Related
Hi All,
I'm new to the PDA-world and the Hermes. I'm trying to Hard SPL my Hermes, but it fails everytime.
When I run 2.10 - Hard-SPL-V7, it kills activesync and my connection is lost and I get always the message "error 260, Update error".
I have the latest framework edition and tried it on 3 pc's (1 Vista, 2 XP)...
What am I doing wrong?
Hope somebody can help me....
Kind Regards,
Micha
1). dont connect to active sync. open active sync and untick "allow usb connections".
2). put hermes into bootloader and connect to usb.
3). run ruu_wrapper.exe
should update to hard spl....
dont forget to tick "allow usb connections" again or you wnot be able to sync..
error 260 is an open port error.
if you wish to flash new os would advise to use sd card method. its safer than using the computer. just make sure you have greater than 50% battery power. happy flashing
Thnx, will give it a try.
First I have to flash HardSPL before I can flash a new OS, don't I?
yep, sorry, should have said run the ruu_wrapper for hard spl. My bad...
im having the same problem. I also tried the way ultramag recommended but i also received the same ending. After time i try i get the Error 260 Update error. Im running SPL 2.04 and the HTC WM6 rom from the HTC website. Does any one know what the problem is?
ultramag69 said:
2). put hermes into bootloader and connect to usb.
Click to expand...
Click to collapse
NOOOOO, that won't work, you need the SSPL to deploy to the phone, if you're running stock HTC bootloader this won't work at all, otherwise we'd have no need for Hard-SPL
hey olipro, then how would i fix this. Im running the stock rom from the HTC website with no hacks. Im trying to load PDA Corners V9 rom. Any ideas on how to fix? thanks!
Take a peek at the guide i wrote about updating the hardspl. Theres some explanation about why we need to use SSPL and the procedures.
http://www.mrvanx.org/hermes_guide/hardspl
thats the guide i used. it still gives me the error. I even unchecked "allow connections" cause i read somewhere that that would help.
i did this two days ago on my phone, im running windows vista on my home laptop and got any number of errors and problems trying to do it via sync with the phone (even after reading the vista troubleshooter, with the drivers etc)
What i ended up using was the memory card upgrade, dump the file onto the memory card and go into bootloader with the card installed.
worked fine doing that way, maybe less risky as there is no chance of the usb cable coming out.
just make sure you have a good battery charge on the phone.
Help Help Help w bricked 8525
I got into this position trying to upgrade WM5 to WM6 from HTC site.
Process got to 20% and just stayed there.
I reconnected usb cable and got a vendor id error
Then I get the Error [260]: CONNECTION
I have read a lot of posts and have tried the sd method (although i am not 100% clear) and all i get is the screen with four colors, red, green blue and white.
I believe this is the bootloader? I have downloaded RUU_signed.nbh, renamed it to hermimg.nbh, installed on root of my SD card and held OK, soft reset and power button:
My display reads:
HERM100
IPL-1.04
HERM100
SPL-2.03
This is where my journey ends.
All post indicate that the device can be reflashed and have the OS reinstalled. I can't get there from here.
Can anyone please help?
blackdog9692 said:
I have read a lot of posts and have tried the sd method (although i am not 100% clear) and all i get is the screen with four colors, red, green blue and white.
Click to expand...
Click to collapse
How big is your SD card? Flashing only works with cards <2GB. Also, sometimes certain cards just don't work for flashing, and just swapping to a different card fixes the problem.
I assume you searched the wiki, and found the relevant pages on the Hermes (including SD Card Flashing and other things about flashing/upgrading) there?
Still Lost
My SD is 2GB and I have tried many times but i just keep getting the 4 color screen. rt now when i boot from the SD my screen goes white and displays "Loading..." and then returns to bootloader screen. When i attempt to flash the rom via PC to WM5 or WM6 i get the Error 260, i also get a vendor ID error sometimes.
How can i find the key 8525 thread that i am told has the answer to my delima? I keep picking up bits and pieces but am missing some key steps and tips.
blackdog9692 said:
My SD is 2GB and I have tried many times but i just keep getting the 4 color screen. rt now when i boot from the SD my screen goes white and displays "Loading..." and then returns to bootloader screen.
Click to expand...
Click to collapse
That sounds like the SD card is formatted incorrectly. Make sure it's formatted using fat32, nothing else will work.
Still not there from here
Thanks for your help. Before I formatted the SD FAT32, nothing would happen doing the bootloader reset. OK/ON/reset button.
After format and only the hermimg.nbh file renamed as indicated, I then get what looks like the loading process but back to the bootloader screen.
Q1: This is an AT&T 8525, it was perfectly fine before failure from WM5 to WM6 (process froze at 20%), what is the RUU file that I need to put on SD??
Q2: After "Loading ..." I try the WM5 PC upgrade of ROM via USB cable, I get the load process to appear to work but it gets to 1% and the phone reboots and the PC reports error [294]: Invalid vendor ID. If I do this again I will get the Error [260]. Ive repeated the process several times.
Is this the normal course to take or should the "SD Method" (with the WM5 or WM6 RUU.. file) complete the process to a working OS?
Q3: Is my situation hopeless? ATT will take my out of warrantee 8525 and reflash for $129. Reading the threads it seems that like me this can be done by me, this is my desire.
Q4: I still am confused by some basic terms and assumed steps. I dont understand "Hard SPL" or OLI's IPLs/SPLs and when and when to use them.
The newbe guide has been off line. I will look again. Is there a single place to read about "radio PDAs and the 8525 and understand the software build and custom options?
Sy for the long post. But still want to fix if possible or I will be force to mail in for ATT repair.
Thank you all.
blackdog9692 said:
Q4: I still am confused by some basic terms and assumed steps. I dont understand "Hard SPL" or OLI's IPLs/SPLs and when and when to use them.
Click to expand...
Click to collapse
Oh boy, you haven't installed HardSPL? You are walking a bit of a line there mate...
HardSPL is a custom boot loader that makes bricking your phone when flashing much harder to do, and helps large amounts in the recovery process if you phone does brick.
Does the phone boot at this point? If so, do not try flashing the phone again. Go get a copy of HardSPL and install it, then try flashing from the SD.
I still wonder why people didn't read before bricking...
Anyway, you should start reading now and wiki is your friend. Your SPL is 2.03, so look at the bottom of the page (there is only one solution till now, so good luck with that):
Code:
1. Boot OS using KITL+PB
2. Do no disconnect your HERMES till the end of the step 6
3. Download SSPL on HERMES by wifi from ie explorer
4. Launch SSPL then flash Hard-SPL from your computer
5. Put your hermes in bootloader mode
6. Flash any radio in NBH format from your computer
Still researching and working this bricked 8525
Thanks for coming to my aide. I believe that I have Hard SPL'd my device. I downloaded Olipro's Hard SPL v7. extracted the RUU_ file and renamed to hermimg.nbh.
I then put it on an SD card and held the keys and reset. The device displayed a white screen and "Loading..." appeared. Afterward the 8525 returned to the stipped boat loader screen and that is where I am now.
Some of the help i receive and read on wiki threads has me confused with what to do next and how "exactly" to do it.
It does seem that I am not alone and people have fixed their phones and the process to do this is on the forum. I'm just still missing something.
Help me further if u can.
Thank you.
blackdog9692 said:
Thanks for coming to my aide. I believe that I have Hard SPL'd my device. I downloaded Olipro's Hard SPL v7. extracted the RUU_ file and renamed to hermimg.nbh.
Click to expand...
Click to collapse
FYI: bad form to PM someone and post the same thing here. Keep it in the thread so others can be helped as well.
As I replied in the PM, if I'm understanding your post correctly, the phone boots to the tri-colour screen?
What text is showing on the screen? This will tell if HardSPL is on the phone or not.
jdc said:
What text is showing on the screen? This will tell if HardSPL is on the phone or not.
Click to expand...
Click to collapse
We already know that the phone is without HardSPL, according:
My display reads:
HERM100
IPL-1.04
HERM100
SPL-2.03
This is where my journey ends.
Click to expand...
Click to collapse
There is small chance (read my previous post) to unbrick device with SPL2.03 so better try to get this back from where you take it.
And please, change topic, because this brick isn't HardSPL fault at all.
Edit: oh dear, it's even not your topic ...good game, I'm off
Is there anyway that is 100% safe to upgrade or is there always some amount of risk that a unit will end up a brick ?
I've read so much here and on other forums my head spins lol. I was like all set to just do it and then I got the phone lol, now I'm getting cold feet because I read so many people have bricked their phone.
Also can the SPL be done by SD card or does it need to be done with a computer ? I know some will say do a search, I have and man there are so many choices is there just a page or link with a simple idiots guide ?
Its better to do all the upgrading through a PC. Its more safer than SD Card upgrade.
Simple way
Do the HardSPL first then do anything you want. Try to look for Mr.Vanx guides
I agree with beastfellow, install hardspl first then you can flash any hermes rom you like. I have flashed my heremes over 50 times,i even flashed it 12 times in a week as long as the roms you have have no radio or spl in them then they should be fine to flash. Just make sure they hermes roms you are flashing.
hardspl can be downloaded from here http://pof.eslack.org/hermes-unlocker/
guide to how to do it is located here
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
other guides and there links can be found here
http://forum.xda-developers.com/showthread.php?t=299462
anyway my advice is to go for it. I have only ever bricked one device and that was a wallaby back in the day.
good luck and make sure you read EVERYTHING ,twice if you have to
Dalork,
I felt exactly the same way as you a couple of years back. What I did was to read every scrap of info I could find, constantly assessing the risk, while looking for a stable rom.
Key criteria for my rom search was what other people were saying about that rom (good and bad) and the developers willingness to resolve issues. In the first instance this led me to Schaps and his brilliant roms. For my rom history see my signature.
Read the following threads very carefully, then read the threads on one rom from Schaps and, say, a rom from Kin0ken. Look at the 6.0 roms, NOT the 6.1 versions...
http://www.mrvanx.org/thg/
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes.
Also use these search tools:
wiki - http://www.google.com/advanced_search?q= +site:http://wiki.xda-developers.com&hl=en&lr=&as_qdr=all
forum - http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
entire xda site -
http://www.google.com/search?q=site:xda-developers.com
Once you are fully genned up then prepare your kit carefully, e.g. make sure your phone batttery is fully charged, then upgrade your rom as you logically and carefully work your way step by step through Mr Vanx guides.
First time I upgraded I had the Mr Vanxguide open on my desktop PC whilst I ran the rom upgrade off my laptop. Using the laptop meant that in the unlikely event of a power cut (does happen where I live) I wouldn't instantly end up with a bricked phone.
Good luck and PM me if you need help/any further info.
Cheers
WB
Thanks for the help folks, I'm just worried I'll brick it as I have a friend who tried this and his is a nice paper-weight now.
I must be getting confused as I thought doing the flashing direct frm the SD card was the safest ?
Anyways, I'm not certain at this point which is the best or safest ROM to go with. I was going to do the Hard-SPL-V7 (2.10 Olipro) and was think of the Schaps_WM6Pro_Hermes_4.31_WWE_Full.
ATM the unit has ROM 1.30.707.4 8/22/06 and Radio 1.20.31.10
I don't think it's ever been flashed as yet as the bootloader is IPL-1.01-SPL-1.06
ask your mate if i can have his paper weight i have a nice rock to swap for it
scousemartin, lol I had already asked him that before I bought my dopod as I was hoping to come here and find out if it could be fixed.
Another point, after upgrading the phone to say WM6 or whatever can you still recover/reload the original factory WM5 system/set-up ?
I guess I'm in-fact quite happy with how the phone is already I just really want to be able to use a 8GB Micro SDHC card so I can load more programs and music. I don't know if any of the radio ROM's will improve my signal as such but battery life seems to be ok already. Used the phone quite a bit today, started off with 80% battery and finished off tonight with still having 70%.
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
ultramag69 said:
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
Click to expand...
Click to collapse
Thanks heaps for that, and I agree I did think flashing from a SD card would be safer as there is no risk in USB/sync problems, no cable to bump...etc..etc... But then I'm a total newbie, what I think doesn't always make sense lol.
If I just do the Hard-SPL-V7 and then something like Schaps_WM6Pro_Hermes_4.31_WWE_Full and don't do the radio ROm is there really much chance of bricking the Dopod ?
While I say I'm not bothered with upgrading the OS and everything else, it's mostly because I'm **** scraed of bricking it lol. I guess it would be silly to say I wouldn't like the better features of a decent upgrade, I just have to get my head around it somehow. But I WILL need more space as I really like to put lots of music on it and some games/apps. Hence the SDHC, I'd like 4GB but would love 8GB as I doubt I'd ever run out of room then.
As it is with my current phone I have 3 x 1GB cards which I just swap around and I hate having to do that and I'm always losing/misplacing the damn things.
If you are SERIOUSLY thinking of upgrading, Hard SPL your phone. You can find the thread "Hard SPL or how not to brick your Hermes" in the upgrading section. Its best to do this as it is the safest we thing you can do. It won't prevent a brick but it makes it a lot more fixable. I have never bricked a phone that I couldn't fix (yet) with Hard SPL on it.
Its fairly difficult, I find bricking the hermes when using the sd card method, as long as you make sure you have Hard SPL, Unlock your Hermes(if needed, did this as wasn't sure) and make sure your battery is charged.
Unlock before putting Hard SPL on though as it downgrades the SPL to 1.10 olipro.
Also use Hard SPL ver.7 (should say SPL 2.10 olipro after upgrade) as ver 9 is the developers SPL (says SPL 2.60) and throws up error messages (if done from the pc) after flash.
As for the rom, no-one can say what is best... What is suitable for me may not be for you. If you ask this questiopn on a thread you'll be inundated with "This rom is best..." remarks. Search and you will see.
Hope this shines some light on the subject (forgive me if this seems scattered, too much caffeine and not enough sleep), anyway,
Cheers....
Thanks for the info and it does help/shed light on it. I have read heaps of info about most everything here, maybe more than I should have even to sart off with lol. I would normally not have been so concerned except that I have a friend close by who tried this exact way of flashing and still somehow bricked phone. Though he did say with folks help here he did get the unit working again but the radio never worked again I think he said.
I already downloaded a copy of Hard-SPL-V7 and Schaps_WM6Pro_Hermes_4.31_WWE_Full.
Not certain if this is the right one for me or not but seems alot of people like it and find it stable. I also grabbed this HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship though I'm not certain if it's any good or not. I haven't grabbed the unlocking file, not sure I need it or not. With flashing the Hard-SPL-V7 by sd card am I right in what I have read that all I need to do is rename the nbh. file and not the RUUWrapper_exe.
I am finding it difficult to get the Dopod to use 3G for web browsing/email though. But someone told me that the original set-up/ROM wasn't much good for the Optus/Virgin 3G network.
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
ultramag69 said:
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
Click to expand...
Click to collapse
You got me really confused now lol, I thought I only needed to run the Hard SPL and then whatever ROM I liked (was looking at ones without radio ROM's). Also do you think it would be wsie to flash it with a radio stack for Telstra when I'm using Virgin as it seems Virgin is using the Optus network.
Sorry if I sound daft just the more I read the more confused I'm getting. Also it seems that everyone does have a different opinion on how and what is best. Just want to work out what is best for me before I have a go at bricking my phone lol. I've not found setting up SMS/MMS hard at all. Seeed pretty easy, having most my trouble setting it up for Virgin's 3G access for web browsing. Just can't seem to get it to work, got it set-up for wifi at home no drama but don't really need web access from the phone when I'm at home and have several computers.
Sorry, Information overload...
1. CWW Enterprises Aus Operator Con.cab - this cab file does a quick loading of sms/mms setting on the phone. You can use ANY rom and then setup your messaging with this. First however, install 2.
2. ARCSoft MMSComposer cab - This allows the use of mms on your phone properly. Some roms don't seem to set up your mms properly. If you have this installed then run 1. it will fix it all up.
I believe it should fix up ALL settings (including the 3g ones) as when you flash a rom, no native settings are kept and I've never had trouble using 3g after installing 1. and 2. then running 1. (will be in programs). It will soft reset your phone after setting it up.
Confused...
Really, just find the rom you want, check in settings as some have an auto network wizard to set this up. I just like CWW Enterprises Aus Operator Con.cab as it was made by an Aussie to use here. Its good when you don't have the network setup wizard (lite roms generally don't come with the frills)
Hope this clears it up....(preferably like glass and not like mud)
Cheers...
I am intrested in buying a Hermes, most likely the unbranded HTC tytn that I believe comes all unlocked.
For that one the procedure is the same still, right?
Hard spl install and choose rome you like
I have seen eithe Schaps 6 or the newer 6.1 with diamond stuff in it
So would I have the same procedure. To find the hard spl (not sure which version to install) and then find the rom w/out a radio?
es_bih, yes. Its the same procedure. Instyall Hard SPL ver 7(ver 9 is the developer one. It tends to throw up an error after upgrading via pc, no problem though).
As for the rom, make sure its a hermes rom. Any you find on this forum are for the Hermes BUT if you go to the other forums (herald, kaiser, etc....) the roms will brick your device as it isn't compatible with your device. Cooked roms are good but until you get to know the vagaries of wm6.1 I'd suggest to stick with wm6. Its more stable than wm6.1. Play with that and then when you are confident enough to try, then go for wm6.1.
Most if not all cooked roms come without a radio rom.
Cheers...
Tried doing the Hard-SPL-V7 on Vista x64 computer and get error 260 problems.
Tried on a XP laptop and got a different option. The first screen that comes up after running the RUUWrapper.exe not only give me the choice of "Force SSPL" but also allows me to tick "Is this Hard SPL ? "
In the guides I've been reading it says you should only get the "Force SSPL". So my question is seeing as I have the option of ticking "Is this Hard SPL?" should I ?
Installing Hard SPL? Tick SSPL. After that you can pick either.
Hmmm, can't seem to get it to do it. Sounds so simple I must be missing something somewhere. No matter what I try I stillget the ERROR 260 (update error)
Dear Members,
I tried to upgrade my JasJam with "838Pro_HK_ENG_WM6_Upgrade_20070712"
Which worked with other JasJams (Many of my friends has it working).
On upgrading, it stucked on 11% saying Error [262]
I went through recovery, and it said remove the USB cable, remove the Battry, Return it, start the phone, connect the USB, and its recovered.
After that Its again stucked in 100% and the same senario is happening.
Please tell me is there any possibility to restore my phone working.
Its stuck now, and only the (Three color screen) is on the screen.
Hard reset, soft reset is not functioning, and the phone refused to show anything except the three color screen.
I searched the forum, but found no relative article, I am searching since two days your forum and I know that no other forums can help me in this as I was always getting my help from yours.
Thanks for your time.
HERM100
IPL-1.04
HERM100
SPL-1. 40. 0lopro
If you're using XP then untick "Allow USB Connection" in activesync.
Reset to bootloader on your Hermes, Hold power, OK button above flywheel and reset with stylus.You will get the same screen you have now but it won't be a f*&%ed up version of bootloader. Connect to PC by USB and Install Hard SPL V7, found here - http://forum.xda-developers.com/showthread.php?t=296722
After this, use the sd card method to install the ROM.
1. Format a 2Gb or less sd card FAT32. ?CFopy the .nbh file of the rom you want to it and rename to hermimg.nbh .
2. Insert into phone and reset to bootloader.
3 If you did everything right then follow the prompts...
Cheers...
Again problem!
Dear ultramag69,
Thank you for your fast reply.
I did (untick) that option in the ActiveSync.
And also did reset to the device by holding the Power + Ok (under the flywheel) with Stylus reset.
After that I downloaded "Hard SPL V7" and tried to update.
First of all, in the "Hard SPL V7" there was only the last option active, and there was down a checkbox also active, but when choosing the last option, checkbox bocomes like everything else disabled.
However, I got the erro 286
I felt like the Device disconnected from USB and reconnected again (Windows gave me the sound when you remove some USB device and you re-connect it again) :-|
I don't know what to do with this dead device now !
Thank you very very much for your time and help
Don't quote me on this as I suspect you need Hard SPL V7 but, as yo've tried things out and you're about to quit anyway, Try using the sd card to update the Stock rom, the rom that came on your Hermes, or updated version. It might let you do it if the CID matches.
I don't believe SPL 1.40 allowed you to flash ANY rom but it may let you re-install the stock rom BUT it must be the original carrier software it came with. If you had Telstra rom on it when you got it, it must be a telstra rom you flash. Make sure its for the right country too as some carriers are all over the world.
Cheers...
Hello ultramag69,
Thanks alot for your reply.
Having my i-mate dead, is really interesting.
I am trying to recover it up, Mine came with (HTC) logo when booting, and I did flushed it with Dopod.
But recently, the network stopped, and I asked some experts, they said it need new OS (They ment to re-flush the ROM).
I tried with the same Dopod that was successful before, and its now stucked on 11%.
I even downloaded the Telstra but the same, it stucked on 13%.
This is my entire story, and still I am trying to get it up.
Thanks alot for your helping. nice of you.
And for all who read my post, if they had such experience before, please help.
Hello ultramag69,
Thanks alot for your reply.
Having my i-mate dead, is really interesting.
I am trying to recover it up, Mine came with (HTC) logo when booting, and I did flushed it with Dopod.
But recently, the network stopped, and I asked some experts, they said it need new OS (They ment to re-flush the ROM).
I tried with the same Dopod that was successful before, and its now stucked on 11%.
I even downloaded the Telstra but the same, it stucked on 13%.
This is my entire story, and still I am trying to get it up.
Thanks alot for your helping. nice of you.
And for all who read my post, if they had such experience before, please help.
If you can, try to find the original SHIPPED STOCK ROM. It may be your Hermes won't be recoverable as the flash stopped in the radio rom part. Most people use a cooked rom as this has the radio rom part out.
I personally use the sd card method to flash my roms so there are no sync errors or accidents with my PC. But you need Hard SPL V7 installed to get that to work with any but the shipped rom.
DON'T try flashing anything but the shipped rom or you will loose all chances of recovering your Hermes.
The only other suggestion would be to flash the SHIPPED RADIO ROM, but you need to know what radio it was before you flashed it with the dopod rom.
Unfortunately the radio rom is the Achilles heel of our phone series. Any problems during flashing of that means we pretty much end up with a brick 99% of the time. Most people are stuck and the rest seem to have limited success reflashing the radio. AVERY small percentage get it working with no trouble, but its a REALLY small amount of people.
Good luck, Make sure you flash with the SHIPPED STOCK ROM to improve your chances of success.
Cheers...
Ultramag69, Thanks alot for your consideration.
Flusching using SD card didn't success with SPL V7.
I formatted my MicroSD card, 2GB with Fat32 FS.
After that I copied the file that came with the zip archive (RUU_signed.nbh) and renamed as required: (herming.nbh).
And I put it in my i-mate, and holded the (Power + OK under flyweel) then restarted using the stylus, It showed me the tri-color screen, then it shows (Loading...) with Gray background screen (Which is normally the flusching screen) but it returned to the tri-color screen.
Any suggestions to get this SPL V7 installed successfully ?
I tried with all my (.nbh) files that I have downloaded from all sources, but its the same screen.
I think something is really wrong with me i-mate, should I take it to some Hard-ware service center ? and what can be damaged and need to be replaced in such cases ?
I am very excited in getting it working again.
Thanks alot.
Cheers...
I had bricked my Hermes a couple o' times, because of a rom I cooked half-way ( LOL ). Each time I had to flash back to the stock rom as suggested. Don't lose hope, cuz there's some people who will tell you just to accept it as bricked. You could also take the sucker apart and use jtags to flash. Most types of bricks can be solved when it comes to the Hermes. There's a thread somewhere that polled the different types of bricks, and except for radio bricks, most can be solved. If you unbrick it try 6.5 .... !!! My rom is cooked all the way now
Arwany, did you run the SSPL.exe file in the sd card instructions for Hard SPL found on page 116, post 1160 of the Hard SPL thread? You need a version of Soft SPL (SSPL) to flash using the sd card as the CID must be bypassed. The reason we Hard SPL our Hermes is because its safer. Its worthwhile flashing the SPL using unsafe SSPL (even if you use the pc you have Soft SPL installed) as its a short flash, flashing a rom (especially stock roms with the radio rom inside) is a riskier and longer flash.
Cheers...
I had the same problem.. All you have to do is establish a connection with Actisync, then run the Updater. There will be 3 colors on your Screen, sont worry, just wait 10-15 min and your should be done with the setup.
Want to help
Arwany said:
Ultramag69, Thanks alot for your consideration.
Flusching using SD card........ with the zip archive (RUU_signed.nbh) and renamed as required: (herming.nbh).
And I put it in my i-mate..........
Click to expand...
Click to collapse
Hi,Just to tell You that I've noticed a little spelling mistake.You've written "herming.nbh" But it should be "Hermimg.nbh".
Not the 1st person to make that mistake, and probably won't be the last.....
Hi All,
Yeah, that worked out for me, I could successfully flush my JasJam with that.
Thanks for your reply.
I am still facing problem when trying to flush with other OS, its always stuck on the GSM line.
I am using the SD flush method.
Any suggestions ?
THank s alot for your help!
If you have the no GSM problem the only way to, maybe, fix is to flash the original SHIPPED STOCK ROM, or the original radio rom. Flashing anything else may result in a permanent brick...
If it doesn't succeed then, sorry, its not repairable. Can be used as a PDA but not as a phone ever again.
Cheers...
Thansks Ultramag69, for all the helps, It solved my main problem.
You also Ekonkar, your comments was so helpful.
I will try to do some hardware repairing in some Mobile shop, they may get it up again !
To fix it will cost more than to get a new device... They'll tell you they can't fix it or it needs a new mainboard. Will still cost you for this nugget of info. My advice, buy a Hermes off ebay, either working or not. If its not, make sure its screen related problem cos you have the parts to fix... Unless your screen has gone bung too...
Cheers...
I gave it to the repairing guy, he replaced the GSM item and its up and running now for only 20$.
Prost :-D
Sweet, You should post where and what country so others in the same situation might be able to get their Hermes up & running.
I got an iMate JASJAM from my father awhile back - a great hand-me-down if you ask me!
It's currently running Windows Mobile 5 w/ default just about everything.
HERM100
IPL-1.01
HERM100
SPL-1.11
Anyway, onto my problem.
I'm using the Hard SPL upgrade files found in Olipro's thread.
I run it and it works up until I select "Yes" on my device.
It then reboots into the bootloader and just sits there and does nothing until finally the installer throws an error 260.
Anyone else had this problem?
Is there a simple fix?
If it makes any difference, I've got a Mini-SD card in it. 512mb.
Go to the Hard SPL thread, page 116, post 1160. It tells you (and gives all apps needed) how to install using the SD card... Gets rid of those pesky sync problems.
You can use the sad card method to upgrade your os too, just drop the steps using sspl.exe....
Cheers...
wonderbreadz said:
I got an iMate JASJAM from my father awhile back - a great hand-me-down if you ask me!
It's currently running Windows Mobile 5 w/ default just about everything.
HERM100
IPL-1.01
HERM100
SPL-1.11
Anyway, onto my problem.
I'm using the Hard SPL upgrade files found in Olipro's thread.
I run it and it works up until I select "Yes" on my device.
It then reboots into the bootloader and just sits there and does nothing until finally the installer throws an error 260.
Anyone else had this problem?
Is there a simple fix?
If it makes any difference, I've got a Mini-SD card in it. 512mb.
Click to expand...
Click to collapse
i got your problem on my i-mate jasjam too,
have u solve the problem yet?
i face the same problem
Well I flashed maybe 30 HTC Tytn PDA`s (I work in service) and never bricked any... I never putted cooked roms,bcs this roms are stupid.And a lot of cooked roms use much more ram and many of them have simple appcliations,which you can to install alone... So,my advice for peoples : Use official Win Mobile 6 rom from HTC ftp server.You can find links in this forum also...And yeah I dont need HARD SPL for official... never bricked.
Depends slaki85 if the Hermes has been Branded... For example, I have the Telstra rom on my Jasjam, if I tried to put the HTC official rom onto it, I'd have a brick... The carrier rom prevents me putting any other rom on it other than theirs.... And it ALWAYS has a heap of bloatware.
You also can't put wm6.5 on...
Hard SPL allows me to put other roms, cooke or official, that I can't put on without ending up with a brick.
As for the guys who can't put Hard SPL on, use the sd card method as I said before. Its easier, means there's less chance of a brick and takes 2 secs...
ultramag69 said:
Depends slaki85 if the Hermes has been Branded... For example, I have the Telstra rom on my Jasjam, if I tried to put the HTC official rom onto it, I'd have a brick... The carrier rom prevents me putting any other rom on it other than theirs.... And it ALWAYS has a heap of bloatware.
You also can't put wm6.5 on...
Hard SPL allows me to put other roms, cooke or official, that I can't put on without ending up with a brick.
As for the guys who can't put Hard SPL on, use the sd card method as I said before. Its easier, means there's less chance of a brick and takes 2 secs...
Click to expand...
Click to collapse
Yeah,you are in right with 6.5 WinMo...I really tryed before Win 6.5,and expect few visual changes,he dont have anything new..With 6.5 or 6.5 + Manilla-TouchFLo,TyTN is very slow...what to say about ram memory...sometimes and 15 MB more busy...I understand that peoples always will put new rooms,I only dont understand why peoples risk...Expect if some win dont have some big changes.byw if someone want to put official HTC 6.0 rom,I tryed many times with 100% sucess in HTC TyTN and SPV M3100 (also TyTN but from postpaid Operators)..
I also agree that is HARD SPL good sometimes.I only dont understand why peoples change roms... : P especially custom roms...(few apps more and speed,ram slower...).But probablly I am subjective : )
Again, if you have a carrier rom they tend to overload it with bloatware, software and apps that use their sites. It tends to slow down the hermes and, truth be told, I've started with less than 15Mb ram using the stock rom... When you have that happen, cooked roms are a much better alternative. Also, if you use the apps cooked in it means you don't have to hunt down the cabs yourself....
Much easier....
Hi all. Just wanted to let everyone know: NEVER GIVE UP. I task2a my htc leo twice (different times) and "BRICKED" it in that I could not flash any rom back to it. It has HSPL3 and trying everything including removing HSPL and going back to SSPL (HSPL 2.08.0000) I got nowhere. NO ship/stock or custom roms would flash at all by USB and when done by LEOIMG.NBH I'd get RADIO_V2 RSA FAIL etc. I tried using the various RUU executable: Romupdateutility.exe, CustomRUU.exe, ruu.exe (dexter series), and still had problems. I never lost HSPL or bootloader however... In the end I solved it like this:
1) CRITICAL YOU HAVE A FULL BATTERY FIRST AND FOREMOST ELSE IT DOESNT WORK OR UPDATE AT ALL. USE EXTERNAL CHARGER/OTER PHONE.
2) I connected by MTTY and re-did Task 2a, and a Task 28, Task 28 55 aa, and then a task 29.
3) I kept trying various different LEOIMG.NBH files including RADIOs, Custom roms with only OS.NB inside, etc etc etc.
4) In the END:
You will have to use your LEOIMG.NBH on <4gb SD CARD from the STOCK default rom the phone came with....
But: It will probably not (for some reason) work first TEN or so times !!! (weird?)
I kept trying doing ruu.exe in between each SD card attempt and also kept removing/swapping HSPL/2.08.0000 and going in and out of MTTY doing 2a, 28, and 29 OVER AND OVER AND OVER. Ultimately I know this is confusing (my explanation) but I am simpy saying my leo was gone and I did not give up so DO NOT GIVE UP. I sat there 12 hours+ doing this over and over and GOT IT BACK TWICE NOW (yes - I did 2a task twice for certain reasons)... USEFUL ROMS/APPS:
Task29.exe (containg single checksum-ok but BLANK - ruu_signed.nbh)
Telstra Stock ROM
Telstra (HTC website) signed update ROM.
Latest LEO radio
Dexter-with CHT2 and companion ruu.exe (used with dexter and other .nbh)
Xanny-Tech-Evolution via SD Card.
HSPL3_PKG.EXE
magldr 1.11 (by RUU and SD).
In the end YOU WILL FIX IT OK. I'm pretty tired now so I will go over this and clean it up later but KEEP PERSISTING AND HAVE FAITH: if you have HSPL and MTTY and SD you can and you will fix it.
---
edit:
OK, after stock telstra LEOIMG.NBH ok... wanted magldr back... did hspl3... fine... then did Task29.EXE(for radio rom 2.08 576 ram ok) by the EXE/RUU: DO NOT DO THIS... it fails and you have to start again:
after task29.exe (radio 2.08 not-MTTY) with FAILURE - I put the ruu_signd.nbh for this onto SD card and flash - fine. Then did MAGLDR.NBH the same (LEOIMG.NBH) and all OK. Then clockwork and update.zip for PPC-Windows7-Android.
----
Thanks DFT and Cotulla.
Hurry up and release NAND WP6 and WP7 NAND boot
Making donation $.
Cool that it works for you. But the steps in your description does not give me enough confidence that it will work for anyone else.
Or maybe someone else can verify this method?
Nice!
This was very inspiring! I hope it does work for everyone. As for me I did try for the nth time and well no luck for me, tried a lot of variations, roms, task29, radios but still unsuccessful. Guess for me customer service is the only way. Good luck to the others!
i have my friend device which is in similar situation tried everything but it dont wont work. dont know how to fix. my friend cant even go to tmo since he bought off ebay.
shah_vm said:
i have my friend device which is in similar situation tried everything but it dont wont work. dont know how to fix. my friend cant even go to tmo since he bought off ebay.
Click to expand...
Click to collapse
Just send it through tmo repair center, its gonna cost $120-$170
Hi guys, i'm stuck on:
PB81100 HX-BC
SPL-2.0.8.HSPL 8G XE
RIFFBOX 0x05
and white screen without htc logo, can i solve this? or it is bricked up?
Thanks in advance
the same here
I got out of bricked situation by extracting only the SPL file from the stock rom using OS builder.Renamed it leoimg.nbh and flashed it using SD card 2 GB /sandisk/.It appeared stuck on the "loading" screen and I had to remove the battery not sure if I'd succeeded.The first sign that something might have gone right was the green light showing fully charged battery,cause despite "common sense" I put the battery back in and put the phone to charge.After taht I used the RUU_signed file from the same stock rom I took the SPL from.
i must try harder...
i spend already to much hour on this pr ...i dont give up
i connect MTTY via USB button in win 7 i make this command task 2a , task 28 ,29
i want to find a STOCK ROM for my phone but i can't find a good one CID is HTC___001
i need a GOLD card i think... to unlock
after i make the info 8 cmd in MTTY window last line say OS not FOUND ...