Any suggestions? Seen a few on eBay but not sure of the quality...
Yep. Checkout www.brodit.se . Really good quality and no low budget ebay solutions. They have complete car mounts with charger. I've have had one for my Pda and for my other nokia mobile phone and now I've ordered for my Htc Touch HD.
KaLnAk said:
Yep. Checkout www.brodit.se . Really good quality and no low budget ebay solutions. They have complete car mounts with charger. I've have had one for my Pda and for my other nokia mobile phone and now I've ordered for my Htc Touch HD.
Click to expand...
Click to collapse
Second that. I have the Pro mount which fits in my car with no screw holes etc and then use their active mounts to screw into the pro mount. Charges phone perfectly and holds it great. Have used them for years now on all my phones, perfect!
ez2remember said:
Any suggestions? Seen a few on eBay but not sure of the quality...
Click to expand...
Click to collapse
i brought this one via ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230328542588
great quality, cannot fault brodit! dont forget you will need a clip
I'll add my question to this thread.
What would you guys recommend for me, considering that I often drive different types of rental cars? I checked the brodit website, but their products are made for specific car models, so it doesn't help my situation.
I have been looking at this one on ebay. Does anyone have any experience with this one? Does it stick well and is it stable? Will it only hold on glass?
I just have this fear that my HD will fall of it I hit a bump on the road.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And what about the type that clips on the air vents? How stable is that?
Here is a link to one on ebay. It also rotates 360° for portrait or landscape viewing.
UPDATE:
I bought the holder in the first picture above. You can read my review on it in Post #8 below.
I have a brodit mount. I think they are about the best ones made. They are expensive but I think that are worth it.
Many thanks all. :
REVIEW of car holder from post above
I just wanted to add my review to the first picture I posted above (holder with suction cup). But first - really quickly - as far as the second picture (holder for air vents), most of the reviews I found did not recommend it because it does not fit well on all vents, it is not stable, and it is often hard to remove from the vents.
So, now on to the suction holder from the first picture:
I got the HD holder for the car today and tested it out. I definitely like it. The suction cup sticks really well to the glass (assuming both surfaces are clean, of course). At first, I was scared that the whole thing would loosen up and fall off, and so I kept checking it constantly, but it held totally firm for the 45 minutes I was driving. Even when I went to take it off and I released the suction-lock lever, the remaining suction was still really strong.
The tray that holds the actual phone fits the HD well, and all buttons and ports are clearly accessible. I wish the phone would fit just a little tighter in the tray, but it is still fine. I never worried that it would "fall out" or anything like that. I suppose it's also good that it is not so tight that it could scratch the HD when sliding it in and out. The tray can also be easily removed and re-attached to the arm. Oh - and of course, the HD will NOT fit if you have any protective case around it (such as the silicone or hard plastic covers).
The "arm" part is easily bent and adjusted at the two joints, so you can set the HD at whatever angle you want in any direction. Once set to whatever angle, it will not loosen or bend on its own.
All-in-all, I'm very pleased with this so far and I would definitely recommend it. The user reviews I read for it on Amazon do so likewise.
I hope this helps.
Cheers!
Just throwing it out there. I recently sold my touch HD. I still have brodit car mount. If anyone wants it I'll be happy to sell it for cheap. If your local, i'll take some red bulls PM me!
BTW I love the mount. If I get any other carmount, its going to be a brodit
Related
Interested in:
http://cgi.ebay.com/Friction-Dash-D...wItemQQptZPDA_Accessories?hash=item35a19a3be5
Anyone tried it that can provide some opinions? Need to know how well it works before I shell out $10.
That stand looks beefy! Does it just sit there? I kinda like this mount http://cgi.ebay.com/New-Car-Holder-...ccessories?hash=item439859b9c3#ht_3529wt_1216 made just for the HTC Dream.
eleazar6 said:
That stand looks beefy! Does it just sit there? I kinda like this mount http://cgi.ebay.com/New-Car-Holder-...ccessories?hash=item439859b9c3#ht_3529wt_1216 made just for the HTC Dream.
Click to expand...
Click to collapse
I prefer dash mount, not windshield mount.
cigar3tte said:
Interested in:
http://cgi.ebay.com/Friction-Dash-D...wItemQQptZPDA_Accessories?hash=item35a19a3be5
Anyone tried it that can provide some opinions? Need to know how well it works before I shell out $10.
Click to expand...
Click to collapse
HOLY DASH MOUNT!! You are going to have to use street view instead of the windshield to see where you are. LOL I'm sure there will be better options soon
Hi,
I'm using one similar to that but mine's a vent mount and its pretty awesome i think. The reason I got one of these friction beasts is so that i can use it with my gps and phone. Yours seems to be better than the vent mount because it swivels. Mine doesn't swivel. But overall it works and its a very good multi tasker. I usually have it on landscape and don't use the little prongs. The foam pads are good enough to hold both my phone and gps.
I bought a cheap one from Frys for $15, it has a very similar clamping design but uses a flexible gooseneck and a suction mount. It works well, the friction mount part holds the phone well. I am not a huge fan of the gooseneck though. I cant wait to get back home and start modding on it, I think I can make it much better!
G1 Windshield Mount
I purchased a windshield car mount from pocket solutions. Works great and built well.
http://www.thepocketsolution.com/PSI-54467/T-Mobile+G1+Car+Mount.html
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Try this one. Hella cheaper as well. Yours with shipping for me woulda cost around 30. This costs me 7. Much more "fitted" for our phone too.
Suminderji said:
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Try this one. Hella cheaper as well. Yours with shipping for me woulda cost around 30. This costs me 7. Much more "fitted" for our phone too.
Click to expand...
Click to collapse
You referring to OP or one of the previous posts? I do not want a windowshield mount, I want a dashboard mount.
Suminderji said:
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Try this one. Hella cheaper as well. Yours with shipping for me woulda cost around 30. This costs me 7. Much more "fitted" for our phone too.
Click to expand...
Click to collapse
This type of mount actually blocks the charge port so you can't charge it while in the car. Kinda a deal killer because GPS uses so much power. Phone will be dead when I get to my destination.
I ordered one of those that said it had 3 clips instead of the 4 but they sent me one with 4. Then the ebay seller, lovelypriceelement, emailed me back saying that the 3 clips one doesn't exist EVEN THOUGH IT SAYS ON THE PAGE THAT THE USB PORT ISN'T BLOCKED!
Don't buy this if you want to charge in the car.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170403618927&ssPageName=STRK:MEWNX:IT
I wish I remember where i got mine. It took me 3 different ones before i found one i liked, bought them retail....just kept returning them until the 4th was the best (around $25). It has 2 clips that clip onto the vent, and a support arm between the clips that rests again the vent, doesnt move at all and the charge port is completely accessible.
jaboswell said:
I wish I remember where i got mine. It took me 3 different ones before i found one i liked, bought them retail....just kept returning them until the 4th was the best (around $25). It has 2 clips that clip onto the vent, and a support arm between the clips that rests again the vent, doesnt move at all and the charge port is completely accessible.
Click to expand...
Click to collapse
If you could find out where you got that one, that would be great. Looking for a more elegant solution to mount my G1 in my car.
I've seen the vent mount one at Staples but I don't know if it would work in my car. How long are the arms that clip onto the vent. I have a Mazda 6 and my vents are like the one in the middle of this picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For those who have used the vent clip mount, do you think that it would mount to the vents just above the radio in that picture? When open they have a curved front and they are a bit deeper than the average vent.
wrong thread.
This is what I ended up getting: http://cgi.ebay.com/Car-Windshield-...ccessories?hash=item27ade217c9#ht_3359wt_1165
So far so good... it's has this dumb photo holder (the clear plastic thing) and it came with a pic of an asian chick posed over a car! LOL!
But it's hefty, solid and not a goose neck.
Just got this delivered from Mountek.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Best universal car mount I've ever had. I live in So Cal and go to Vegas frequently so having a windshield (or even dash) mounted phone holder for the car isn't so great in the summer time. Phone gets real hot and it affects the charging.
This feels like it was made with some pretty quality materials and I think the company is based in Northern California so shipping was two days when I ordered it off of Ebay. Paid $17.95 and $4.95 shipping plus CA sales tax. Well worth it.
The charging port is well above the cradle arms so it's easy to put it in. Stays locked in position really well and my Evo with a silicone skin slides in easily enough but stays snug. I like how the bottom piece is detachable so if I want to use it with my iPod Touch or a standalone GPS it'll work just fine and let it stay charged.
It rotates VERY fluidly between portrait and landscape. There's no annoying "click" stops that make others feel and sound cheap. Was using it with the navigation and maps apps and it was great.
I really like how you can adjust the profile of it depending on which way you stick it inside the CD slot. I didn't like it the way it was installed the first time because it blocked my car clock so I put it in "upside down" and it's perfect. The little slots that go inside the slot really seem to grab hold and you can adjust the tightness very easily.
Stays low enough to where I don't feel too nervous running into a 7-11 for something quick having a $500 gadget hanging from the windshield like with others. And like I said it mounts right above the CD player and stays out of the sunlight, also helping with glare issues. Having it right below the A/C vents means it'll keep the phone and battery cool during the summer.
Probably not a great idea for someone who swaps out a lot of CDs while they're driving, but it's not that hard to take off with one had while your driving in a pinch anyway. Besides, who uses CDs anymore anyway? LOL.
Search Ebay for Mountek (cheaper) or order direct:
http://mountek.com/index.php?main_page=product_info&cPath=52_54&products_id=94
(Not spamming, just was so thrilled with this, thought I'd give them a glowing review)
Not my review, but the ones embedded on their Ebay auctions are pretty bland and horrible...
Thanks for the review!
xclusivx said:
Thanks for the review!
Click to expand...
Click to collapse
How about hitting the THANKS button.
newegg had these the other day for 17.xx with free shipping. I ordered 2, glad to see a good review of the product.
I had this dock. Worked great but wouldn't fit my otterbox. Had to send it back for the slip grip car dock.
mattfmartin said:
I had this dock. Worked great but wouldn't fit my otterbox. Had to send it back for the slip grip car dock.
Click to expand...
Click to collapse
Which otterbox? I have the commuter.
I switched back to a palm pre 2 from the evo3d. Anyone wnat one of these? I have it sitting in my car and does no good with the pre. 15 bucks shipped and paypaled.
http://www.cellularoutfitter.com/p-...-note-sgh-i717-att-silicone-cover-black-.html
I'm looking for a cheap thin case that covers the corners and is also slightly raised above the screen, in case I drop it face first the screen will not touch the ground.
I am not even seeing a brand name for this case, but it's cheap, so thinking about getting it.
EvoXOhio said:
http://www.cellularoutfitter.com/p-...-note-sgh-i717-att-silicone-cover-black-.html
I'm looking for a cheap thin case that covers the corners and is also slightly raised above the screen, in case I drop it face first the screen will not touch the ground.
I am not even seeing a brand name for this case, but it's cheap, so thinking about getting it.
Click to expand...
Click to collapse
I have this one I think. Again with no brand name. But I can say that it is a perfectly adequate case for using it on your desk/table however it has a loose fit which when you try to put it in your pocket it wants to come off. Given the price I can't really complain.
thats why they are they have the word cheap in their name lol
$4.00 for the case $5.95 for first class shipping weird
georgios73 said:
I have this one I think. Again with no brand name. But I can say that it is a perfectly adequate case for using it on your desk/table however it has a loose fit which when you try to put it in your pocket it wants to come off. Given the price I can't really complain.
Click to expand...
Click to collapse
Thanks that helps. I don't want one that is going to try and come off. I found some other cheap ones on Amazon.
I bought a couple from Amazon from the company BoxWave, they're pretty high quality and fit well, have raised edges and come in a few different colors.
http://www.amazon.com/BoxWave-Samsu...3M2K/ref=sr_1_1?ie=UTF8&qid=1329855698&sr=8-1
Couple of questions on the Boxwave unit...
Any chance it will work with a cradle type charging unit? If so, which cradle is recommended?
I am looking at the Hyperion unit and it looks like it might actually work.
I cannot post links yet, but Amazon and "Hyperion galaxy note" should get the job done.
Next question is rather odd...I want to be able to set my phone in a cradle in landscape so the connector will not work (obviously). So is there a cradle that will allow the Boxwave unit to remain in place, AND hold the Note in landscape? I do not care about charging in this configuration, as I will just run a cable to my USB port on my PC or charger.
Thanks in advance
Mike
Dacian said:
I bought a couple from Amazon from the company BoxWave, they're pretty high quality and fit well, have raised edges and come in a few different colors.
http://www.amazon.com/BoxWave-Samsu...3M2K/ref=sr_1_1?ie=UTF8&qid=1329855698&sr=8-1
Click to expand...
Click to collapse
Co-sign...I bought this case and I was surprised at the quality. I'm waiting for an Otterbox or something similar, but this case is a perfect fit for the Note and it looks very nice.
I'm not sure about docking capabilities, but it's very easy to take on and off.
I got this one.....
http://www.ebay.com/itm/220949906490?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Fit very well and took about a week.
Rob
I definitely suggest TPU cases. You can get them every bit as cheap, provide similar protection, and will slide in and out of your pocket when you want it to, and will stay there when you don't. Also, due to the snug fit, I have found they allow much less dirt to get inside the case compared to silicone cases, stuf keeping your device scratch free.
I remember that I had a silicone case for my first iPod, a 30gb video, and I was highly disappointed when dust and dirt had scratched the back of my device. Silicone cases don't do much except make your phone grippy. they may defend well against drops, but TPU is just as good and doesn't allow your device to get nearly as dirty/scratched.
Ignore this post.
Dacian said:
I bought a couple from Amazon from the company BoxWave, they're pretty high quality and fit well, have raised edges and come in a few different colors.
http://www.amazon.com/BoxWave-Samsu...3M2K/ref=sr_1_1?ie=UTF8&qid=1329855698&sr=8-1
Click to expand...
Click to collapse
I just bought this one too, thanks!
EvoXOhio said:
I just bought this one too, thanks!
Click to expand...
Click to collapse
I too bought a BoxWave Case....here are some pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just Ordered the Blackout case from Boxwave, looks like it will suffice for now.
Is it thinner than a speck case? I got the Spigen Spg that I like very much but it doesn't protect the front I want a lightweight case.
Retails here for ~65USD.
http://www.shopandroid.com/iottie-easy-one-touch-qi-wireless-car-mount-charger/3A78A21125.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: I was not paid for this review. I did not get this for free but I did get a little discount from a coupon code I had lol.
I was in the the market for a wireless car charger. I have had one in the past, but the location of my Nexus 6 coil was too located to low for it. So my quest to get the perfect one was on! Upon reviews and forums, I was looking at both the iottie and TYLT wireless car chargers. I was initially leaning towards the TYLT one, but the proprietary plug was the deal breaker for me. I didnt need yet another different cable running in my truck. I already have my cool flux capacitor cig charger in place and would hate to lose it! In any case, I then moved my research to the iottie ones. I have heard decent things and first looked at the iottie flex wireless car charger. This looked like the one! But, I saw there were two versions. The flex and the one touch one. What geared me towards the one Easy One Touch version was that of the many MANY ways you can angle and telescope the mount to view your phone. Being having a heavy and big Nexus 6, I liked the various sizes it can accommodate.
When receiving it, I played with all the various gears and levers and screws and found that that this was very well thought out. However, I cant figure out why they put the suction lever to activate the suction cup was underneath the main arm. But its out of the way so thats one thing I guess. The suction cup is clear but has that SUPER suction adhesive that you can rinse off to reconsitute the adhesive, similar to the airdock mounts and various other iottie products use. This sucker is strong! The charger comes with a plate that has more of this sticky suction cups but I already have one mounted so I used that one. Good back up though.
Another fantastic thing is how you insert and remove the phone from the charger. This is the first mount I have ever used that when you put in the phone to charge, you slide it into the back button that snaps the sides in and will lock into place when stops. Awesome. And to remove, simply cup your hand like you are to remove the device and press the two button/levers on the side and pinch together to release into your hand. No issue at all. I am using a Spigen Ultra hybrid case and the Nexus 6 JUST BARELY FITS to lock into place. With the adjustable chin, it is just perfect.
Oh was it a proprietary cable? NOPE, good ol micro usb! Love it even more!
Any questions? Ask away!
I have the iOttie One Touch XL and I love it, but now that I have a Supcase Bettle case on it, it barely fits anymore. I measured my phone with the case on it and is now 3.5" wide. The one you reviewed lists as 3.3" wide. Do you have your phone in a case? If so, which one and do you have any issues getting it to fit?
mohcho said:
I have the iOttie One Touch XL and I love it, but now that I have a Supcase Bettle case on it, it barely fits anymore. I measured my phone with the case on it and is now 3.5" wide. The one you reviewed lists as 3.3" wide. Do you have your phone in a case? If so, which one and do you have any issues getting it to fit?
Click to expand...
Click to collapse
I have the Spigen Ultra hybrid in gunmetal and it just fits. And no issues getting it in and out. And stays sturdy. I did say so in the review. I had to re-read it lol.
Thanks for the quick reply. Might have to reconsider this one if it BARELY fits. Probably just like how it fits into my iOttie XL mount right now.
mohcho said:
Thanks for the quick reply. Might have to reconsider this one if it BARELY fits. Probably just like how it fits into my iOttie XL mount right now.
Click to expand...
Click to collapse
Have you tried the iOttie Easy Flex Wireless one?
http://www.shopandroid.com/iottie-easy-flex-wireless-qi-standard-charging-car-mount/3A78A17740.htm
Looks like it closes to the max of 3.5 inches where the XL fits to 3.3.
I don't know, the problem with the Easy Flex Wireless is that the mount is so short, so hanging it off the windshield might make it hard to reach.
i have got this case for s9+, they do have one for the s9 which is about 2 dollars less expensive, i believe you will get the similar experience as there's not much difference between the two variants.
the edges of case is perfectly cut to the metal sides which makes it feels really natural to hold
NOTE: this is not a carbon fibre case, its made of 100% kevlar/aramid. Carbon fibre as a case would have interference with signals.
MOD EDIT: LINK REMOVED
Per the forum rules, posting affiliate links on XDA is not allowed:
13. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Click to expand...
Click to collapse
THREAD CLOSED
Let the pictures do the talking
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was very impressed by this post
I was very impressed by this post
I had one of these on my S8. I've already ordered one for my S9. If you use a magnetic mount, this case is awesome because is has very thin pieces of metal embedded in the back for the magnets to grip. You can't even tell they are there. I love this case although it is fairly expensive.
Wow bump up for great offer from pitaka!
Guys please email kitty for the updated qi car mount
Emailed! I'll give the mount a try, I have been through so many, and on my current mount and SUPCASE I had to cut the metal ring, so it didn't bulge the case out so much the button were not pressable.
so I've been using this case for about a week on my s9. Definitely a very premium thin case. It adds a a bit of weight to the phone, but gives it a nice heft. Cutouts line up perfectly and the case doesn't interfere with the whitedome screen protector.
My only gripe is that the edges are a bit sharp, so when holding the phone in landscape the edges of the case dig into my fingers a bit. This is compared to the Elago Origin case I was using before, which covers more of the sides of the phone(goes all the way around the power/volume/bixby buttons).
But my main reason for switching to the pitaka was for the built in magnets so I can use a magnetic qi charger.
Got it couple days ago. Very nicely made.
I can second the edges, they are sharp and rough. I guess it is byproduct of it being aramid, but if anything could be done to soften and darken them - it'd be great.
Button cutouts could be wider.
But overall very thin, tightly cut, snug - perfect for the job.
One weird thing was that pitaka advised me that their old mag mount wasn't going to work with new case. I get that magnets and metal inserts are not perfectly aligned, but it would still work fine. As it works with cheap no-name magnet mount. Even without the case S9 works with mag mounts (the problem is glass back which is too slippery, that's where Case works wonders).
But I'll wait for QI charger to see how it works together.
do let us know if it works out well.. I personally don't intent to get the qi wireless car mount,
looks awesome, but for $50 i think i'll pass...
maybe 10% off on OP might help out abit ?
also they have more color ways available now. you can check em out.
Beautiful case would buy in a heart beat but the price is to high .
what if your phone drops facedown?
haha then you have to kneel down and pray to hope for the best when you pick it up
Anyone else experiencing some wobbling when using the case? The case itself is laying down completely flat but when i put my S9 in it the upper left and lower right corner seem to stand out abit so my phone keeps wobbling when i put it down.
As there are new colorways available now, anyone know if it's possible to do a case like this with a Unidirectional weave? There are lots of bike parts coming like this and i like the style.
dallasmanic said:
what if your phone drops facedown?
Click to expand...
Click to collapse
Well, I can share my experience with this case and my shattered S8. This is an excellent case but offers little to no protection if you drop the phone face first or the edge. To put it lightly, the screen is not the only thing that breaks if you happen to drop it at a weird angle.