I tried to install wm6.1 on my SDA2, but an error occured.
When i try to start my phone now, i only get a white display and i can't even load the boot manager by holding the camera button an connecting the USB cable...a connection with active sync isn't possible and so i can't flash it back.
is there a possibility to rescue my SDA2 or is it unpossible to bring it back to life?
thx for your answers
I'm also interested in a solution.
Is it possible to restore the bootloader ?
My phone (SDA II) doesn't do anything after the update crash.
Related
Hi
i had an imate jamin and i tried to upgrade it to wm6 today. but after i performed a hard reset my device has stucked in the imate blue screen and didnt boot!!!!
i managed to enter the three color bootloader screen by pressing the camera button while restarting the device, then i ran the RUU_Prophet_220734_2207114_024721_NVID but it constantly gives me the error 260 (cannot connect to device).
i am using vista
what can i do now???
please help meeeeeee!!!!!!!!!!!
can you please stop using words like pleaseeeeeeeeee,help meeeeeeeeeeee?
can you please start reading the wiki first?
can you please read the wm6 upgrade guide second ?
if you have done all of the above,did you understand not to upgrade your device under windows vista,and try to do it under windows xp,because wmdc is causing troubles with rom update utility?
thanks for attention.
Heyyyy
I used xp now but still the same problem
can anybody help me???????????
do you have activesync installed on your windows xp?
yes
i have installed activesync 4.5
but
it cant recognise my phone because my phone just cant boot
even when i try the 3 color bootloader screen (soft reset + camera key)!!!!!!!
any advise on how to fix my imate jamin??
To the user with all the Eeeeeeeeeeeeeeeeeeeeeee's...
Try to look into Wiki, like other members have suggested.
Then you might try to use the search functions in this forum.
And maybe after you have tried these options, you could look into similar cases - like for instance this one: http://forum.xda-developers.com/showthread.php?t=337003
for instance...
Hi All,
Yes I searched, could not find a helpful post that I could understand (unfortunately a lot of not-so-good english on these forums!).
I used the file 'windowsmobile2003se.exe' here;
http://forum.xda-developers.com/showthread.php?t=230279
It started loading fine, then when it came up with the progress bar to start updating, my device rebooted and is now stuck in bootloader.
When I try himaupgradeut.exe, it gives me a ERROR 101: Connection Error. USB is disabled in ActiveSync and I can see the device as "Microsoft USB Sync".
The USB still works (I can use mtty and xda2unlock in Windows XP and they both work fine). Is the device still recoverable?
I have hard reset (Power + Reset), removed and re-inserted battery and tried a normal reset, none of these work.
Can I please have some step-by-step instructions on how to recover the phone? The bootloader version is 1.06
Thanks.
can you get some pics?
Have you tryed leaving the battery out for 1 day or over night. Because that fixed some problems for me.
try it
flyboy
Yeah I've left the battery out overnight (about 12 hours to make sure the backup battery ran flat). It's still stuck on the boatloader.
It's just got the normal bootloader screen (Serial up top and 1.06 down the bottom) and this changes to USB when in the cradle, so the device seems to be fine.
Any ideas?
Solution found!
I HAVE FOUND A SOLUTION FOR RECOVERING FROM BOOTLOADER!
Full props and thanks go to utak3r of buzzdev.net
Please go to this thread.
http://buzzdev.net/viewtopic.php?f=8&t=36437&start=0
MODS: Please sticky this. Please.
Hi All,
I have made a script that people can use to easily flash their Himalaya without performing all the above steps manually.
My extreme and eternal thanks go to utak3r (from BuzzDev), xda-developers.com and buzzdev.net for building such great communities and for providing so much help and information (even if it is a little hard to follow sometimes!).
You can download it from;
http://members.iinet.net.au/~nomicakes/MakeSDBoot.zip
http://www.clonnyserver.com/uploads/tools/himalaya/MakeSDBoot.zip
The zip file contains the script and the tools neccesary to do this.
As above, if you aren't familar with flashing devices and the possible outcomes, DO NOT USE THIS TOOL.
Hi there,
Yesterday I tried to upgrade my Qtek 2020 to the last rom available but something went wrong and now my PPC only shows the bootloader screen.
After hours of researching on Google I found this forum and this topic. I tried to do what is in utak3r tutorial but I can't connect to my PPC using mtty (usb port can't open) and I don't know why. :\
When I try himaupgradeut.exe, it gives me a ERROR 101: Connection Error too...
And finally when I run this script made by Clontarf it fails on the last step on writing to the SD card. It gives me a Error - Access Denied.
I don't know how to solve this. Would you please help me?
Problem solved!
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Perarg said:
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Click to expand...
Click to collapse
I have the same problem patrida !!! Have you found out a sollution yet ?
Use SP_Flash_Tool_v3.1344.0.212
And select Firmware -> upgrade
Hi! I really head your help!! I looked a lot around and followed lots of guides on how to revive my phone, but i've some big issue with it and i really hope that someone here may help me...
The Hard Brick (it won't turn on, it won't charge, it seems like he's totally dead) occurred the other day, i was trying to open googlemaps and the SP was really slow, so i turned it off, and then i wasn't able to turn it on again, at first it was stucked at the screen with the logo (before the splash animation, the logo that you can't normally change) then i managed to turn it on after 2 or 3 times taking off the SD card, but i got a corrupted homescreen, i turned it off again and then, after 2 or 3 times, i got the Hard Brick!!
Probably in my last attempts i created a bounch of errors in the rom that bricked my phone.
Here's what i've done to revive it:
- SPFlashTool 1332.0.187
- official drivers, recovery, rom, etc, from the jiayu.es website.
- removed the battery, manually installed the drivers.
- with spft i loaded the scatter file of the official rom and started the format:
the phone is recognised as Mediatek USB VCOM (Android) (COM3)
i always got the error: S_COM_PORT_OPEN_FAIL (1013)/B] (with every option available)
I tryied to download only the preloader.bin and the recovery.img but i recive the same error.
- someone give me an advice: to remove every old driver for the phone and leave the SPFlashTool to recognise the phone forcing the installation of the drivers. And i really don't get how to do it, the windows update automatically detect the device, if i stop the windows update i simply get an unknown device, the SPFT don't have a chance to recognise it and force the installation of the drivers.
Does anyone of you have a solution, a similar problem, a way to revive my cellphone?
I really can't effort another one XD
FenriX` said:
Hi! I really head your help!! I looked a lot around and followed lots of guides on how to revive my phone, but i've some big issue with it and i really hope that someone here may help me...
The Hard Brick (it won't turn on, it won't charge, it seems like he's totally dead) occurred the other day, i was trying to open googlemaps and the SP was really slow, so i turned it off, and then i wasn't able to turn it on again, at first it was stucked at the screen with the logo (before the splash animation, the logo that you can't normally change) then i managed to turn it on after 2 or 3 times taking off the SD card, but i got a corrupted homescreen, i turned it off again and then, after 2 or 3 times, i got the Hard Brick!!
Probably in my last attempts i created a bounch of errors in the rom that bricked my phone.
Here's what i've done to revive it:
- SPFlashTool 1332.0.187
- official drivers, recovery, rom, etc, from the jiayu.es website.
- removed the battery, manually installed the drivers.
- with spft i loaded the scatter file of the official rom and started the format:
the phone is recognised as Mediatek USB VCOM (Android) (COM3)
i always got the error: S_COM_PORT_OPEN_FAIL (1013)/B] (with every option available)
I tryied to download only the preloader.bin and the recovery.img but i recive the same error.
- someone give me an advice: to remove every old driver for the phone and leave the SPFlashTool to recognise the phone forcing the installation of the drivers. And i really don't get how to do it, the windows update automatically detect the device, if i stop the windows update i simply get an unknown device, the SPFT don't have a chance to recognise it and force the installation of the drivers.
Does anyone of you have a solution, a similar problem, a way to revive my cellphone?
I really can't effort another one XD
Click to expand...
Click to collapse
There is a guide right here
I already tryied to revive my phone with this guide, but with no success...
I was thinking that maybe someone can show me the right driver (with all the package of driver that i find i always have no idea which one i've to install)
And maybe someone already tryied to revive a jiayu g4a and know the name of the right preloader, 'cause apparently what i need to do is to download into the SP the right preloader to revive it...
Hi,
Wondering if anyone can help me get round a problem i have with my Elephone P9000...
I recently dropped the phone and as a result, i can't access the phone although i can see the screen. I want to enter recovery mode to do a hard reset in case i don't use the phone again but the current ROM doesn't have that option (the ever returning elephone symbol on reboot!) Also, when i connect the phone to the PC, it shows in Windows but has no file system - i assume that this is because it is in the wrong mode to allow transfer (something i can't switch as the touch functionality is broken).
Is there a way to get either another version of the ROM onto the phone via a microSD card or use this to access recovery mode? Any help is much appreciated as i'm a bit stuck at the moment!
bod1611 said:
Hi,
Wondering if anyone can help me get round a problem i have with my Elephone P9000...
I recently dropped the phone and as a result, i can't access the phone although i can see the screen. I want to enter recovery mode to do a hard reset in case i don't use the phone again but the current ROM doesn't have that option (the ever returning elephone symbol on reboot!) Also, when i connect the phone to the PC, it shows in Windows but has no file system - i assume that this is because it is in the wrong mode to allow transfer (something i can't switch as the touch functionality is broken).
Is there a way to get either another version of the ROM onto the phone via a microSD card or use this to access recovery mode? Any help is much appreciated as i'm a bit stuck at the moment!
Click to expand...
Click to collapse
flash a rom with sp flash tools in upgrade mode, it will wipe userdata
Ruben Craveiro said:
flash a rom with sp flash tools in upgrade mode, it will wipe userdata
Click to expand...
Click to collapse
Thanks for the starting point - it was very helpful to get me onto the right track.
I've now installed the flash tool and downloaded the relevant drivers, the one thing that's stopping me doing this is that the drivers being installed are coming up with a code 10 'This device cannot start'. I've followed the exact process for Windows 10 (disabling signing, adding the device manually with drivers, removing the device but keeping the drivers then finally plugging in the P9000 whilst switched off) but when i do connect the P9000 via USB, it's not recognised, presumably because of the driver issue. The only tips i can find are to ensure the drivers are up-to-date which they are so there must be something else going on behind the scenes.
Has anyone else had this issue and managed to resolve the driver issue?
Any help would be greatly appreciated.
bod1611 said:
Thanks for the starting point - it was very helpful to get me onto the right track.
I've now managed to flash the latest TWRP as recovery onto my P9000 - the one issue is that it's asking for confirmation on the front screen and without touch functionality, i can't get to the menu to carry out a hard reset! Can anyone recommend an older version where this message does not appear or another recovery tool i could use?
Click to expand...
Click to collapse
bod1611 said:
bod1611 said:
Thanks for the starting point - it was very helpful to get me onto the right track.
I've now managed to flash the latest TWRP as recovery onto my P9000 - the one issue is that it's asking for confirmation on the front screen and without touch functionality, i can't get to the menu to carry out a hard reset! Can anyone recommend an older version where this message does not appear or another recovery tool i could use?
Click to expand...
Click to collapse
use the stock recovery? (flash it on sp flash tools, or use CM recovery, both use hardware keys) // nevermind, i fotgot you didbt had access to it..
Click to expand...
Click to collapse