Related
Hello,
I received my Qtek 8500 recently and it has many T9 Languages, but no Portuguese. Can anyone help me install Portuguese T9 on it? Many thanks,
Alan
If you don't already tried, you can see http://forum.xda-developers.com/viewtopic.php?t=56710
It's for tornado/faraday smartphones but maybe it's working also on the star trek.
Thanks. Unfortunately, I saw that yesterday and tried it but it did not work. Maybe we need the file extracted from the ROM of the Star Trek...
What about flashing the i-mate Smartflip WWE ROM on it ?
I have it and it has Portuguese T9...
Just my 2 cents.
Ciao
At the moment it is not possible to flash the iMate ROM to the Qtek because it is CID locked. But maybe you could give me the Portuguese files and I could try to install manually without changing the ROM. It is simple. Please add me to your MSN and we can work this out hopefully. My MSN is [email protected]. Looking forward to it. Thanks!
Alan
Help Needed
OK, I received the files from Mix (many thanks, man!), and tried to add the T9 Portuguese, but it is not working. I have it as available now, but when I input anything, nothing happens. The procedure I followed was the one posted by Ronswens. Maybe for the Qtek 8500 there is a different procedure. If anyone can help, please do. It will be much appreciated. Thanks,
Alan
Re: Help Needed
alanbr said:
OK, I received the files from Mix (many thanks, man!), and tried to add the T9 Portuguese, but it is not working. I have it as available now, but when I input anything, nothing happens. The procedure I followed was the one posted by Ronswens. Maybe for the Qtek 8500 there is a different procedure. If anyone can help, please do. It will be much appreciated. Thanks,
Alan
Click to expand...
Click to collapse
Just a question: did you unlock your device, or is it still locked ?
I don't mean SIM locked, but application locked !!!
Please, have a look if you can move links within "\Windows\Start Menu" and its subdirectories...
Otherwise it would be anyway difficult...
And/or maybe there are some other references within the registry that could prevent you succeed...
Just my 2 cents...
Ciao (and good luck...).
Hi Mix,
Yes, I do have the phone application unlocked. I used HTC Registry Editor to change the value of those 2 keys and then I ran the SDA Application Unlock executable. So I believe it is fully application unlocked. Just for the sake of it, I tested moving the shortcuts from the Windows\Start menu as you suggested and I had no problems in doing it... So I believe we have to find out what else is necessary... But thanks again for your support! And congrats on the Fifa World Cup!
Alan
Michele,
I think I am closer now to the problem. I tested with Spanish and it worked. However, it does not work with Portuguese no matter what I do. But now we know that I am not making any silly mistakes on my side, and that the problem has nothing to do with my phone being locked, etc. All the languages that you sent to me seem to work, except Portuguese... It seems to me that the Portuguese files are somehow corrupted. Since you do have Portuguese T9 on your device, may I ask you to please try to use it and see if it is working? Let me know the results. Many thanks for your help!
Alan
alanbr , hi !!!
You are from Portugal right ?
Where did you buy your Qtek 8500 ? have you managed to fix the problem with T9 PT ?
And do you know if your QTEK 8500 allows firmware updates from QTEK ?
Thanks...
By the way can you leave me a PRIV MSG with your MSN ?
Thanks again.
alanbr said:
Michele,
... Since you do have Portuguese T9 on your device, may I ask you to please try to use it and see if it is working? Let me know the results. Many thanks for your help!
Click to expand...
Click to collapse
Sorry for the delay, but YES, they do work on my Smartflip...
I did not know any word of Portuguese, but I tried to write "Quero" and "Buscar" and it perfectly reported those two words among some others which I did not recognise...
I suppose then it works... ;-)
Sorry giving you such bad news... but you asked for it...
Ciao
Help alanbr
Hi!,
Could you send me the spanish files and the process to install it (hotmail: [email protected])?.
I have the same problem.
Regards
Sorry for bumping an old thread up, but did anyone managed to properlly install the T9 files in Portuguese (Portugal) for the Qtek 8500?
Edit:
I fell stupid! When I was writing an SMS I pressed the * button and a T9 menu appeared where I could select the portuguese T9. There's no mention to this on the user manual (as many other features). You can even configure other T9 settings there and even add your own words manually.
T9 .cab files needed
Does anyone could provide me the T9 .cab file for this ? Could I use this file in my O2 Xda Stealth since I can not write SMS or anything from the keyboard (Physical pad) and I would like to do this.
Thanks
Hi, is it possible to add Norwegian xT9 on Touch Dual?
I want to use a cooked ROM, but there is no Norwegian language, so i'm kind of stuck with the original ROM.
I saw a guy put this together : http://www.modaco.com/content/HTC-Ju...Pack-14-in-1-/
But it didn't work on my phone, maybe because it is a "qwerty" phone it's made for.
Does someone know how to fix it, or know about a language pack for a "abc" keypad, please help, I want a cooked ROM so badly!
you can use Phonepad internation as an onscreen keyboard, it contains Norweigan (Bokmål tror jeg)
/Cagra
Ok, but i want to use the hardware keybord, not the screen
Have you got any solution on this, HolyOle? I have the same issue.
No, not yet.. But i have a temporarily solution.
I got Tom codons rom, and have installed the (abc standard input thing)
And with German letters i get the å is a a with to dots over it..
And ø is a o with dots over so people understand what i write..but i really want xT9
Have you already taken a look in this topic?
There are some cabs in there which you might want to give a try
Hi
I have good news for all who uses Erofich's wonderful Windows Mobile 6.1 Pro ROM on HTC StrTrk aka Qtek8500 aka Cingular 3125 aka ... that want a XT9 Language Pack.
Here is the "StefanV3 StrTrk WM61PRO XT9 Language Pack" featuring 10 languages (8 new):
Code:
1. Danish
2. German
3. English
4. Spanish
5. Finnish
6. French
7. Italian
8. Norwegian
9. Russian
10. Swedish
I could only test the languages english and german because these are the only languages i speak. If the other languages are wrong then sorry, but i am not able to fix it. It is a mix from files of "Modaco Shadow XT9 Language Pack" and ripped files rom the official "PegasusP_20080125_V4_8_1_WWE_SG00" ROM Update for ASUS P750. I used the ldb files (XT9 word libary) and registry entries from "Shadow XT9 language pack" and ripped out all kdb files (hardware keypad layout) from the ASUS P750 ROM.
It is available as CAB so you can install it Easy.
This is only for HTC StrTrk aka Qtek 8500 aka Cingular 3125 flashed with Erofichs WM 6.1 Professional ROM. I can't guarantee that it works with other smartphones/pocket pc. If you use it onother devices it could damage your Windows Mobile so you have to reflash the device in bootloader mode.
Thanks to Erofich for his great Windows Mobile 6.1 ROM for HTC StrTrk and providing me with informations about the keypad files which he used in his WM6.1 ROM.
Download StefanV3_StrTrk_WM61PRO_XT9_Language_Pack.CAB.html
StefanV3
great work!
Great idea!
Thank you very much!!!
Good work!
Is possible to include greek language?
Hi
dancer_69 said:
Good work!
Is possible to include greek language?
Click to expand...
Click to collapse
For this i need the right kdb file but the Original ASUS P750 ROm where i ripped the kdb files does not include greek. When i found it, i will add it...
StefanV3
Works great, thank you!
Have Turkish lenguage?
Hi
I'm sorry, but there is no turkich xt9 available this time. It's the same problem with greek language. Finding a language specific word database files (*.ldb) isn't the problem but at this time it lacks due the right language specific keyboard definiton file (*.kdb)
But i open my eyes and when i find the right finles, i will include it...
StefanV3
Finally I found the greek files and I attached here.
I put them in windows directory, add the registry values and it works, but the keymapping it's wrong.
Is there any way to correct this?
Anyway of adding dutch language?
Thanks in advance!
Karin
Hi
dancer_69 said:
Finally I found the greek files and I attached here.
I put them in windows directory, add the registry values and it works, but the keymapping it's wrong.
Is there any way to correct this?
Click to expand...
Click to collapse
These files are for HTC Niki aka Touch Dual. It has a qwertz/qwerty keypad. Key "1" is "q" and "w", 2. is "e","r" and "t" ... The ldb file will work but we need an other kdb file. If there is anyyone who can give me a Greek ASUS P750 ROM (with greek xt9) i will extract it and put it in the language pack.
This is the same with dutch xt9...
But you can try a T9-Pack that is available at asusmobile.ru -> http://asusmobile.ru/files/Soft/T9_by_ASUSMobile.RU.zip . You have to install t9.cab first and then t9_activate.cab and additional t9 languges available at http://melgurth.ovh.org/index.php?page=downloads .
But i can't guarantee you if this works.
StefanV3
Thanks for your awnser. I'll wait until we found a usable kdb file for xt9.
The t9 solution seems to don't work with greek, or I missed something. I install the cabs with the order that you said but the resault is the keypad to write only numbers and the # key doesn't pops up the menu.
Tx for your reply!
Perhaps the keypad file isn't that important for Dutch, cuz the layout is almost? the same as for US English.
Gonna give it a try tonight.
Hi
Nirak said:
Tx for your reply!
Perhaps the keypad file isn't that important for Dutch, cuz the layout is almost? the same as for US English.
Gonna give it a try tonight.
Click to expand...
Click to collapse
Please tell me if it works. I tried this with german ldb and english kdb before i got hands on the P750 ROM. It doesnt work it only writes numbers...
If it works, tell me what you hav done and i include it in my package...
Greetings
StefanV3
Stefan,
StefanV3 said:
Hi
This is the same with dutch xt9...
But you can try a T9-Pack that is available at asusmobile.ru -> http://asusmobile.ru/files/Soft/T9_by_ASUSMobile.RU.zip . You have to install t9.cab first and then t9_activate.cab and additional t9 languges available at http://melgurth.ovh.org/index.php?page=downloads .
But i can't guarantee you if this works.
StefanV3
Click to expand...
Click to collapse
This works for normal T9 with Dutch, not the fancy XT9, but anything better then nothing for me.
BTW i'm running WM 6.1 clean rom from GnatGoSplat
Any news about greek for p750?
Hi StefanV3,
StefanV3 said:
This is only for HTC StrTrk aka Qtek 8500 aka Cingular 3125 flashed with Erofichs WM 6.1 Professional ROM. I can't guarantee that it works with other smartphones/pocket pc. If you use it onother devices it could damage your Windows Mobile so you have to reflash the device in bootloader mode.
Click to expand...
Click to collapse
Works fine with a singapur flashed P750 in Germany Thanks a lot.
Bye
Deckard99
how about adding chinese language?
I also need to get Chinese language support.
dancer_69 said:
Finally I found the greek files and I attached here.
I put them in windows directory, add the registry values and it works, but the keymapping it's wrong.
Is there any way to correct this?
Click to expand...
Click to collapse
How can I add the registry, what do I have to do??? PLZZZZZ S.O.S
Hi, I have an Orange UK HTC Touch Dual with 16 keypad.
I want to flash with the NetrunnerAT Portuguese Rom:
RUU_Nike_HTC_PTG_1.31.410.09_Radio_Nike_1.58.16.27_signed_Ship
There's any problem because almost all nikes are 20 keypad?
Please help me before I begin flashing rom and installing hard spl...
anyone can help me please? I dont know if there's any difference because the keypad...
The only thing I know is that normally it doesn't matter which version keypad you have.
But there is an issue with this portuguese rom that XT9 for Portuguese isn't working with the hardware keypad. There is a work around but that one is only working for the 20 keys version.
wmn79 said:
The only thing I know is that normally it doesn't matter which version keypad you have.
But there is an issue with this portuguese rom that XT9 for Portuguese isn't working with the hardware keypad. There is a work around but that one is only working for the 20 keys version.
Click to expand...
Click to collapse
So, there's not a Portuguese Rom that XT9 Portuguese is working?
I instaled the PTG Tom_Codon's rom in my 16 keys niki and the XT9 isnt working.
It only writes numbers, no letters at all.
Im still trying to find the PTG XT9 for the niki, if anyone have found it, just let me know.
Im having the same problem with my Neon. I installed Seths Diamond v2 and i cant text. Every key goes straight to number. No xt9. I'm using a English ROM tho. Maybe some extra files we need downloading?
Before i have same problem with chinese rom, can't input text...
Problem was solved by extracting xt9 dll's and reg's from another rom.
Tim4 said:
Before i have same problem with chinese rom, can't input text...
Problem was solved by extracting xt9 dll's and reg's from another rom.
Click to expand...
Click to collapse
You wouldnt mind explaining to me would you?! This is a thorn in my side lol
1) I have downloaded cab file for Niki (20key version), thats included all required files for xt9. I found it on this site
2) I have extract all files from cab by SkTools, except key mapping files (Because it's 20key version cab, not 16). And have do the same operation for registry.
3) Next step is just move it to \windows folder and accept .reg files
4) After i have installed xt9 pack with russian language (because i'm russian)
and after SR xt9 start working
P.S. Now i use WWE rom without this problem for a long time, so i can't clearly remember what i have to do
Hey friends and developers of XDA,
I flashed any english Roms with Hard-SPL and it works great. But I have in any Roms every time the same Problem with the "germany Keyboard Layout". After flashing I change the individuell parameter in the Rom for example
1.) in Seetings/System/RegionalSettings to germany
2.) in Advance Config Tool 3.3.0.0; Input / Keyboard Layout: Germany
in the virtual Keyboard Layout are all Keys in german (ö, ä, ...) but on the Hardwaykeyboard the Keys are in english layout. The Z are on Y, etc.
What is missing in the Rom´s to get a germany hardwarelayout?
THX for help
Thomas
I changed it in the registry.
HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409(English) to 407(German)
fak3z said:
I changed it in the registry.
HKLM/HARDWARE/DEVICEMAP/KEYBD/CurLang from 409(English) to 407(German)
Click to expand...
Click to collapse
Hey fak3z,
THX for your fast answer, thats the solution !
Thomas
Hello guys,
this afternoon i flashed WinMo 6.5 from Da_G and noticed that under given registry path 1033 instead of 409 stood.
So I searched a bit the internet and immediately found the right page.
http://www.science.co.il/language/Locale-Codes.asp?s=hexadecimal
In Windows Mobile 6.1 the language ID is saved as a Hexadecimal
But in Windows Mobile 6.5 as Decimal!
So.. back to the post.
German Users should replace 1033 with 1031 (@ 6.5)!
Viele Grüße
In which Folder can i forund the .rgu or .provxml to change it in the cooking folder?
Hi folks,
i also tried to change the hardware keyboard to german, but without any success. I don't know why. I changed the Settings and the parameters in Adv. Config Tool. I am using the EnergyROM Series 2.0 21042!!!
I also changed the value for CurLang from 409 to 407.
Please help me!!!
Thx
skulltor said:
Hi folks,
i also tried to change the hardware keyboard to german, but without any success. I don't know why. I changed the Settings and the parameters in Adv. Config Tool. I am using the EnergyROM Series 2.0 21042!!!
I also changed the value for CurLang from 409 to 407.
Please help me!!!
Thx
Click to expand...
Click to collapse
did you soft reset
Shazad.K said:
did you soft reset
Click to expand...
Click to collapse
Thank you Shazad.K!!! That was the hint i needed
Far out but maybee close to my awnser
Hi guyes i don't have a Rapahel (don't even know the model) but i do have a Samsung i780 and have trying to find a solution to the Q u awnsered here, so my Q to u is.
Does this work with any WM device?
and will it work from english to Swedish (with another code)