MS3 Config v0.16 - Many new features! - Windows Mobile Apps and Games

This project is no longer active due do a hard-drive crash and my loss of the source code.. To anyone looking for an active and up-to-date solution, I would suggest naong's MobileSense and his BackgroundChanger. It is very similar to MS3Config and I believe he will be implementing more features as time goes on.
Spb Mobile Shell 3 Configuration Utility (MS3Config v0.16)
---------------------------------------------------------------------
This is a small application I am developing that I hope will evolve into a full-fledged skin editor for Spb Mobile Shell 3. At the moment it only has the ability to change panel backgrounds (among some other helpful tool options), but it has a decent GUI and is unique in that it does not overwrite any changes that have previously been made to your copy of MS3 by other skins or widget packs... I have a long way to go but take a look at the features in the changes list and the planned features below it... Please give as much feedback as possible, good or bad, and don't hesitate to make suggestions... This is my attempt at giving back to the community, please enjoy it ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9/6/9 - Changes and bug-fixes (v0.16):
--1. Added the ability to add and remove images or backgrounds, and choose which background is applied to which panel.
--2. Added image rotation, re-sizing, and re-naming.
--3. Added thumbnails in the panels and backgrounds tabs.
--4. Added selectable viewing options "Large icons", and "Small icons" in all tabs with thumbnails.
--5. Added "check all", "un-check all", and "assign to checked" options in the panels tab for easier and faster background changing.
--6. WVGA and WQVGA scrolling problem fixed.
--7. Added the "Carousel" tab for manipulating your panel carousel or tiled panel view. Allows adding, removing, re-naming, and re-ordering the items in your panel views.
--8. Added new file picking dialog for adding images and choosing an external image editor. Includes a more intuitive split tree and file view with icons and image thumbnails. Also adds the ability to change the view type and delete or re-name files.
--9. Added more panels to the "Panels" tab.
--10. Added more utilities to the options dialog.
--11. Alot more small changes and bug-fixes I can't remember.
------------- Quick Start Instructions: -------------
PLEASE USE THE File>Backup OPTION TO BACKUP FILES THAT WILL BE MODIFIED BEFORE MAKING ANY CHANGES... I TAKE NO RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE, INCONVIENIENCE TO YOUR DAILY ROUTINE, OR ANNOYANCE TO YOUR GEEKING/TWEEKING EXPERIENCE...
-- 1. Download the .CAB at the end of the post and install (The VGA and QVGA versions differ only in the size of the included sample images)
-- 2. Run "MS3 Config".
-- 3. Tap on the "Images" tab and use the context menus to add and prepare your images.
-- 4. Tap on the "Backgrounds" tab and use the context menus to add and prepare your background. (A background is a set of two images that will be used for Portrait and Landscape views in your panels)
-- 5. Tap on the "Panels" tab and use the check boxes to enable or disable skinning for each panel. Use the context menus to assign a background to each panel.
-- 6. Open the "File" menu and choose "Apply changes".
-- 7. Tap "Yes" when prompted to re-start Mobile Shell 3.
-- 8. Exit MS3 Config, wait for Mobile Shell 3 to start, and admire your changes.
Requirements:
Tested on my Touch Pro and Mogul, both are running custom WM6.5 ROMs ...
Also tested on various platforms through emulators.
Requirements should be:
-- 1. WM6 or higher...
-- 2. .NET CF 3.5 Runtimes installed...
-- 3. Spb Mobile Shell 3 installed.

MS3Config v0.15 with VGA backgrounds included
MS3Config v0.15 with QVGA backgrounds included
6/22/9 - Changes (v0.15):
-- 1. Scrolling bug fixed.
-- 2. Added two more slots to the Images panel.
-- 3. Now includes original artwork by volDeus and MoonCat.
-- 4. Images are now more evenly distributed throughout available panels.
-- 5. All images are now converted to optimal format for MS3 performance and low memory use.
-- 6. Added "Global Background" image slot and panel option.
-- 7. Added standard panels; Contact - Select Picture, FaceBook Contact Selector, FaceBook Picture Selector, FaceBook Sign-In, Spb Menu Items.
-- 8. Replaced "Restart MS3" menu item with expanding menu including; Status, Stop, Start, Restart.
-- 9. Added "Select All" and "Select None" buttons to the "Panels" tab.
-- 10. Removed "Vertical Slide" image slots and changed corresponding panels to full-screen, fixed backgrounds.
-- 11. Added link to home forum thread in about page.
-- 12. Other minor bugfixes.
MS3 Config v0.14 Download
6/8/9 - Changes (v0.14):
-- 1. Image format support added; Jpeg, GIF, PNG
-- 2. Bugfixes.
MS3 Config v0.13 Download
6/8/9 - Changes (v0.13):
-- 1. Bugfixes.
MS3 Config v0.12 Download
6/8/9 - Changes (v0.12):
-- 1. Added settings file "MS3C.xml" to installation folder ... Directory paths that MS3Config will use can be set here..
-- 2. New image browser.
MS3 Config v0.11 Download
6/7/9 - Changes (v0.11):
-- 1. Added panels; Panel Carousel, Panel Carousel (accelerated), Contact - Edit Picture, Favorite Contacts.
MS3 Config v0.10 Download
6/6/9 - Changes (v0.10):
-- 1. Full parsing of MS3's XML files to prevent problems with other Spb Mobile Shell 3 add-ons and mods.
-- 2. Backup and Restore options.
-- 3. Ability to choose which panels will be modified.
-- 4. Ability to undo changes simply by disabling the panel that was changed.
-- 5. Image browser shows the current images as thumbnails and allows choosing a different file or opening the file in your associated image editor.
-- 6. Checking for redundant packing and unpacking now makes applying small changes much faster than in ALPHA.
-- 7. Ability to quickly restart Spb Mobile Shell 3 to view your changes.
-- 8. Progress is indicated wherever possible.
Planned Changes:
-- 1. Ability to add more images to the "Images" tab.
-- 2. Ability to choose which image is applied to each panel individually.
-- 3. More panels available to modify.
-- 4. Ability to resize images and alter bounding rectangles to control behaviour during kinetic scrolling and panning. (Especially with long panels like the Launcher and Spb Start Menu)
-- 5. Ability to Import/Export skin settings for moving to another device.
-- 6. Error checking and logging so that I can respond to bugs that people with other devices might find.
-- 7. Incorporate common tricks and tweaks available from the community for for easy installation/removal .. and the ability to combine tricks and mods that otherwise might over-write each other.
-- 8. Detect and save changes made by other mods, skins, or widget packs so that they can be combined with each other and with the content already available in MS3Config.
The "About" tab.
General information about MS3Config.
The "Panels" tab.
Use this tab to choose which MS3 panels you want to change the background of.
The "Images" tab.
Use this tab to view and change the images that will be used for backgrounds.
The Professional Panel with the included background applied.
The Tiled Panel View with included backgrounds applied.

can't get it to work on my samsung omnia.
It starts up, but when i press "panels" i get an error and the program is stopping.

sahus said:
can't get it to work on my samsung omnia.
It starts up, but when i press "panels" i get an error and the program is stopping.
Click to expand...
Click to collapse
Is your copy of MS3 a clean install?

no i have installed msskips widgets

sahus said:
no i have installed msskips widgets
Click to expand...
Click to collapse
I just did a quick test and it's working fine on my TP with mskips base package and with his launcher_taskbar_contacts package ...
Hopefully I'll be able to help you more once I've added logging to the app.

maybe you add function to disable things connected with GSM?
some people use pocket pc without GSM module

ozziuss said:
maybe you add function to disable things connected with GSM?
some people use pocket pc without GSM module
Click to expand...
Click to collapse
The application was developed and tested on a CDMA device ...
I didn't think that anything in it would have been affected by the radio type anyway ... Which things are you talking about specifically?

Come on people ... over 160 views including v0.1 and no more comments? ... Please if you take the time to install and try it out .. Let me know if it worked and if you like it ...
Thanks ...

not working on diamond
Hello,
Tried it on Diamond. Program itself is working fine, but it actually changes nothing.
Backgrounds stay the same as original.
Sorry.
Kind regards

ducati said:
Hello,
Tried it on Diamond. Program itself is working fine, but it actually changes nothing.
Backgrounds stay the same as original.
Sorry.
Kind regards
Click to expand...
Click to collapse
Have you tried changing the backgrounds to some of your own? I installed the app on my friend's Mogul this morning and noticed that everything was patched correctly but only half of the panels actually showed backgrounds ...
Maybe it has something to do with the fact that the resolutions of the images I included are meant for VGA displays ...
Try changing the images to something smaller and let me know what happens

Error when press panels
sahus said:
can't get it to work on my samsung omnia.
It starts up, but when i press "panels" i get an error and the program is stopping.
Click to expand...
Click to collapse
I have the same problem

alijan said:
I have the same problem
Click to expand...
Click to collapse
What is the installation folder for your copy of MS3? .. The folder with MobileShell.exe in it ...

I found a bug:
It worked great and changed the backgrounds just like intended. But I am using the titanium theme for MS3 and when you scroll down the new background ends you scroll into the old background. It seems your program crops the image to your screen size and thats all.

iPAQ 614c
Works just fine on my QVGA, havent tried it on VGA devices. This is very good work. I hope this will eventually be fully integrated with all Themes, widgets etc. Yes, this is very much needed!!
Sunday

xjohnx said:
I found a bug:
It worked great and changed the backgrounds just like intended. But I am using the titanium theme for MS3 and when you scroll down the new background ends you scroll into the old background. It seems your program crops the image to your screen size and thats all.
Click to expand...
Click to collapse
I'm still learning the specifics regarding the scrolling behavior and backgrounds but I'll look into it as soon as possible ...
You say that scrolling past the background you set with MS3Config will show the background from the Titanium theme below it? ... Which panels do you see this behavior and do you have a link to a download of the Titanium theme handy? I'm away from my desktop but I'll try to reproduce the problem you are describing.
gkleding said:
Works just fine on my QVGA, havent tried it on VGA devices. This is very good work. I hope this will eventually be fully integrated with all Themes, widgets etc. Yes, this is very much needed!!
Sunday
Click to expand...
Click to collapse
Thank you for the feedback ... That is my hope as well ...

sahus said:
can't get it to work on my samsung omnia.
It starts up, but when i press "panels" i get an error and the program is stopping.
Click to expand...
Click to collapse
Same problem on my Diamond (Clean 3.0.1 + mskip pro widget plus)

pbv302 said:
Same problem on my Diamond (Clean 3.0.1 + mskip pro widget plus)
Click to expand...
Click to collapse
Can you check which folder your copy of Spb Mobile Shell 3 is installed in and let me know ...

THANKs volDeus
my Q :
Quote:
Originally Posted by abumhmmd1
any chance for WM5
volDeus reply :
The installer should allow it to be installed on WM5 .. Have you tried?
If it doesn't work and requires alot of work to port .. Most likely not for a while ..
Especially considering I have no WM5 device to test it on.

In Spanish doesn't work!!
In Spanish, the default folder is \Archivos de programa\... for M3 and M3Config. When I try the 'panels' menu in M3Config, this error appears:
\Program Files\Spb Mobile Shell\qa_layouts.dat is not a valid zip file
And it's normal, cause the correct file is in '\Archivos de programa\Spb Mobile Shell\...' how can I change this? A registry entry?
Thanks a lot for your help!!!

Related

[App] [Feb-7-09] Manilla 2D Customizer v0.29.235 (2nd attempt at digi clock bug)

Manilla 2D Customizer (M2DC)
LATEST DOWNLOAD HERE (February 7 v0.29.235)
If you find M2DC useful, please consider giving a donation
All donators will have their names added to the about page
DONATORS
My wife and daughter - Love and support
Myself - Countless hours of programming
TWolf - Program Icon
mchapman007 (aka MobileMatt)- Theme files for development
mchapman007- $$$
kwill - $$$
LoriInWa - $$$
Mattster_spv - $$$
yongchoon - $$$
tyguy - $$$
G. (aka guido11) - $$$
Jstar (aka JstarLuvsTina) - $$$
Whosdaman - $$$
jsoneng - $$$, Beta Tester v14
AllTheWay - $$$
showaco - $$$, Beta Tester v14, $$$
debarron - Beta Tester v14
dashmaster1000 - Beta Tester v14
ldostang - $$$
micman[lalo] - $$$
Slaphappy100 - $$$
robertus3d - $$$
sschlesinger - $$$
Zak from ZaksEnterprises.com - $$$
scotchua - $$$
jesusishere - $$$
Jaxboater - $$$
RaNg3r - $$$
scrosler - $$$
Pablo Villasuso - $$$
epimazzo - $$$
skr_xd - $$$
kidnamedalbert - software help
claus1953 - support help
<your name here for a donation of $1 or more>
Click to expand...
Click to collapse
If you have problems downloading from the above link (like google code is forbidden in your country), try downloading form the sourceforge page
You must have Manilla 2D Installed in order to run this program
you can get it here http://forum.xda-developers.com/showthread.php?t=398173
Manilla 2D Skins!!!
http://forum.xda-developers.com/showthread.php?t=425974
This is an BETA version of the project, I am doing it for my own benefit at this point, feel free to use this tool, but I offer no guarantee that it will work, or that it won't delete your original Manilla 2D settings, or that I will continue to develop/support it.
I am a MFC programmer by day, but this is my first Windows Mobile project, so go easy on the comments please
Acknowledgments
Once TF2D came out I immediately tried to install and run the Diamond TF3D Config 0.6.7 by sushilange, unfortunately it didn't work, I started to follow the thread but have come to the conclusion that it is a Diamond App and will most likely not be tailored to work with Manilla 2D
I am starting this project because I do not like my home screen too cluttered so I disable a fair amount of tabs in Manilla2D and wanted a way to do this that was simpler than hand editing xml files...
First there are many people to thank because in no way am I trying to take credit for other peoples work
Thanks to udk, noonski, vetvito, hergzilla and the rest for getting Manilla 2D out and working, I was in the forums while vetvito and noonski were finishing and releasing the first beta and despite how geeky it sounds I must say that it was a pretty exciting time
Thanks to sushilange for inspiration via his diamond TF3D config program
http://forum.xda-developers.com/showthread.php?t=405749
(thanks to wmexperts.com for reporting on it back in July http://www.wmexperts.com/articles/howto/hack_away_at_touchflo_3d.html)
and finally thanks to camro for his post that started me down the path of tweaking my setup
http://forum.xda-developers.com/showthread.php?t=426351
one last thanks to emunutz for the original HTC home Customizer
http://forum.xda-developers.com/showthread.php?t=319308
http://www.pocketemu.com
Thank you all for your support of M2DC
God bless
Feb-7-2009
v0.29.235
- 2nd attmpt at fixing digital clock shift bug
Jan-30-2009
v0.28.233
- fixed digital clock shift bug
Dec-13-2008
v0.27.232
- added "Apply the settings to all fonts" button on the font dialog
- increased the color picker drop down combo box length
- updated donator list
Dec-01-2008
v0.26.230
- updated donator list
- added option to not update the TabIcons images and settings from a new skin
UPDATE Nov-29-2008
v0.25.227
- added new dialog with 1 option "Don't update Weather Tab", so you can choose if you
want to use your existing weather settings or use the new weather settings
UPDATE Nov-24-2008
Nov-24-2008
v0.24.225
- fixed background bug, only worked with "\Windows\ManilaGFX" folder, now works with
"\Windows" folder too.
- fixed some formatting on the m2dct inside of a zip file warning box
- moved some code around so you are not waiting for 5 seconds after you hit apply,
now the spinning cursor should come up immediately
UPDATE Nov-24-2008
v.0.23.223
- added a new background page that will let you specify a png image to use as the
Manila2D background. Right now there is no way to go back to the "default"
background, only restoring a theme, or applying a new theme can change your
background. This feature only supports "hh_fw_background.png" files that are
located in "\Windows" and "\Windows\MainlaGFX" which should satisfy 99% of users
but if you have issues let me know and I will read the value directly from the
HTCHomeSettings.xml file
- fonts drop down boxes are much larger now, much more easy to read
- added warning about a theme file that contains an m2dct file, hopefully this will
cut down on some confusion
- updated donator list
UPDATE Nov-11-2008
v.0.22.215
- added an internet page that allows you to set a different default internet browser
for Manila 2D version 20 (build 1.0.1820.3328)
UPDATE Nov-10-2008
v.0.21.213
- added more fonts [Messaging, interent, settings, weather] (Manila2D v20 only)
- added ability to add a folder of themes in the theme manager, this folder will
be remembered and every time you restart M2DC will look for new themes in that
folder
- updated donator list (I think)
- fixed build process (again... stupid devenv not knowing how to handle dependencies)
- uninstaller no longer applies your backed up theme
UPDATE Nov-04-2008
v0.20.207
- reverted xml file handling back to the version 13 method, the new method caused the latest
build of M2DC to not load after a theme was set through M2DC.
- updated about page with new donators
- added new font entry for the weather pag error text
- fixed a spelling error (thanks p1tater)
UPDATE Nov-02-2008
v0.19.203
- Added 2 new font items, weather tab low temperature, and weather tab forecast temperature
neither of thee will allow a color to be set, not sure why, if you figure it out please
let me know
- removed experimental WM5 support... the cab will allow installation on a WM 5 device,
but this app is being built with the WM6 SDK. The WM5 support messed up my build process
- fixed bug with version not being displayed correctly on the about page (see above reason)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the following message has been adapted from A_Cs S2U2 post
(@ALL LINK POSTERS: I know most of you do not post the donation link on your reposted message. That's fine. But I hope you can at least post the link of this thread so that your visitors know the source of M2DC, and rather than uploading the M2DC cab that you downloaded please post a link to this page as the above link will always point to the latest version. Thanks.)
MY 1.0 TODO LIST
- Add support for setting the default folder to open in the file manager dialog
- Add backup/restore for the registry key [HKLM\SOftware\HTC\Manila2D]
- "Implement the possibility to choose custom icons for the launcher. That could be a drop down list of the launcher buttons, where one can choose which button, and a button to choose the path for the icon."
REASONABLE REQUESTSThese are things that have been requested that I think are reasonable, they are not at the top of my list at the moment, but they may make it there in the future
- Add support for detecting what a theme file contains... ie make m2DC smart enough to know if the theme file is only weather icons, or that the theme file does not have an analog clock, If the theme file does not contain something in the xml or contain the actual files then don't use the xml or files for that settings
- Add support for picking and choosing which parts of a theme to apply. Show a list of theme components with check boxes that the user can check and un-check the specific things that he want sot apply. (only apply digital clock form theme A, only apply background and tabs from theme B, only apply weather icons from theme C)
- add option to hide tab bar and the non active tab icons link
- add option to display theme information link
- add option for start menu customization link
- add new favorites to the internet tab link
- add option to change the date format link
- add support for changing the launcher item icon link
- add option to apply welcome screens contained in theme files
- add functionality to be able to apply a skin via a command line argument link
- add support for adding things to the operator tab link
MY WISH LISTThese are things that I want to do, but I will need to invest some significant time into research to get them working
- add option to deal with *.tsk files (maybe copy the file to the windows directory and figure out the proper way to apply the theme in code...)
- add option to extract/apply themes that exist as cab files? (extract cab file contents on the fly cabextract.org)
REQUESTSI doubt I will do any of these things (I try to give a reason as to why)
- Add an option to auto rotate the applied skin every 30 minutes or so
Reason I don't see how this really benefits anyone, maybe I will do it after everything else on this list is done, but that will probably never happen. Maybe I will add command line arguments so that you can create a mortscript or something
- change tab functionalitynew run method
Reason This uses a 3rd party program that I did not develop, and it seems pretty extreme, If a simpler method is found I will re evaluate this request
- add new tabs
Reason I have no idea how to do this, I know that they can do it for Manilla3D, and i looked into it, but right now I have no idea how to do it for Manilla2D. When someone figures this out let me know and I will see if I can put it into M2DC
- add custom cities to the weather widget
Reason right now this is possible to do by hand, my city is in the default htchomesettings.xml file already, adding the ability to connect to the internet and get information from a website will take a lot of time and effort on my part, and I think that my time would be better dedicated to the more important features of M2DC
- Add option to have more than 1 upcoming appointment on the home screen
Reason I have no idea how to do this, and I don't use the calendar on my device so I always end up hiding even the 1 appointment on the home screen.
- Allow for more rows and columns in the people tab
Reason The people tab xml is just one huge mess, it is really hard to do by hand, and just thinking about the code that I would have to write to make this work makes my head hurt. I don't use the people tab right now so I don't think I will put myself through the pain of doing this. Let me know if this is a huge request for you.
- Smart phone compatibility
ReasonI do not own a smart phone, and I have only received 1 request for this, let me know if there are more people that want this
wow great tool , thank you
first the SPB MS customizer now this..
i have tears of joy running down my face at this point
Looking forward to further development of this!
JstarLuvsTina said:
first the SPB MS customizer now this..
i have tears of joy running down my face at this point
Click to expand...
Click to collapse
agree with you,thanks mpenguin14,great tools
mpenguin14 said:
KNOWN ISSUES:
- must be installed to the device, paths are hard coded for now
- not sure how well this will run on non English roms, right now some paths are hard coded such as "\Program Files\M2DC"
- icon is fugly, needs some work (help appreciated)
- restore defaults doesn't truly restore defaults, it just restores the entire HTCHomeSettings.xml file from when you first ran this tool
- ???
* All of these issues should be addressed in a future release
Click to expand...
Click to collapse
u may want to talk to user/rom guru "garmin" about ur icons..or even "bluemetalaxe".. to me they got the best icons around.
YES!!!! Can get rid of some of these useless tabs.... and maybe a way of custom weather soon? Closest one is New York City... about 3hrs away.
Just a suggestion can this be registered with apptodate? Makes updating my phone so much easier
if you could make it wm standard friendly. as without being able to select a tab and then hit move up without scrolling through the list to the bottom.
but this works on windows mobile standard using my mobiler
Nice work. The ability to change what app/plugin goes into a tab would be nice if possible. I would like to use Weather Panel instead of HTC Weather and to change the Homescreen.
Wow excelent, great work!
Just a couple of requests....
Could it be possible to choose....
Add more buttons to launcher by pcarvalho:
http://forum.xda-developers.com/showpost.php?p=2648154&postcount=262
and to switch between clocks...
TF2D digital clock by pcarvalho:
http://forum.xda-developers.com/showpost.php?p=2640528&postcount=113
and, this is wet dream, i know, but...a Theme chooser:
http://forum.xda-developers.com/showthread.php?t=425974
wshader said:
YES!!!! Can get rid of some of these useless tabs.... and maybe a way of custom weather soon? Closest one is New York City... about 3hrs away.
Just a suggestion can this be registered with apptodate? Makes updating my phone so much easier
Click to expand...
Click to collapse
there is a tutorial in the Manila2D thread search...ive added 4 custom cities and its getting weather perfectly..
shortyboy said:
there is a tutorial in the Manila2D thread search...ive added 4 custom cities and its getting weather perfectly..
Click to expand...
Click to collapse
thanks for rubbing it in..
i havent been able to get weather since the release!
so whats ur secret?
look for the HH_409_weather_cities.xml or something named like that in the \windows directory....copy that to your computer>open the xml file with either an xml editor like xml notepad 2007(free) or notepad.edit any of the top cities and insert you city name, location, state etc...and insert your zipcode or weather code(get this from www.accuweather.com,located at the end of url).save and overwrite in windows directory,soft reset and your set.
JstarLuvsTina said:
thanks for rubbing it in..
i havent been able to get weather since the release!
so whats ur secret?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2264002&postcount=3
Check out the post by Scotchua.
About the icon, if you like this, here is my small contribution:
Attached already in .ico format.
http://forum.xda-developers.com/showthread.php?t=407777
Hopefully this app can grow to be as versatile as SSMaPa. I would like the ability to change what the calendar link points to, etc.
Great work on the first step.
cannot uncheck tab on Udk Polaris manila ROM
The tabs in UDK Polaris manila2D ROM cannot be unchecked. The program runs but the same config comes back again after the program exists and reload TF2D.
The same thing for 6x4 launcher....
I am doing something wrong or the ROM is locked so that it cannot be changed? Please advise.
thks
>>>Edit
I can manual edit HTCHomesettings.xml file and able to remove mail, internet, and location tabs and also copy the setting from pcarvalho 6X4 launcher. THANKS pcarvalho! I now have 6x4 launcher on UDK polaris manila2D ROM! COOL!!!
you saving many lifes now
it would be really great if functionality could be added to change where widgets link to or possibly change urls without editing xml.
so people can use custom calendars/different internet browser/install things in different locations etc ^^
Nice program though

[09/06] Titanizer 7.02: Titanium Plugin Editor (small update)

Titanizer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is just a simple flash tool to edit the "tabs" of the WM6.5 plugin (Titanium).
The aspect is simple and draggable. You can change the order and remove the tabs you dont want.
You can also add new tabs (to add/test new plugins) and change the Left SoftKey.
This is only a plugin manager, it doesnt install plugins, for that you can find them in the excelent thread All WM6.5 Titanium plugins by thedaniel:
http://forum.xda-developers.com/showthread.php?t=511052
Small update:
----------------
- Added CS2P plugin
- Added TWolf plugin
- Added CDigiClock plugin
- Just replace your data.txt with the zipped one.
New version 7.02:
-------------------
- Minor visual changes.
- Fixed nem bug where a swapped tab couldnt be re-chosen for a different plugin.
- Fixed bug when jumping from 24 plugins screen to 16 that caused the application to go berserk.
- Fixed strange bug in the 24 plugins screen that didnt allow the third column to swap tabs.
- Added taskanium plugin
- Added new settings plugin
- Started programming the routine to read the real regkeys (uff)... Its not ready to use yet, but you can see its results already by pressing the ENTER softkey on the main screen. It will only read the first 24 plugins, like this app, and everything else in "undefined" (unused).
Version 7.01:
-------------------
- Fixed a bug on the MyPhotos plugin (thanks for the tip, nandar).
- Created a new routine to check how many plugins are enabled, this makes the plugin layout jump back to areas 5, 10, 16 or 24 if the correct empty spaces are available.
- Added option to swap plugin with empty buttons.
- Fixed bug that forced you to change the plugin if you dragged a button back to itself.
- Some visual cleanups and blinged graphics.
- Added the "Are you sure?" message in enable and disable all plugins (I think this was needed, since it would flush your previous settings).
- Added Restore button, to put the default settings, in case you messed up something (thanks for the idea, mallman).
- The maximum characters on left button link are now 50, this seems to be the correct limitation.
- Changed the order of the plugins, the 4 most used I've seen around are now the first.
- The splashScreen and exit screen take now exacly 1 second to dissapear, sorry about this, but it needs to load and save a lot of variables and registry settings.
To use:
-------
- Have WM6.5 º_^
- Install Flash 7 (Flash Lite 3.1 doesnt work).
- Install the latest CAB.
- You have 5 empty tabs available at start.
- To load a plugin just press the tab you want and a new area appears, where you can select one of the (currently) available 25 plugins.
- If you want to change the order of the plugins simply drag it to the one you want to trade with.
- To remove, drag it to the trash area.
- Once you select a plugin to the last button the layout will change to 5, 10, 16 or 24 tabs. I dont think anyone uses more than 24 at the same time, but I can add more in the future.
- To add new plugins, in the select plugin area, choose NEW PLUGIN, and there you can write the name (optional) and code of the plugin (code example: CClock).
- When the final version is out, updating to the latest plugins should be as simple as updatin the data.txt file.
- You can also write a plugin GROUP (for example, Code: CClock;CHome;ATFavePeople), this lets you have your favorite plugins all in one tab. Its not needed for now, since you have all the current plugins to choose from, but... this is usefull to me, since I can add in the weather or twitter tab all the different plugin names existing and it only shows the ones you have installed. ^_^
- You can also select all of the available tabs or select none, cleaning all your customizations.
- Restore is only used in case something goes horribly, horribly wrong...
- As before, the left softkey button can be changed in its own area. Use the special buttons wisely.
Older versions on post #3 below.
To do:
------
- Add icon to CS2P plugin
- Add icon to TWolf plugin
- Add icon to CDigiClock plugin
- Add a "NOT INSTALLED" warning on plugins that you dont currently have (if it can be done).
- Add a online update to the data.txt file (thats the plugin database, its on the same folder as the Titanizer).
- Read the "real" registry names, not just my saved database.
Thanks to:
------
I used a today screen refresher from hotdog53 and Wedge helped a lot in the code (wouldnt work without it) and creating the CAB.
-----
Atention, Showaco released CHome Editor!
It has much more options and its very customizable! ^_^
Nice one, i'll try it. Used "Titanium Customizer" atm. Lets see which one win!
_________Version 7:__________
Version 7:
---------------
- All new.
- Previous versions removed, because after version 7 the editor changed completly.
agree your app is nicer
Well done
But at least you don't need to install flash to use mine ^^
lpaso said:
agree your app is nicer
Well done
But at least you don't need to install flash to use mine ^^
Click to expand...
Click to collapse
Not a competition... Maybe we can do a better one together?
Awesome
Was just thinking we need this
oh damm, found a more advanced one:
http://forum.xda-developers.com/showthread.php?t=393104
Not sure how it works on non-smartphones. :/
Looks good twolf, gonna test this on my Tilt.
I guess it be prefered, if you didnot make it in FLASH cause some dont have FLASH and need ti spcly for ur APP i know VB.Net and can make Apps 4 WM devices, but i just cant figure it out how wuld it update the panels info using REGs :S
Hello,
Thanks for the usefull app. I haven't tiried yet but I have an idea.
Is it possible to set this exe to ( Instead ) :
Start Menu -> Settings -> Today -> Items ( Tab ) -> Options ( Button ).
Something like HTC Home.
It will be great if this works.
Anyway, Thanks again.
twolf said:
oh damm, found a more advanced one:
http://forum.xda-developers.com/showthread.php?t=393104
Not sure how it works on non-smartphones. :/
Click to expand...
Click to collapse
Yep, I don't think so....
Dude, this worked like a charm. I installed adobe flash 7, then your customizer, and unchecked the panels I didn't want. Keep up the good work. I think the cooks should use this in their roms
this is for the windows default today screen and not for the touchpro 2 tflo3d right?
TheDude1120 said:
this is for the windows default today screen and not for the touchpro 2 tflo3d right?
Click to expand...
Click to collapse
Yes, ur right!!
xda2_haseeb said:
Yes, ur right!!
Click to expand...
Click to collapse
cool, thanks
do you know of a program that can rearrange the programs on the start menu, now they fall in the order you install them and i kinda want certain apps @ the top, how can this be achieved
TheDude1120 said:
cool, thanks
do you know of a program that can rearrange the programs on the start menu, now they fall in the order you install them and i kinda want certain apps @ the top, how can this be achieved
Click to expand...
Click to collapse
press and hold on the icons and tap "Move to Top".
TheDude1120 said:
cool, thanks
do you know of a program that can rearrange the programs on the start menu, now they fall in the order you install them and i kinda want certain apps @ the top, how can this be achieved
Click to expand...
Click to collapse
yes CRACINGs right do the way he told u, press and hold on the icons and tap "Move to Top".
CRACING said:
press and hold on the icons and tap "Move to Top".
Click to expand...
Click to collapse
dammit u have just made my day lol, good look
theres a problem with this, it doesnt make room for customizations, it worked fine, but after i reinstall titanium weather, all the old tabs come right back, when i reconfigure them, titanium weather is gone. Is there a fix for this? or perhaps a better weather plug in?
TheDude1120 said:
theres a problem with this, it doesnt make room for customizations, it worked fine, but after i reinstall titanium weather, all the old tabs come right back, when i reconfigure them, titanium weather is gone. Is there a fix for this? or perhaps a better weather plug in?
Click to expand...
Click to collapse
Try this app http://forum.xda-developers.com/showthread.php?t=497232 it works gr8, i used it and am using titanium weather and have no such problem
twolf said:
lol, I looked for a app like that, and didnt found any... Thats why I made mine.
---edit---
Hmmmm, just tested "Titanium Customizer", not as easy to use... :/
Click to expand...
Click to collapse
as always, use the "Search" task ^^
Did u think that Ok, yours is much easier than customizer.. But both of them should do their work!
But i wonder if its possible to add a new panel to titanium.. Maybe with Prog. shortcuts, or something else. What do u think ?!

[WM6.5] [Titanium plugin] TWolf Multiplugin v1.6c (New menus, more options)

TWolf Multiplugin / Multi Settings Editor:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First I have to thank a couple of ppl, whithout whom this plugin would not see the light of day:
rPereira, chriscsh, MrDSL and dgaud007 for the great ideas, plugin fixes and CAB optimization.
APBilbo, for the excelent message to registry app.
This works on Mortscript (that already comes with Titanium Weather) and takes about 160kb or ram on your device.
Contents:
-----------
- First page:
The first page has the skinned clock, small date and the current weather. The weather info and icon is taken from Showaco's Titanium weather. No point on creating a separated weather viewer when that is already perfect.
If a sms or missed call is received the icons and numbers pop-up on the page.
The main button opens a pre-chosen link (in my case Resco Explorer, all this is configurable in the Settings), the bottom right button updates the weather (it takes about 10 secs, so be patient).
If there is a missed call or new message, the main button changes to call history or message app.
Also, if you have any alarms enabled, it will show a icon, but if you have any unread SMS, the ALARM icon is hidden by the SMS icon.
- Second page:
The system bars are on the second page.
The main button opens Memory settings and the right button open Multi Settings , the left refreshes the plugin, if needed.
If your memory card is not named "STORAGE CARD", then you must change it on the settings. The battery icon becomes on fire when its being charged.
- Third page:
The third page is a SMS viewer, with the help of APBilbo's (Throttle Launcher) Message2Reg.exe.
Click to open a menu that lets you see the all the messages/reply/create new message, the left softkey to see the previous and the right button to see the next.
- Fourth page:
A image viewer is on page 4. You need to configure the folder you want to see on the MultiSettings.
Click to open a menu that lets you see the current image/refresh the image list/set image as wallpaper (limites to image size and extension), the left softkey to see the previous and the right button to see the next.
It lists the images on first run (or every time you run the Settings), and it takes some tiem, depending on how many images are there, so be patient.
Please note that bigger images take longer to load. Also, it loads ALL files, so if you have non-image files in there, it will show a red cross instead.
- Condensed view:
The condensed view shows the small weather icon with temperature, the clock (in text view) and the notification icons (if there are any).
The clock, notifications and battery charge icon auto-updates every 1 second. The rest, every 10 seconds.
To use:
------------
- Install Titanium weather (if for some strange reason you havent already and configure your city on it). This also installs Mortscript, that is the base of my plugin.
- Install my attached CAB into your device (if it gives you a error during install, use the attached script-fix made by rPereira.)
- If you are updating, run the Kill_TWolf.mscr script that is on the Acessories folder in Start menu, BEFORE installing the new CAB.
- You can customize some settings if you open the MultiSettings editor (you need Flash 7 to run it).
- All the icons, clock, bars and shortcuts can be easily skinned and configurable on the instalation folder..
- Reset and enjoy!
v1.6:
What's new in v1.6c:
---------------------
- Fixed small bug that didnt open the main image. A manual fix is also here: http://forum.xda-developers.com/showpost.php?p=4115269&postcount=395
- Removed the other buggy versions... :/
What's new in v1.6b:
---------------------
- Fixed a small bug that caused the SMS menu not being centered. A manual fix is already here:
http://forum.xda-developers.com/showpost.php?p=4111994&postcount=387
What's new in v1.6:
---------------------
- The main button on the picture page opens kvvQuickMenu.
- The main button on the sms page also opens a menu.
- Reply to sms on the menu
- New sms on the menu
- Refresh list on the menu
- Add as wallpaper on the menu (restricted to jpg images with your screen size)
- Different refresh mode
- Changed the network signal check
- Removed the refresh list from TWolf.mscr, its now manual (less time on boot).
- Added a "are you sure?" dialog to the refresh list
- Removed some unnecessary files from the CAB.
- v1.5 moved to post #4.
Errors:
--------
- Before updating, run the Kill_TWolf.mscr script that is on the Acessories folder in Start menu.
- If you have a error installing, run the attached rPereira fix first.
- If the clock starts to change size continuously, go to the second page and use the left softkey button REFRESH.
- If you have a error opening a shortcut, change it on the MultiSettings that is on the second page right Softkey.
- If the MultiSettings editor doesnt close properly, you need to install Flash 7,
- If the weather icon is giving an error, update your Titanium weather with this small fix: http://forum.xda-developers.com/showpost.php?p=3949075&postcount=1077
- If the left button doesnt change for some reason... Post here a PNG screenshot with the correct size of your today screen. If you dont know how to do this, install mymobiler.com and post here a screenshot of your screen, make sure the size is correct. Since this forum transforms the PNGs in JPGs youll need to host it outside, for example, you can host your image on imageshack.us .
- If your weather icons have a wierd size, I'd advice the Beyond Invisible Iconset.
- If you reset your device with notifications pending, that link becomes the default, even after the notifications disappear. I have to think of a way to fix this, but in the meantime, ppl can use the MultiSettings to fix it manually.
- If you want this plugin to become your default plugin (the one that appears when you press the red button), simply place it on top of the other plugins and disable the default clock, with Titanizer or Chome.
- If your SMS menu isnt centered, run this script.
-If the main image doest open with the menu, use this fix.
To Do:
-------
- Add WVGA and QWVGA landscape screen sizes (users, please help)...
twolf thanks for your great hard work.
Before i try does it work with VGA devices.
wow this is GOOD Job
thanx TWolf for GREAT plugin
----Older versions----
Small update v1.5b:
-----------------------
- Fixed bug that never showed phone signal as 0% even if it was off.
- Fixed bug that didnt closed M2RW.EXE from the system, stealing over 600kb of ram.
- After receiving a new SMS now the Message2REG updates the SMS list every 10 seconds.
- Fixed small bug on the Settings that didnt restored the correct values (on non-WWE systems).
- To install, copy the attached files to the TWolf instalation folder and reset or use the Restart_TWolf script.
Whats new on v1.5:
-----------------------
- Fixed the 12-hour clock bug
- Added fix to automaticly change back to the default left button if you changed plugin without passing by the clock page.
- Fixed the AM-PM bug, thanks Gibbs.
- Added different OS languages install support.
- Updated the Multi Settings Editor to support this too.
- Removed update from first post.
Whats new on v1.4:
-----------------------
- Remade the icons, bars and clock skin for bigger sizes (VGA), I only noticed that they looked so bad when I saw a VGA printscrenn...
- Finally changed the network signal icon.
- Added alarms notifier. The icon is overplaced by the sms icon if you have any unread sms.
- Added dgaud007 storage card fix, for cards bigger than 2GB (thanks! ).
- Added color codes ... This allows for a better use, because it changes the left softkey button by page (all the buttons take about 1 second to update).
- Theres now a REFRESH left button on system page
- And a PREVIOUS left button on SMS page, the right button is now NEXT and the main button opens all SMS's.
- Also a PREVIOUS left button on photos page, the right button is now NEXT and the main button open the picture.
- Added more shortcuts.
- Added one shortcut to update the image list, in case you want to see a picture you just took. Since it lists files alphabetically, you probably need to press PREVIOUS to see it.
- Some code optimization.
- Was forced to remove the clock background option...too many images.
- Also had to remove the backup battery bar, come to think of it, it wasnt very usefull, since the phone had to be whithout battery for it to show other values than 100%...
- Added operator name to fill in the empty space, only optimized the centering of the text for qvga and wqvga portrait (its the only resolution I have)...
- Removed older versions from this post and moved the history changes to post #4 (I always forget to create a new thread with 2 or 3 reserved posts ).
Whats new in v1.3:
-------------------
- Fixed sms and phone path bugs.
- Added VGA portrait screen size from pablo96 (thank you )...
- Added option to Show/hide pages (in Settings > Advanced > Pages).
- Added a background option to the clock skins (its transparent on the default skin ).
- Added usefull shortcuts to the Start menu (refresh titanium, remove plugin, etc)
I checked the extra date request, but it could get sloppy... because, depending on your OS language, the letters could become a little on top of the minutes... :/
Whats new in v1.2:
-------------------
- Added two modes of viewing the date, european and american ( day/month/year or month/day/year)
- Added two modes of viewing the system values (megabytes or percentage)
- The Weather icon is now bigger on Page 1 (condensed icon is the same size).
- Changed links in the second page (system bars), now the main button goes to the Memory settings and the right softkey opens this Multi Plugin settings.
- Added the possibility of skins on icons, clock and bars, just create your own pngs in a new folder.
- Added Settings editor (you need Flash 7 to use it).
- Added in the APPS folder scrits to kill the TWolf script or to completly uninstall the plugin (script, folder, regkeys), you still need to remove it on the STAR > Settings > System > Remove... its just to help in case he doesnt want to go.
- Changed the way the pictures are listed, and added a script to delete the album.cache files.
- Removed old versions (the editor changes a lot of things).
- Added the missing T to the CAB file... (Didnt noTiced it was missing.)
NOTE: Everytime you reset your device, the script resets itself, loads your current settings, restarts the SMS viewer, refreshes the image list (this can take a while, depending on how many images are) and finally refreshes the plugin.
Everytime you save the settings, it does all this again.
Whats new in v1.1:
-------------------
- Added full date on page 1 and 12/24 clock view, configurable on the settings area of TWolf.mscr (open it with notepad).
- Changed the battery, charging battery and internal battery icons on page 2.
- Added some more tweaking on SMS reader on page 3.
- Added image viewer on page 4.
You need to configure the folder you want to see on the Settings.
Center or ENTER click goes to the next image and right softkey goes to the previous. It lists the images on first run (or every time you run TWolf\pics\Picture_list.mscr)
Please note that bigger images take longer to load.
Also, it loads ALL files, so if you have non-image files in there it will show a red cross in its behalf.
- Added weather temperature on condensed view.
- The icons image files are now on a separate folder.
- Uninstall old version, reset, install new version, reset.
hi twolf. great work brother
why do u use this value for sms?
Contact = RegRead("HKLM","Software\ThrottleLauncher\Messaging\SMS","Sender")
If we dont use throttlelauncher what shall we use here?
thats not being used at the moment, but the sms viewer from APBilbo saves the sms's there.
And that way that used the correct current sms to reply.
so erm... we wont be able to view sms if we dont have it installed or it doesnt matter?
All the necessary files are on the cab.
giorgosm said:
so erm... we wont be able to view sms if we dont have it installed or it doesnt matter?
Click to expand...
Click to collapse
twolf included this in cab, so no worries. I think there isn't landscape mode yet. But great plug in, keep it up
My weather icon isn't showing, it's just a white X (in a red circle )
+ Twolf, can you add to the Previous Message thing: If you're on the first message it should jump to the last message?
larbke666 said:
My weather icon isn't showing, it's just a white X (in a red circle )
+ Twolf, can you add to the Previous Message thing: If you're on the first message it should jump to the last message?
Click to expand...
Click to collapse
It pulls the icons from the weather plugin settings in the registry so it should work fine but I have noticed that the beyond icons look the best IMHO. I always install those icons and select them in the weather options.
Looking good twolf Everything so far is working for me. I do have a question on the clock. Is there anyway for it not to be military time? and also when its like say 8:15am can the zero before the 8 be taken away?
Just something minor but thought I would ask..
Also when viewing another panel is there a way to show the current temp next to the weather icon? I attached a screenshot so you know what I'm talkin bout. Last thing how hard would it be to include new email like you do for new txt on the main screen?
Keep up the good work man this is a sweet plugin
MrDSL said:
It pulls the icons from the weather plugin settings in the registry so it should work fine but I have noticed that the beyond icons look the best IMHO. I always install those icons and select them in the weather options.
Looking good twolf Everything so far is working for me. I do have a question on the clock. Is there anyway for it not to be military time? and also when its like say 8:15am can the zero before the 8 be taken away?
Just something minor but thought I would ask..
Also when viewing another panel is there a way to show the current temp next to the weather icon? I attached a screenshot so you know what I'm talkin bout. Keep up the good work man this is a sweet plugin :d
Click to expand...
Click to collapse
The Red X stays btw :s
larbke666 said:
The Red X stays btw :s
Click to expand...
Click to collapse
What do you have in registry setting
HKLM/Software\Microsoft\CHome\TitaniumWeather\Page1\CurrentIcon ?
there is no currenticons or something, just Icon which refers to an icon in the titaniumweather folder condicons icon 03.png
and in Twolf's registry it says nothing at the icons
Once again TWolf you've surpassed yourself and have come up with something beautiful for us QVGA users,thank you brother.
Twolf,
Congratulations on this great plugin. It looks beautiful from your screenshot, and I'm sure it will look good once I finish flashing my Kaiser and install it.
I'm moving on to a Diamond 2 in a few days time, and 6.5 is still not available for it. Going to miss all the wonderful 6.5 plugins.
Keep it up and hope you can make your plugin compatible to WVGA soon.
larbke666 said:
there is no currenticons or something, just Icon which refers to an icon in the titaniumweather folder condicons icon 03.png
and in Twolf's registry it says nothing at the icons
Click to expand...
Click to collapse
My problem is fixed, i had to change Twolf.mscr to read my reg key for the weathericon which was just Icon, and Text for the degrees.
Hi, awesone plugin Twolf, but how can make this the default plugin if I want to put this like third plugin?
Another question, I´m using the spil Icons, In condensed mode only show the upper half of the icon, how I can fix it?
Will be wonderful if you can put the degrees on side of weather in condensed mode, I hope the you can fix the 2gb issue for mortscript.
Regards
gregorysl said:
twolf included this in cab, so no worries. I think there isn't landscape mode yet. But great plug in, keep it up
Click to expand...
Click to collapse
Not yet, I was hoping the users could help me up with that...
larbke666 said:
Twolf, can you add to the Previous Message thing: If you're on the first message it should jump to the last message?
Click to expand...
Click to collapse
Good question, have to lear more about the MESSAGE2REG, I already asked APBilbo for help, waiting on him for more tests...
MrDSL said:
Looking good twolf Everything so far is working for me. I do have a question on the clock. Is there anyway for it not to be military time? and also when its like say 8:15am can the zero before the 8 be taken away?
Just something minor but thought I would ask..
Also when viewing another panel is there a way to show the current temp next to the weather icon? I attached a screenshot so you know what I'm talkin bout. Last thing how hard would it be to include new email like you do for new txt on the main screen?
Keep up the good work man this is a sweet plugin
Click to expand...
Click to collapse
Will be on my to-do list.
larbke666 said:
My problem is fixed, i had to change Twolf.mscr to read my reg key for the weathericon which was just Icon, and Text for the degrees.
Click to expand...
Click to collapse
Strange, Im glad you figured it out, but just for curiosity, what weather version do you have?
ryomahino said:
Hi, awesone plugin Twolf, but how can make this the default plugin if I want to put this like third plugin?
Another question, I´m using the spil Icons, In condensed mode only show the upper half of the icon, how I can fix it?
Will be wonderful if you can put the degrees on side of weather in condensed mode, I hope the you can fix the 2gb issue for mortscript.
Regards
Click to expand...
Click to collapse
Use Titanizer or Chome editor.
Yes, the weather temperature can be there too, plenty of space, the 2GB size issue Im still not sure how to do... :/
Test of the image viewer page:
Add this to the CPR before the condensed area (if you dont know how, its best if you dont do it at all, wait for the next version)
Code:
<!-- Large picture in Center -->
- <Image ID="big_image" Left="20" Top="-60" Width="200" Height="200" ScaleStyle="Fit">
<Layer ID="Border" Color="0xffffff" Left="17" Top="-103" Width="206" Height="206" />
</Image>
<Text ID="image_counter" Left="100" Top="95" Width="50" Height="34" FontFamily="Tahoma" FontSize="10" FontStyle="Regular" Wrap="False" VerticalAlignment="Center" HorizontalAlignment="Center" Trimming="EllipsisCharacter" InnerTextType="Resource" Text="cmhomeres.dll,1025">
<TextStage TextOffsetType="TextOffsetDropBottomRight" Color="#00000000" TextOffset="1" BlurFactor="3" Alpha="1.0" />
<TextStage TextOffsetType="TextOffsetNone" Color="#FFFFFFFF" />
</Text>
Add the zipped files to the TWolf folder and restart.
Take in mind that it it creates a fresh list of the pics files in the folder you chose in the settings (TWolf.mscr) and refreshes the SMS's too.
Bigger images take more time to load.
Center click (or ENTER) for next pic, right bt for previous.
Enjoy.

[APP][WM 6.5.x] Taskbar Launcher - DEVELOPMENT & SUPPORT STOPPED!! (June 2010)

DEVELOPMENT STOPPED!
In case anyone still bothered - sorry! But I'm personally not even using TBL anymore because in the meanwhile Cookie's Sense mod does everything I need. Due to Windows mobile platform dying I also see no reason to continue anyway!
This is my first contribution to this board! It's a little tool that shows a customizeable launch pad when you hit the taskbar. If you don't like this launch pad you can also launch something else instead. You can also say to launch nothing at all --> this also disables HTC Notification, Samsung notification if you're on OMNIA, or the annoying taskbar from newer 6.5.x builds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Attention: Current version is designed for newer 6.5.x builds of Windows Mobile with the start menu on bottom. Taskbar Launcher is blocking all other applications from the taskbar, so it might be a bad idea to use it when your Start menu is still on top.
Release history
0.6 BETA [02/28/2010]
support alpha PNGs
PNGs from custom commands are automatically detected from entry in Start menu etc.
internal commands can be launched using command line parameters
Yellow indication when Wifi connection is open
temporarily disabled highlighted icons when hitting them
Manila, Phone, Start menu, Home screen and Active Sync is excluded in task manager
Still possible to switch to home screen/start menu when using prev/next gestures
immediately update taskbar when status of battery/connection has changed or when waking up from sleep
removed $HTCVOLUME control because it wasn't reliable. Use seperate exe I had posted if you still need it
added autoclose feature
new icon set + application icon for TBL
0.5.1 BETA [02/22/2010]
tried to fix crash on Close introduced with 0.5 [maybe]
Added command $HTCVOLUME (but probably not working on newer 6.5.x builds)
0.5 BETA [02/19/2010]
Added Task manager
Added new gestures: switch to next/previous application
Fully replace the default Windows taskbar
0.4 BETA [02/08/2010] (1031 downloads)
Fixed bug: Taskbar launcher showed instead of HTC Volume Control (tested on Touch Diamond)
Fixed bug: Selected icons stayed selected when moving out of the icon
Taskbar is split up into 3 areas, each of them can launch something (see INI file)
Supported commands: switch to Start menu, switch to Manila
Added $ROTATELEFTBACK and $ROTATERIGHTBACK
Added switch to deactive Taskbar launcher (workaround if "Stop Taskbar launcher" leads to problems....)
Finally there's link in Startmenu to Taskbar launcher (configuration tool automatically starts Taskbar launcher when finished)
More options in popup menu (see screenshot)
Added first-stage configuration GUI (see other screenshot)
0.3 BETA [02/03/2010] (366 downloads)
Improved performance of launcher dropdown
Improved gesture recognition
Launcher window position was messed up on some resolutions --> Fixed!
Gestures can be turned on/off and it's possible to launch custom cmds
Rotate screen can also be called from launcher
Possible to launch htc notification through gesture or from launcher
When hitting icons in the launcher they become highlighted
0.2 BETA [01/27/2010] (243 downloads)
Added support for all resolutions
Added support for landscape mode
With a finger gesture over the taskbar the device rotates in the specified direction (you can slide left to right, or right to left)
The ugly "Close" button is gone. The launcher can be closed by just hitting the taskbar again
A parameter can be setup for each command
Added few more commands because I thought they're fun
0.1 BETA [01/22/2010] (518 downloads)
Initial release
Installation
Run the CAB file on your phone. All files are copied into program files directory. There's also a shortcut installed in \Windows\Startup to automatically launch it after reboot. After installation the Taskbar Launcher is not yet running. But since BETA 0.4 there's now also a shortcut in Startmenu/Programs to launch the configuration tool. When finished then it will automatically run Taskbar Launcher.
Usage
Hit the taskbar and then the icon of the program you want to launch. Hit the taskbar again or tap anywhere out of the launcher window to close it. You can also tap and hold anywhere in the window and a little popup menu appears. Here you can stop Taskbar launcher.
Since BETA 0.4 the taskbar is divided into three parts. By default settings hitting in the middle of taskbar shows the Taskbar launcher like previously known. Hitting on the left runs HTC Notification. Hitting on the right runs Taskbar launcher's internal Task Manager.
If enabled, then with a gesture the screen can be rotated. Slide from left to right to rotate counter-wise, slide from right to left to rotate in the other direction. Of course this works also when the launcher popup is still hidden.
Since beta 0.5 the gestures to switch application are used by default. Slide from right to left to switch to next application, slide from left to right to switch to previous application.
In beta 0.5 I have also fully replaced the standard taskbar. In the middle you see the time. Left is indication about signal strength, right is indication about battery level. If a GRPS connection is open then the icon in the very left changes to a RED circle. If a WIFI connection is open then the icon changes to YELLOW. The battery icon in the very right changes, depending whether you have connected your phone to power supply or not.
Customization
In [General] section you can active/deactive Taskbar launcher. When deactivated then the program is still running in the background, but taskbar remains as usual. There's also a value to edit the timeout after which the taskbar launcher window automatically closes if user doesn't do anything. Default = 5 = 5 seconds.
Next comes section for taskbar replacement. By default this is enabled, the ini file key is Style = 1. To disable it and use the default Windows taskbar simply set Style = 0. There's few more keys which point to images which indicate current battery/connection state.
Then there are three sections for each part of the taskbar: Area1, Area2, Area3. For each area you can setup the following:
Launch mode. There are 4 modes:
0 --> nothing happens when you hit the task bar
1 --> enable the customizeable launch pad
2 --> when hitting the taskbar then launch something else
3 --> show the taskbar's launcher internal task manager
LaunchExe and LaunchParam is executed if LaunchMode is 2.
Since beta 0.6 searches the icon for the exe automatically. usually the icon seen in Start menu should be shown. If you want to have another icon (or have some custom things like HTC Notification) then you still can specify a PNG file.
In [CustomLauncher] section you can change the image used for background picture. The file is supposed to be the relative path to the program file directory. Don't add absolute paths. Currently you can't add path to a file in \Windows directory.
In [CustomTaskman] you can set a background image. There's also a key "NoIcon=..." which points to an image that is shown if Task manager was unable to retrieve the icon for an application. Usually this shouldn't happen. If you see this icon, please report!!!
In [CustomCmds] you add the list of tools you need. Always increment the ID by 1. In the section for each tool you add a PNG file used as icon (relative paths again), executable file (absolute path) and an optional parameter. You can also leave out the PNG file then the default (also shown in Windows Start menu) will be used.
Some of the INI file settings are immediately applied by Taskbar launcher, for example when changing Active setting or any of the run modes. However when changing shortcuts in the launcher window or when modifying any of the PNG files then you have to restart Taskbar Launcher.
Internal commands
Some people might already have noticed, instead of exe files you can also add some commands which are internally processed by TBL. The following commands are available:
$ROTATELEFT --> rotate screen left for 90 degrees
$ROTATERIGHT --> rotate screen right for 90 degrees
$ROTATELEFTBACK --> rotate screen left into landscape, by next call return to previous portrait mode
$ROTATERIGHTBACK --> rotate screen right into landscape, by next call return to previous portrait mode
$HTCNOTIFICATION --> launch HTC notification window
$HOME --> switch to home screen (i.e. Titanium or Manila)
$MANILA --> switch to Manila and select "Home" page
$STARTMENU --> show Window's start menu
$SWITCHTONEXTAPP --> switch to next app
$SWITCHTOPREVAPP --> switch to previous app
Since beta 0.6 it's also possible to use any of these commands as command line parameters. i.e.:
tbl.exe $HTCNOTIFICATION
This can be launched any time, no matter if tbl.exe is already running.
Future plans
Add/remove/edit the programs in the launch pad directly from the application.
Add more functionality into configuration GUI
Add possibility to close apps from Task manager
nice app.
great app. hope this helps get the word out for you: http://www.fuzemobility.com/add-a-program-quick-launch-to-your-taskbar/
Do you know the location of HTC Notification? I'd like to still access it if needed but I don't see it in \Windows but I'll keep looking
hey this is great but i wish ya can make this a task manager specailly if ya can add it into default winmo taskbar itll be great
great!
Very nice.
would be fantastic to have a task manager with that method
Hi!
This is a perfect opportunity to reincarnate a useful feature that Microsoft have abandoned: The recently launched apps found on top of start-menu in WM6.1 but ditched in WM6.5
I find "recently launched apps" more useful than taskman.
I think WM6.5.3 status-bar by default pops large notification icons when you tap it. Your great program can be positioned under it rather than replacing it.
cheers!
bugsykoosh said:
great app. hope this helps get the word out for you: http://www.fuzemobility.com/add-a-program-quick-launch-to-your-taskbar/
Do you know the location of HTC Notification? I'd like to still access it if needed but I don't see it in \Windows but I'll keep looking
Click to expand...
Click to collapse
thanks a lot for your support! Highly appreciated!!!
HTC Notification is running as a service, so you can't just call it to launch the window. One has to find a way to trigger the service to show the window. Maybe it's enough to just send a command to the HTC notification window? I try to check it...
shaffaf said:
hey this is great but i wish ya can make this a task manager specailly if ya can add it into default winmo taskbar itll be great
Click to expand...
Click to collapse
you mean to only start it when hitting taskbar on the top/right position? This will be possible with next version. Then you can say on which part of the taskbar it will run from.
Eraser85 said:
would be fantastic to have a task manager with that method
Click to expand...
Click to collapse
You can just add your favourite task manager to launch instead. It's just a simple setting in INI file.
BoyBawang2 said:
I think WM6.5.3 status-bar by default pops large notification icons when you tap it. Your great program can be positioned under it rather than replacing it.
Click to expand...
Click to collapse
I can add support for this in the next release. Maybe it's sufficient to say if you want to overwrite the default notification icons or not. And with another setting you could customize the position of the Taskbar Launcher window. The problem might only be that this is resolution dependent so you need a setting for each resolution....
I would love to see a taskmanager in that space, where you can easily switch between apps and close them
Very nice app! Thanx a lot.
@OP i like this app but i was wondering if there is a way to add the magnify option that comes with the default. Thanks
Eraser85 said:
would be fantastic to have a task manager with that method
Click to expand...
Click to collapse
There is one, try ArkSwitch.
claus1953 said:
There is one, try ArkSwitch.
Click to expand...
Click to collapse
Yes ArkSwitch works perfectly - have been using it for sometime - try it guys
@ RAMMANN - Any chance of a QVGA version in the future please?
aussie_boi said:
Yes ArkSwitch works perfectly - have been using it for sometime - try it guys
@ RAMMANN - Any chance of a QVGA version in the future please?
Click to expand...
Click to collapse
The next version will support all screen sizes. The icons will be automatically scaled down when running on smaller resolutions and through an ini file setting you can change size by yourself if you need bigger or smaller icons. I'm currently testing on Samsung Omnia which got a 240x400 screen.
RAMMANN said:
The next version will support all screen sizes. The icons will be automatically scaled down when running on smaller resolutions and through an ini file setting you can change size by yourself if you need bigger or smaller icons. I'm currently testing on Samsung Omnia which got a 240x400 screen.
Click to expand...
Click to collapse
Wow, great news. Thanks for the update
a taskmanager w/ that look would be great!
Create link to the HTC Home Screen
I installed the "Taskbar Launcher" and it is great. I am customizing the launch pad and I created a link to access memory by creating a link file (20#ctlpnl cplmain.cpl,4). However, I am still unable to create a link to the HTC Home Tab 0. I tried this link: 23#ctlpnl cplmain.cpl,13,0, but it doesn't work. Could you help me with the link file that I should use. Thanks in advance.
Schzam said:
I installed the "Taskbar Launcher" and it is great. I am customizing the launch pad and I created a link to access memory by creating a link file (20#ctlpnl cplmain.cpl,4). However, I am still unable to create a link to the HTC Home Tab 0. I tried this link: 23#ctlpnl cplmain.cpl,13,0, but it doesn't work. Could you help me with the link file that I should use. Thanks in advance.
Click to expand...
Click to collapse
does it work when directly running the lnk file? if yes, be sure you describe the full path to the link in the tbl.ini file.
In the next version you can also specify parameters for each comands. I just tried and added "Memory" by directly calling the ctlpnl cplmain.cpl,4 (without .lnk file) and it's working.
HTC Sense Home Tab 0
Thank you for your prompt response. I tried the "Memory" command and it works. I think that my command for the " HTC Sense Home Tab 0" is incorrect. Do you know the command I should be using. Thanks.

[APP]CHT Tweaks [BETA][SENSE 2.5]

CHT Tweaks BETA
Only for Co0kie Home Tab 2.0.0
CHANGE FONT TEXT DIRECTLY TO CHT.2.0.0
USE PNG FILES DIRECTLY TO CHT.2.0.0
new! PIE CONTROL FOR SENSE
new!ONE CLICK TO HIDE THE TASKBAR
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pie control here & into v100beta​
I continue experimenting with Co0kie Home Tab 2.0.0. Mainly CHTtweaks allow to change textures in .png format using the file explorer and give the option to easily change the text font for all CHT elements independently. Aditionally CHTtweaks uses great tool JMLMenuSense to make a setting menu.
CHTtweaks brings major changes as the original files of CHT.2.0.0 lua & mode9 are modified. I am also providing the open source where the changes are marked (--CHTtweaks) in the files as explanation. Feel free to use, modify, edit, mirror, sale, delete or whatever you want to do with this, but always with fun
For security also I am providing the original CHT files to restore if necessary. Just copy all files from insode the zip to windows folder, acept overwrite & restart Sense.
The files with changes are the followings:
5950B2CD_manila -- Co0kieNotifyBar.lua ==> added a 3rd layout for text missed calls - sms - emails - voicemail notification, Configurable: text font, size, color, alignment, language, displayed text
5fa4d4b7_manila -- homedigitalclock.lua ==> chose png texture for numbers, colon & background; switch for transparent flipclock-tabs; switch for get out of the midle flipclock line.
4B558519_manila -- CHT_Widgets.lua ==> selectable opacity for home clock background; added 4th layout to textclock: alarm icon only; added 3rd layout text notifications
1EC5924B_manila -- homeAnalogClock.lua ==> chose png texture for analog clock face, hourhand, minutehand & secondshand
new!2AFAFEFA_manila -- CHT_Softkeys.lua ==> chose png texture for the softkeys background; switch for transparent softkeys & softkeys background; switch to dissable the enlargement softkey icon when pressed, work done by devil-strike based on the script of rat_2665 (all credits for them please). Extended CHT menu. Hide taskbar new!
29C5E347_manila -- Co0kieEmail.lua ==> chose png texture for CHT email background independently of Email Sense Tab; change text font
7ECB5997_manila -- Co0kieMessages.lua ==> chose png texture for CHT SMS background; change text font
4956014B_manila -- CHT_Lockscreen.lua ==> chose png texture for the slider unlocker of each CHT lockscreen (Manila, Windows, Mini HD)
6A5D6A2D_manila -- Co0kieMusicPlayer.lua ==> switch transparent CHT music player background; change text font; change background
45E83959_manila -- CHT_Titlebar.lua ==> switch transparent home title bar; set color for other Sense Tab titles (excepting Music Sense Tab & Internet Sense Tab); change text font; switch page indicators to botton screen
5146EC01_manila -- Co0kieAppointments.lua, 45D3F17C_manila -- Co0kieListControl.lua & 094C0231_manila -- Co0kieAppointments.mode9==> switch transparent background for CHT appointment, horizontal alignment & change text font
3ACCF880_manila -- CHT_QuickLinks.lua==> change text font for quicklinks labels; change quiklinks frames
58B6C4C5_manila -- CHT_FreeLinks.lua==> change text font for freelinks labels; change freelinks frames
346BA8F0_manila -- Co0kieTextClock.lua==> change text font for the clock, date & alarm bar widget
6639bcc4_manila -- weatherforhome.lua==> change text font for weather info for home.
6DB6511F_manila -- CHT_Constants.lua==> dock size up to 120px
new! 285d005a_manila -- manila.lua & 3a8e04af_manila -- manila.mode9==> pie control in all sense tabs
CHTtweaks does also add some settings that use to be done in CHTEditor, now you can also do it in CHTtweaks, like disable double flip or minute flip; show seconds hand; set softkey height & menu height; set color for CHT Email text & CHT SMS text; select lockscreen style (0= Manila; 1= Windows; 2= HD Mini)
To restore default manila texture just leave the texture path in blank and restart Sense. CHTtweaks is provided without png textures because it was making so big. I have uploaded a pack CHTtweaks_PNGtextures.rar with some examples, just unpack it in the SD\CHTtweaks folder and select your favorite, delete, add new textures ... and share them with us! I havent done any of this nice graphics. I am taking graphics from NordPolCamper, MrBeO, LNando84, Santod040, [email protected], _leciel_, S-Droid, Sternas & ericv99. Thank you so much for them! Special thanks to LNando84 for all the good work and help with the setting menu.
Installation:
CHT2.0.0 needs to be installed previously.
Switch Off Sense.
uninstall any previous version, acept soft-resset.
Install CHTtweaks.v0.97.cab in device, accept soft-resset.
Install JMLMenuSense 1.60 or higher in device, only in case you allready have not installed for other widgets (v1.75 not working)
Extract CHTtweaks_PNGtextures.rar in device or SD, I use to do it in \Storage Card\CHTtweaks
Switch Sense On
Find CHTtweaks in Start Menu\Programs & CHT menu.
You can uninstall CHTtweaks.v0.97.beta.cab. If you have any problem after deinstallation use restore.CHT.original.zip, just copy the original files from inside the rar to windows folder, acept overwrite and do restart Sense.
Also you can restore independently any modified file of CHT and the rest will continue working. I mean if you like the way of changing the CHT Email background but nothing else, just restore all the files excepting 29C5E347_manila. CHTtweaks will continue working only with this feature.
NEW! ONE CLICK TO HIDE TASKBAR NEW!
Just copy the file into the zip to windows folder and accept overwrite and restart Sense
LOCKSCREEN
​
CHTtweaks.097.beta contains ICS lockscreen for CHT2.0. This lockscreen substitute CHT Windows lockscreen. It is made by 3 .png files: ICSlockscreen.png (256x256) for the slider; ICSlockscreen2.png (256x256) for the slider pressed; ICSlockscreenBG.png (512x512) for the lockscreen background. Of course you can change this graphics as usual in CHTtweaks, just go to lockscreen menu and select textures from internal memory or SD (to get default graphic just leave it blank. You can also select the application to launch by unlocking in left slide. As most of the CHTtweaks you can use this ICS lockscreen independently of CHTtweaks.
The others lockscreens (manila & HDmini style) can also be customized with CHttweaks.
MIUI LOCKSCREEN
***download***
SENSE 3.0 LOCKSCREEN
***download***
TEXT NOTIFICATIONS
Configurable: text font, size, color, alignment, language, displayed text
TEXT FONTS
APPOINTMENTS
Tip: Go to HKCU\Software\HTC\Manila\CHT.Tweaks.TransparentHomeAgenda and set the opacity value for the agenda from 1 to 100 (50, 33, etc)
SOFTKEYS
Just a few clicks and you can change easily the softkeys. Also I added the option to disable the softkeys icon enlarge when pressed, accordingly to the work done here by devil-strike based on the script of rat_2665
CHTtweaks includes the option to have transparent softkeys background in one click. All this changes in softkeys needs re-start Sense. Also includes the file restore.CHT.original.rar in case you want to uninstall this cab, just copy the files inside the rar into \windows and restart sense.
Special thanks to lnando84 for the tests and the work in the setting menu and all Dream Team for the nice graphics.
Tip: I am uploading a few transparent softkeys icons very useful to play a bit with this softkeys backgrounds textures. Enjoy!
Tons of Softkey bars (Docks) uploaded in this post and followings. Thankyou very much ezzie (& Nando)
EMAIL & SMS
in this post and followings ezzie has uploaded a lot of graphics for SMS & Email ready to use wth CHTtweaks. Thanks a lot!
HOMECLOCK
Thanks to the amazing work of Dunc001 in SimClock a lot of new possibilties are comming to the world of CHTwidgets. CHTtweaks add the feature to easily change the texture of some elements of the homeclock using png files.
Just open CHTtweaks menu setting (CHTquicklink / CHTfreelink >> miscellaneous) go to home clock setting and use the file explorer to find your favourite texture for the home analog clock, the numbers of the home flipclock and the colon (two dots). Also select the font text for the weather info & text clock. You can always restore the defeult textures just deleting the texture path and restarting sense
EDIT: With so many changes of home analog clock may be useful this set of clock hands good for any light-dark clockface
Thanks to Lnando84 you can find here (and followings posts) lots of clocks in png format, ready to use with CHTtweaks!
A few clocks, softkeys, Lockscreens, etc to enjoy with CHTtweaks. Unzip in SD card and select it with CHTtweaks:
CHTtweaksPNG
STILL BETA STAGE, FEEDBACK AND SUGESTIONS IS MUCH APRECIATED
Some adapted themes: (here more adapted themes by cocopuf)
https://plus.google.com/u/1/photos/106797872708479667834/albums/5947715799326302689?sort=1
Here is the kitchen. In the folder \workspace\lua there are all the files decompiled and commented, the modified code is marked with --CHTtweaks where is changed from the original. It also has been modified the mode9 file 094C0231_manila, it was necessary for the appointments transparency. You can run it without devMode (_Deploy_to_device_normal_mode.bat). All credits & thanks to Co0kie Monster.
Also uploaded the source and kitchen of most of my widgets including CHTtweaks:
Poy_fullKitchen.zip - 49.19 MB
HOW IT WORKS?
Uploaded with ImageShack.us
CHTtweaks 0.93.beta introduces small modifications in the lua files of Co0kie Home Tab 2.0.0 which makes that some properties of a few elements (homeclock, lockscreen unlocker, email background, etc) can be set in the registry HKCU\Software\HTC\Manila\CHT.Tweaks.XXXX. This changes are compatible with any other widget or standar CHT skin: if there is no CHTtweak registry setting the default texture will be used.
Attaching the source of all modified files in which has been included the marks --CHTtweak for easy indentification. As example the code below say to CHT to use the png file for the home analog clock -defined previously by CHTtweaks setting menu, but if it does not exist it will use the default manila file
--#####Set texture for home analog clock by CHT Tweaks
SetTextureHomeAnalogClock= function ()
poyTweaks_HomeAnalogClock_texture_path = GetCHTSettingString("Tweaks.HomeAnalogTexture", "\\windows\\htc\\Home\\Assets\\Images\\Home\\VGA\\AnalogClock_bg.qtc")
analogclock:SetTexture(poyTweaks_HomeAnalogClock_texture_path)
end
SetTextureHomeAnalogClock ()
_application.Store:GetValueChangedEvent(Lifetime_Permanent, "CHT.Tweaks.HomeAnalogTexture"):connect(SetTextureHomeAnalogClock)
--#################################
Click to expand...
Click to collapse
CHTtweaks Setting Menu configure the registry, then this configuration is applied to CHT
And never forget Co0kie's words specially where is said " ... The source code is freely available. You may modify it as you wish, but I do have a request:
If you're going to post a CHT modification publicly, post only the modified files and not the whole thing, so that the installation procedure is:
1) Install the main CHT cab first.
2) Install your modification.
Alternatively, if you want to use any part of this source code in your own independent manila project, you are free to do so, but please do post a mention that you're using this code and what parts.
That's the only thing I ask. I hope everyone will honour it. Thanks, here's the source, have fun with it."
Thanks again Co0kieMonster
CHTtweaks 1.8.5
(available beta 2)​
At first BIG THANKS TO CO0KIE MASTER its amazing how he has converted a static home tab into a flexible and very customizable home tab. Every time I look a bit into the source files I get impressed what Co0kie has done. Not only the CHT itself, but also the source is free and available for use and enjoyment.
With this development I try to bring some of the advantages of CHTweaks to CHT1.8.5's friends. So I have started with the analog and flip clock (basic CHTwidget) and CHTtweaks can change the elements of the analog clock -face & hands- using textures in PNG format stored in any folder of device or SD. In the standard flip clock can be changed the numbers (always in PNG format) and add 2 dots between hours and minutes. Also clock background can be changed using textures in PNG format and set opacity from 1=transparent to 100. Aditionaly has been added some work i the Home Title Bar (transparency). Further development depends on comments and sugestions.
Installation
1. Install CHT 1.8.5 (& rest of the components)
2. Install CHTtweaks 1.8.5.betaXX.cab, softresset
3. Aditionally I recommend to install JMLMenuSense v1.60 (or higher) for access to setting menu
4. Access to configuration menu in \start menu\programs
5. Get lots of textures in PNG format here and everywhere in XDA
**DOWNLOAD HERE**
Attaching the kitchen. The source with the modified files are in folder \workspace\_lua\. Everybody is free to add features, correct bugs, edit files, delete them, change, sale, mirror, or whatever want to do with them. Use is not compulsory. CHTtweaks1.8.5 works fine in my HD2(WM6.5.x) with CHT1.8.5 installed, but if it does not work in your device I will help as much as I can.
If you want to try the kitchen*, do the changes in the lua files with notepad2 (inlcuded in tools folder) then run _Deploy_to_device_normal_mode.bat and the files will be recompiled and deployed to your device fro test. Once the changes are done, just run _Generate_files_for_cab.bat and will get the files ready for the cab in folder \cab\_files_final\
* at first the device must be synchronized with PC and run z_init.bat only once at the beginning.
CHTtweaks 1.8.5 includes Typoclock​
A reduced version of Typoclock has been added as layout in standard textclock. This reduced typoclock has time, date and alarm icon, and can be configured in CHTtweaks 1.8.5 setting menu (or directly in registry HKLM\Software\HTC\Manila\CHT.Tweaks.XXX). It can be changed: text font for time and date; color; text sizes; vertical position; horizontal alignment (left, center, right); hide alarm icon; alarm icon position.
To activate Typoclcok on CHT 1.8.5 install CHTtweaks, go to menu > edit home layout > select level > Advanced > show text clock > typoclock; for configuration just go to CHTtweaks setting menu (start menu\programs) > typoclock > set your favorite parameters.
Click to expand...
Click to collapse
[beta2] includes new layout in classic CHT clock for stand alone weather; control over the text font in weather info for home; and lockscreen textures in PNG format
Click to expand...
Click to collapse
Addon for CHT
Hola, looks and works very good
Great job and lot´s of work and thinking behind it. Congratulations amigo.
It works on both of my devices HD2 & HD Mini, much better than expected
For beeing a beta, I´d say it´s rather a "release candidate"
Hi Poy,
WOW !!!
What a great job amigo mio, this is really another huge step to a higher level in WM and CHT Widgets.
If all this great things continue growing at this pace we will soon see a massive immigration coming from the dark OS sides
Once again amigo, Big Thanks for sharing your amazing work
OMG OMG OMG......
I may have to leave "sick" to get home and apply this.....does tweakideation sound like a legit diesese?
Hi again Maestro,
I wondering if you have installed the Dunc"s CHT Fix40 Slots-Widgets you posted here and could you please check in your registry to see if it is shown 40 or 20, I just installed this fix but in my registry it still show 20 slot, is this right?
Thanks in advance, amigo
[email protected] said:
Hi again Maestro,
I wondering if you have installed the Dunc"s CHT Fix40 Slots-Widgets you posted here and could you please check in your registry to see if it is shown 40 or 20, I just installed this fix but in my registry it still show 20 slot, is this right?
Thanks in advance, amigo
Click to expand...
Click to collapse
I really do not know what cab i have installed so many test ... but for sure is Dunc's CHT fix 40 widgets. Dunc's mod of mike2nl's CHT fix 40 widgets is not included in CHT Tweaks v0.90. Its linked to this post: http://forum.xda-developers.com/showpost.php?p=12016868&postcount=24
I thinks that Dunc's mod of mike2nl's CHT fix 40 widgets should be standar nowdays, it should be added to CHT2.0.1 (or eventually to CHT Service Pack 1). This fix allows 40 widgets and reserve 8 slots for BG widgets. If you don't have 40 slots in the registry just add it: HKCU\Software\HTC\Manila\CHTI.AddonWidgets.Count = 40
CHT Tweaks its just a protection to avoid overwrite the file home.mode9 when themers are working on home flip clock to convert it to digital clock with 2 dots & no flip line. Now you can get this mod without touching this fixed file. Something similar happends with CHT_rat_weather_library, with CHT Tweaks I am trying to protect this valious file to be overwritten.
Thanks for your fast reply Maestro.
I understood perfectly amigo, so I going to change the value 20 to 40 in the registry and I hope when I get my 21' widget everything goes ok
I just installed the 40 fix now because I know that amazing widgets are coming soon
Thanks again Amigo.
please give me stick note (hola) widget! Thanks
you'll find it here: http://forum.xda-developers.com/showthread.php?t=965868&page=3
in cab folder into the .rar
CHT Fundamental Questions
poyensa said:
....
I thinks that Dunc's CHT fix 40 widgets should be standar nowdays, it should be added to CHT2.0.1 (or eventually to CHT Service Pack 1). This fix allows 40 widgets and reserve 8 slots for BG widgets. If you don't have 40 slots in the registry just add it: HKCU\Software\HTC\Manila\CHTI.AddonWidgets.Count = 40
CHT Tweaks its just a protection to avoid overwrite the file home.mode9 when themers are working on home flip clock to convert it to digital clock with 2 dots & no flip line. Now you can get this mod without touching this fixed file. Something similar happends with CHT_rat_weather_library, with CHT Tweaks I am trying to protect this valious file to be overwritten.
Click to expand...
Click to collapse
Now we´re getting to one of the main questions or issues since so many addon widgets and Cookie´s kitchen have been released. We are indeed loosing our "base2 or let´s say, "common ground"....
Guess we need a "Base Definition" in order to avoid future probs with "crucial" files in order to keep ONE basic CHT version & vision. I also think it is IMPERATIVE and every mod of this kind should always post a detailled list of the included and modded files, and maybe even provide the o files in case of probs. See notes and issues when uninstalling one of these files or widgets.
I´m not sure about a Service Pack... I would rather say this requires a new release, so all that´s been done up to now should be compatible with CHT 2.0 and all that´s beeing done in the future, based on your findings and Dunc´s SK-i Theme (and the evolutions for CHT within it) as well as from other CHT Members and users. Call it maybe CHT 2.5, or CHT 3.0 because it´s not a "minor update" like a bug fix or some addons. We´re talking about fundamental changes in CHT
Maybe this could be discussed with users and devs in actual CHT thread, or even a new thread? I´m asking this, because like with the update and new release of CHT 2.0, there are quite still a lot of CHT users that prefer older version (CHT 1.8.5.1) and have decided not to change. I guess there will be also enough that might want to stick to "unchanged" 2.0 instead of having to worry that new widgets need new mods on crucial files like home.mode9, etc...
Skinning mods of image files is one thing, as well as tweaking or partially modding mode9 files for fontsize, color, etc..., but mayor changes affecting luas, or other items in mode9 should be done very carefully, especially considering the fact, that this files and changes call upon a lot of other files, and this can really screw your Sense
Interesting and unique mod to CHT. I will try this, and post comments later! Thanks for sharing...
poyensa said:
...
CHT Tweaks its just a protection to avoid overwrite the file home.mode9 when themers are working on home flip clock to convert it to digital clock with 2 dots & no flip line. Now you can get this mod without touching this fixed file. Something similar happends with CHT_rat_weather_library, with CHT Tweaks I am trying to protect this valious file to be overwritten.
Click to expand...
Click to collapse
BHS Interceptor said:
... I also think it is IMPERATIVE and every mod of this kind should always post a detailled list of the included and modded files, and maybe even provide the o files in case of probs. See notes and issues when uninstalling one of these files or widgets.
.... I guess there will be also enough that might want to stick to "unchanged" 2.0 instead of having to worry that new widgets need new mods on crucial files like home.mode9, etc...
Skinning mods of image files is one thing, as well as tweaking or partially modding mode9 files for fontsize, color, etc..., but mayor changes affecting luas, or other items in mode9 should be done very carefully, especially considering the fact, that this files and changes call upon a lot of other files, and this can really screw your Sense
Click to expand...
Click to collapse
Yes, it´s me again After a few extensive tests, I do insist that a "File List" is imperative for not having to BAN overwriting or modding files that are crucial to the system and Sense. I´ve been switching mode9´s and Luas with CHTS now, and if you do it right, there will be no issues, but you need to know the files that are changed BEFORE installing the widgets or mods, so you can back them up before damage is done. The xmls included in all widgets, AND HERE IN THE PAST THERE HAVE BEEN A LOT THAT WHERE NOT WRITTEN PROPERLY AND THUS UNUSEFULL AND DANGEROUS, have to be checked and approved, otherwise they will be no good. CHTS can help overcome these problems if used properly. CHTS can save those crucial files before install to a save profile, and then you can use any file in another profile and so switch safely back and forth. But CHTS needs to know these files before install in order to back up / save the original ones
I have been able to switch from a Profile configured with rat´s changed home.mode9 file (his weather library needed for his last widgets) to another profile using the original (well, not original since CoOkie also modified the same file for CHT - so there is an Original file, then the CHT file and now the modded CHT files for that) CHT home.mode9 file and everything went fine. But still the manila/sense versions need to bee watched, since not all mode9 are version independent
Very nice useage of JMLMenuSense!
Sadly I cannot use Manila on my phone (too slow for normal use) - But indeed very useful!
Congratulations!
GreeZ!
Freezy1982
Guys, i have read that Dunc has made a 40 widget fix for CHT. So far i can remember about that issue... i have done this fix and others, in team work of BHS and me before x-mas and i have published this in the CHT Artworkgroup as a beta testing issue.
Dunc please tell me why you have realeased this fix before we have done our intesive tests of this release is ok.
Hi again Mike, I dont see any controversy there. We are recommending to use Dunc`s verssion for the the CHT fix 40 slots -widgets, because it also has been altered to allow the use of 7 backgrounds widgets, as impleted in Blue Sk-i theme or CHT Walls. We all recognise your work and credits have been properly granted. Dont waste your time and energy on that, we have still a lot of work to do
mike2nl said:
Guys, i have read that Dunc has made a 40 widget fix for CHT. So far i can remember about that issue... i have done this fix and others, in team work of BHS and me before x-mas and i have published this in the CHT Artworkgroup as a beta testing issue.
Dunc please tell me why you have realeased this fix before we have done our intesive tests of this release is ok.
Click to expand...
Click to collapse
poyensa said:
Hi again Mike, I dont see any controversy there. We are recommending to use Dunc`s verssion for the the CHT fix 40 slots -widgets, because it also has been altered to allow the use of 7 backgrounds widgets, as impleted in Blue Sk-i theme or CHT Walls. We all recognise your work and credits have been properly granted. Dont waste your time and energy on that, we have still a lot of work to do
Click to expand...
Click to collapse
Hola again, Mike and Poy, yes it´s true that Mike worked on that widget fix and it´s not about beeing mentioned, but about possible issues and misunderstandings about this particular and specific fix for Dunc´s SK-i Theme and CHT in general...
"The attached zip folder contains seven background widget cabs which will install the backgrounds you see used in the screenshots. You can choose to install any number of these and after you have installed them you can easily edit them using the reg changes and new images. However to get them to appear behind everything else on screen you first need to update the home.mode9 file. You will find a cab to install the mode9 and make the necessary reg edit in the zip folder with the widget cabs. Poyensa has edited this one for me to make the first eight widget slots appear behind eveything else so I have his original background widget and my seven installed and working perfectly. As an added bonus, and because the backgrounds will use up to eight widget slots this mode9 is also modified to allow up to 40 CHT widgets to be installed (the original maximum was only 20) so you shouldn't run out of space!"
And actually it was only 10 in the original coded but 20 "targetet"
The original CHT mode9 file (7c60907d_manila) indeed allowed only 20 slots, but in the Sk-i theme, the one modded or used was not the original file from CHT, but the one Mike modded!!! and not tested/approved for release
So let´s wait for Mike´s reasons and motives for not releasing it yet.....
A few weeks back, it was agreed that there were still some issues pending to be resolved prior to a public release as you remember when rat informed us about the mode of 3a8e04af_manila
No dissapointments friends, I have edited my posts to give propper credits to mike2nl. I've really always thought that mike is the creator of the original fix. Sorry for the inconveniences that this may have caused.

Categories

Resources