Related
help, i have just got an ameo and previously had an xda exec, which i unlocked,then a Mda pro(universal) and installed wm6 which works great compared to wm5, i have tried using olipro unlocker on the ameo... an had an error message at stage 1 flash SPL....TRIED IT TWICE AND the phone is completely dead... doesn't charge or switch on .. i have unlocked and upgraded on two models so i do have a clue.....i should be getting a replacement, but really need to run it on wm6 as i believe it works a lot better as with my Mda pro.
could you pls tell me which is the right toolor a link to unlock and upgrading Ameo (uk) to wm6.There are so many threads i cant tell which tools have been tested and works....Can afford to brick the new one
Many Thanks for your time
email or IM to [email protected] i'll show you how to do it !!! If...i'm there
digigem said:
help, i have just got an ameo and previously had an xda exec, which i unlocked,then a Mda pro(universal) and installed wm6 which works great compared to wm5, i have tried using olipro unlocker on the ameo... an had an error message at stage 1 flash SPL....TRIED IT TWICE AND the phone is completely dead... doesn't charge or switch on .. i have unlocked and upgraded on two models so i do have a clue.....i should be getting a replacement, but really need to run it on wm6 as i believe it works a lot better as with my Mda pro.
could you pls tell me which is the right toolor a link to unlock and upgrading Ameo (uk) to wm6.There are so many threads i cant tell which tools have been tested and works....Can afford to brick the new one
Many Thanks for your time
Click to expand...
Click to collapse
If you have bricked one device don't try it again. There are issues being worked out with the unlocker.
Second, there is a ROM you can use for your Ameo that should install without being unlocked and based on WM6. It's on the forum somewhere. I don't remember where it was posted so you'll have to search.
Let us know how it goes....remember you don't need to unlock if you find the right ROM...the WM6 ROM for an Ameo/Tmobile device.
Thanks people. T-Mobile can go to ....
On my third Ameo running wm6 pro.olipro unlocker v2 should do the job i heard but intsalled the rom which run on t-mobile ameo. Dont know what the difference with the black touch version is ... i cant complain ..well for the moment . Thanks again People!!!!!
The T-Mob ROM works without unlocking but Olipro V2 worked fine on my UK Ameo which allowed me to install Black Touch which, thanks to PK and the team, is far better.
Hi,
I try a few weeks ago upgrade my Spv m600 to WM6, to put gullum touch rom, but the upgrading wasn't been sucessfuly.
waht happens was i upgrade the rom without CID unlock, a check later the model was a G4, and now my phone freeze on first screen. I try change the rom like wiki explain, put a NovenderID rom, the original orange uk rom was on ftp of xda, but nothing can solve my problem!
So a open this new thread, for ask if someone have the official Orange UK rom for prophet, without that rom i can't repair my phone!
Thanks for all, and best regards!
Gats
gats said:
Hi,
I try a few weeks ago upgrade my Spv m600 to WM6, to put gullum touch rom, but the upgrading wasn't been sucessfuly.
waht happens was i upgrade the rom without CID unlock, a check later the model was a G4, and now my phone freeze on first screen. I try change the rom like wiki explain, put a NovenderID rom, the original orange uk rom was on ftp of xda, but nothing can solve my problem!
So a open this new thread, for ask if someone have the official Orange UK rom for prophet, without that rom i can't repair my phone!
Thanks for all, and best regards!
Gats
Click to expand...
Click to collapse
How about the PVtemp rom? same result?
please have a look in my thread ( @ my signature )
You can take a look in 4shared, and search for
PROPHET_ORANGE_UK_ROM.zip
maybe you have to put your prophet in bootloader (search XDA if you don't know how) and flash in the old way
hope you cab fix it
dioxda2 said:
How about the PVtemp rom? same result?
please have a look in my thread ( @ my signature )
Click to expand...
Click to collapse
Yha, i try PVtemp, but when instalation was complete and phone restart, that will freeze on first screen!
I will try the original rom from orange link given by humrod.
thanks for your replys guys.
The ROM is already on the FTP/Wiki!
ftp://xda:[email protected]/OrangeUK/Prophet_Orange_UK_ROM.zip
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
loginvicky said:
guys and gals plzz help , i tried updating my htc athena i.e, x7500 to radio 1.57 now the device boots and gets stuck on the htc logo screen and for hours togather it does not move forward plz help what could be the problem and what is the remedy , i am really afraid as this device is my bros, and he would kill me if he finds this out....plz help ???
Click to expand...
Click to collapse
do you have spl 1.2 or 3.5 and can you get to Bootloader screen ( that tri color screen)
spl 1.2 and to get to the tri colour screen wat sud i do ???????????
plz help irius wat next ????????????
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
to get to bootloader press camera + reset and make sure you don't have mini sd card in
loginvicky said:
plz help irius wat next ????????????
Click to expand...
Click to collapse
Hi
Don't Panic. Press cameraButton+ Reset by stylus for few seconds then you get the tri colour screen.
Then you you update again with Radio 1.5.7.000. You will be ok if you have spl 1.20
Good Luck
God bless you both, thank god the tri colour screen did appear but when i tried the radio rom 1.57 flashing again, it goes till 7 percent then again shows error of rom image file corrupt please check kinda stuff, this is the same error which i got umpteen times after which the athena got stuff in the htc logo mode ........... still its there and yes that tri colour screen does come up.... plz help what to do next........ i dont want want to upgrade my radio now ...its ok even if i am able to boot in to my old good 6.0 os...., also the bootloader is 1.0 version not 1.2 .........plz guys help i really would pray to god to bless ur souls........ u are doing a fine job thanks.....
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
just lemme know if any ruu i could use in the bootloader mode that should bring to life my now almost bricked dopod............plz smbdy helpppp
loginvicky said:
plz still stuck on tri colour bootloader , cud somebody help getting
athe100
ipl-v1.0
athe100
spl-v1.10.0000
hi, please help had downloaded irus ultra vanilla 83.4mb file but its a zip file for spl 1.2 version no ruu so how do i flash my device
Click to expand...
Click to collapse
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
sabes143 said:
Hi
You can't update any other roms other than your original rom. Because your device still on SPl 1.10 factory ststus. Therefore you have to find the original rom which came with your device. you can find in this forum by search depend your device model (consider these X7500/X7501/ Dopod U1000, Uk/German/Italy/Usa, Tmobile/AT & T ) or Go to HTC website with your device serial number you will be able to download your device original rom.
Download your original rom and load it.
Then use Olipro's unlocker to unlock the CID from http://forum.xda-developers.com/showthread.php?t=398406&highlight=olipro (But read the thread first carefully)
Then you can upgrade any radio or any other rom.
good luck
Click to expand...
Click to collapse
After the above you'll be in spl1.2. You can only flash spl 1.2 based Rom. Do not use any SPL3.5 ROM
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
loginvicky said:
thnks a ton eaglesteve and sables well what if i want to upgrade to spl 3.5 what sud i do.............
Click to expand...
Click to collapse
Are you sure you want to get there? It is a one way street. You can't come back once you get there. This means you would have less choice in ROM. You can't run your original ROM anymore. If you need to send it in for warranty, you may have problem as you would have clearly shown that you have voided the warranty condition (depending on how alert the service guy is, you may or may not be caught, but just because many manage to get away does not mean that everyone would get away) You must have got the wrong impression that it is better. It is not the case. Many who are there are waiting to come back, but can't for now.
Everything you get in spl3.5 ROM you can get in spl1.2 ROM, except with spl1.2 ROM you have more memory for yourself.
Think carefully, and think again, and again, before you get there.
--------------------------------------------------------------------------------
hi...
please someone help me,
today i upgraded to a new wm6.1 Rom for HTC P3400 which was posted in gene forum here at XDA Developers , after successful upgrade my phone restarted n got stuck at bootloader.
i hv tried almost every solution avaible at Forum XDA developers, but still same condition.
i hv hard reset it several times, also gave unsuccessful try to Mtty , and gene unbreak.
please someone tell me how to unbreak my device, becuz i hv gone through almost every solution, but nothing working.
ther is solution for newer genes in "Gene Forum" but tht also not workin on my old gene.
and please tell me that can i send it to HTC india, as it is still under warrenty.
i m afraid that they wont repair it as i was using custom wm 6.1 roms
so please somebody help me out. i m really in grt tension....
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
krazy_about_technology said:
DUDE YOU WANT TO TROUBLESHOOT AND STILL NOT POSTING ANY INFO ABOUT YOUR PHONE? WHATS WRONG WITH YOU?
Sorry for the caps, but Please post ONBL, SPL etc if possible
then only a solution can be derived. Post everything that you can remember aboout your phone as well as what is written on the sticker at the bottom of the packaging box of your phone.
And please dont post full serial no, only the first 3 numbers like HT8xxx or HT7xxx etc.
See you.
Click to expand...
Click to collapse
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
hksin1988 said:
dear frnd sorry for my mistake....
my phones serial no is starting like HT807XXXXXX
but its not P3400i, its was having WM5 by default
even hving HT8XX serial i was successfully using all the ROMs Including fusion, PDAViet etc etc, ther was no problem
but problem started when i upgraded my phone to WM6.1 Stock ROM
http://forum.xda-developers.com/showthread.php?t=461351
i think this ROM is provided by u.
it was shown that rom is for devices with serial HT8XX,
so my phone is also HT8XX, thn i gave it a try, upgrade was successful,
but after ungrade device rebooted and my phone got stuck at bootloader only.
Showing info like this..
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.79.90
OS 1.7.0.0
AND my 1st boot screen is also changed since i upgraded to PDAViet rom
so is ther any way to restore original HTC white logo bootscreen.
hey i think this is just an old gene with HT8XX serial, becuz all the Roms were working good.
and for the 1st time i upgraded to Rom for HT8XX and my phone got bricked.
hey please............................................... help me out
and lemme know if u want any other info abt phone.
i m online most of the day, so please reply as soon as possible....
Click to expand...
Click to collapse
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
npiyanut said:
Just flash it with WM6 Original ROM (India) guys, I don't see much improvements in WM6.1, and your SPL is original. Do it in the BootLoader Screen, and flash it via RUU.
Click to expand...
Click to collapse
hey i tried upgrading to original wm6 but it always shows error at 2%, "Invalid Vendor ID" n my phone gets restart.
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
krazy_about_technology said:
Budyy i have said on that page that i had only tested it on my P3400i and its working great till date. HTC has created such a mess with all these 3 versions. I think the mystry is now solved, and Those with the older gene with WM5 ROM but Serial No HT8xx can install the WM6.1 stock (look-a-like) ROM only if ONBL version greater than or equal to 1.10.000.
I'll update the info in WM 6.1 Stock ROM thread too. That ROM is not provided by me, i just copied it and mirrored it from 4PDA.ru so cant tell you much.
@npiyanut: Yeh you are right, but i think instead of flashing WM 6 stock ROM he should flash the Original WM5 ROM as the original WM6 ROM for P3400 doesn't have the OnBL, SPL etc updates. It just has the OS and extROM parts and that i have confirmed by dumping the ROM myself. SO WM5 ROM will solve the problem i guess and then he can continue with any other ROM he had tried successfully in his previous experience. What do you say?
Click to expand...
Click to collapse
I tried upgrading to stock WM5 Rom given here
http://forum.xda-developers.com/showthread.php?t=382063
but while ungrading it is showing Invalid Vendor ID, and my phone is getting restart ...
so ,,,,,, is ther anyway to hspl my phone or something ???
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
hksin1988 said:
and i also tried this WM5 Rom also
http://forum.xda-developers.com/showthread.php?t=375553
but still......invalid vandor ID at 2%
nd...no progress..........!!!!
3 days...without phone....its just like hell !!!
Click to expand...
Click to collapse
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
rakesh_4utoo said:
Bro "
Feeling very sad for your Phone.
Can you give me the screen shot where you stuck?
I know u provided all necessary Info ,but pls it may help me out.
Take a snap of your phone screen with another phone and upload it.
I flashed that rom that u have flashed (WM6.1 stock rom mirrored by crazy_about_tech.) and mine also stuck in boot loader,
but immediately just flash back Fusion 9 and my phone alive again.
Please don't blame anyone for anything.
Here, all are together for helping each other and sharing their PDA experiences not making anyone's phone DEAD.
Click to expand...
Click to collapse
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
How to remove Smart Mobility Boot Screen
Hey Guys please also tell me that how can i remove this Smart Mobility Boot Screen and revert back to Old HTC logo White screen...
any solution ???
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
ramersonw said:
Looks like you need to do a hard-spl again before you flash another ROM.
Try orefcov method here
Click to expand...
Click to collapse
i hv already given this a try.....but ended up getting error all the time.....
i tried Mtty i dont know how many times but in last the error comes
and one more thing.....tht unbrick solution is for P3400i and newer GENEs (HT 8XX), even my phone's serial no starts frm HT8XXX, although it is old version.....ONPL is 1.07.0.0 ...
while in newer genes it is 1.10.0.0 n more
so this solution wont apply on mine...
BUT Still i gave it a try.......not workin for me...
hksin1988 said:
First of all....i m so sorry for my behaviour....if anyone felt bad.....100times sorry..and i m blaming No one.....
even i m very happy to be a member so such a great forum....which gave me good knowledge all the time.....
anyways.......here r some screen shot wher i my phone is stuck...
please ask me...if any more info needed.....please guys,,,,help me out here....
m very stressed....
Click to expand...
Click to collapse
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
rakesh_4utoo said:
Oh ,earlier you were using wm 6.1 by PhamQuang ,that's why your splash screen changed but this is not a big issue,Once your phone alive again this can be solved in minutes,
Try this(I don't know you tried it or not)
plug ur phone to PC and reset ur phone keeping the camera and the power button pressed.
If you see the tricolor screen with a Text USB in left bottom corner of your phone, leave the buttons or try again ,Once tricolor screen appears then only you can flash your original Wm5 (24 march 2007.exe) because your SPL is original till now.
http://forum.xda-developers.com/showthread.php?t=382063
try it.
Click to expand...
Click to collapse
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
hksin1988 said:
Yes sir.....i hv already tried it......
i did the same........enter in bootloader..the tricolor screen....atteched to USB....in phone it was also showing the text USB in left corner..
than i tried to flash original WM5 rom (24 march 2007) ......but alas.....the same problem......error at 2% sayin "Invalid Vendor ID"
Click to expand...
Click to collapse
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
rakesh_4utoo said:
Your Splash screen also may made ur phone's warranty void.This is a big problem.let me think for a day.
My phone's Sn is HT7XXXX
Click to expand...
Click to collapse
yea dear...think something................i m very thankful to u....tht u r takin interest in my problem.....
Finally Gene is alive......thanks to HTC service centre..
Finally i gave my phone to HTC service centre...and...ther made my gene alive once again...
Now m very happy now...!!!
i would like to thank every XDA forum member for helping me out and givin me response.
i mistakenly flashed wm6.1 stock rom which was for HTC P3400i and newer P3400, so my phone got stuck at bootloader.
i tried almost each n every solution avaible here at XDA forum , but nothing helped me out.
as each time it was showing me error in flashing back to original ROM.
finally i gave up and decided to give my phone to HTC service centre since it was under warrenty...
so...now my phone is OK....it has original wm5 once again.,,,
and i will flash to Fusion 9.0 rom tonight.....
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
hello Rammi
rammi081 said:
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
Click to expand...
Click to collapse
hello there, in fact i have helped a friend to flash his WIZARD with the same IPL/SPL as yours.
So it worked 4 him, i hope you can flash yours as well
by the way if planning to flash remember to have a full battery charged
hello Rammi
rammi081 said:
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
Click to expand...
Click to collapse
hello there, in fact i have helped a friend to flash his WIZARD with the same IPL/SPL as yours.
So it worked 4 him, i hope you can flash yours as well
by the way if planning to flash remember to have a full charged battery
thanks 4 your answer tigrisimo!!
Do if you have flashed a G4 ROM??
Is it sure that the 3.08.001 tells me, i am having a G4?
Tomorrow i am going to flash my mobilphone
you can flash your G4 Wizard without almost any problem if you follow the instructions correctly. Remeber to use only custom rom without IPL/SPL or you'll endup with a paper weight. HardSPL is not safe as far as I know, only SoftSPL.
good luck!
great!
rammi081 said:
thanks 4 your answer tigrisimo!!
Do if you have flashed a G4 ROM??
Is it sure that the 3.08.001 tells me, i am having a G4?
Tomorrow i am going to flash my mobilphone
Click to expand...
Click to collapse
first read all the manuals you can find on this site, if need assistance tell me!
just one more thing:
get a beer, or a cig, coffe perhaps, because the procedure is going to take about 7 mins (depends on your Computer) dont worry, if the flash procedeure stops at 99% relax, is pretty normal (it will finish in some more secs)
GOOD LUCK
Yeees it run!!!
I just did it how it is discribed in the tutorial.
Thx board!!
by the way, i was brewing a cup of coffee when the mobilephone was flashed. I came back and everything was done