Just upgraded my Titan to the Touch Pro. I see the roms have carriers built-in. Any US Cellular Carrier support working yet? Can a bare rom be made to work on any carrier? Radios? My radio sucks. 1 to 2 bars less than my Titan at home. I read that battery tweaks are mandatory to have a life. Finding it hard to determine which files are best for the model I have with so many models out there, and USCC being so new...
I also just upgraded to the TP from the Titan ... and was also wondering about cooking a rom with USCC support... is this possible yet?
Well, 24 hrs later, and I have some wishes..
the radio on this sucks.. 1.06.07... less bars, bluetooth sucks for speed on redfly.. gps seems ok though.
Battery sucks.
Otherwise, this phone rocks.. love the vga, love the feel of the hardware, love the ram..
still wondering about carriers.. don't want to break the data connection with the wrong rom/carrier... but I am ready to format this sucka.. I know the hardware is good, just in search of the right combo of software to run it right!
I've found that setting no carrier name or setting Alltel seems to work for USCC. I don't post much over here but I post over at the USCC forum on Howardforums a lot.
droobie said:
I've found that setting no carrier name or setting Alltel seems to work for USCC. I don't post much over here but I post over at the USCC forum on Howardforums a lot.
Click to expand...
Click to collapse
You mean in the kitchen for ROM cooking?
Who wants to be first to try?
Yep in the Kitchen, if you use a kitchen. If you don't, you can just install the firmware as is and usually you can just set your settings. USCC doesn't use an AKEY or anything like that.
Just make sure, no matter what rom you burn, that you should use the Clear Storage feature after installing the ROM (including the Format NAND Flash) Switch, to make sure that you have a clean workspace.
At the moment I'm using Juicy 7 no problem on my USCC TP.
EDIT: There's nothing really to try, I've already done this several times over, as has several others. Worst case there's a shipped firmware EXE and you can revert back to factory using that and the relocker. You should use 0.37 of SPL and keep your radio factory.
Where can we find the stock rom for uscc?
http://forum.ppcgeeks.com/showthread.php?t=63959
droobie said:
Yep in the Kitchen, if you use a kitchen. If you don't, you can just install the firmware as is and usually you can just set your settings. USCC doesn't use an AKEY or anything like that.
Just make sure, no matter what rom you burn, that you should use the Clear Storage feature after installing the ROM (including the Format NAND Flash) Switch, to make sure that you have a clean workspace.
At the moment I'm using Juicy 7 no problem on my USCC TP.
EDIT: There's nothing really to try, I've already done this several times over, as has several others. Worst case there's a shipped firmware EXE and you can revert back to factory using that and the relocker. You should use 0.37 of SPL and keep your radio factory.
Click to expand...
Click to collapse
Thank you very much for taking the time to answer my question!!! When you say use the CLEAR STORAGE feature.. you're talking about the one in the settings/control panel options of the OS/WM?
petermg said:
Thank you very much for taking the time to answer my question!!! When you say use the CLEAR STORAGE feature.. you're talking about the one in the settings/control panel options of the OS/WM?
Click to expand...
Click to collapse
Yep. That'd be the one.
Related
Any recommendations of which cooked ROM would be good for a Sprint Mogul aka Titan? I want to flash one that still has the live search bar on the today screen, I use it constantly and would like to keep it.
I have been testing multiple ROM's over the past few weeks and here's what my experience/opinion is. You can load any ROM and then download Windows Live since it's not included in cooked ROM's.
The 2.17 stock ROM loads up with approx 25mb free if you bypass the customizations. I don't run this one, it comes with too much crap I don't need.
DCD's clean ROM 1.5.7 loads up with approx 26mb free with the 1.40 radio. Very stable, and runs great.
DCD's alpha 2.17 based ROM loads with approx 26mb free with the 1.47 radio. Didn't seem as quick as the 1.5.7 and I experienced issues receiving calls with this ROM (had to press the answer button twice and sometimes three times). I have not run this ROM with the 1.40 radio but DCD thinks it may fix the issue I had with receiving calls. I had to soft reset with this ROM alot more than the 1.5.7. This ROM also changes the initial HTC logo that you see on a soft reset with the words "dcd's clean rom" below it. A minor issue, but I didn't like having that there.
Custel's 1.1 4MB pagepool loads with approx 28mb free on the 1.40 radio. This ROM is the quickest and most stable ROM I have ran. My only gripe, albeit a minor one, is that the data connection is named Alltel Wireless and resets itself to Alltel Wireless on a soft reset even if you change it. I use Sprint so it kind of bugs me, though it does not affect your data connection and you do not roam to another network.
I recommend using the 1.40 radio in lieu of the 1.47 radio with any ROM. I get a much better and more consistent signal with it.
HTH
Im going to try out Custels' ROM, so all I have to do is downlaod windows live and istall it on my phone? I really just want the search bar in the today screen, because then I edit the key to search google instead of live.
Yup, that's what I've done in the past. Trying to find a link for you...
jhendrickson said:
Yup, that's what I've done in the past. Trying to find a link for you...
Click to expand...
Click to collapse
Thanks!! I upgraded to custel's rom seems to be running good so far! all I need now is the search bar, greatly appreciate it if you do find it.
jhendrickson said:
I have been testing multiple ROM's over the past few weeks and here's what my experience/opinion is. You can load any ROM and then download Windows Live since it's not included in cooked ROM's.
The 2.17 stock ROM loads up with approx 25mb free if you bypass the customizations. I don't run this one, it comes with too much crap I don't need.
DCD's clean ROM 1.5.7 loads up with approx 26mb free with the 1.40 radio. Very stable, and runs great.
DCD's alpha 2.17 based ROM loads with approx 26mb free with the 1.47 radio. Didn't seem as quick as the 1.5.7 and I experienced issues receiving calls with this ROM (had to press the answer button twice and sometimes three times). I have not run this ROM with the 1.40 radio but DCD thinks it may fix the issue I had with receiving calls. I had to soft reset with this ROM alot more than the 1.5.7. This ROM also changes the initial HTC logo that you see on a soft reset with the words "dcd's clean rom" below it. A minor issue, but I didn't like having that there.
Custel's 1.1 4MB pagepool loads with approx 28mb free on the 1.40 radio. This ROM is the quickest and most stable ROM I have ran. My only gripe, albeit a minor one, is that the data connection is named Alltel Wireless and resets itself to Alltel Wireless on a soft reset even if you change it. I use Sprint so it kind of bugs me, though it does not affect your data connection and you do not roam to another network.
I recommend using the 1.40 radio in lieu of the 1.47 radio with any ROM. I get a much better and more consistent signal with it.
HTH
Click to expand...
Click to collapse
i saw somewhere a registry edit that would resolve your connection renaming itself every time...ill try to hunt it down
centtavo79 said:
Any recommendations of which cooked ROM would be good for a Sprint Mogul aka Titan? I want to flash one that still has the live search bar on the today screen, I use it constantly and would like to keep it.
Click to expand...
Click to collapse
I don't know why you don't just try them all out. There are so few that could try them all out from the time you finish eating dinner to the time you go to bed at night.
dharvey4651 said:
I don't know why you don't just try them all out. There are so few that could try them all out from the time you finish eating dinner to the time you go to bed at night.
Click to expand...
Click to collapse
someone needs to get this guy cooking roms already
on topic: does the windows live cab in my thread not include the search bar? http://rapidshare.com/files/70134089/dcd_Windows_Live_10.6.33.0600.cab.html
if not let me know ill include it
dcd1182 said:
someone needs to get this guy cooking roms already
on topic: does the windows live cab in my thread not include the search bar? http://rapidshare.com/files/70134089/dcd_Windows_Live_10.6.33.0600.cab.html
if not let me know ill include it
Click to expand...
Click to collapse
Thanks! dcd, I tried your cab as well as your rom and its seems to be working good for me, I also saw that you posted a thread with your kitchen, so here comes the noob question! how hard is it to use that to cook up a rom, is there a tut around to read about that? thanks again for the help and keep up the good work.
dcd1182 said:
someone needs to get this guy cooking roms already
on topic: does the windows live cab in my thread not include the search bar? http://rapidshare.com/files/70134089/dcd_Windows_Live_10.6.33.0600.cab.html
if not let me know ill include it
Click to expand...
Click to collapse
I'll download your kitchen and see what I can do. Building ROMs is not my specialty but who knows, maybe it'll grow on me...
dharvey4651 said:
I'll download your kitchen and see what I can do. Building ROMs is not my specialty but who knows, maybe it'll grow on me...
Click to expand...
Click to collapse
Its not that hard, only gets complicated when adding stuff not already included in the buildOS packages. DCD put together a nice little list of commonly used options, you click what you want, hit go, run a script which creates your .nbh, and flash it!
Actually I was able to make one and then test it but just ended up removing hardspl and putting the official Sprint Rom back on until I could figure out how to make something better. The only questions I have now is how add OEMS to the kitchen and will OEMS made for Wizard Windows Mobile 6 ROMs work in this kitchen for the Titan?
dharvey4651 said:
Actually I was able to make one and then test it but just ended up removing hardspl and putting the official Sprint Rom back on until I could figure out how to make something better. The only questions I have now is how add OEMS to the kitchen and will OEMS made for Wizard Windows Mobile 6 ROMs work in this kitchen for the Titan?
Click to expand...
Click to collapse
wm6 oems are wm6 oems. gsm stuff might have gsm stuff. it will (probably) build, and then you can fix/tweak it from there. if it fails due to conflicts, you need to identify the files in question, and decide which of the two needs to go. an oem is just a cab laid out. if the cab would install on wizard or titan, its oem probably would.
dcd1182 said:
wm6 oems are wm6 oems. gsm stuff might have gsm stuff. it will (probably) build, and then you can fix/tweak it from there. if it fails due to conflicts, you need to identify the files in question, and decide which of the two needs to go. an oem is just a cab laid out. if the cab would install on wizard or titan, its oem probably would.
Click to expand...
Click to collapse
Great to know. I will start building a new ROM in the morning. It's 12:27am right now and I have to get some sleep. I've been up for over 26 hours thanks to working 2 jobs. I'm off tomorrow though thanks to a huge ice storm blanketing the area I live in. Sucks to drive in but hell I needed the time off...
I honestly believe Imcokeman's Clean alltelwm5 rom is the best. It boots with 28-29mb and is way stable. I haven't had one crash for 2 weeks. Thats saying a lot (for the titan lol).
I love DCD's 1.6.8 Rom over the stock rom. i have verizon.
it is very clean and i love the memory and speed on it. it feels faster than the stock as well and i do not know why i waited so long. doing the upgrade was a bit scary at first.
Some Points:
*All the skins look smoking hot compared to the default skins, The dialer is highly functional now, almost like the spb mobile shell dialer but without the bloat or memory waste.
*i didnt even have to do a *228 to program the phone after the rom update, everything just worked, email sync, text messages, get and make calls and internet.
*27.76 megs ram free after soft reset, i bet i would have more if i used a memory releasing program like oxios hibernate. 1.71.36 megs of storage free. that was more free than i had total before for internal storage.
*it has lots of tweaks pre-applied. like the text message sent confirmation turned off. the audio volume increase tweak, the 5 meg page pool.
*very polished feel, more so than the stock rom
*faster than the stock rom. i would say 50% faster? hard to gauge, but i notice it is speedier.
I have not tried custel's rom or any other rom's, installed this one and was very happy with it.
I've recently downloaded DCD kitchen and love it. I've also starting using OEMizer and making my own ROM's. It's a lot of fun and addicting. DCD Rom's seem to be the best for me. I like the clean approach and it gives me the option to install what I want and customize my phone. The other ROMs include to much stuff I don't find useful.
This is No2Chem's new WM6.1 Rom for the Titan. I can say this rom is about 20% to 40% faster than any rom ever seen for the Titan. GPS works!!! Thanks No2Chem!!!!!
Flash ON!
Now for the link:
http://forum.ppcgeeks.com/showthread.php?p=172502&posted=1#post172502
wow, wow is all I can say, Yall work fast.
Edit: Thank you! No2Chem and DCD do so much for this Titan community.
Wow. Thank you so much. Flashing it right now!
Thanks,
Modding for custom use now.
XV6800?
Mikee4fun said:
This is No2Chem's new WM6.1 Rom for the Titan. I can say this rom is about 20% to 40% faster than any rom ever seen for the Titan. GPS works!!! Thanks No2Chem!!!!!
Flash ON!
Now for the link:
http://forum.ppcgeeks.com/showthread.php?p=172502&posted=1#post172502
Click to expand...
Click to collapse
Will this work with Verizon?
I'm a Verizon user too.
Will this work or what mods need to be done?
Are we needing to save our info again? IE ESN/MSD/ etc?
Is this carrier specific? Will it work for Alltel?
bojangler said:
Is this carrier specific? Will it work for Alltel?
Click to expand...
Click to collapse
It's made for Sprint.
But, it works on Verizon!
I came from unlocker 2.40, radio 3.27.00, dcd 2.0.0, on my xv6800.
I was able to place calls, receive calls, use data, and use GPS, all right after the flash. IOTA works too. The Sprint brand shows in a few places, but hasn't shown to adversely affect anything I've tried to do (haven't tried and don't use MMS). Apparently there's an app that fixes all branding too, although I haven't tried it.
I never had an akey in EPST to begin with, so I can't say if others will be able to flash as easily as this (since I'm not sure if that's changed by the radio or OS roms).
Need to play a while to see what's improved/deteriorated.
Thanks a ton for all your hard work no2chem!
FZ1 said:
But, it works on Verizon!
I came from unlocker 2.40, radio 3.27.00, dcd 2.0.0, on my xv6800.
I was able to place calls, receive calls, use data, and use GPS, all right after the flash. IOTA works too. The Sprint brand shows in a few places, but hasn't shown to adversely affect anything I've tried to do (haven't tried and don't use MMS). Apparently there's an app that fixes all branding too, although I haven't tried it.
I never had an akey in EPST to begin with, so I can't say if others will be able to flash as easily as this (since I'm not sure if that's changed by the radio or OS roms).
Need to play a while to see what's improved/deteriorated.
Thanks a ton for all your hard work no2chem!
Click to expand...
Click to collapse
Guess I know what I'M doing tonight....."Sorry honey...gotta love the phone first"
Nice
Nice and quick rom. Got stuck in bootloader for quite awhile when loading. Sucks up quite abit of memory compared to DCD's new rom tho. Good work!
so whats up with this new rom? 6.1 huh? so whats on the inside???
I installed the dcd 2.1.0 verizon rom with the v3.27.0 radio (following these instructions:
http://www.phonenews.com/how-to-add-gps-to-htc-mogul-xv6800-p4000-titan-2663/)
and everything went fine but now my device is freezing up and generally not acting healthy. Can anyone vouch for this set up and/or recommend the best current rom for verizon? Im not too concerned with having GPS available (but would be nice), I would really like to have a nice no junk rom above all else. Thanks for any advice.
I haven't had good luck with any of the gps/reva roms on verizon... Seems every rom combination has it's share of quirks/bugs it's just a matter of finding the one that has some u can live with
I'm yet to find one that is FLAWLESS... if you find one let me know!
I have flashed several VZW xv6800s. If you have the 3.35 radio just flash DCDs latest (3.0.4). It runs very smooth. I have no issues except sometimes the GPS fix takes longer. It does everything else. Make sure you Hard reset after flashing.
Edit: sorry guys, was not thinking as i typed. I meant 3.35 radio (the one from the sprint update). Flash the 3.35 or 3.37 radio!
I would suggest using the latest ROM as well. Seems to have made a difference with battery life to me.
mdjkim said:
I would suggest using the latest ROM as well. Seems to have made a difference with battery life to me.
Click to expand...
Click to collapse
interesting how u guys on vzq have no problems with the reva radios... I was running 3.0.4 for quite a while until I finally canned it because I couldn't deal with apps crashing when switch to other procs... I went back to 1.7 to see if there was a problem there too but everything runs good it seems... am having bluetooth problems locking up device sometimes though so now I'm back to vzw stock radio to see if that fixes things? Actually I have no idea if bluetooth would be affected by radio or not but I'm desperately trying to find a stable setup.
I have flashed several VZW xv6800s. If you have the 3.27 radio just flash DCDs latest (3.0.4). It runs very smooth. I have no issues except sometimes the GPS fix takes longer. It does everything else. Make sure you Hard reset after flashing.
Click to expand...
Click to collapse
This is VERY bad advice and will only screw your phone up even more. It says in numerous places on these boards that 3.27 radio is NOT compatible with 3.x.x roms. The only roms that will work with the 3.27 radio are the 2.x.x roms.
My question to you though is why on god's green earth are you still wanting to run a 2.x.x rom with the old crappy buggy beta radio 3.27? Just update with the alltel updater to get radio 3.37.20, don't let customizations run, then flash dcd 3.0.4...much much better and will probably fix your gps problems.
corey113888 said:
I have flashed several VZW xv6800s. If you have the 3.27 radio just flash DCDs latest (3.0.4). It runs very smooth. I have no issues except sometimes the GPS fix takes longer. It does everything else. Make sure you Hard reset after flashing.
Click to expand...
Click to collapse
Danger!
radio 3.27 is NOT compatible with dcd 3.0.4 rom!!!
1) radio 1.30 or radio 1.40 = use dcd 1.7 (non gps rom)
2) radio 3.27 radio = use ONLY dcd 2.x.x series roms (with gps , revA - experimental)
3) radio 3.37 radio = use dcd 3.0.1 or 3.0.4. (gps and revA official)
my recommendation would be option 1 or 3. Depending on whether you want gps or not.
Zenoran said:
interesting how u guys on vzq have no problems with the reva radios... I was running 3.0.4 for quite a while until I finally canned it because I couldn't deal with apps crashing when switch to other procs... I went back to 1.7 to see if there was a problem there too but everything runs good it seems... am having bluetooth problems locking up device sometimes though so now I'm back to vzw stock radio to see if that fixes things? Actually I have no idea if bluetooth would be affected by radio or not but I'm desperately trying to find a stable setup.
Click to expand...
Click to collapse
Zen,
I think you might be the victim of a dodgy titan. I was, like you, using 1.7 for the longest time because I couldnt put up with the buggy 3.27 radio. So i just stayed non gps until the new radion 3.35 came out and dcd released 3.x.x series of roms. Since then I bit the bullet and went back to gps rom. I didn't look back. So far dcd rom 3.0.4 + radio 3.37 (alltel) has been the best (i.e reliable) rom setup I have experienced since I was on dcd 1.7.0. I think they are both equal now, except that I have gps enabled now and I dont need to carry my gps with me all the time.
The internal gps does SUCK the battery down kinda fast, but it is reliable. No bluetooth issues that I can see except that call quality is still sub-par but at least it connects without any trouble. If I am using the gps function in the car i use my BT gps because the BT radio uses a lot less juice than the internal gps receiver.
I have VZW just like you and gc, az clown etc and we all have similar good experience with the new setup. So the only other thing I could say about your titan problems is that it must be hardware. Try stock again and see if it clears up the problems then I would say that my reading of your situation is wrong. But from what you have said it seems right.
maccaberry said:
Zen,
I think you might be the victim of a dodgy titan. I was, like you, using 1.7 for the longest time because I couldnt put up with the buggy 3.27 radio. So i just stayed non gps until the new radion 3.35 came out and dcd released 3.x.x series of roms. Since then I bit the bullet and went back to gps rom. I didn't look back. So far dcd rom 3.0.4 + radio 3.37 (alltel) has been the best (i.e reliable) rom setup I have experienced since I was on dcd 1.7.0. I think they are both equal now, except that I have gps enabled now and I dont need to carry my gps with me all the time.
The internal gps does SUCK the battery down kinda fast, but it is reliable. No bluetooth issues that I can see except that call quality is still sub-par but at least it connects without any trouble. If I am using the gps function in the car i use my BT gps because the BT radio uses a lot less juice than the internal gps receiver.
I have VZW just like you and gc, az clown etc and we all have similar good experience with the new setup. So the only other thing I could say about your titan problems is that it must be hardware. Try stock again and see if it clears up the problems then I would say that my reading of your situation is wrong. But from what you have said it seems right.
Click to expand...
Click to collapse
Well, that's the thing.. when I go to stock everything I have no problems but am stuck with crappy wm6.0... I don't mind not having the gps so much but it def would be nice... However, I do hate having to run an older rom that isn't community-supported any longer due to newer releases...
I think my problem with 3.0.4 might have been the way I flashed the radio.. I was one of the original ones to actually get the dcd released radio installation to work and hadn't really looked back.... im wondering if maybe that was the problem... I might consider trying the sprint rom method to get the radio and then trying 3.0.4 again...
Other than that, I don't see any way to get a warranty replacement on the device if all the stock vzw stuff works without a problem.. only support I ever have logged with vzw for this device is the many many many times I've had hung data connections from switching back and forth to reva/non reva radios so much.... I long for a stable setup so I don't have to deal with this anymore
Other than that, I don't see any way to get a warranty replacement on the device if all the stock vzw stuff works without a problem.. only support I ever have logged with vzw for this device is the many many many times I've had hung data connections from switching back and forth to reva/non reva radios so much.... I long for a stable setup so I don't have to deal with this anymore
Click to expand...
Click to collapse
Now I'm not saying I condone this, but man...there are definitely ways to get warranty replacements even if everything works fine...
Just need to "screw things up" on your own Make it so your phone won't boot, bring it to a vzw tech center...cuz they won't know what the hell is wrong with it trust me...and bam they'll swap it out.
Edited my original post...
Also, i have had 2 replacement xv6800s. One was for white spot in the bottom left part of the screen. I had to call VZW and tell them they were out of replacements at the store. The other was replaced a week later for data not working.
Zenoran said:
Well, that's the thing.. when I go to stock everything I have no problems but am stuck with crappy wm6.0... I don't mind not having the gps so much but it def would be nice... However, I do hate having to run an older rom that isn't community-supported any longer due to newer releases...
I think my problem with 3.0.4 might have been the way I flashed the radio.. I was one of the original ones to actually get the dcd released radio installation to work and hadn't really looked back.... im wondering if maybe that was the problem... I might consider trying the sprint rom method to get the radio and then trying 3.0.4 again...
Other than that, I don't see any way to get a warranty replacement on the device if all the stock vzw stuff works without a problem.. only support I ever have logged with vzw for this device is the many many many times I've had hung data connections from switching back and forth to reva/non reva radios so much.... I long for a stable setup so I don't have to deal with this anymore
Click to expand...
Click to collapse
Zen,
go the 'official' route from stock. olipro 2.40. sprint 3.35 official (without allowing customizations) then flash dcd 3.0.4. If you still then have problems then we can isolate your flash before as a potential problem.
if you still have all the same issues then i really think its time for a new titan. If all is well then you can finally relax and enjoy the device.
Good luck
maccaberry said:
Zen,
go the 'official' route from stock. olipro 2.40. sprint 3.35 official (without allowing customizations) then flash dcd 3.0.4. If you still then have problems then we can isolate your flash before as a potential problem.
if you still have all the same issues then i really think its time for a new titan. If all is well then you can finally relax and enjoy the device.
Click to expand...
Click to collapse
Ya, I actually did the Sprint Flash this time around and things seem to be working better, to my surprise... Things seem to be running a lot better now compared to the radio hack I was using before... I imagine that's the reason dcd killed that link off the forums... although it didn't brick my phone, it obviously was crippling my device quite a bit.
Only thing that worries me (somewhat) about the sprint rom was that it changed the bootup screen (pre os load).. it's now black screen with red lettering showing versions... I have NO idea how that can be reverted back if I ever need to have this thing serviced. That sprint rom appears to totally changed the device.
Zenoran said:
Ya, I actually did the Sprint Flash this time around and things seem to be working better, to my surprise... Things seem to be running a lot better now compared to the radio hack I was using before... I imagine that's the reason dcd killed that link off the forums... although it didn't brick my phone, it obviously was crippling my device quite a bit.
Only thing that worries me (somewhat) about the sprint rom was that it changed the bootup screen (pre os load).. it's now black screen with red lettering showing versions... I have NO idea how that can be reverted back if I ever need to have this thing serviced. That sprint rom appears to totally changed the device.
Click to expand...
Click to collapse
Flashing of the pre-windows boot screens (i.e. the ones that show up around the time that the red lettered rom versions appear) are not part of the rom. You can't modify them with dcd's kitchen.
There are three options that you have.
1. You can create a mini rom with the splash screens in it that you can flash to the device. I dont know how to do it and dont really care to find out, but gcincotta knows how to do it and posted instructions a few days ago in another post. He can tell you how to do it.
2. You can use the ppcgeeks kitchen to create boot screens and then flash your dcd rom over the top.
3. Flashing a stock verizon, sprint, alltel etc rom will contain the splash screens and put them back on along with the correct (stock) radio and roms. Then you can take your very clean 'stock' titan back to the store for repairs or replacement without fear.
maccaberry said:
Flashing of the pre-windows boot screens (i.e. the ones that show up around the time that the red lettered rom versions appear) are not part of the rom. You can't modify them with dcd's kitchen.
There are three options that you have.
1. You can create a mini rom with the splash screens in it that you can flash to the device. I dont know how to do it and dont really care to find out, but gcincotta knows how to do it and posted instructions a few days ago in another post. He can tell you how to do it.
2. You can use the ppcgeeks kitchen to create boot screens and then flash your dcd rom over the top.
3. Flashing a stock verizon, sprint, alltel etc rom will contain the splash screens and put them back on along with the correct (stock) radio and roms. Then you can take your very clean 'stock' titan back to the store for repairs or replacement without fear.
Click to expand...
Click to collapse
Interesting.. I've never seen that changed other than this sprint rom... the stock VZW rom images I have just do the OS and Radio separately... I guess when/if I run into a situation where I need to revert back I'll worry about it then.. Until then, the newer boot screen is def cooler
gcincotta said:
Now I'm not saying I condone this, but man...there are definitely ways to get warranty replacements even if everything works fine...
Just need to "screw things up" on your own Make it so your phone won't boot, bring it to a vzw tech center...cuz they won't know what the hell is wrong with it trust me...and bam they'll swap it out.
Click to expand...
Click to collapse
gc, this is so true. The 'techs' at the verizon stores (bless their hearts) know nothing at all about the titan. you could go in there with a fully "sprintized' titan and seriously they wouldn't notice.
I found this out the first time I tried to flash. I thought I had bricked the device and took it to the "service center" verizon store near my location to get the data back working (yeah that's all the problem was, but I was a noob and didnt know better). They didnt have the slightest idea what to do to solve the problem. They screwed around with it for a while and gave it back, basically the same. they offered to switch it out for me, but I said i will try just a bit longer (and it had a customized 'colonel - ppcgeeks' rom on it - if you have ever seen one it is completely unmistakable - looks nothing like a verizon rom).
I went outside, called *8899 and got a service support tech to fix the phone over the air. The problem had just been the data account needed to be reset at their end. Not only did the guys in the store have no idea how to fix it, they didnt even notice that my device was clearly not stock.
Zenoran said:
Interesting.. I've never seen that changed other than this sprint rom... the stock VZW rom images I have just do the OS and Radio separately... I guess when/if I run into a situation where I need to revert back I'll worry about it then.. Until then, the newer boot screen is def cooler
Click to expand...
Click to collapse
Yeah, if you do the flashes separately the boot screen never change. I still had the original verizon boot screens until just recently when I did the upgrade to dcd 3.0.4. Its the running of the sprint installer that overwrites your verizon splash, not the rom or the radio themselves.
Anyway, i used the dcd kitchen to create my 3.0.4 rom and selected HTC animation. That creates a HTC splash to overwrite the sprint stuff, and then I did this and this and my machine looks sweet when it boots.
The instructions of how to load them is explained in the thread http://forum.xda-developers.com/showthread.php?t=379822
Enjoy. (I cant post pics of the screens because the xda database is busted at the moment)
It's on HTC's website, dated July 7th. I haven't seen any other threads on it, and I wanted to see if anyone else has tried it. I've updated to it myself, and it seems to be an overall improvement over the version I had. There's really nothing much in the notes, though it seems they tweaked quite a bit. Most notably, it's done wonders for my battery life. I used to always come home with a phone that was nearly dead. Now I get home with 60-70% still left on the battery. It could be my imagination, but the phone seems a bit more responsive now as well. If the battery life is anything to go by, it could just be from general optimization of the ROM. Other points of interest... the activesync app is no longer self-launching, and Opera Mobile appears to have had an update as well.
-edit-
Here's the link: http://www.htc.com/us/supportdownloadlist.aspx?p_id=200&act=sd&cat=all
im in the process of doing it know, ill let ya know what i think in a bit
I tried it when it 1st came out, its definitely better than the shipped rom, but its still got all of the bloatware and other b.s. that interferes with performance. IMO, you're still better off with a cooked rom.
ya i honestly cant tell a different between stock rom and this update
Oh yeah, I'm sure a cooked rom is faster. Just thought I'd put the PSA out there. It does seem to address a few issues for my launch version of the ROM.
one of these day ill get around to putting a custom rom on my phone.
thiers just to many and i cant figure out which one i want
stock
if i have already unlocked my phone and running a custom rom and want to flash to this stock rom do i need to do anything different?
No, just flash as you normally do. Every couple of flashes I go back to the stock rom anyway. Probably just the "placebo" effect, but I've convinced myself it helps.
Do it for the Radio
powermatt said:
Oh yeah, I'm sure a cooked rom is faster. Just thought I'd put the PSA out there. It does seem to address a few issues for my launch version of the ROM.
Click to expand...
Click to collapse
Notation to everyone here this ROM includes an updated radio. 1.12.20F. So that it's self should be worth it. I run NFS rom but I am going to update to this so I can grab the updated radio. I will then jump to his. My radio is currently 1.03.16F. It also has the later PRL and PRI.
I see the in the Radio Thread in this forum that they have the alltel readio without the whole ROM. So if you want go that route. I have just found that doing a stock flash every once in awhile keeps my custom flashing less problematic.
im still having problems as far as radio signal.........and the only reason i don't just upgraded the radio is their is no alltel dump yet
I also get great battery life after the update.
Tritan21 said:
I also get great battery life after the update.
Click to expand...
Click to collapse
Agree and better signal quality. Used the Field Test to check the signal.
tell me more about this field test, i would like to see if my signal is better
chris347101 said:
tell me more about this field test, i would like to see if my signal is better
Click to expand...
Click to collapse
Go to this thread http://forum.xda-developers.com/showthread.php?t=531134
and look on the first post. In it it says how to check my signal. That will show you what you need. Lower is better for all 3 numbers it shows in the post to look at.
##33284#
typing this didn't do anything...all i got was call cant be completed as dialed
One very nice discovery I made today (because of how little I actually talk on my TP) is that they've changed the call answer screen a bit. Seems they took a page from Apple's book and changed the answer and ignore buttons into a slider. You slide it all the way left to answer, and right to ignore. Should fix the accidental answer problem I know a lot of people (including myself) have had.
Will this work on Verizon TP? I know i will have to apply keyboard patch but would it work?
Radio should work no problem, especially since alltel and verizon are 1 now.
I dispise Verizon ROM. No YouTube, No Internet Sharing etc... Got it as a insurance replacement when my Alltel TP broke. They said they don't have Alltel TPs anymore.
Please give me the good news... PLEEEAAASE
PS: I already have GPS unlocked using MR1 release from Verizon.
IDrinkV8 said:
Will this work on Verizon TP? I know i will have to apply keyboard patch but would it work?
Radio should work no problem, especially since alltel and verizon are 1 now.
I dispise Verizon ROM. No YouTube, No Internet Sharing etc... Got it as a insurance replacement when my Alltel TP broke. They said they don't have Alltel TPs anymore.
Please give me the good news... PLEEEAAASE
PS: I already have GPS unlocked using MR1 release from Verizon.
Click to expand...
Click to collapse
I wouldn't attempt it if I were you. Have you considered trying a custom rom? If you've never done it I could help you through the process. Stock roms SUCK!
Can i ask you if it works in a touch pro un-locked of the vodafone Italy company?
I have an alltel touch pro but my area switched to verizon now, im assuming this won't be a problem because i didn't need to do any update when they switched so im guessing the radio won't be an issue? Really want to do this if it increases battery.
Also will this remove any settings or themes that kind of stuff?
edit nevermind i see it removes everything.
if i take my memory card out before i update can will all the programs that are one it reinstall? and when i put all my backed up data back on the device do the programs reinstall or do i have to do something to reinstall them?
Hi all!
I'm picking up a hopefully gently used Touch Pro tomorrow to replace my HTC Mogul. Very excited to have some extra RAM to work with, as well as the capability to try out all of these great ROMs.
As I have no experience with the Touch Pro, I am hoping you all can tell me what Radio and SPL I will need to begin my journey, and hopefully where to find them!
If you can offer any additional advice about this phone, any tips, tweaks, or general recommendations, I'd be very appreciative.
Thanks in advance!
I forgot to add that I'm going to be on the Sprint network!
Anyone?
I found the unlocking guide above which includes info on obtaining a HardSPL version. I hope this is the best one available.
I have not been able to find any information about updating the radio of the device so it works best with Sprint.
Hopefully someone can shed more light on this for me.
xiton said:
Anyone?
I found the unlocking guide above which includes info on obtaining a HardSPL version. I hope this is the best one available.
I have not been able to find any information about updating the radio of the device so it works best with Sprint.
Hopefully someone can shed more light on this for me.
Click to expand...
Click to collapse
You should have everything you need on my guide. As far as radio, what you could do is after unlocking the device, flash a Sprint stock rom (the latest available), which will likely have the latest radio that Sprint released as well. Once you have flashed this package, simply flash another rom (whichever one you like) on top. The radio will remain the same and only your rom will change. Hope this helps.
egzthunder1 said:
You should have everything you need on my guide. As far as radio, what you could do is after unlocking the device, flash a Sprint stock rom (the latest available), which will likely have the latest radio that Sprint released as well. Once you have flashed this package, simply flash another rom (whichever one you like) on top. The radio will remain the same and only your rom will change. Hope this helps.
Click to expand...
Click to collapse
Thanks for the reply. I was able to find more for our device on another popular forum. It seems that XDA has more of a GSM focus for the Touch Pro. I appreciate your guide as it has helped me expand my knowledge of the device. I feel like I'm all set now.
I did the same thing a few months ago. There is everything you could ever need to unlock and flash to what ever rom you want. After flashing just about every rom here, my problem is that I want to combine about 3 different roms to make the one I want, The only problem is I have no idea how to use a kitchen or build a rom hahahaha.
Tony
YO MAN!!!
Glad you were able to find everything you needed. Holler if you need anything else, we here and over at PPCG are always ready to help someone else... Just remember, there will always be nOObs out there and it never hurts to share the knowledge you have received.
Take care man.
EDIT 1: To the post above mine, try PPCKITCHEN.org... if you are not sure how to cook a rom, this kitchen is made for people with little to no experience... Experiment with it, build your own rom with your own options. Just make sure you do the update first...(it takes forever for the update to complete.) There are also other kitchens out there, but this is the one I first started out with. (Sorry for advertising other sites...)
mapaz04 said:
Glad you were able to find everything you needed. Holler if you need anything else, we here and over at PPCG are always ready to help someone else... Just remember, there will always be nOObs out there and it never hurts to share the knowledge you have received.
Take care man.
EDIT 1: To the post above mine, try PPCKITCHEN.org... if you are not sure how to cook a rom, this kitchen is made for people with little to no experience... Experiment with it, build your own rom with your own options. Just make sure you do the update first...(it takes forever for the update to complete.) There are also other kitchens out there, but this is the one I first started out with. (Sorry for advertising other sites...)
Click to expand...
Click to collapse
There are a LOT of issues with the rom kitchen for the Herman in PPCK. A lot of reports of roms simply getting stuck at the initial boot-screen. You can try Ervius or one of the newer Visual Kitchens. Good luck!
xiton said:
Thanks for the reply. I was able to find more for our device on another popular forum. It seems that XDA has more of a GSM focus for the Touch Pro. I appreciate your guide as it has helped me expand my knowledge of the device. I feel like I'm all set now.
Click to expand...
Click to collapse
the pro is a good phone as long as you have a good rom.
i am currently using the new xxxRootRom which can be found on the ppcgeeks.com forums. i have tested about 6 - 8 different roms so far and found this one to be very stable and snappy.
maybe try a few so you can compare.
only thing i would recommend is to change the pagepool on the xxxrootrom because for some reason it was set to 6. change the value to 0 and you will be very happy with it.
hope that help.
New to Touch Pro (former Mogul User) - Many Issues - Verizon
I just got a new Touch Pro from Asurion as an insurance replacement to XV6800. I am not new to these forums and have, over the years, applied many hacks and flashed many ROMS to my Mogul.
I'm currently using the stock ROM from Vzn (full device details in my sig) but I'm experiencing too many issues to address in a single post perhaps, and I researched and tried many solutions for hours. My biggest issue is Bluetooth related.
I am using the Bluespoon Spider stereo headset which worked great on Mogul. On TP I cannot get any settings to not cause skips and lags on locally stored music playback. I use both Adv Config 3.3 and Total Commander to adjust bitpool Min/Max bitpool. sample rate, & audio gateway settings. The best I've gotten is clear, mostly uninterupted music with the TP sitting in my lap, BUT if I turn my head to the right (the AVRP controls are in the right earpiece) I get serious skips & lags. I used to go about 100 ft clearsight from my Mogul before experiencing drops! Now with TP a matter of inches and my own head blocks the signal?
Anyone else experince this issue? What are you best results with BT seeings? I remember dumping M$ Bluetooth Stack for Widcomm's on Mogul and that made all the difference - can I / should swap out stacks on the TP? My headset won't even properly coonect, I must continually choose "set as wireless stereo" each time I turn on BT.
As for players, Ive used WMP, HTC player and S2P all with the same poor results. I hate that with TouchFlo 3D off, WMP insists on opening and assuming control of AVRP (play/pause/next) features. I tried one hack to break that and it nearly bricked my phone and it caused my SD card to become unreadable AND unformattable. I'll address that in the proper forum
I was so psyched about getting the Touch Pro, but I think I'm gonna have to cook the pants of the stock ROM. Any help with my bluetooth issue woud be greatly appreciated.