Hi All,
Thank you xda forum, I was searching and learning from you and ppcgeeks all these two days.
My Touch Pro (Bell Mobility) now is always in reboot loop, it only shows white "Touch PRO" in the 1st screen. After around 30 - 40 seconds, reboot again. Neven been rebooted sucessfully.
Here are what I did:
1. originally it should be SPL-0.35 or -0.25 somthing like that, after use Raphael_CDMA_HSPL_037 unlock , well done, it shows 0.37-comex (thanks this forum and authors)
2. use PC to flash a chinese version ROM, says sucessfully 100% done.
BUT after that it was going to reboot loop (what i guess is it's a GSM version only?)
3. I want to make it back to original, so I use that Raphael_CDMA_Relocker (BEFORE I REALIZED should flash BELL Stock rom first).
4. in tri-cololr screen, now it says RAPH800 SPL-0.37-0000 (relocked already?)
5. I could not flash anything in anymore, ActiveSync conection could not been connnected, and RUU always said 262 error and when reboot 100% goes to reboot loop, have to take out of the battery to close it.
Anyone have suggestion how should I do? I am still in the 1st month warranty, but afraid Bell will not accept it.
I tried hardset, use Raphael_CDMA_HSPL_037 to lock it again (failed due 262 problem, stucked on 0% screen), or put different RAPHIMG.nbh (tried one by one) to SD card (always only "loading", and after long time i have to reboot it and still the same infinite loop).
Thanks for you patience, please ignore my bad english.
unbrick
i suggest if you havent already done so: to put .nbh image on your sd card and boot it.
I agree. the only thing at this point you can do is flash from the SD card.
Take it out of your phone, and plug it into your computer. Take the .nbh file from another ROM that has worked for you and rename it RAPHIMG.nbh . Then copy that onto the Root of your SD card. put the card back into your phone, and enter bootloader by holding the power button, and volume down button, take your stylus and reset. (Don't need to hold the center okay button like a hard reset) take the stylus out and follow the instructions.
on my experience download a shipped ROM of any kind. If you still see SPL 0.37.CMONEX i think you are still safe. Just plug it in, active sync will not recognize it since it is in a different operating mode, just execute the shipped rom and that should do the trick.
unforunatly theres no bell shipped, just bell dumped roms..but put it in bootloader (hold volume down, poer, then stylus in reset hole till tri-colour screen) and plug it into your computer. does the word 'serial' change to 'usb' at the bottom? if so, run the RUU for the bell stock rom. feel free to pm me, im on bell too and im sure we can sort you out mate. lemme know if you cant find the stock bell rom
the-wrangler said:
unforunatly theres no bell shipped, just bell dumped roms..but put it in bootloader (hold volume down, poer, then stylus in reset hole till tri-colour screen) and plug it into your computer. does the word 'serial' change to 'usb' at the bottom? if so, run the RUU for the bell stock rom. feel free to pm me, im on bell too and im sure we can sort you out mate. lemme know if you cant find the stock bell rom
Click to expand...
Click to collapse
on the money here..just what i would have suggested!
Related
So was following directions to upgrade to nuerom, and i accidently installed the old bootloader 1.2 (olipro), and so i then upgraded the ROM afterwards to the nuerom.
Well now my phone turns on and goes to the HTC screen but just sits there and does nothing.
Hard and soft reset don't change anything...what can i do?!
run the re-locker and then the 2.4 bootloader
you can find them both here
http://forum.ppcgeeks.com/showthread.php?t=9093
coffey_joshua said:
run the re-locker and then the 2.4 bootloader
you can find them both here
http://forum.ppcgeeks.com/showthread.php?t=9093
Click to expand...
Click to collapse
But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...
TripFlex said:
But it wont even connect via activesync, it just sits at the first screen you see whenever you boot your phone up...
Click to expand...
Click to collapse
put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync
no active sync
If you cant connect to active sync, open active sync on home pc go to conections and uncheck usb connection that helped me last night
rbadh91 said:
put it in bootloader mode first...hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus, and then try it...plus u dont have to be connected w/ activesync
Click to expand...
Click to collapse
if you follow his way it works but also
*please be cautious i'm new but i know my stuff*
your going to have to format the micoSD card to FAT32 with a MicroSD card reader or some type of MicroSD to SD converter(http://en.wikipedia.org/wiki/MicroSD)
(goto my computer/ right click the drive it was assigned to and click format... then under "file system" click on FAT32 then click format)
Download the rom update from HTC
Open the exe in WinRAR (rarlabs.com)
Find RUU_signed.nbh (it will be the biggest file)
extract it onto your desktop and rename it to TITAIMG.nbh
Move the file over to the formatted card and then insert it into phone.
Hold down "Power Button" + "Camera Button" & press the "Reset Button" with stylus
and done your phone should reconfigure back to how it would be "Virgin"
AtOMiiX
-CiiO kUrWa
same issue
I followed the format sd card directions, put in phone went to bootloader screen . BUT IT HAS BEEN DOWNLOADING FOR LIKE 15 MIN,
I guess my real question is did it freeze or should i let it keep going
Trying to flash from sd card Still in loading mode help
It is in loading mode for a half in hour is that normal
i have never used the sd card...bit i believe its gotta write about 50+mb of stuff to ur fone...it takes about 10 mins over usb2.0 (it doesnt really go to that speed) so i guess it can take that long
please post how long it took if it goes successful for others to know...thanks
I'm having the same problem here.
I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...
H'Roth-Gar said:
I'm having the same problem here.
I ran the relocker, but it still says SPL-1.20.Olipro... I don't know why it didn't relock... what should I do, the SD option didn't seem to work either...
Click to expand...
Click to collapse
i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot
it take 5-10 min its really fast... try it again or grab a different ROM
SD card Flashing wont work.
I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND
JonnyBoy313 said:
I Really Am stuck. Flashing did not seem to work left it in the downloading for over an hour, then gave up. (I was trying to update to DCD Titan 2.1.0, From Sprint 2.17.651.0, Radio Version 1.47.01 ORIGINALY gave me problem Stuck in htc black screen)
I wont connect activesync, or usb peroid, so I formatted SDcard to FAT32, put the Sprint 2.17.651.0.nbh file into the card renamed it TITAIMG.nbh, and tried to flash. (Loading screen for over an hour, then gave up)
Some else said somthing about flashin 3.16 because of radio issues.
(from going 2.17, to DCD 2.1.0) but I cant find 3.16.nbh. if anyone could Link me to it that would be cool.
ANTHING THAT COULD HELP ME UNBRICK MY MOGUL,PLEASE SEND
Click to expand...
Click to collapse
When you go into bootloader mode (power/camera/reset), what bootloader version is displayed on the screen? When you upgraded to the DCD ROM, did you also flash the new radio?
Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.
I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.
Any takers on how I might be able to get this bad boy up and running again?
PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.
I appreicate if anyone can help both of us (the guy who posted the thread, too) out.
try extracting the relocker and then flash it.
Thanks guys this thread really helped me
s10onn2o said:
try extracting the relocker and then flash it.
Click to expand...
Click to collapse
If this is directed towards me, I extracted the relocker but I don't know what you mean by "flash it"
I thought flashing the ROM meant reinstalling a previous version or something. I've already tried running the relocker but like I said it requires an activesync connection but that doesn't work since I can only access R/G/B mode.
All the files inside the relocker are gibberish to me. Don't know what any of those things do separately.
TripFlex said:
i got it fixed...basically what you have to do is go into the bootloader like everyone said and then i reflashed it with the original rom...after that i learned that you have to run the radio in order to boot
Click to expand...
Click to collapse
Thanks, after pulling out my hair for a couple of hours, I finally was able to get it to work. The stock rom wouldn't flash at first for me, but I was able to get it to work on the third try... everything seems fine now...
willxcore said:
Can I add my dilemma to this thread? My Mogul also won't boot up. It gets to the yellow Sprint logo screen and then just shuts right back off.
I also, hard reset and that doesn't help. I can get to the bootloader screen but trying the Relocker means it wants my phone connected via Activesync (it calls for that in the DOS window that pops up), Activesync doesn't recognize the connection since the phone is in BL mode. Nothing I've tried so far has worked and some people on howardforums have tried to help and said I needed to install the radio only first and then go from there but I have had some trouble finding the original Radio as a download by itself.
Any takers on how I might be able to get this bad boy up and running again?
PS. I've also tried to install the original ROM found on the official HTC website and that didn't work either.
I appreicate if anyone can help both of us (the guy who posted the thread, too) out.
Click to expand...
Click to collapse
If you are in bootloader, try flashing the "unofficial leaked" ROM. NOT one of the custom ROMs based on it, but the complete leaked package; it includes compatible bootloader, radio, and ROM, and should get you back up and running. You should then be able to run the old relocker and the old official radio and ROM package if that is what you are trying to do.
http://forum.xda-developers.com/showthread.php?t=362403
For those of you who also read PPC Geeks, this is the same problem. I am just trying to cover more area and hopefully stumble across somebody that has a solution to my problem.
The current situation is that the phone will not boot at all. I can hard reset it, I can enter into the bootloader (which is no2Chem 2.47) and I can flash ROMs to it. However, when I try to boot the phone, the black HTC logo flashes for about half a second and then I get a black screen.
I have tried flashing the Sprint ROM available on HTC's website (RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_ SPCS2.04_PPST_0718_Ship.exe) and this one: RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4 350H_SPCS_AM_Ship.exe.
I've hard resetted, soft resetted, taken the battery etc. Anybody have any idea what I should do or why this is happening? Thanks for the help!
Try some things here.
Follow section B. Usb Downgrade, I believe..
http://wiki.xda-developers.com/index.php?pagename=TitanStockHome
let me know if I helped ya out.
Ryan
I wasn't able to do any of that since I cannot create an Activesync connection between my phone and pc.
I think you may have messed up your bootloader, try and get another one installed on it. I recommed olipro 2.40 and radio 3.35 but you can use a higher radio. Dude you dont need an active sync connection, read the wiki article further. At most you would need the WMmodem drivers installed on your computer. Just put the phone in bootloader (power, camera, reset) and run the tools on the wiki site i linked to you. You can run RUU Rom Update Utility from your Home computer while phone is in bootloader mode, you do not need to have the phone fully booted into windows mobile and synced, or even connected to active sync. Hope this helps I could be wrong though, just try some things and read.
I tried running the TITAN_RELOCKER.EXE, but it wouldn't do it since it didn't have an ActiveSync connection. I have tried the RUU with multiple NBH files. Trying to flash the radio, rom, and/or spl. I will try the bootloader stuff again. Thanks.
EDIT:
Found a new symptom. When I don't have the power cable in I can use the power button to turn on the device and the top right light is green. When I plug it in the light flashes red and won't let me use the power button to turn it on, but will do the same "flash the HTC boot screen" if I soft reset.
Try renaming the .nbh file to TITAIMG.nbh and put it in a 1GB or less microsd card and then press the power button + the camera Button together and hold, and then press the reset button that is located next to your usb charging/syncing slot
good luck
I will give that a try. Does anyone have the nueSpl NBH or any other bootloader for that matter? I can only find the exe to run on the phone and I can't do that.
Hmm it says flash a boot screen? Sounds like you may need to do just that. I have never heard of the blinking red light other than low battery. You can try using PPC Geeks kitchen to build your own rom (temporarily) and you can choose which bootscreens you want to use. If you get the bootscreens to succesfully flash you can either test the ROM and see if you like it or flash the ROM of your choice and it will not overwrite your bootscreens, some overwrite the windows 6.1 screen but most of them do not.
PPCGeeks.com How to unlock device and cook your own rom
Read through that thread and download the PPC Kitchen, now dont open the kitchen run the kitchen updater, pick titan files, and the newest build 20931 and get started after that.
Dont pick an animation just splash, sub splash, and the Windows 6.1 splash. Now run it let it do its thing just make sure you are in bootloader before plugging in to computer. If the flash still doesnt work then you can try the MicroSD card method. Format the card to FAT32 and make sure its totally empty(not even a folder). Now navigate on your computer to mydocuments/buildOS RUU, then look for the RUU_Signed.nbh and copy and paste it to the Memory card and Rename to TITAIMG.nbh now put the card in your phone and then into bootloader mode(power camera reset same time) and let it try flashing. If you still cant get it to work and you have tried starting from scratch then the phone may be a brick. Hard to tell now try some more things.
Ryan
Hi All,
I flashed my HTC Fuze with the below ROM
Calkulin's Visual HTC Kitchen v4 for Touch Pro and my mobile is dead now. I missed to unlock the phone before running this update (although very clearly mentioned in the instructions )
Since the mobile is not booting I am not able to flash it with any other ROM or revert back what I did. Computer does not recognize the mobile through ActiveSync. I tried resetting the mobile (Power button + volume down button + OK button), it even says restoring to factory settings, but after restart still hangs at the AT&T screen.
Can anyone please help me out here or I need to take my phone to AT&T service, but that would be the last thing to do as I think the warranty is void with this tampering.
Well, I'm pretty sure that Calkulin cooks for the Herman (aka cdma touch pro). This is your problem (and maybe not your only one).
Flash a stock rom off your sd card.
Edit: Wow, that link takes you to the cdma Diamond forum at ppcgeeks. What were you thinking?
Thanks a lot Ted...!
Thanks a lot Ted. You are my "knight in shining armor". Atleast I have some hope, I think
You just said "Flash a stock rom off your sd card.". Can you please let me know or direct me to a post that tells how to flash rom off the sd card? I am however searching for the best fit for my set.
Also, I think i need to search for an appropriate ROM for my fuze this time.
Thanks again.
Um yeah...you might've just bricked your phone. Your best bet is trying to reflash your phone with an OEM ROM via a MicroSD card, then going to one of the cooked GSM roms on this forum.
Look at the stickied threads in this forum for the procedure and links to an ATT rom.
If that doesn't work, you could try going to an ATT store and playing dumb...there's a small chance they'll replace it under warranty if it hasn't expired yet. If all else fails...you might be able to score a fuze from ebay on the cheap...I'm sure there's a lot of people upgrading to touch pro 2.
Thanks for your reply.
streetlight22 and Ted, Thanks for your reply. I will try this today. Keeping my fingers crossed . If this works, I would be happier than ever (not because I could save some bucks.. but because I love my fuze and can't see it dying).
Every where the step says "renaming the ROM nbh file to RAPHIMG.nbh or something like that. I am wondering if I also need to rename the .nbh file to something before running the update.
The rom image will be named ruu_signed.nbh (if it's a custom rom) or something longer if it's a stock rom. You should try a stock ATT rom image. Just rename it, stick it on the root of your sd card (must be FAT32), and see if you can go into bootloader. If you can't get into bootloader, you're screwed. Remember to hold volume down for several seconds after soft resetting. Press it down before soft resetting. If the tri-color screen doesn't appear, you're in trouble. It should appear briefly, then go grey with a message like 'loading image,' then it will tell you to push power. But if you flashed a diamond cdma rom, you may have totally screwed things up. Most people seem to recover from cdma touch pro roms, but if it's from a different device, you may be screwed.
Hi, if the tri colour screen appears you can try flashing trough your PC, it should find new hardware (htc hot sync or similar), then there should be USB written in the lowest part, then you can flash watever you want from the PC in the manner you are used to.
It worked.. it worked.. my fuze is now up and running WM 6.1. Thanks to all...! Special thanks to Ted for his quick reply and the tip "Remember to hold volume down for several seconds after soft resetting. Press it down before soft resetting". This is what I was not trying inorder to connect fuze with my laptop. My set is back to normal, up and running cool...
Once again thanks to everybody. xda-developers is really really a life saver . Great job guys, keep going...keep helping newbies like us.... we really need u
Hello!
It's insane, here is the description.
The android booted up just in safe mode.
The winmo had faults, so I've decided to change the whole system, with task 29.
At first I've changed my radio to the 2_12_50_02_2 version.
Than I've started the task29, the one what do not needs the radio.
Thats all I've done, and now I cannot reach the boot loader, or anything else.
The vol up and start trick is not working.
Please give me a solution, I need this phone working, I need a solution, and I appreciate every tip.
Thank You in advance!!!!
its volume down, not up.
same problem for me here
i did task29 and it was all fine, 100% reached and then the HD2 did a reboot, stopping at the black screen with the white HTC logo.
then as always i removed the battery and put it in again, holding vol down und clicking power-up once.
nothing happend... the phone vibrated once and got back to the HTC logo.
NO bootloader!
please do not tell me i'm too dumb to enter bootloader, i've been flashing custom roms for 6 months now!
my latest rom was Goatrip 6.0 and HSLP is 2.08
yesterday when goa6 was still "alive" the volume-down button worked fine, so the problem cant be some dust or dirt beneath the buttons.
edit: i've also tried flashing via SD card (clean FAT32 formatted 2gb card) the original stock rom 3.14 and a custom rom,
none of them is working either
every single hint of how i could solve this issue would be great!
hope to here from u guys
Remove the SD card and try again to go into BootLoader mode.
i have tried all methods and variations but i cant enter bootloader...
now i have found this thread:
--eeeeek cant post links --
its referring to the TP2 but i thought i would give it a try!
i've done this sketchy voldown+power+usbcable+batteryplugin thing but no result, even after 10 attempts :-(
Since you removed the battery, are all the pins straight?
those 5 (2 1 2) pins are in good shape
i cant post a link yet, ill send it to u via PM
posting links enabled:
http://forum.ppcgeeks.com/htc-touch-pro-2/122134-task29-didnt-complete-cant-enter-bootloader.html
i got it!
my stepfather owns a HD2, too.
i plug mine into his docking station while i was on the phone with htc support... just because i was bored waiting in the queue.
after the phone call i tried once again to enter bootloader e voila => boooom 3 colour screen!
i dont know whats the reason for, but i flashed my custom rom as fast as i could and it works fine.
but even now i cant enter bootloader properly...for 10 times trying 2 times actually work!
in the WM Os its no problem, Vol-Down functionality is 100%
cant explain that to me,
i think u need some luck to get this issue solved
___EDIT___
now with my customrom i could easily enter the bootloader via software command
and therefore i downgraded HSPL to stock spl1.42.000.
after this i flashed 2.08.hspl again and NOW my bootloader is working as intended!
u see, once u can get into bootloader again, all your problems can be fixed.
without him, you're f*cked
greetings
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset