and reconnect without accepting default and see what happens.
rling said:
More than likely. Similar complaint recevied by one user with my ROM based on the 20765 SYS. I can only assume that if you select it as a default car kit, it does not release the bluetooth connection when you get out of range. Try deleting the pairing, and reconnect without accepting default and see what happens.
Click to expand...
Click to collapse
Rling - I repaired the device and did not set it as my default car kit and it is the same - no sound after disconnecting from handsfree device. The other thing I noticed is that the bluetooth icon on the menu bar has the handsfree icon, not the standard bluetooth icon.
Could it be the IOLITE Bluetooth Setting package (from OEM 5.5) that was part of my ROM?
Thanks
D
Okay an update -
OS 5.2.21109 (Build 20765.1.4.4) - has the bluetooth issue
OS 5.2.21014 (Build 20765.1.4.4) - has the bluetooth issue
OS 5.2.20765 (Build 20765.1.4.4) - doesn't have the issue
So I am now using XIP 20765/SYS 20765 and OEM 5.50 IOLITE
ROM Version under Device Info is 2.09.721.2 WWE...I know there is a 2.12.707.2 - anyone have it for download?
Thanks for your help.
DT
d_train said:
Okay an update -
OS 5.2.21109 (Build 70765.1.4.4) - has the bluetooth issue
OS 5.2.21014 (Build 70765.1.4.4) - has the bluetooth issue
OS 5.2.20765 (Build 70765.1.4.4) - doesn't have the issue
So I am now using XIP 20765/SYS 20765 and OEM 5.50 IOLITE
Click to expand...
Click to collapse
okay. Looks lie I'll need to fix my ROM too. Thanks for the investigations.
Just for your information, might have to mix the sys from different packages, as I've found 20765 has a big battery drain problem....
Thanks for letting me know, will look at an alternate SYS.
I have one question regarding Outlook. When you are reading a message the left softkey is "Reply All" and I am sure it used to be just "Reply" - is there a way to change it back to just "Reply"??
Thanks
D
After much reading, it appears that this is caused by the Outlook Enhancement in OEM 5.50 and the solution is to disable it - which I have done and it works.
...BUT...
What I haven't been able to find in all the posts from many sites is what does the Outlook Enhancement actually do? It obviously changes the softkey to "Reply All", but what else?
Can I leave it out of my ROM altogether?
Thanks in advance.
D
Related
Hi everyone,
I would like to kick start a thread for any application installed in the latest SE rom by mystery man. The rom seem stable nevertheless some apps seem do not really prepared for the changes. (i mean from WM2003 to WM2003SE). Let begins........
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Will continue to report.......
Best Rgds... :lol:
Wisbar advance freezes and requires soft reset after telephone has been used/or whilst attempting to dial.
XCPU Skalar - you have to update to version 3.85, lower version keeps system to hang
Tillanosoft Pockettweak - update to 4.2.7, lower version destroys font settings
PocketZenPhone - update to latest beta 11 version, older versions are not able to switch phone on again
Can someone tell me what is the function of "Today timeout" which constantly showed 4hrs at Start-Setings-Today?
Well why must that function included in the today settings? The problem is now and then my today screen showed nothing or clean even though i unchecked the Today timeout box to disable it.
After all i suspect something is not right wif the Today timeout option and nothing to do wif Battery Pack.
Anyone experience the above problem? :roll:
Calligrapher 7.4 (just only 7.4 ,older not has this problem)
after i install and use for 15 sec. ,then screen is locked up cannot tap anymore but Button still work.
I do soft reset and disable it then 15 sec ,screen lock again.
Only one way to solve it by using cradle sync with desktop and select remove calligrapher and then soft reset ,it will work normally again.
It may from defect in version 7.4 or conflict with XDA II.
PLease take care ,if you decide to use this version
Problems with SE (both dcs's & mysteryman)
Hey there guys!
I used this weekend (in fact starting friday evening) to upgrade my T-Mobile MDA2 from ROM 1.72 (radio 1.14) to ROM 2.xx and radio 1.18.
Although I did a lot of reflashing up to now - I want to thank you all guys for this forum, because everything I've learnt about my PPC is from here. It is shame that I cannot contribute via paypal because Bulgaria is not included in their country list.
Now.. Here is what I've experienced with my mda:
I upgraded from 1.72 T-Mobile WWE to 2.02ti... All cool - until I started to load the device with programs. I mean - it is cool and fast and nice and colorful..
A guy mentioned that SE boots faster - I can's say that - the phone would show the first boot picture, then fast will change to 2nd and then (in 2 to 5 seconds) the bluetooth led will flash (if at all) at least 5 times and then it shows the today screen or will stay there forever :-(
I understood that:
* xscallar 2.8x would not work - it freezes the system;
* sbp pocketplus 2.1 would hang the system or/and the today screen;
* sprite backup 3.0 hard-resets the system (3 in 2 times after finishing scheduled/normal backup);
* gprs monitor 2.12 would hang the today screen;
* cleartype is a way worse than in 1.60wwe
* if the system works, compared to 1.72 - it is flying! but :-(....
These problems appeared both in 2.02ti and in 2.06, no matter what extended rom I install (if I install any at all - because thru tears I tried that one too ;-) )
The (X) sign for closing programs disappears constantly and some programs could not be closed or [ok]'d :-(
Bluetooth 1.5x would either not work properly or would not work at all.
about the extended rom - i noticed this:
MMS15024_WWE_Hima_OzUp.sa.CAB, despite the lower version compared to MMS2.0.0.13 incorporates in the outlook folder and doesn't take additional space in the today screen. Also it provides sending restrictions as 100K, 200K, MAX - ;-) which is kewl 'cause I missed the ability of my SonyEricsson P900 to send unlimited in size MMS messages.
CallerIDB10, provided with 2.x SE versions cuts about 4 pixels from the bottom of the CLIP pictures and I don't like it - it has no new features or anything
For conclusion:
I liked the look of SE versions - it is really neat and fast - when it works.
But non of my really needed sofware would work as expected.
I went back to T-Mobile 1.72 (edsub's version) and I will tell you guys - there is nothing as stable and fast as it is.
This is my first post here, and I read this forum for more than 8 months. You guys rock!
Yours,
Dean
gerald8297 said:
Hi everyone,
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Best Rgds... :lol:
Click to expand...
Click to collapse
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
After that I switched to 2.02 and all I can say its the most stable ROM
I know from 1.60 .
The reason I am posting here is :
NO PROBLEM WITH Battery Pack Pro v1.11 on the ROM 2.02.t1WWE .
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second boot .
Click to expand...
Click to collapse
I've notices that 2.06 sometimes freeses during boot when SD-card is inserted. It boots normally when SD-card is out and inserted when device finishes booting.
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Probably
Probably , probably , probably
Spb PocletPlus 2.1 is stable in my 2.06SE. The problem i encountered is the unstable widcomm bluetooth stack ( 1.5.0.801 ) which always "could not correctly initialized - BTTrayCE.exe) . can some one post some registry tweak for this?
@ mamaich
can you post the MS cleartype tuning tool please? thanks! :lol:
Phone Profiles is another one....
Using Phone Profiles 7.5 or 8.0, there is a dialog on reboot, 'Can't Find Window", (something like that), and it will not continue booting, only solution is a hard reset...
I can confirm the Calligrapher 7.4... will lock during boot, hard reset
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Pls do so. Many are anticipating.
Thanks for the good work!!!
:lol:
Here is Microsoft Cleartype Tuner.
mamaich said:
Here is Microsoft Cleartype Tuner.
Click to expand...
Click to collapse
Thank you!!! So is this file will refine the ugly font of WM2003SE lanscape Cleartype?
working good mamaich!
still my widcomm BT stack cannot restart once in awhile..any tweak on this?
Tnx.
sprint said:
I had a big problem with 2.06-mystery man . Stuck on the every second
boot . So I had to do Hard Reset all the time.
Click to expand...
Click to collapse
Mine is working fairly well... I did notice the same problem you have, but I got around it by holding in the reset button until it reset itself (normally 5 secs or so). It resets fine every time. This is a pain compared to 1.66.00WWE. I haven't tried 1.72 yet. I would like to persist with the 2.06 version to see what bugs it has.
Recrem...
UPDATE:- Installing XCPUScalar Version 2.85 has completely cleared up the reset hang problem. I have configured it to auto start on soft reset, and minnimise on start. I have now reset well over 10 times and it resets as it should. I have XCPUScalar set to a min speed of 400MHz though...
I have only one problem with wm2003se 2.06 - at every call speaker mode turns on automaticly
mamaich said:
Cleartype in 2.06 can be tuned to look fine with cleartype tuning tool from Microsoft. I can upload it if needed.
Click to expand...
Click to collapse
Thanks man ! the tuner is great but still the font is bad in 2.02t1 it was much better with 2.06 but i changed it because it get stuck on reset!
could you please post the clear type file from 2.06?
thanx in advance :wink:
gerald8297 said:
1) Battery Pack Pro v1.11-will make your today screen screwed up. How? Go Start-Settings-Today-Items-then click OK and closed it-you will get what i meant here.
Click to expand...
Click to collapse
Yeap i encountered this problem too. Any solution so far? Or shall i reflash my rom to dcs one 2.02? Would it solve this problem?
Anyone pls HELP......
My list of problematic programs in SE
1. Mamaich's "Contact Button", which I miss dearly.
2. Pocket Zen Phone.
3. BTtools freeze Today screen. (not needed for functional purposes, only used to turn BT off automatically)
4. Still have to use EzWAP for MMS
5. Camera switch screen back to Portrait.
:?: Can someone point me to the location of the download of the blue tooth tools file please ...ive looked for ages with no joy
Here it is.
http://bluetooth.i-networx.de/index_e.html
And heres the cab file, just copy to your phone and execute there.
Anyone tried BT Tools 1.1 on WM2005 ?
You don't need BT tool on WM2005. He has better BT manager and you can you it instead of BT tools.
Rico
I've tried it on Buzz's 1.6 version of wm5 (Himalaya) and before I upgraded my radio ROM from 1.14 BT Tools loaded and worked as per the old version (like a charm). While it may not be necessary owing to certain improvements in wm5 it still had features I liked (BT auto power off when idle for 60s).
Once I've upgraded to 1.17 it loads but nolonger appear on the today screen. Then when I bond with a new device I get the BT Tools profiles screen. I have then been able to use the Activesync profile to sync with Outlook 2002 on my PC via BT. I can't however access the two power/light profiles nor the BT auto shut off feature (I really liked that function for power saving) or at least not yet.
I'm going to try Radio ROM 1.08 and 1.18 as per suggestions in other forums (as I'm hanging when I now sync using the cradle) and will let you know if anything changes.
Regards - Mallow1
NB I'm using Version 1.1.0.0 of BT Tools not 1.0.1.2 (the one downloadable above). See the actual site for details of the differences:-
http://bluetooth.i-networx.de/index_e.html
Upgraded to Radio ROM 1.18, BT Tools now appears again in the Today Screen but is completely inert re autoshut off (the only feature I'm now interested in given the ROM enhancements). So I'm unloading it and will serach for another BT manager with the same auto BT on/off feature.
Hope that was of use.
Mallow1
PS didn't try 1.08
I'm gald that you got the BT Tools to work for you. When I upgraded to WM2003 se and tried to set up my Jabra BT200A back up, it was no go. I could hear the caller, but the headset mic was non working, only the mic on the device. So I tried the BT Tools, to no avail.
The proverbial cake icing was that BT Tools made the device speaker phone quick working as well. Un-install BT Tools, and I get the speakerphone back, but still woe is me, no practical functionality out my trusty Jabra.
Any thoughts?
BTH tools 1.0.1.2 run just fine under WM 5.0 ROM 1.60c.
Especially ActiveSync via BT with several other computers works like a charm.
BTH tools 1.1.0.0 do not function correctly. Both profiles do exactly the same, either auto-switch or not and ActiveSync over BT does not work properly.
Sascha
Thanks SaBo,
I'll give it a whirl as it would be nice to have the auto BT on/off back again.
Chelms,
I trust SaBo's comments work 4u too. If not the only thing I can suggest (not being a jabra200 user myself) is to surf the forums. I know a lot has been written about getting the jabra BT800 working properly with HTC kit (Jabra state that it isn't compatable but I think the BA forum have been chasing it as a bit of a Holy Grail). I can't recall if they definitievly got there but I think they did. You may find something on your headset too. You can also try Buzz's forums on a similar search since he has been the one to work WM5 magic (http://buzzdev.net/). Further afield you might try Howard's Forum (http://www.howardforums.com/)
Regards - Mallow1
For all those still using Pocket Bluetooth Tools in WM5 (not for its BT profiles as they aren't needed any more but for the functionality of BT auto on/off and the two power/ screen saver profiles via the Today screen) FYI I'm currently running TofClock WM5 1.71a (working like a charm) and BTHTools 1.1.0.0 (which is also working like a charm.... NB the cab version as oddly enough I couldn't get the PC exe version to work). Just ensure that after installation your registry has theses settings entered under:-
HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\Bluetooth Tools
then add new values of:
Type Name Data
REG_SZ DLL BTHToday.dll
REG_DWORD Enabled 1
REG_DWORD Flags 0
REG_DWORD Options 0
REG_DWORD Order 32
REG_DWORD Type 4
NB Order is just the position number in the Today screen list so just tweak it via WM's start\settings\personal\Today route or type a number which suites you directly when entering the values above.
Regards - Mallow 1
PS anyone know a similar program (not the BT profiles part just the auto BT on/ off amd with a taskbar icon... like an enhanced version of BTIcon.exe.... In fact BTIcone.exe with auto on/off would be perfect... of to try another search)
FYI BTTools 1.1.0.0 cab works under TofClock's "WM5 2.01a 64 WWE" but not under the clean WM5 ROM posted by Buzz (i.e 2.00a).
Hey
I'm hoping someone out there will be able to help me solve this problem or I may be saying goodbye to my Trion sooner than I would like.
So here's the problem:
While I am sleeping my trion keeps LockingUp!
This has happened a few times and each has been quite costly, either I oversleep and am late for important appoitments or I miss a number of very important phone calls.
I have tried using differnt ROMS but the problem persists. It happened to me a couple times while using the new I-mate rom so I switched to the new Dopod ROM and it happened again! I'm going to try the TYTN rom now... ugh!
Info Regarding my current setup:
Dopod ROM: 1.23.707.4
Programs:
MSN Messenger
MSN PPC 2003
TCPMP
Cyberon
Aidem MP3
Fit4cat Hermes v1.0
Fit4cat Settings changed from default:
Enable wireless plugin + show pluggin = ON
Remove Wireless Manager Icon = ON
Mount Ext. ROM = ON
Improve A2DP "High" = ON
- and that's all I've enabled. A weird thing I notice with the wireless pluggin is that at times on the Today screen it will just show my bluetooth status and neglect to show the WIFI status; at times the BT icon is right aligned as if the WIFI was still there but invisible and at other times the BT icon is left aligned indicating the WIFI icon is not even there.
That's about it for now. Any help resolving the main FREEZING/CRASHING issue would be GREATLY appreciated.
Thank You!
I have had the same problem. Hard reset and ran software freefor a few days, and same problem. Flashed to imate, and same problem. Flashed back to original HTC, and problem gone. I don't know what it was/is, but I feel your pain. We have almost no software in common, so whatever it is I think the problem is within the ROM itself or common Ext_Rom files. I never ran without Ext_ROM may start there.
this problem I had for about 3 weeks, I am currently using the new dopod rom and I have had no problems at all. It is a software problem issue and as roms develop issues will go I would flash either the new HTC rom or dopod rom as I had no problem with either of them I installed the dopod as it is quicker for me.
the same to me with imate rom, and some time when i press the center/enter button it show the sound volume panel
must go to Tytn rom tonight
hi everyone, I'm using O2 XDA Atom Pure, and the ROM is AKU 0.3 CHT(0.7CHT stable version hasn't release)
I have a problem, when I use pushmail, after serveral hours the actvieSync would stop and shows "Waiting for network", even though I press the "Sync" button, it still shows "Waiting for network", and mail also cannot be push to my cellphone.I have to soft reset to make activeSync work,but this problem still occurs after a period time.
I've already check my GPRS netwwork settings, it's all fine and setting are all correct,and I did not install any software that will affect ActiveSync,so anyone could help me to solve this problem? otherwise the pushmail function is not useful for me....
verseaucus said:
hi everyone, I'm using O2 XDA Atom Pure, and the ROM is AKU 0.3 CHT(0.7CHT stable version hasn't release)
I have a problem, when I use pushmail, after serveral hours the actvieSync would stop and shows "Waiting for network", even though I press the "Sync" button, it still shows "Waiting for network", and mail also cannot be push to my cellphone.I have to soft reset to make activeSync work,but this problem still occurs after a period time.
I've already check my GPRS netwwork settings, it's all fine and setting are all correct,and I did not install any software that will affect ActiveSync,so anyone could help me to solve this problem? otherwise the pushmail function is not useful for me....
Click to expand...
Click to collapse
did you launch the hand writing pad (small) ad may I know which version you are using?
dcoloane said:
did you launch the hand writing pad (small) ad may I know which version you are using?
Click to expand...
Click to collapse
I'm using 0.3 CHT fixed By Jiggs,not dcoloane version.
I didn't launch small hand writing pad but in SIP menu, small hand writing pad is in the list, should I disable this hand writing pad?(how?)
I also see there is a dcoloane version which is made by you, but I found you write:"Sunglobe.ttf is used instead of mingliu.ac3, wince.nls is 1.5MB from CE-Star". I don't know if mingliu is instead by sunglobe will made system fonts unclear or not?
verseaucus said:
I'm using 0.3 CHT fixed By Jiggs,not dcoloane version.
I didn't launch small hand writing pad but in SIP menu, small hand writing pad is in the list, should I disable this hand writing pad?(how?)
I also see there is a dcoloane version which is made by you, but I found you write:"Sunglobe.ttf is used instead of mingliu.ac3, wince.nls is 1.5MB from CE-Star". I don't know if mingliu is instead by sunglobe will made system fonts unclear or not?
Click to expand...
Click to collapse
no it won't, I subsitide the font because I will receive Simplify Chinese SMS and it seems that sunglobe is a better font for both CHT & CHS.
The FIXED version had problems (unstability) on Active SYNC because of the SIP's not really PORT from the same version of the original ROM. Some SIP's are from AKU2.2 WM5 while some from dll's from other devices. The final one is one package get from WM5 AKU2.2 which should minize the impact on system stability. Although I still did not figure out why the small hand writing pad still causing problems. If you really want to use Push Mail often, i suggest you use back AKU2.2 or the final ROM by me, before flashing the new ROM, just use PCBckBackup your SMS, Contacts, Tasks and Calendar stuff to the SD Card. But if you don't want to flash again, Use only Chanjie as SIP instead of the HandWriting.
Well, although this post is pretty old...
I've always been having that problem. Even after some years I still can't tell the reason.
The solution I've been using since then is to restart ActiveSync on the phone using the task manager (which probably does the same than a complete soft reset, but is a lot faster).
Since I've upgraded my Diamond with a new firmware ActiveSync is displayed in the list of active tasks. Using another task manager I killed the process which still didn't help. In another post here I read that disconnecting your Gprs/3g connection might help. So it did.
Using Google you can find a lot of board posting from users with that problem. Noone has found a real solution and Microsoft doesn't seem to care about it.
What I am curious about is: Does your Exchange server have a dynamic IP?
Mine does. And PushMail is only active during the day. The daily disconnect of my provider is somewhen in the night. So when Active Sync starts again the following morning it's beeing confronted with another server ip. Maybe that's a possible reason?!
Has anyone had success beaming contacts or appointments to another XV6800 after the DCD 2.3.2 upgrade? I can not connect with my wife's XV6800 - her's has the stock ROM still.
IF IR is hosed - is there a way to do this with Bluetooth?
SOLUTION - The only change I made to the 3.0.0 ROM was to modify (thanks azclown) as follows:
; ***** Disable IR Beam *****
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000000 <--------- change to 00000001
Then I found out that Pocket Informant 8 was the rest of my issue. I can beam now and send contacts or appointments via bluetooth. The option to send via bluetooth is no longer displayed on the PI8 menues, but just select beam - then when the beaming dialog comes up it will first try to find a IR beaming partner - wait and it will start selecting bluetooth devices next - pick the one you want and voila!
j-squared said:
Has anyone had success beaming contacts or appointments to another XV6800 after the DCD 2.3.2 upgrade? I can not connect with my wife's XV6800 - her's has the stock ROM still.
IF IR is hosed - is there a way to do this with Bluetooth?
Click to expand...
Click to collapse
When stock, I was able to beam files from my laptop to my phone using the laptop's send-file-over-BT utility. I can no longer do this under DCD 2.3.2. Perhaps our issues are related. The radio itself works (BT headset functions fine), so it's something in the new software.
Guys, I think he has IR Beam disabled....
; ***** Disable IR Beam *****
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000000 <--------- change to 00000001
this should enable beaming and IR.... I'm not 100 percent on this so if someone else knows better please speak up.... All I know is that I can xfer files using Beam..... edit this using any standard reg editor....
No dice...
azclown said:
Guys, I think he has IR Beam disabled....
; ***** Disable IR Beam *****
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Obex]
"IsEnabled"=dword:00000000 <--------- change to 00000001
this should enable beaming and IR.... I'm not 100 percent on this so if someone else knows better please speak up.... All I know is that I can xfer files using Beam..... edit this using any standard reg editor....
Click to expand...
Click to collapse
I made this change, recooked the Rom in the kitchen and no dice. My souped up XV6800 can't connect with my wife's standard ROM XV6800 (no small amount of teasing going on over this!)
Any other ideas?
im dealing with this same thing. just wondering if anyone else had any more insight
Same issue in DCD 3.0.0
I'm using the kitchen almost stock from DCD, I switched to Verizon, anded the HTC X key and adobe reader, but that was it. The only other change I made was that listed in my previous post to enable beaming. That does not seem to do it. Is there, perhaps, some other item in the kitchen that DCD removed that further disables beaming?
i am just using the base image that dcd compiled the time before the kitchen came out. i think its 2.3.2. when i went into that registry setting, my enable was already set to 1. i hate to say this (never thought i would) but i really need my IR haha
Had this same problem but finally got it to work out last night. I'm using DCDs 3.0 rom. 1st make sure under HKLM\software\microsoft\obex IsEnabled is set to 1. Next make sure under comm manager settings ---> bluetooth ---> mode tab ---> turn on bluetooth and "make this device visible to other devices" are both checked. Also check and make sure under settings ---> connections tab --->beam ---> receive all incoming beams is checked. That should do it. I got it working fine last night on 2 different moguls.
liemydude said:
Had this same problem but finally got it to work out last night. I'm using DCDs 3.0 rom. 1st make sure under HKLM\software\microsoft\obex IsEnabled is set to 1. Next make sure under comm manager settings ---> bluetooth ---> mode tab ---> turn on bluetooth and "make this device visible to other devices" are both checked. Also check and make sure under settings ---> connections tab --->beam ---> receive all incoming beams is checked. That should do it. I got it working fine last night on 2 different moguls.
Click to expand...
Click to collapse
Using 3.0.0 also - I tried that change to the obex IsEnabled key - and still nothing.... did you include anything else in the 3.0.0 kitchen?
Guys you do not need to mess with the registry to enable OBEX. Just go to the comm manager and enable Beam and also go to the connection settings and enable the beam from there. Make sure you able visible in bluetooth also.
I did this and was able to send files using the OBEX through bluetooth.
Try it out.
edit. you will notice that once you do this that you check the settings in the registry that obex will go from 0 to 1 in the registry.
my bluetooth works perfect. what i need is the ability to IR. any insight on the IR problem specifically?
Mills00013 said:
my bluetooth works perfect. what i need is the ability to IR. any insight on the IR problem specifically?
Click to expand...
Click to collapse
IR uses OBEX i believe. And when you want to send something through OBEX it uses the same protocol for bluetooth and IR. (Beam Feature)
What exactly is wrong with your IR. Because I tested mine and it works when i sent a document to my old Moto Q.
[email protected]$ said:
IR uses OBEX i believe. And when you want to send something through OBEX it uses the same protocol for bluetooth and IR. (Beam Feature)
What exactly is wrong with your IR. Because I tested mine and it works when i sent a document to my old Moto Q.
Click to expand...
Click to collapse
Carlos - did you include the enterprise section or some other section from the kitchen - maybe that is helping you because I do have all of those settings as you described and still can not beam or set up for obex bluetooth transfer.
j-squared said:
Carlos - did you include the enterprise section or some other section from the kitchen - maybe that is helping you because I do have all of those settings as you described and still can not beam or set up for obex bluetooth transfer.
Click to expand...
Click to collapse
No I did not include the Enterprise Settings, but I will on my next ROM (other reasons)
So you made sure that you enabled beam on the Comm Manager and on the connections settings for "beam" turned on bluetooth and made your device discoverable?
From there where you able to pair with a bluetooth device? such as you enabled the required authentication tab on security and connected to another bluetooth device?
P.S. What exactly are you trying to OBEX to? Are you sure that the computer or phone has OBEX enabled or that the settings are set the same to yours?
From there when you try to beam a file or receive a file what errors do you get?
I dont get any. I just right click an object select beam and make sure that the other device is visible and i send it to the device.
I think I found the problem....
I have beaming and bluetooth working now. The settings didn't change from my previous post, but I wnet back to my old Ipaq 4350 and beamed and sent appointments to my xv6800. Then it occured to me - the Ipaq is running on Pocket Informant 7 not the new version 8 in my xv6800.
I tried sending files via bluetooth and IR beaming from Resco file explorer and it works fine - so I think my issues are with PI8. I'll head over to the web-is forums for that....
solved
See first post - I added solution there.