Have anyone ordered the ikonic edge SuperSlim case for the THD??, it's originaly desgined for the iphone 3G, but as it's 100% genuine leather it can be stretched a little bit to fit the THD.
Moreover, I've contacted them to ask if it fits the THD. And here is the reply:
-----------Quote
Yes the dimensions are almost identical.
In fact I have had a few customers who has bought one
for the HTC. There is no reason why it shouldn't
be a very good fit. I don't have the inner dimensions
but going by the size it will fit the HTC.
iphone 3G Dimensions:
(115.5 by 62.1 by 12.3 mm)
# Weight: 4.7 ounces (133 grams)
HTC Touch HD Specs:
* Dimensions: 115 mm x 63 mm x 12 mm
* Weight: 146 gms
Regards
Dominic
______________________________
Tel (64) (09) 4808386
Mobile (64) 021 50 8686
www.iconic.co.nz
New Zealand's Online Design Shop
-----------UnQuote
But, still am not sure if it will perfectly fit and didn't decide to order one yet!
The leather and design is nice. wondering anyone use to before i get one.
Very nice, makes me proud to be a Kiwi. Was going to order one and in NZ$ and get it sent but works out I would only save a few £ due to the terrible sterling rate
provide information about the fitting of the phone once you get hold of this leather pouch. the temtation of this case is raising from me.
Anyone bought this case yet? please advise if the fitting is not too tight for HD.
Well, since no one reponded yet here is a reply I got from Ikonic Edge regarding this matter:
Hi
We have sold a number of these to HTC
Touch owners as the dimensions are almost
the same. So it fits just as well with the HTC.
Regards
Dominic
______________________________
Tel: (64) (09) 4808386
Fax: (64) (09) 4181142
www.ikonicedge.com
New Zealand Handmade Leather Pouches
Click to expand...
Click to collapse
I am planning on ordering one when I get my HD
Browsing through the site, these cases seem very good quality. One question that occurs to me though; if they're made for the fruitphone, the 'speaker opening' that they tout in their description won't be in the correct place for our HDs.
I have ordered an ikonic edge Super-Slim Card pouch (iPhone 3G) tan colour for my Blackstone.
I will post some pics and short review as soon as I receive it
Hi, any pics yet?
No not yet, didn't receive it yet, hopefully tomorrow!
I'll let u know
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
Well, do the Blackstone designated cases/pouches have an opening on the back
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
There's nothing to worry about as far as the ringing tone goes. I have several different leather pouches designed for Iphone that work perfectly with HD. And since Touch HD actually has the loudest speakerphone out of the whole touch-screen bunch, I can confirm that keeping it inside leather pouch does not affect ringing volume.
I actually noticed that the default HTC soft pouch muffles the sound more then the leather ones.
As for the dimensions, most Iphone accessories will fit Touch HD as well. Only possible problem is that HD is slightly fatter at the bottom, so some stretching may be necessary.
No pics yet???
yeah any updates on this case? interested in getting one but wanted to know from someone who already has one.
It is here....
Ok guys, I got the pouch a couple of days ago
It is just awesome
I'll be posting a review with pics later this evening... stay tuned
The review is up...
Check out the review with pics for this pouch here:
http://forum.xda-developers.com/showthread.php?p=4034898#post4034898
Related
Any good cases out there?
teride said:
Any good cases out there?
Click to expand...
Click to collapse
PDAir are now offering a flip-type black leather case ... 1st I've found.
Probably not the highest of looks - I prefer Covertec myself - but cheap enough (USD$28) and will have to do until the real thing comes along (I always wanted to say that )
I just got my o2 o2(o2 orbit2) yesterday, it fits krusell Orbit Case for HTC3300 perfectly - except the hole on the back doesnt fit camera :-( but anyway i didnt buy it to use it as regular camera. So far i'm happy.
Anyone already found some cases like the one supplied? I'm looking voor a leather one the only one I found is this one http://www.beyzacases.com/cat_vs9.cfm
Boxwave are also selling cases (and other stuff): http://www.boxwave.com/products/dlcase/htc-touch-cruise-designio-leather-case_3046.htm
The credit for finding this goes to Dave Fields who first posted a thread here about Boxwave accessories for the Touch Cruise.
- Julian
Some more cases here. Never bought from this shop.
http://search.stores.ebay.co.uk/neT...fsopZ2QQfsubZ13956052QQsaselZ44385645QQsofpZ0
teride said:
Any good cases out there?
Click to expand...
Click to collapse
I immediately found the belt clip case for the Samsung Blackjack. It is a great fit and a well protected case.
Hi,
I have an Orbit 2 and goy the Pdair flip case last week.
very good and came the next day after ordering
Only issue is the lights on the front are hidden by the case, but for me thats minor.
All other holes for buttons, 2 x camera etc are ok.
Would buy another.
Cost £15 with delivery
The case for the Moto-Q actually works quite well. I got the one that's made by Motorola.
Leather Case for HTC Touch Cruise/HTC
HI guys, I wish buy this leather case. somebody have bought this leather case "pdair" for our Htc Cruise, what do you think? Has another plastic film protector Stitched in the skin?
what do you think?
http://www.pdair.com/catalog/product_info.php?products_id=7159
Leather Case for HTC Touch Cruise/HTC P3650/O2 XDA Orbit II/HTC Polaris 100/Dopod P860 - Flip Type (Black)
US $28.00
Krusell cases
I've been un touch with Krusell , They don't have a case for the HTC Polaris ,
but they promise that "Soon" they will release products for the HTC Polaris,
they promise to let me know....
so I will keep u poseted.
I tried it in the Artemis aluminium case from Pdair and it fits but is a little tight to close the front once inside, camera hole is wrong but otherwise this is the style of case I want, its saved my Arte from many a fall, the case looks battered but the device is still as new - Mike
I have this case, and am impressed with it.
http://www.boxwave.com/products/dlsleeve/htc-touch-cruise-designio-leather-sleeve_3046.htm
butzchan said:
I have this case, and am impressed with it.
http://www.boxwave.com/products/dlsleeve/htc-touch-cruise-designio-leather-sleeve_3046.htm
Click to expand...
Click to collapse
I wanted one, but $30 shipping to Europe is steep for normal mode of shipping
victoradjei said:
I wanted one, but $30 shipping to Europe is steep for normal mode of shipping
Click to expand...
Click to collapse
If you select International and Standard shipping the cost is $9,50.
There is silicone case for polaris ?
I've been very happy with the Bugatti cases I bought for both my XDA Mini S and original Orbit...
http://www.bugatti-mobilecases.de/html/index.php?lang=EN
Bugatti don't offer a case for the Orbit 2/Polaris yet, so I mailed them to ask when it will be available.
Their marketing department told me that it's not available in Germany yet, doh! So I sent them a link to the German O2 site, I await their response with anticipation...
Update: "The XDA Orbit 2 is available in combination with a long-term contract. The device without a contract is extremely expensive. The estimated amount of sold cases does not justify the expense at the moment. Hopefully we will have other possibilities to receive an original device. Please sign up for the newsletter. This seems to be the best to do at the moment."
!!???!!!
Piel Frama
I've been very happy with my previous Piel Frama case for HTC Touch
and I'm a bit quite disappointed by my Boxwave case (except a very good price for a general good quality)
However, in order to get the top of the top leather case for my new Polaris, I will order the new one at Piel Frama
For sure prices are high, especially in US$, but the appointment with quality is set !
There are lots of different thoughts and opinions. But i have never used any cases before. So any suggestions to me is welcome..
bluebee said:
There are lots of different thoughts and opinions. But i have never used any cases before. So any suggestions to me is welcome..
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/4wm-news/14448-new-piel-frama-leather-case-htc-touch-cruise.html
No one has mentioned the excellent vaja cases (http://www.vajacases.com/). I've had several and most recently a "Hermes" / Tytn one. This I'm now using on my belt for the HD but it is an untidy fit as the HD is so much thinner.
Vaja don't have one for the HD - but has anyone found another Vaja case that is a better HD fit? Perhaps a different phone has similar dimensions to the HD ?
Although the Vaja options are expensive and cost a bit for shipping from South America the quality is the best I've ever seen and also the fit is always very good and not so bulky like many of the other brands.
Thanks for tips ...
Im loving the Iphone 3G flip cases, very slick. Hope they release something similar for us.
I have spoen to vaja directly and they do not intend to carry a touch hd case in the near future......its a shame.
8014700 said:
I have spoen to vaja directly and they do not intend to carry a touch hd case in the near future......its a shame.
Click to expand...
Click to collapse
Thanks for checking. Yes, a big shame - but maybe one of the other Vaja cases fits well to the HD ????
Yeah I just had a mail back from them too :
Hi,
At present that model is not in our immediate manufacturing plans.
Anyway, thank you very much for your interest in our cases
Best regards,
Maria Cecilia
Garcia Querol
Customer Care Department
www.vajachoice.com
I'm not convinced that wont change though, Microsoft really seem to be running with the Touch HD as their flagship WM phone, Iv'e seen so many banner ads for WM featuring it recently.
That's so disappointing! Their iPhone 3G cases look awesome, I'd love something similar for the HD. I'll keep my fingers crossed...
Vaja cases for Iphone 2G fits ok
Iphone 2G size: 115 x 61 x 11.6 mm
HD: 115 x 62.8 x 12 mm
Regards
I am looking for a good sport armband to keep my X10 while running. Looking for it, I found a couple of items that seems would fit well : a cheap chinese armband and the Nokia CP-402 ...My only doubt is: would it fit well???
What's your opinion about these items??
Anybody using a sport armband with X10??
If you check by dimensions, there's little room for error
Unless you are looking for a plastic molded holster, then any that fits an iphone will work. I was out looking for cases and whatnot and everyhting that fits the iphone, my x10 fit perfectly. Again unless it was a hard plastic mold type cases which obviously will not fit. WOnt be hard to find one if looking for one that fits an iphone, as there is a million an 1 accessories for the dumb iphone.
using one meant to have around neck but instead of that i tied it on my pants belt loop thing so if i happen to drop my phone it will stop at knee height, has saved my phone twice.
Sent from my X10i using the XDA mobile application powered by Tapatalk
skydirt said:
Unless you are looking for a plastic molded holster, then any that fits an iphone will work.
Click to expand...
Click to collapse
I thought it too. Maybe I was unlucky with the model, but I tried a PURE Arm Band that was made for Iphone and it was ABSOLUTELY impossible to fit the X10 in it! The aperture was just too little...
In any case I think I'll look for an Iphone Armband and hope that it fits well!
Thank you all!
I am looking for one too. Since the Pure didn't fit, I am quite anxious to buy one online. So a proven armband would be nice
Today arrived the Sport Armband I ordered from China trough Ebay (
Look for Gym Sport ArmBand Case Holder for Apple iPhone 3G 3GS).
The building quality is poor,but the materials seems, on the opposite, to be quite good. The X10 perfectly fits inside the pouch and,despite the top is open,I don't risk to loose my phone.
What more? It costed me only 2.99 bucks!
-------------------------------------
Sent via the XDA Tapatalk App
ellobo82 said:
Today arrived the Sport Armband I ordered from China trough Ebay (
Look for Gym Sport ArmBand Case Holder for Apple iPhone 3G 3GS).
The building quality is poor,but the materials seems, on the opposite, to be quite good. The X10 perfectly fits inside the pouch and,despite the top is open,I don't risk to loose my phone.
What more? It costed me only 2.99 bucks!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Hmm, well. It does not sound that bad. But it would be nice with a picture of the armband, if possible?
ukon said:
Hmm, well. It does not sound that bad. But it would be nice with a picture of the armband, if possible?
Click to expand...
Click to collapse
Any news on this?
anyone got lucky and found an armband?
Photo!
Sorry for the hated Iphone inside. After a long period using it I can confirm that it perfectly fits the device (despite being open on the top) and that it is great for running!
ps I posted a Bonamart picture, but if you look on ebay it is plenty of similar items!
ellobo82 said:
Sorry for the hated Iphone inside. After a long period using it I can confirm that it perfectly fits the device (despite being open on the top) and that it is great for running!
ps I posted a Bonamart picture, but if you look on ebay it is plenty of similar items!
Click to expand...
Click to collapse
Hi Lobo.
where did you buy yours?
How is the quality?
Can you post a link please?
thanks
im find it:
http://shop.ebay.com.au/?_from=R40&...band+for+Xperia+X10&_sacat=See-All-Categories
mr.valacky said:
im find it:
http://shop.ebay.com.au/?_from=R40&...band+for+Xperia+X10&_sacat=See-All-Categories
Click to expand...
Click to collapse
yes and you can close it at the top
Exactly!
As you saw it seems there are several versions of the same item, with few differences, sold by several sellers. The whole building quality is middle-low but I never had problems using it.
I preferred to buy the open one, since I was not sure it would fit with the closed top. Anyway, despite being open on the top, it is so tight that the X10 will never slip up!
I found some on ebay. Out of the few the list, there is one made by Motorola, and it's rated "Top-rated Seller."
X10 Sport Armband
Stupid forum rules ... I can't post links.
ebay search: Sport Armband for HTC HD2 Leo EVO 4G Sony Ericsson X10
Just picked this one up on ebay. Hope it fits well ... The x10 is a great phone, but a little bit on the heavy side when jogging My old Nokia Xpress Music 5310 was better that way ... Let me know if anybody wants to know how it is.
Kyrre_Stalsberg said:
Stupid forum rules ... I can't post links.
ebay search: Sport Armband for HTC HD2 Leo EVO 4G Sony Ericsson X10
Just picked this one up on ebay. Hope it fits well ... The x10 is a great phone, but a little bit on the heavy side when jogging My old Nokia Xpress Music 5310 was better that way ... Let me know if anybody wants to know how it is.
Click to expand...
Click to collapse
Have u got it yet? How does it work with x10? Is it closed at the top? Maybe u got a pic to share?
i use the arm strap from the krusell multidapt system - and it fits really well and hold the phone real tight - the krusell multidapt system is really worth its money
x10 sport case
Mckan said:
Have u got it yet? How does it work with x10? Is it closed at the top? Maybe u got a pic to share?
Click to expand...
Click to collapse
Hi. I got it today. Here is a picture (sorry about the flash backfire).
It doesnt close at the top, but it doesn't have to: It fits fine, so I can hold it up-side-down and shake it. It doesn't fall out.
Also, there is a small pocket on the side where you can put away any extra headphone-cable. This was a nice feature. The quality looks overall OK.
Here is the not-so-OK-part: The plastic in front is stiff and lumpy, so the touch is kinda "so-so". Maybe this will get better after some use (maybe the plastic even out), but if you're planing on using the touchscreen alot while it's inside the case, this isn't the case for you.
I'm just gonna use it for music playback while jogging, so for me it's perfect! (7/10)
this is what i've been using. it's a tight fit but the material is stretchy and is able to fit the x10 securely. i bought it last summer for about $10-$15. it doesn't feature a headphone out opening but i use my mw600 bluetooth headphones so i don't need one. it has grip pads on the inside (not shown) to prevent it from sliding down your arm and an adjustable strap.
So twice now I've brought armband, once off Ebay and once off Cellphoneshop.net and neither of them fit. ebay one won't fit at all, the cellphoneshop.net one barely barely fit with no case on, but the cover don't really close properly and the headphone jack hole is on the wrong side!
Anyone know a good jogging armband with clear face cover that will fit the EVO 3D? preferably with a TPU case on.
Is so frustrating when seller advertise something as for our phone and its actually some generic crap!
I'll throw this out there in case it ends up working out for your. I used to try finding clear cases and arm bands but they never really worked very well and I ended up prefering the phone near my waist and running my headphones inside the back of my shirt.
It works great for my uses. I love it for jogging/working out/shooting around (basketball).
SPIbelt sells jogging belts, bands, etc.
http://www.spibelt.com/spibelt.php
http://store.spibelt.com/Waterresistantspibelt-p/7bl-a001-001-waterres.htm
It does not have a clear face. It's just a slim water resistant pouch/belt that you can order to fit your phone. I just specfied "pouch for HTC EVO" when I ordered mine.
Again it does not have a clear face and I wouldn't even say it's "easily accessible". But for holding your phone securely while being very active (I use it for jogging, lifting and shoot arounds) it is very secure. I strap it around my waist and you forget it's there.
Just thought I would throw it out.
bitslizer said:
So twice now I've brought armband, once off Ebay and once off Cellphoneshop.net and neither of them fit. ebay one won't fit at all, the cellphoneshop.net one barely barely fit with no case on, but the cover don't really close properly and the headphone jack hole is on the wrong side!
Anyone know a good jogging armband with clear face cover that will fit the EVO 3D? preferably with a TPU case on.
Is so frustrating when seller advertise something as for our phone and its actually some generic crap!
Click to expand...
Click to collapse
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
m3Jorge said:
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
Click to expand...
Click to collapse
I'm coming to the conclusion i need to buy the expensive armband also, but I was worry they are just more expensive version of the cheap stuff too.
Can you please let me know if the iarmbands one would work with a TPU case on? if it can then it would be perfect. as far as the headphone holes goes i'm not TOO concern, my headphones have very slim jack, and worse come to worse i can always enlarge the hole a little, as long as its in the right general location
bitslizer said:
I'm coming to the conclusion i need to buy the expensive armband also, but I was worry they are just more expensive version of the cheap stuff too.
Can you please let me know if the iarmbands one would work with a TPU case on? if it can then it would be perfect. as far as the headphone holes goes i'm not TOO concern, my headphones have very slim jack, and worse come to worse i can always enlarge the hole a little, as long as its in the right general location
Click to expand...
Click to collapse
Yes I have the Seidio case on it and it fit just fine I will try and get some pictures up for ya latter on tonight...
m3Jorge said:
I went through the same PITA.
Finally found this one which fits beautifully... the little holes for the headphones can be a awkward depending on your plug style/size, but other than that it is the best I've found:
http://www.iarmbands.com/Arm-Band-Armband-for-HTC-EVO-3D-CAB-EVO3d.htm?categoryId=-1
Click to expand...
Click to collapse
Just ordered one so we'll see how it works out.
From the Sensation boards: http://forum.xda-developers.com/showpost.php?p=16715676&postcount=4
Shady Gambino said:
Arkon's XL-Armband fits the Sensation. I have one with the Incipio NGP case and it fits with the case on.
We designed the armband to fit most phones with screen sizes from 3.7" - 4.3". I've tested it with the Sensation as seen above, Thunderbolt (with TPU case), Droid 3, Droid X 2 and a couple others and they fit.
http://www.arkon.com/sports_armband/#xlarmband
$17.95
*Sorry for the annoying servo noise, I had to use a DSLR to record the video since I was using my live Sensation as a model and the auto focus was on :\
Click to expand...
Click to collapse
Pics with the EVO 3D:
It fits a naked EVO 3D nicely, I'd say it would probably fit with a TPU case.
Got my case from iArmband today and I'mot impressed at all. The holes don't line up at all for the headphone jack, it's more of a generic size then specifically for the 3D and the arm strap is way too short.
Edit... So I received an email from iArmbands about my issues with this item. They apologized for the inconvenience and issued a full refund. They also told me to go ahead and keep the product as well...pretty outstanding customer service if you ask me.
I just purchased the Faxion for the DNA and should be arriving late this week. Because it's newer than the dual pro or feather, I was unable to find pictures or reviews of them on a dna. Anyone have the faxion for this phone? I bought mine in black and decided on it rather than the dual pro because it's supposed to be a bit slimmer and narrower. But my wife has the dual pro for her SG3 and looks to be excellent quality so I'm hoping I like the faxion purchase I made sight unseen.
Where'd you order it from?
It's on the Incipio website but I searched on amazon and found it there as well for $28.99 + $2.97 shipping, so I ordered it from there.
Mind making a little review of the case for us? or just give us some insight about the case since you physically have it? Way better than looking at pictures.
blackstallion said:
It's on the Incipio website but I searched on amazon and found it there as well for $28.99 + $2.97 shipping, so I ordered it from there.
Click to expand...
Click to collapse
Cool I ordered one as well
Sent from my red DNA
I like the look of this case a lot. It looks like it will protect well enough for my needs while still being fairly thin.
Is there anyway the back status light is still going to be visible? That might be the deciding factor for me.
Rollingthunder said:
I like the look of this case a lot. It looks like it will protect well enough for my needs while still being fairly thin.
Is there anyway the back status light is still going to be visible? That might be the deciding factor for me.
Click to expand...
Click to collapse
Unless you drill a hole in it, no.
But I think that literally 1 case has a hole for it, so I don't think you'll have much of a choice.
Sent from my HTC6435LVW using xda app-developers app
I might pick one up...my Diztronic is starting to annoy me.
Curious to see how you guys like it...not sure i would like the glossy case exterior... but we'll see.
The dual pro cases are very good, had one for my Gnexus and other older phones before.
Mike
thunderbolt33 said:
Mind making a little review of the case for us? or just give us some insight about the case since you physically have it? Way better than looking at pictures.
Click to expand...
Click to collapse
I don't physically have it yet, supposed to arrive either late this week or early next, I will write a review once I have it.
Sent from my Droid DNA
I just received mine and I have to say it makes it look really nice, its still slim and keeps its curves while adding good protection (I got the grey/yellow one). The only complaint I have is that it is a little slick in the hand, but not too bad. I would take pictures but, I don't have my camera with me :/ would definitely recommend.
Here are pics of the Faxion case on my DNA. Overall the case fits very well. Power and volume buttons are a little hard to press, but that's really not the cases fault. I'm not to crazy about the glossy finish, it's a scratch/scuff magnet (all the pics on the Web did not show this glossy finish), I may have thought twice about buying this case and just gone with the dual pro. However, one of the main reasons I did go with the Faxion is it has a thinner profile than the dual pro, and it doesn't disappoint from that aspect. It doesn't add a lot of weight or extra to the phone, fits nicely in my size 34 jeans pocket The one thing I am completely disappointed about though is the screen protector provided by Incipio. You can see in the picture that because the screen on the DNA is curved on the edges, the protector doesn't stick all the way around for about a mm. I'll have to buy some replacements online.
Sent from my Droid DNA
blackstallion said:
Here are pics of the Faxion case on my DNA. Overall the case fits very well. Power and volume buttons are a little hard to press, but that's really not the cases fault. I'm not to crazy about the glossy finish, it's a scratch/scuff magnet (all the pics on the Web did not show this glossy finish), I may have thought twice about buying this case and just gone with the dual pro. However, one of the main reasons I did go with the Faxion is it has a thinner profile than the dual pro, and it doesn't disappoint from that aspect. It doesn't add a lot of weight or extra to the phone, fits nicely in my size 34 jeans pocket The one thing I am completely disappointed about though is the screen protector provided by Incipio. You can see in the picture that because the screen on the DNA is curved on the edges, the protector doesn't stick all the way around for about a mm. I'll have to buy some replacements online.
Sent from my Droid DNA
Click to expand...
Click to collapse
Actually the dual pro is suppose to be the exact same thickness (according to the specs on incipio's website) and the buttons are a ton easier to press in my opinion.
blackstallion said:
Here are pics of the Faxion case on my DNA. Overall the case fits very well. Power and volume buttons are a little hard to press, but that's really not the cases fault. I'm not to crazy about the glossy finish, it's a scratch/scuff magnet (all the pics on the Web did not show this glossy finish), I may have thought twice about buying this case and just gone with the dual pro. However, one of the main reasons I did go with the Faxion is it has a thinner profile than the dual pro, and it doesn't disappoint from that aspect. It doesn't add a lot of weight or extra to the phone, fits nicely in my size 34 jeans pocket The one thing I am completely disappointed about though is the screen protector provided by Incipio. You can see in the picture that because the screen on the DNA is curved on the edges, the protector doesn't stick all the way around for about a mm. I'll have to buy some replacements online.
Sent from my Droid DNA
Click to expand...
Click to collapse
Doesn't look too bad.... Thanks for the photos!
Sent from my HTC6435LVW using xda app-developers app
I just ordered a black one from amazon.
I was wondering if the white and grey one would get dirty fast?
JoeDroid said:
Actually the dual pro is suppose to be the exact same thickness (according to the specs on incipio's website) and the buttons are a ton easier to press in my opinion.
Click to expand...
Click to collapse
Here are the measurements from their site. The width and depth are a little less for the Faxion.
Faxion Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 2.90 in (73.66 mm)
Depth: 0.40 in (10.16 mm)
Weight: 1.3 oz
Dual Pro Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 3.00 in (76.20 mm)
Depth: 0.50 in (12.70 mm)
Weight: 1.3 oz
Sent from my Droid DNA
blackstallion said:
Here are the measurements from their site. The width and depth are a little less for the Faxion.
Faxion Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 2.90 in (73.66 mm)
Depth: 0.40 in (10.16 mm)
Weight: 1.3 oz
Dual Pro Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 3.00 in (76.20 mm)
Depth: 0.50 in (12.70 mm)
Weight: 1.3 oz
Sent from my Droid DNA
Click to expand...
Click to collapse
So they are the same thickness like he said....
One piece of warning regarding this case, the microusb charging cable doesn't work because the backshell on the microusb side of the cable that plugs into the phones charging port is to thick with the HTC provided cable. I had to use my wife's cable from her Samsung SG3 that has a thinner profile backshell.
Sent from my Droid DNA
Disregard my statement above regarding the microusb cable that comes with the phone, it does work just fine with this case. I was using a cable from another device I've had in the past and that's where I was having issues.
Sent from my Droid DNA
i received my dual pro today and its great as to be expected from a 2 part case (silicon, hard plastic) all the buttons are easy to hit unlike the otterbox i have and this case feels real nice in the hands the included screen protector feels cheap but dosent take away from the quality of the screen like most free protectors do, overall i'm very satisfied this is exactly what i've wanted since i got the phone.