Hi all
i installed the sin rom :
O2 XDA II->WM2003SE->Sin->Merged->v2.0
http://forum.xda-developers.com/viewtopic.php?t=16916&postdays=0&postorder=asc&start=125
The rom is great But two problems I face,
First during a long phone call, may be when the device goes on standby the call is hanged up?????
second I installed the Bluetooth tools, which as we all know is is still nut compatible with wm2003se but during a phone call sometimes the speaker and mic on device continue working although I am having a conversation using the but headsets
Third when I plug my earphones in the device to hear music and a phone call comes in, instead of hearing the ring only in the earphones' the device rings as well
can any one help
Re: help with O2 XDA II->WM2003SE->Sin->Merged->
k_blal said:
First during a long phone call, may be when the device goes on standby the call is hanged up?????
second I installed the Bluetooth tools, which as we all know is is still nut compatible with wm2003se but during a phone call sometimes the speaker and mic on device continue working although I am having a conversation using the but headsets
Third when I plug my earphones in the device to hear music and a phone call comes in, instead of hearing the ring only in the earphones' the device rings as well
can any one help
Click to expand...
Click to collapse
Hi there, I installed the same rom, but I didn't have your 1st problem, 2nd problem YES.
1st problem, unfortunately the longest call I had was about 7 minutes recently but everything was alright, no cut off. How long was your call and what time do you set the device to go standby ? "Turn off device if not used for ? minutes".
2nd problem, I wouldn't have known this if you didn't bring it up as I rarely use the earphones. But I can confirm that I too experience the same thing. The ringer goes off even when the earphone is plugged in.
Re: help with O2 XDA II->WM2003SE->Sin->Merged->
k_blal said:
second I installed the Bluetooth tools, which as we all know is is still nut compatible with wm2003se but during a phone call sometimes the speaker and mic on device continue working although I am having a conversation using the but headsets
Click to expand...
Click to collapse
I have the same problem. When I', using my phone and have it in my handsfree holder in the car - both the bluetooth and the speakers turn on, and therefor I can not use my bluetooth headset....
Hi,
A couple of weeks ago, MW600 was working as expected. But at the moment, I've got connection problems. Is anyone experiencing anything similar, or do you have any tips?
I have tried restarting both the phone and the MW. The radio function works perfectly. I have tried renaming my phone.
Here's what I'm doing:
* Turn on MW
* Turn on bluetooth on phone
* Search for units -> pair the two units using code 0000 (starting from scratch, just in case)
* Phone states that MW is connected to phone and media sound
* If mediascape is playing, I hear ~1 second of media sound
* After 1-3 seconds, MW makes a sound (5 descending tones) -> the phone briefly states that MW is connected to media sound only -> the phone goes back to stating that the two units are paired (no connection)
What do you think?
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
I found the battery life to be a bit short....10 minutes of streaming music and it shut off, all this after overnight charging.....I have repeat this 'issue' Friday night, Saturday and Sunday only to have MW600 dead at the office now
My runs 12-15 hours! Without any Problems.
Same, I can use mine for at least 4 days (about one and a half hours a day) before it needs recharging - are you using the right charger?
sergiu84 said:
Mine doesn't do that, so it's quite odd.. Do a full reset of the MW600 (manual here: turn off, press and hold down power until pairing indication appears, press power and call buttons simultaneously until headset turns off), delete it form the phone and try again. There's no reason for it to do that.
Click to expand...
Click to collapse
Thanks for this suggestion. A full reset solved the problem.
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Alleniv said:
Hi, how to perform it? I don't understand when I have to press call + power buttons!
Click to expand...
Click to collapse
You press the buttons on the MW600 itself, not on the phone. Read the manual that I linked to, it's all in there.
hmm anyone else have problem with the ringtone playing thru the mw600? when the phone rings. i can hear it ring on the bt headset. but it's like play a bit.. then i hear a beep.. then it plays a bit more.. and beep it's like intermittent
The beep means, that the headset is changing from the mediamode to the telephonemode.
Update... The problem above came back. If seems related to using bluetooth and wifi simultaneously. Whenever I'm using BT and enable wifi, BT gets a lot of problems and usually shuts down. Does this happen to anyone else?
Also, in the past I could use the buttons on the headset to change songs etc. That doesn't work anymore, even after resetting the headset etc. Is anyone else experiencing this?
-------------------------------------
Sent via the XDA Tapatalk App
I have problems with MW600 too.
Sometime stays connected for hours and sometime is disconnecting 3 times in 5 min.
I have wifi on 24h/day so, i didn't test without wifi.
i only get disconectet when i try to make a call ... looks like ist sw issue on the x10 since the mw600 dose not make this on other phone .. but that is an nother problem then you have.. BUT !!! i hade the exact same problem includet to what i have now befor i updatet the x10 to the .16 version
edit: my problem is solved. needet to reset it 2 times befor it workt
murmeljenta said:
Thanks for this suggestion. A full reset solved the problem.
Click to expand...
Click to collapse
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
murmeljenta said:
Update... Problem keeps coming back. My supplier suggested that BT and wifi might interfere. I'd be very surprised if a "smartphone" cannot play music over bluetooth and surf using wifi at the same time. My supplier promised to check it out and get back to me... That was ~2 weeks ago.
Is ANYONE else experiencing the same problem? Can you listen to music over BT, then enable wifi, connect to a network, and keep listening to music over BT?
Click to expand...
Click to collapse
I have wifi on 24h/day and most of the time i don't have any problems but sometime they get disconnected and i have to turn off/on BT and everything runs fine after.
I will have to try without wifi
Bluetooth and Wireless LAN (WiFi) both uses the same frequency space (~2.5 GHz)
Most of the times Bluetooth should be smart enough to adjust the frequency to co-exist with WiFi devices.
If your area are crowded with other Bluetooth devices and WiFi access-points, the Bluetooth set might having trouble settle on one quiet frequency, and might just sit there trying to switch frequency all the time, never finding a good frequency to settle on.
To help those poor Bluetooth devices along the way, try to change the WiFi access-points channels to create a free channel where the Bluetooth devices can settle on.
Also check if your WiFi access-points have a "Co-exist with Bluetooth" option, and enable it. It will however reduce the frequency-width and therefore the bandwidth slightly on the WiFi, but Bluetooth devices should work with less interruptions.
Connection problem with s60
Hello!
I have an MW600 as well - using with an s60 symbian nokia (6650 fold).
It works corectly when using in bt mode and listening music from the phone, but it alwways lost connection when turm the handsfree to radio. When listening radio, zthere is no connection, no way to get the calls or answer.
Do somebady have the same problem or somebody know how to solve it?
I did reset on mw600 and paired again, but i have the same problem.
á
i haven't had any problems with my MW. i always stream music from my pc via wifi to my X10, then to my MW via BT, witch is connected to a Reciver for party.
have you tryed restarting your MW after pairing.
My problem with this headset is that it doesn't:
1) caller name not displayed on incoming calls
2) Music/Mp3 tags not displayed on lcd (using Poweramp)
3) why does the phones itself rings not the headset just some beeps. Embarrassing when phone rings and then answer on headset.
Resetted but not solved any problems.
Wildfire running Wildpuzzle 0.8 with kernel 4.1 overclocked
Ok I m using mw600 stereo bluetooth headset with CM 6.1.3 V4.4 rom for 2 days now. The pairing is easy but the issues that I am facing are;
* phone has crashed/rebooted couple of times while pairing/ unpairing.
* besides first fact, it pairs without any problems and very easily.
* I have used it with mixzing and doubletwist media players. In both cases the music lags and sometimes the lag/pause is about 2-3 seconds long.
* incoming call shows phone number only, no contact name.
* voice dialing works.
* when I m listening to music or not listening to music on incoming call the headset converts to phone mode fine but after the call is finished, the headset doesnt reverts back to media mode that is, the music doesn't plays again and I tried connecting and disconnecting again but only way to make it work again is restart the headset.
* battery is so far ok for the headset. Infact I runned out of my phone battery while I was trapped in underground and listening to music.lol
* even the headset is connected, if I play youtube video, the sound comes from the phone speaker. In order for it to come from headset I have to play some music from using my headset controls and then play the video and then pause the track. This also happens with music app aswell sometimes. Like the headset is connected and if I play the song using my phone, it will play through phone speaker and I have to pause it and play it using my headset controls in order to listen through my headset.
So far its oki but its annoying the laggy music thing. It only occours in music playback, I spoke to my mate on phone for couple of hours using this headset and both ends could listen loud and clear.
i also paired it with my inspiron duo tablet and its working flawlessly....so anyone have any work around of the above mentioned problems? anyone facing the same problems? is it because i am using custom ROM? i am ok with the headset not showing song tags and stuff but music being laggy is not acceptable...because thats what i bought it for!
Any help would be much appreciated?
thanks
Hello guys.
I was wondering if you can help me with a problem I have with my S3.
When I am in a video call (without earphones - speakers working) the first five to ten minutes are fine. I can hear the other contact well without problems. But in the period from 5th minute to 10th sound (from speakers) its like I have slowed down the volume one click before the full volume down. But the volume bar is full. When earphones are connected are working full without problem. This problem is on tango and skype as well.
(my m/b was changed due to the familiar freeze problem)
no single answer?????
pls help
Factory reset.
jje
Regular call with speakers on does the same
I was wrong. It does the same thing in regular call as well when I have the speakers on. The solution is the same?
I have recently purchased a Lenovo IdeaTab A2109-F which I was quite happy with, since this was the first time I have used an android tablet as I am coming from iOS background.Before I bought the tablet, I read that id had double microphone in order to make voice calls such as Skype clearer. Now , at first it seemed all good and I had people saying that the audio being received is clear and crisp on the other end of the call.
However after 2-3 mins in a call (every call) the microphone then goes really weird and audio being received from it becomes mumbled until it completely degrades where it seems like just random noises, sometimes it even goes all quiet. What I have noticed however , if I blow into the microphone it then goes all good again.
At first I thought it was a Skype app issue and so I downloaded a microphone voice recorder (memo recording sort of app) and same observations were made where voice being recorded completely degrades within 3 minutes of the recording, where blowing into the microphone temporary fixes the problem until it happens again after a minute or so.
Now I am lost here , I really like the tablet and I really doubt it's a hardware issue for some reason. I have a suspicion that something is either upping/lowering the sensitivity of the microphone and where blowing into the microphone seems to then readjust it.
I really hope somebody could help me out, maybe there is an app that allows to change microphone settings , or maybe something else that I could try out.
Thanks for your time! :good:
P.S Android Version: 4.1.1 and latest Skype app. I also tried upgrading the firmware, same problem was observed.
I still have the same issue on my Lenovo A2109. Skype, Line or any internet call, voice degrades within 8 - 10 mts and I had to end the call and re-do the call again. VERY ANNOYING... I thought it was just my tablet. I didn't try the trick of blowing into the microphone. Thanks for the tip. Did you get a solution yet? I thought upgrading would help. But thanks for confirming.
igiz said:
I have recently purchased a Lenovo IdeaTab A2109-F which I was quite happy with, since this was the first time I have used an android tablet as I am coming from iOS background.Before I bought the tablet, I read that id had double microphone in order to make voice calls such as Skype clearer. Now , at first it seemed all good and I had people saying that the audio being received is clear and crisp on the other end of the call.
However after 2-3 mins in a call (every call) the microphone then goes really weird and audio being received from it becomes mumbled until it completely degrades where it seems like just random noises, sometimes it even goes all quiet. What I have noticed however , if I blow into the microphone it then goes all good again.
At first I thought it was a Skype app issue and so I downloaded a microphone voice recorder (memo recording sort of app) and same observations were made where voice being recorded completely degrades within 3 minutes of the recording, where blowing into the microphone temporary fixes the problem until it happens again after a minute or so.
Now I am lost here , I really like the tablet and I really doubt it's a hardware issue for some reason. I have a suspicion that something is either upping/lowering the sensitivity of the microphone and where blowing into the microphone seems to then readjust it.
I really hope somebody could help me out, maybe there is an app that allows to change microphone settings , or maybe something else that I could try out.
Thanks for your time! :good:
P.S Android Version: 4.1.1 and latest Skype app. I also tried upgrading the firmware, same problem was observed.
Click to expand...
Click to collapse
Asked a question a while back about the issue with Bluetooth audio cutting back to the phone speaker, is there a fix out for it yet? If not, do Huawei know about the bug?
Thanks
Original post text below.
I have this little problem with my new Huawei.
(I have a Mate 10 Pro, couldn't find a section for that specific model)
Whenever I connect it to my car or Bluetooth headphones, the audio from my phone will randomly switch from my car speakers or my headphones to the phone speakers. The only way to get it outputting audio through the Bluetooth device again, is by reseting my Bluetooth connection. However, it does this every time and its driving me insane.
Can someone help me with this? Thanks in advance.
Click to expand...
Click to collapse
My mate 10 pro have terrible bluetooth problems with my earphones, sbc low quality and very noisy. Acc totally broken.
Hxxli said:
Asked a question a while back about the issue with Bluetooth audio cutting back to the phone speaker, is there a fix out for it yet? If not, do Huawei know about the bug?
Thanks
Original post text below.
Click to expand...
Click to collapse
Can't help with a solution I'm afraid but I get the same on BLA-L09 C782, firmware 131. It sometimes refuses to connect to anything until I switch into airplane mode and back.
Other times it will connect fine then switch to loudspeaker almost immediately - even though bluetooth still says it's connected (and the play/pause button works on the device). It seems fairly random and reconnecting a few times gets it to work for a while, but it's annoying when it happens while driving.
My guess is that it's an audio routing issue, so most likely a software glitch.
Has anyone switched to a treble rom and still finding the problem? Or has anyone noticed it has gone with a later firmware update?