And yes - I have checked that the "don't charge while connected to USB" option is not ticked.
In addition, the screen will say lit throughout the process and I can't seem to find a way to switch it off. If I press the standby button, it stoppes the USB connection and switches off - only for 1 minute that is.
I'm using the latest 1.57 WWE stock rom. Any suggestions?
Thanks
itayd said:
And yes - I have checked that the "don't charge while connected to USB" option is not ticked.
In addition, the screen will say lit throughout the process and I can't seem to find a way to switch it off. If I press the standby button, it stoppes the USB connection and switches off - only for 1 minute that is.
I'm using the latest 1.57 WWE stock rom. Any suggestions?
Thanks
Click to expand...
Click to collapse
Unless you want to keep ur stock rom, try soft resetting first. If still there, then go for a hard reset. If its still there even after a hard reset, then its highly possible of a rom issue.
Previously my stock rom crashes when I disable manila, cannot re-enable it again unless did a soft reset. Then I tried doing a hard reset because it might be on some apps that I have installed but the same thing happened.
Related
After an upgrade to dcd latest ROM 2.2.6 and Radio I have found that when my phone sleeps or I turn it off it doesn’t always turn back on I need to soft reset it. I am even tried an earlier Rom version 2.2.1 and still the problem.
This is a Telecom New Zealand phone and as for normal practice they don't give out their Rom's so I can't just flash back
With some playing I think I have tracked it down to only causing this issue when my data push is enabled ie, don't sync up to an exchange server and the phone works fine.
I am aware from other posts there are others out there with the same issue, can you check if this is the same with your phone. Turn off all your data connections and delete your exchange server and see if you phone then behaves.
I know people are saying it could be the Bootloader but if the above is the cause then I don't think it is in the loader and maybe dcd can help us track it.
I have tracked this problem down to when activesync does a Microsoft Direct puch while the phone is in standby. To connect to our work's mail server we need to also create a VPN connection (not using SSL) as long as I put in a wrong name or password causing activesync never to be able to sync then the power button turns the phone on everytime. If I also connect and sync (while phone is on) then dissconnet my VPN and and change password then the phone still works fine.
Does anyone has any idea where I should be looking, as I would like to have my Direct push email working.
Sorry to jack your thread, but I have a very similar problem. Sometimes when my phone goes on standby when I'm on the phone and my conversation is finished. I cant power back on my phone either. The green light still flashes, but the power button does nothing! Anyone have that same problem?
I've also had this problem. When I press the power button the phone would enter standby mode and when I pressed it again it wouldn't wake up. The only way around it I found for my phone is to install S2U2 and set it so it activates when the backlight turns off. That seems to catch it before it whatever happens to not let the phone wake up happens. So now when I press the power button, the screen cuts off and S2U2 opens. Hope this helps.
I have similar problems. Maybe I'll try using S2U2 ...
Same problems, doesn't seem to wake up if it goes to sleep while VPN is running... any fix?
I had the same issue when I flashed my ROM with the USB connection. It could be the bootloader. because I then used the SD card bootloader and re-loaded my ROM from the SD card and it resolved the issue.
I would recommend reinstalling from the SD card using the no2chem.
My sprint/boost mobile HTC Diamond Touch phone suddenly just hung and stayed on the lock slider screen. I cannot answer calls or do anything. I tried to soft and hard reset the device and every time I tried all the reset combination, the phone just kept vibrating for a long time without anything happening. I flashed the rom and when it came back up, it showed the green windows ver 6.1 screen and it tells me to "tap the screen to set up your windows mobile based device"
I have tried tapping the screen with the stylus and nothing happens. Don't know what else to do. I am open to re flash as I have my data backed up and don't mind losing the data. Also my sliding keyboard has stopped working weeks before this recent problem. Any ideas?
Thanks for any help
alwezl8
Which ROM did you flash?
I'm asking this since you posted on the Touch Pro forum.
HTC diamond touch pro is the cell phone for Sprint.
alwezl8 said:
My sprint/boost mobile HTC Diamond Touch phone suddenly just hung and stayed on the lock slider screen. I cannot answer calls or do anything. I tried to soft and hard reset the device and every time I tried all the reset combination, the phone just kept vibrating for a long time without anything happening. I flashed the rom and when it came back up, it showed the green windows ver 6.1 screen and it tells me to "tap the screen to set up your windows mobile based device"
I have tried tapping the screen with the stylus and nothing happens. Don't know what else to do. I am open to re flash as I have my data backed up and don't mind losing the data. Also my sliding keyboard has stopped working weeks before this recent problem. Any ideas?
Thanks for any help
alwezl8
Click to expand...
Click to collapse
I don't have a ROM preference, but if you're trying to reflash and you can't do it through activesync, all you have to do is connect the TP to the PC w/usb cable, hold down the power and volume down button while pressing and releasing the reset button with the stylus (while leaving the power/volume down pressed). It will keep it in the SPL mode, but you should be able to reflash in that mode.
elektrik2001 said:
I don't have a ROM preference, but if you're trying to reflash and you can't do it through activesync, all you have to do is connect the TP to the PC w/usb cable, hold down the power and volume down button while pressing and releasing the reset button with the stylus (while leaving the power/volume down pressed). It will keep it in the SPL mode, but you should be able to reflash in that mode.
Click to expand...
Click to collapse
Thanks. I took it to a repair store and they told me that the touch screen is faulty and needs to be replaced. They have ordered the replacement screen and hopefully, I will be able to reflash it after.
Hi there!
I have the following problem with my S3 (bualf1 austrian vodafone branding )
The screen stays on after the charger is plugged and the screen turns on after charging is complete!
I've done a factory reset and the problem has seemed to solved, but yesterday the problem has occured again!
I've really tried everything (every option, enabling / disabling everything, uninstalling apps, ...)
When shutting the phone down, the screen reacts as supposed (turns off while charging )
Any suggestion for me?
Sent from my GT-I9300 using xda app-developers app
No idea anyone?
Sent from my GT-I9300 using xda app-developers app
Check the developer options
Sent from my Galaxy Nexus
Already done, tested everything!
Sent from my GT-I9300 using xda app-developers app
sirtech said:
Already done, tested everything!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
same problem as mine, occured only once. my workaround is by manually lock the phone (press power button). what kernel you use?
Are you absolutely sure this is not linked to a software you have installed?
There are certain titles that allow you to leave the screen on whilst being charged. Look carefully, it could be quite obscure.
As you said, it cleared when you did a Factory Reset but has now returned ~ thus indicating a recently installed App has resumed the screen on operation.
In reference to the phone coming on when fully charged, that is normal but the most likely reason it is not going back off again is due to whatever App setting you have that is then telling the phone once the screen is on keep it on.
bejoanakmami said:
same problem as mine, occured only once. my workaround is by manually lock the phone (press power button). what kernel you use?
Click to expand...
Click to collapse
Stock kernel, stock (austrian branded) firmware!
Manually locking works for me, but when den charging is finished the phone's display turns (and stays) on - that is my problem!
Beards said:
Are you absolutely sure this is not linked to a software you have installed?
There are certain titles that allow you to leave the screen on whilst being charged. Look carefully, it could be quite obscure.
As you said, it cleared when you did a Factory Reset but has now returned ~ thus indicating a recently installed App has resumed the screen on operation.
In reference to the phone coming on when fully charged, that is normal but the most likely reason it is not going back off again is due to whatever App setting you have that is then telling the phone once the screen is on keep it on.
Click to expand...
Click to collapse
Thats the same thinkings i have, but i didn't managed to find out, what app this could be...
the strange thing is, it works as intended when no power source is plugged (screen turns off after 30 seconds), it just doesn't turn off while charging
no idea anyone?
sirtech said:
no idea anyone?
Click to expand...
Click to collapse
I'm afraid without knowing which Apps you have installed it would be difficult to find the culprit.
If it were me I would do the following:-
1. Factory Reset again only this time do it from Recovery ~ [The recovery mode in Samsung Galaxy S III can be entered by pressing the Volume Up Key, Center button, and holding both simultaneously press the Power Button]
2. From the options provided select Wipe data/factory reset and also you need to select Wipe Cache partition and then reboot your device by selecting reboot system. You now have a completely cleared system so the next stage is important.....
3. Just install the settings, nothing more and certainly don't let Google Play reinstall your Apps.
4. Connect your power cable and see if once the S3 is charged the screen comes ON to notify you it is charged BUT THE SCREEN THEN TURNS OFF after a brief period. If it does then you at least will know under the basic setup your phone is fine. Now another slow but probably most important bit........
5. Start installing your Apps (say ten at a time) and then reboot your phone when all ten are installed and again start charging the phone.
At this stage we want to see what happens after charging is complete. If all is fine you then know what Apps are installed don't effect the screen ON problem, so continue installing another ten Apps and again reboot the phone and apply the charger to see if once charged the screen turns ON then OFF.
Continue repeating this procedure until you notice after a charge the screen this time does not turn OFF.
6. Right..... you now know the problem is being caused by one of the last ten Apps you installed. So, uninstall each App in turn (making sure you reboot each and every time you uninstall) and again recharge. This should eventually lead to one individual App that has caused the problem (the remaining Apps you uninstalled from the last ten can now be re-installed).
7. Investigate that App thoroughly to see if it alters anything on your phone that is causing the problem. Also name the App so we can look at it too.
It's a slow process granted but it's the only way you are going to find out what is causing the issue.
Basically, if it's happening from a fresh Factory Reset (via Recovery using the methods I mentioned above) then it's an issue directly with the phone.
If all is well then it's an issue with an individual App.
Good Hunting......
Same thing happened to me today and i never noticed it happen before..
Went to plug the phone in and the screen was on so i figured "Oh it will turn off after 15 seconds like usual" came back 5 minutes later still on.... uhh okay, so i hit the power button the screen went off.. I went to the restroom came back.. SCREEN BACK ON AGAIN? hmmm dubya tee eff? Turned it off again with the power button.. This time it stayed off..
Stock firmware latest upgraded 2 days after the 4th of the july.
Which firmware do you have?
Sent from my GT-I9300 using xda app-developers app
Well, that's what i've done:
1.) factory reset
2.) reinstall all settings and mailaccounts
3.) reboot and see if it still works
4.) install and configure 5 apps
5.) reboot and see if it still works
6.) repeat steps 4. und 5. as long as all apps are reinstalled and reconfigured
and so, finally the guilty app was found!
EXTENDED CONTROLS causes the problem, that the screen stays on when a charger is plugged!
Tested it on all 4 own mobiles, all of them are working as normal again!!!
THANKS BEARD!!!
Hi, everyone. I've seen the other threads and no one had a problem quite like mine.
Yesterday I've upgraded my Alcatel OT-997, ICS 4.0.4. with Kuano's TWRP and now it's:
Alcatel OT-997D, JB 4.1.1. - (details in this thread, 5th post) http://forum.xda-developers.com/showthread.php?t=1981692&page=89
D means I can now use two SIM cards, which is cool.
The problem is the damn thing doesn't charge when it's turned on. It shows the lightning bolt over the battery icon, but in settings shows that charger is not connected. However, when it's turned off it charges, normally. I tried different settings in USB menu: Mass storage, MTP, Camera mode and Charge. Tried with and without Debugging mode. All of those work when connected to a computer in the sense that I can use internal storage, access both SD cards, and so on. But it doesn't charge.
I have tried 3 different cables, 3 wall outlets, and 2 PCs so it's not that. I suppose it's not a hardware problem otherwise it wouldn't charge properly when it's turned off.
So now I use schedule to turn it off before I go to sleep, and to turn on before I wake up, so it would charge while I'm sleeping. Anyone's got any ideas how to fix it?
Bump
Well I solved it with reinstall
Finally I've lost my patience so I tried the only thing that was left.
First I did a backup with TWRP.
Then, factory reset from TWRP.
Then, restore system from One Touch Upgrade 2.8.0 - lost the DUAL capability, software restored to 4.0.4.
Now comes the interesting part. It had the same problem as before, did not charge while on. So I tried a solution I found online a while ago but I never tried when on 4.1.1: Turn it off, connect charger, remove battery, wait a bit, press power button for approx 10 sec (nothing hapens), wait a bit, instert battery, turn it on and there it is. I'm not sure if it was this procedure that did the trick or it simply needed a reboot after update but it worked. It showed "charging" in battery stats.
Finally, restore with TWRP as Kuano explained in his post. Mind you, when I did the restore it was connected to my PC all the time.
Now two things I you should know:
First, before I did all this I connected it to my PC while turned off i.e. (PC - ON, phone - OFF). I noticed this: it was constantly connecting and disconnecting (the "piano chord" notification was coming from the computer speakers every 5 sec) like I was pulling the cable in and out. That is all I know about this, I didn't have the nerves to work on it.
Second, now that it is restored and charging, when I connected it to PC it couldn't change USB setting from Charge to MTP. It reported an error something like "service stopped". This happened only once and I did not try to do it again, I just don't have the energy for any more problem fixing right now. It charges, and I use airdroid for file transfer, that is all I need for now. If and when I get around to take a look at it I'll post here if there's something interesting.
Hello to all,
Phone is Galaxy S3 running JB 4.3 stock. I ''played'' with options, more precisely I was clicking Developer options, until the end (7 times - activate it)... because of my stupid curiosity. Now, with developer options being enabled, I'm having problems with phone doesn't recognize USB, whether I want to connect it to PC, or charge via charger.
w.w.w.youtube.com/watch?v=-qnsU1yiH_w#t=22
On this link it's showed how to disable developer options, but you can't do it on Samsung phone (!!!). I know I have to do factory reset, but before that I want to backup everything I need. The thing is that currently I'm having 13% of a battery available, and I need to fix this USB/charger issue to be able to further work. Now it's turned off (doesn't charge in this state too), because if I run out of battery I'm scared I won't be able to start it up again.
P.S. I tried to check/uncheck USB debugging... nothing happens.
I know this is a 100% software problem, and I hope you guys know the solution. Googled it earlier, no similar topic.
Thanks in advance!
Sorted it out.
But what a crazy 1-1.5 hour is behind me. First activated ''Revoke USB debugging authorization'' at Developer options. Haven't recognise USB/charger. Then went to App manager -> All -> Settings -> Force stop. Then the party began. It randomly activated handsfree, car mode and S-voice. Then it locked itself while partying in backstage. Then it couldn't recognize my drawing pattern. Don't know my pin, can't type google account because of processes pooping from behind. Shut down, took me to ''downloading do not turn off target''. I was seconds from literally reset it through the window. Then it suddenly recognized pattern, I restarted it, and now it works like a charm. In short: never do force stop, especially on Settings.
Now I'm gonna backup all, and do the factory reset. And I'll have trauma clicking on android version for some time...