Well i've tried installing both on main mem. and storage card and both have same results. Basically whenever someone calls my stock Caller ID shows up first with the contact, but then S2U2 pops up with Unknown Caller, yes I want to use S2U2 caller ID rather than stock, but I was just wondering if anyone has had this happen to them and if there is a fix. thanks
I'm running Mighty Rom 4.12
i am having the same problem on KevanK's 1.8 rom as well. Just for the record his rom has the black S2A dialer in it which interferes with s2u2 at times.
Same thing here
It doesn't do it all the time but it does a lot of the time. My rom has the black S2A dailer and it never did that with previous versions. Does A_C know yet??
anyone help? ):
Having the same problem. When I test it out, the Caller ID works fine. But if the phone sits for a period of time and I get a call, it rings and vibrates but all I see is my S2U2 unlock screen with no caller ID or notification.
I have the same problem and i'm using the stock rom
I just cannot reccommend against S2U2 enough. I had it on my phone for months and man the amount of calls I would miss, or people would tell me my phone rang for like 30 seconds before I answer and my TP ran for like 5. I would WHOLEHEARTEDLY reccomend Hold End Key for Lock and the Blackstone Slider for CDMA instead.
I do REALLY miss that blazin' full screen Caller ID though.
Related
My phone has been great since updating to DCD's latest cocktail but today I started having a really weird problem.
I would manually dial a number in the dialer screen (# was not in my contacts) and it would instead dial a similar number of one of my contacts. Tried it 5 times and even tried soft-resetting and it kept doing it.
After the soft Re-set and clearing my call memory it started choosing a different number to call but still the same issue. The numbers is chose were very similar, all had the same area code and the 1st 2 numbers were the same but after that completely different.
Is there a way to go to the stock dialer? I'm on a Verizon 6800.
Thanks.
Dbl_Tap said:
My phone has been great since updating to DCD's latest cocktail but today I started having a really weird problem.
I would manually dial a number in the dialer screen (# was not in my contacts) and it would instead dial a similar number of one of my contacts. Tried it 5 times and even tried soft-resetting and it kept doing it.
After the soft Re-set and clearing my call memory it started choosing a different number to call but still the same issue. The numbers is chose were very similar, all had the same area code and the 1st 2 numbers were the same but after that completely different.
Is there a way to go to the stock dialer? I'm on a Verizon 6800.
Thanks.
Click to expand...
Click to collapse
Are you talking about smartdialing? If so this is normal
What it is doing is that when you dial a number whether it is in your contacts or not, it is trying to recognize numbers that you have dialed. If it matches it will display the name of the contact and options to give information.
But if you keep dialing and the numbers don't match with any contact then nothing will appear. It will just let you dial the number that you are trying to dial with out having to look through a familiar contact.
it was doing the smart thing narrowing it down as I entered more numbers but after the 6th number nothing matched so it showed just the number in the dialing section of the screen. Hit the send button and it would then choose a contact to dial instead.
Dbl_Tap said:
it was doing the smart thing narrowing it down as I entered more numbers but after the 6th number nothing matched so it showed just the number in the dialing section of the screen. Hit the send button and it would then choose a contact to dial instead.
Click to expand...
Click to collapse
Hmm that is odd... If you dont really use Smart dial, try disabling it in the options menu of the dial screen. This might help. Are you running a custom ROM or Stock?
DCD's newest custom ROM with the custom dial. I was hoping there was a way to load the stock dialer instead to see if that helped.
Wow... funny, I had the same thing happen a few times exactly as described. I dialed the complete 10 digit number and instead it dialed one of my contacts with the same area code and partial prefix. I figured it was just me.
I'll try disabling Smart Dialing and see if that fixes it.
Also I looked at the numbers I called and I was trying to dial XXX-761-2056 but it dialed XXX-709-8039 so not even close. The other time it tried dialing XXX-701-5325.
Dbl_Tap said:
Also I looked at the numbers I called and I was trying to dial XXX-761-2056 but it dialed XXX-709-8039 so not even close. The other time it tried dialing XXX-701-5325.
Click to expand...
Click to collapse
So you guys cooked your own ROMS and when you cooked it you put the Vogue Dialer , Vouge Skin, and Smartdial?
Or the Stock Titan Dialer ?
Because I installed the Vouge options with smartdial and mine works perfectly.
I will provide you with the Mogul / 6800 Big Button CAB which will replace your dialer and the Touch Skin CAB to skin the dialer.... This might work "you can always uninstall it"
I didn't do any cooking, I just took DCD's basic ROM and loaded that but it came with a different dialer than stock for the XV6800.
I'll give those dialers a shot, that a lot.
Turns out that this is the same dialer as the one built into DCD's ROM but what is interesting is no numbers showed on the keypad. It also showed up as HTC HTC Home for the install in remove programs
Well crap. Turns out the HTC HTC Home listing in remove did remove the HTC home plug in but not the dialer and now I've got not #'s on the keys. I can't find the uninstall line for this dialer, any ideas? Oh wait think I found it. The Bullfrog Big Button Dialer right?
I installed the Wizard reTouched dialer (installing it will fix your no number issue). I haven't tried just dialing a random number though... lemme give it a shot.
Ok, I just tested it and it worked fine, let me find the dialer. It looks EXACTLY the same as the "stock" one in DCD's rom, but I found it's a little different.
Ok, here it is, it's attached in the first post of this thread. There are some skins for it too.
http://forum.xda-developers.com/showthread.php?t=315685
I noticed that when I tried to skin the stock dialer it didn't skin right. I'd have no numbers, or some of the buttons wouldn't map right. I installed the dialer in the thread above and I was able to skin it fine, and it makes calls without issue.
P.S. The test number I dialed has the same area code and exchange as a few contacts.
Oh, and the Wizard dialer will show up in your remove programs list.
You guys need to install the Big Button dialer along with the Touch CAB
The Big Button Dialer just installs the Dialer and the Touch CAB skins the Dialer with the key pad.
I have tried the Wizard Retouched one, but I removed it because it looks wack to me because you can't modify it like the big button can.
So for those with not having a dial pad
Install the Mogul Big Button Dialer
Then
The Touch CAB
Or they can pick whichever one they prefer.
You know, choices and all...
J Shed said:
Or they can pick whichever one they prefer.
You know, choices and all...
Click to expand...
Click to collapse
True, but after all it was an opinion not a fact.
Fact is that with the big button dialer and the Touch skin cab it is easy to make your own skins by replacing the ones that the Touch skin cab created.
This is meant for true modifiers. Because you wont have to be installing cab after cab after cab or even worrying about getting a gsm dialer that removes certain features on your phone.
Since I really don't care for the custom dialers I deselected the dialer skin and the smartdailing in DCD's kitchen. Now I have an original WM6 Dialer with WM6 smartdialing and I really like it.
[email protected]$ said:
True, but after all it was an opinion not a fact.
Fact is that with the big button dialer and the Touch skin cab it is easy to make your own skins by replacing the ones that the Touch skin cab created.
This is meant for true modifiers. Because you wont have to be installing cab after cab after cab or even worrying about getting a gsm dialer that removes certain features on your phone.
Click to expand...
Click to collapse
UPDATE
I am assuming you guys use CDMA since it is a TITAN Forum. Be advised that using the Wizard Touch Dialer will not only give you memory leaks, BUT
also disable the ability to use 911 and other features such as the advanced configuration mode on your phone.
Check out post 170 on the same link that redirects you to the Wizard dialer
http://forum.xda-developers.com/showthread.php?t=315685&page=17
Workaround
I have found that when you are dialing a number that is similar, or if it happens more than once, push up on the directional pad after dialing the number which deselects the smart dialing number in the window. then press the green button as usual. This seemed to help and hasn't done it for me in several days.
Serf, Since I'm a newb at custom ROMS I didn't do the kitchen thing. Maybe I need to give that a shot so I can get the stock dialer back.
This dialer is really aweful considering there is no smart dial..
plus you cant tap the contact and have their numbers popup so you can choose which you want to call.
these are basics of wm and i dont have these features. I love the phone and it's features, but smart dial is extremely important to me and im sure to others as well.
is there something i can do to replace the dialer?
help if you can
Thank you
There is Smart Dial on my Sprint Touch Pro. The thing that bothers me is everytime you touch a name under the dialer it automatically starts calling them. I would like it to go to the contact so you can pick which number to call.
bombzhome said:
There is Smart Dial on my Sprint Touch Pro. The thing that bothers me is everytime you touch a name under the dialer it automatically starts calling them. I would like it to go to the contact so you can pick which number to call.
Click to expand...
Click to collapse
You have to click on the input bar at the very top of the screen before you touch a name. This will search instead of dial.
bombzhome said:
There is Smart Dial on my Sprint Touch Pro. The thing that bothers me is everytime you touch a name under the dialer it automatically starts calling them. I would like it to go to the contact so you can pick which number to call.
Click to expand...
Click to collapse
Use your D-pad to scroll through the numbers, press Left or Right after you see the name.
Possible threadjack...
...How do you input extra numbers to be dialed after the phone number, i.e., to dial a pause and your password for instance).
I thought it was "," but that didn't work. And for short numbers like traffic "511" plus the highway, I put in 511,4951 and it converts it to 511-4951.
^^ the letter p is for pause and w is for wait ^^
darwinbrewer said:
You have to click on the input bar at the very top of the screen before you touch a name. This will search instead of dial.
Click to expand...
Click to collapse
Too bad you can't make the input bar a little bigger, I find it hard to tap the input box without using the stylus. Most times I can tap everything with my finger but that input box always messes me up.
I use the Sprint Automatic Speech Recognition (ASR) feature almost exclusively now to dial numbers from my Contacts. Regardless of what Sprint calls it, it's Microsoft Voice Command and it works quite well. There's no training and you don't have to record voice tags. It just works
It even works well with a Bluetooth headset. Just tap the answer/call button on the headset and tell your phone who to dial. If there's more than one number for the contact, it will ask which one to dial. I rarely take my phone out of the holster to make a call.
Pete
PGRtoo said:
I use the Sprint Automatic Speech Recognition (ASR) feature almost exclusively now to dial numbers from my Contacts. Regardless of what Sprint calls it, it's Microsoft Voice Command and it works quite well. There's no training and you don't have to record voice tags. It just works
It even works well with a Bluetooth headset. Just tap the answer/call button on the headset and tell your phone who to dial. If there's more than one number for the contact, it will ask which one to dial. I rarely take my phone out of the holster to make a call.
Pete
Click to expand...
Click to collapse
Yeah, I dial everyone with it unless there's too much background noise. I LOVE it.
You can also tell it to start programs by saying "Start " then the program name, OR, you can tell it to play media files by saying the same thing. You can even ask it for the date and time and your battery level. I never even really knew how good it was until I used it. Not one review I read talked about it.
i dont think you guys understand what i am saying... i owned the xv6800 for 2 years and the i760 also... smartdial does work on the touch pro but when you hit the number with your finger it calls that number.. with the xv6800 and i760 you tap and hold and all the contact info comes up in a little popup and you tap the number you want to call..
as for the dpad.. the dpad takes alot to get use to..it's too easy to make mistakes using the dpad.
i brought back the original dialer through the reg and it still did not help. htc has completely taken over the os with their proprietary software. not too smart on their end. i have also disabled the touch flo and you get the same ugly white dialer.
Just read!
And the answer you were given in this thread is that when you see the number in your call history, you use your d-Pad to scroll through the numbers in your directory and when you see the one you want you hit enter and your phone will "F"-ing dial it. Can you not read?
itster2 said:
i dont think you guys understand what i am saying... i owned the xv6800 for 2 years and the i760 also... smartdial does work on the touch pro but when you hit the number with your finger it calls that number.. with the xv6800 and i760 you tap and hold and all the contact info comes up in a little popup and you tap the number you want to call..
as for the dpad.. the dpad takes alot to get use to..it's too easy to make mistakes using the dpad.
i brought back the original dialer through the reg and it still did not help. htc has completely taken over the os with their proprietary software. not too smart on their end. i have also disabled the touch flo and you get the same ugly white dialer.
Click to expand...
Click to collapse
In my dialer, it has a Contacts button in the lower left corner. If you use that, then it works the way you describe: click a contact and then you can pick which number you want to use. Doesn't everyone have this?
I agree with the OP. I would like to have smart dialer access Contacts so that I can quickly pull up someone's full contact info and then decide which number to call. I also try to avoid using the D pad because it isn't 100% accurate (or at least not for me) and I have had trouble dialing the wrong number or person inadvertently.
Trying to use the current Contacts option isn't very finger friendly for me.
Update - I just used Advanced Config to turn off the dialer skin, and now I have what I was looking for. At least with Sprint, the basic dialer has smart dial that allows you to tap a contact and it brings up the persons contact info, rather than just dialing their default number. I'm going to give this a try for a while.
I use Spb's Mobile shell to do as you describe.
http://beta.spbsoftwarehouse.com/products/mobileshell/screenshots.html
QWERTY stuck on compact, wont change to Full
I have been doing some tweaking to my phone and after adding the black dialer, my QWERTY that displays with messages is the compact and not the full anymore. I have tried to change it in the Today section but it keeps reverting back to the compact style. I have not been able to locate the cab file to delete it. Any help would be great, thanks I should specify, I am using the touch pro
Don't know if anyone else is having this problem with the new iPhone-style dialers: Dialer installs fine; looks great. However, the phone locks up under this scenario:
1. dial number which will require a password entry (e.g. to retrieve voice mail) and press talk
2. prompted for password
3. password entered
4. click on "call status" to turn on speaker phone or mute, for example and phone freezes up. I can still hear the call but none of the keys on the phone work.
What I have figured out is if after the call connects I don't use the keyboard I can click on call status and everything works fine. As soon as I use the keyboard in the middle of the call and click on call status the phone freezes. Something about using the keyboard and switching to call status makes the phone freeze up.
This is very frustrating because I really like these dialers. Any help would be greatly appreciated.
Verizon XV6800
Rom:3.08.666.1
Radio: 3.42.02
WM v 6.1 (Build 20931.1.5.0)
Greetings all!
I have an HTC Touchpro (Raph800) from Alltel. Yes Vzw is my current provider due to the buyout, but i still use my alltel phone. I recently upgraded it to wm6.5 using the mighty rom. Awesome rom btw! So far everything is working great, save for the bluetooth dialer in my car. it worked great under wm6.1.
I'll give you an example:
I press the button on the steering wheel to make a call.
I hear, "Make a call. Say by Name, By Number"
I say, "Name"
I hear, "Say the name of the person you wish to call."
I Say , <Insert Name Here>
I hear, "Call", <name from above> , "on which number. At Home. On Mobile"
I say "On Mobile"
I hear "Say yes to dial. Or, say back or cancel."
I say, "yes"
I hear "Dialing", <name from above> , "on mobile." Then a bunch of DTMF tones probably to simulate dialing because they always sounf the same for any nimber in my address book.
What is suppose to happen next: (What happend on wm6.1)
My dialer shows up on my screen and it dials the number in my address book and makes the call.
What is happening:
Nothing. Nothing on my phone changes and after 30 seconds of waiting the system times out and goes back to playing music through the speakers.
The only I can get this to work now is if i already have the dialer app open, wich makes the whole process pointless because my contacts are just one more tap away. If I dial from the phone the car system works has a hands free device. I can also answer calls from the steering wheel controls. When the phone is ringing the dialer app is running so I think this is why. I just cant dial from a cold start like I used to under wm 6.1.
Any ideas? Complaints? Gripes?
btw, the car is a 2011 Kia Sorento.
Thanks in advance for any information.
[Update]
Now for whatever reason, the bluetooth dialing is completly not working. Is there another dialer that would work? Or am I screwed?
[/Update]
Hey guys, I was wondering if there is anyone else experiecing this problem.
Recently whenever I receive a call, now the Call Display screen is not full. Now what comes up is the Top Part of the Blink feed Screen. The part that shows Time and Weather and below comes up the caller ID and number calling. This never used to happened before. When someone called it always showed full screen of a call, for example Pic of person calling.
I checked all my settings and dont see anywhere that shows how to fix. Not sure if this a bug or something.
I am running Stock and on Kitkat.
I also tried disabling BlinkFeed and it still happens.
Any suggestions
Thanks
Henry R